Getting a jitter on a single letter in oscillating text

I've made this really cool logo that has a 45degree oscillation behavior on it. About a second before it flys off the screen "o" in the word vote jitters one pixel up. Can't figure out what is happening has anyone else experienced this.

Yes, it happened to me. Couldn't figure it out, so I rebuilt that scene and the problem went away. Maybe it was corrupt in some way.

Similar Messages

Exchange 2010 webmail - contact search returns an error when single letter is used

Exchange 2010 SP2 environment. In Webmail when a user creates a new message, pressing on the To: button to add recipients, if they search the GAL, a single letter search (A for example) returns all names starting with A.
If they try to perform the same search for their contacts they get: No results found in IE or the error below in Firefox and Chrome. If I search contacts with two letters "Ab" for example then no error occurs and I get results. So search doesn't work
the same way for contacs vs GAL. Is this normal for webmail 2010?
An unexpected error occurred and your request couldn't be handled.
Request
Url: https://webmail.contoso.com:443/owa/ev.owa?oeh=1&ns=CP&ev=LoadFresh&pfmk=M35:1407960692770;M2:1407960692796;M23:1407960694745
User host address: 10.1.3.9
User: User Name
EX Address: /o=xxxxxxx/ou=First Administrative Group/cn=Recipients/cn=username
SMTP Address: [email protected]
OWA version: 14.2.247.5
Mailbox server: MBX1.contoso.com
Exception
Exception type: System.NullReferenceException
Exception message: Object reference not set to an instance of an object.
Call stack
Microsoft.Exchange.Clients.Owa.Premium.Controls.VirtualListView2.GetDidLastSearchFail()
Microsoft.Exchange.Clients.Owa.Premium.Controls.VirtualListView2.LoadData(Int32 startRange, Int32 rowCount)
Microsoft.Exchange.Clients.Owa.Premium.Controls.AddressBookVirtualListView.LoadData(Int32 startRange, Int32 rowCount)
Microsoft.Exchange.Clients.Owa.Premium.VirtualListViewEventHandler2.InternalLoadFresh(Boolean renderHeaders)
Microsoft.Exchange.Clients.Owa.Premium.ContactVirtualListViewEventHandler.LoadFresh()

I doesn't happen on mine, but I'm now on SP3. It might help if you upgrade - even if you don't want to go to SP3 yet, your OWA version appears not to be at rollup 2 level. I only mention this because if it is a problem specific to version 14.2.247.5 (which
could easily be the case, because MS change the OWA scripts with surprising frequency) , it's going to be hard finding people who can reproduce the problem.
But to answer the question in the last sentence, searching the GAL and searching Contacts is, in a technical sense, very different. The GAL search is done with an LDAP query against Active Directory, whereas Contacts are usually going to be mailbox items,
plus a few AD contact items.
OWA For SmartPhone

How can i get all these values in single row with comma separated?

I have a table "abxx" with column "absg" Number(3)
which is having following rows
absg
1
3
56
232
43
436
23
677
545
367
xxxxxx No of rows
How can i get all these values in single row with comma separated?
Like
output_absg
1,3,56,232,43,436,23,677,545,367,..,..,...............
Can you send the query Plz!

These all will do the same
create or replace type string_agg_type as object
2 (
3 total varchar2(4000),
4
5 static function
6 ODCIAggregateInitialize(sctx IN OUT string_agg_type )
7 return number,
8
9 member function
10 ODCIAggregateIterate(self IN OUT string_agg_type ,
11 value IN varchar2 )
12 return number,
13
14 member function
15 ODCIAggregateTerminate(self IN string_agg_type,
16 returnValue OUT varchar2,
17 flags IN number)
18 return number,
19
20 member function
21 ODCIAggregateMerge(self IN OUT string_agg_type,
22 ctx2 IN string_agg_type)
23 return number
24 );
25 /
create or replace type body string_agg_type
2 is
3
4 static function ODCIAggregateInitialize(sctx IN OUT string_agg_type)
5 return number
6 is
7 begin
8 sctx := string_agg_type( null );
9 return ODCIConst.Success;
10 end;
11
12 member function ODCIAggregateIterate(self IN OUT string_agg_type,
13 value IN varchar2 )
14 return number
15 is
16 begin
17 self.total := self.total || ',' || value;
18 return ODCIConst.Success;
19 end;
20
21 member function ODCIAggregateTerminate(self IN string_agg_type,
22 returnValue OUT varchar2,
23 flags IN number)
24 return number
25 is
26 begin
27 returnValue := ltrim(self.total,',');
28 return ODCIConst.Success;
29 end;
30
31 member function ODCIAggregateMerge(self IN OUT string_agg_type,
32 ctx2 IN string_agg_type)
33 return number
34 is
35 begin
36 self.total := self.total || ctx2.total;
37 return ODCIConst.Success;
38 end;
39
40
41 end;
42 /
Type body created.
[email protected]>
[email protected]> CREATE or replace
2 FUNCTION stragg(input varchar2 )
3 RETURN varchar2
4 PARALLEL_ENABLE AGGREGATE USING string_agg_type;
5 /
CREATE OR REPLACE FUNCTION get_employees (p_deptno in emp.deptno%TYPE)
RETURN VARCHAR2
IS
l_text VARCHAR2(32767) := NULL;
BEGIN
FOR cur_rec IN (SELECT ename FROM emp WHERE deptno = p_deptno) LOOP
l_text := l_text || ',' || cur_rec.ename;
END LOOP;
RETURN LTRIM(l_text, ',');
END;
SHOW ERRORS
The function can then be incorporated into a query as follows.
COLUMN employees FORMAT A50
SELECT deptno,
get_employees(deptno) AS employees
FROM emp
GROUP by deptno;
###########################################3
SELECT SUBSTR(STR,2) FROM
(SELECT SYS_CONNECT_BY_PATH(n,',')
STR ,LENGTH(SYS_CONNECT_BY_PATH(n,',')) LN
FROM
SELECT N,rownum rn from t )
CONNECT BY rn = PRIOR RN+1
ORDER BY LN desc )
WHERE ROWNUM=1
declare
str varchar2(32767);
begin
for i in (select sal from emp) loop
str:= str || i.sal ||',' ;
end loop;
dbms_output.put_line(str);
end;
COLUMN employees FORMAT A50
SELECT e.deptno,
get_employees(e.deptno) AS employees
FROM (SELECT DISTINCT deptno
FROM emp) e;
DEPTNO EMPLOYEES
10 CLARK,KING,MILLER
20 SMITH,JONES,SCOTT,ADAMS,FORD
30 ALLEN,WARD,MARTIN,BLAKE,TURNER,JAMES
CREATE OR REPLACE FUNCTION concatenate_list (p_cursor IN SYS_REFCURSOR)
RETURN VARCHAR2
IS
l_return VARCHAR2(32767);
l_temp VARCHAR2(32767);
BEGIN
LOOP
FETCH p_cursor
INTO l_temp;
EXIT WHEN p_cursor%NOTFOUND;
l_return := l_return || ',' || l_temp;
END LOOP;
RETURN LTRIM(l_return, ',');
END;
COLUMN employees FORMAT A50
SELECT e1.deptno,
concatenate_list(CURSOR(SELECT e2.ename FROM emp e2 WHERE e2.deptno = e1.deptno)) employees
FROM emp e1
GROUP BY e1.deptno;
DEPTNO EMPLOYEES
10 CLARK,KING,MILLER
20 SMITH,JONES,SCOTT,ADAMS,FORD
30 ALLEN,WARD,MARTIN,BLAKE,TURNER,JAMES
CREATE OR REPLACE TYPE t_string_agg AS OBJECT
g_string VARCHAR2(32767),
STATIC FUNCTION ODCIAggregateInitialize(sctx IN OUT t_string_agg)
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateIterate(self IN OUT t_string_agg,
value IN VARCHAR2 )
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateTerminate(self IN t_string_agg,
returnValue OUT VARCHAR2,
flags IN NUMBER)
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateMerge(self IN OUT t_string_agg,
ctx2 IN t_string_agg)
RETURN NUMBER
SHOW ERRORS
CREATE OR REPLACE TYPE BODY t_string_agg IS
STATIC FUNCTION ODCIAggregateInitialize(sctx IN OUT t_string_agg)
RETURN NUMBER IS
BEGIN
sctx := t_string_agg(NULL);
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateIterate(self IN OUT t_string_agg,
value IN VARCHAR2 )
RETURN NUMBER IS
BEGIN
SELF.g_string := self.g_string || ',' || value;
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateTerminate(self IN t_string_agg,
returnValue OUT VARCHAR2,
flags IN NUMBER)
RETURN NUMBER IS
BEGIN
returnValue := RTRIM(LTRIM(SELF.g_string, ','), ',');
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateMerge(self IN OUT t_string_agg,
ctx2 IN t_string_agg)
RETURN NUMBER IS
BEGIN
SELF.g_string := SELF.g_string || ',' || ctx2.g_string;
RETURN ODCIConst.Success;
END;
END;
SHOW ERRORS
CREATE OR REPLACE FUNCTION string_agg (p_input VARCHAR2)
RETURN VARCHAR2
PARALLEL_ENABLE AGGREGATE USING t_string_agg;
/

How can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

We need the Request Restart ability when scheduling a single reoccurring job in Redwood. Most of our jobs are scheduled in CHAINs which offers the Final Status Handler on Step level, and the schedule is "paused" when a job in the CHAIN has failed ( the next instance does not populate until the OP MSG has been Replied to) , and once the OPERATOR message is replied to, the CHAIN can resume running again ( desired ) . But we need this same ability when scheduling a single job not in a CHAIN. In our testing, we set up a job with Request Restart chosen on the Error , Killed and Unknown selections on the Restart Behavior Tab. But we found when a job is scheduled say once a day at 8AM, and when it fails, an OPERATOR msg appears allowing a Restart choice ( desired), but the next day's schedule also populates ( undesired) and we do NOT want the schedule to continue on yet because we need a chance to fix the error before the next insance runs for business reasons. So how can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

Hello Fran,
You can wrap the job chain in a master job chain in the first step and set the final status handler there.
You can also set the Restart Behavior to 'Stop Submit Frame', in that case you will have to resubmit the job once you are finished troubleshooting.
Regards Gerben

How to modify the query to get the output in a single row

Hi All,
Below is the query i have written it works fine
select DISTINCT right(left(CTACCT,13),4) AS LocationNum,
tODS_GLBalance.FiscalYearId AS FiscalYearId,
tODS_GLBalance.FiscalMonthOfYearId AS FiscalMonthOfYearId,
--tods_GLMetadata.Metric,
Case when
tods_GLMetadata.Metric = 'Gross Margin'
Then SUM(Balance)
Else 0
END AS GrossMargin,
Case when
tods_GLMetadata.Metric = 'Occupancy'
Then SUM(Balance)
Else 0
END AS Occupancy,
Case when
tods_GLMetadata.Metric = 'Payroll Dollars'
Then SUM(Balance)
Else 0
END AS Payroll,
Case when
tods_GLMetadata.Metric = 'CF Sales'
Then SUM(Balance)
Else 0
END AS OperatingSales,
Case when
tods_GLMetadata.Metric = 'Operations'
Then SUM(Balance)
Else 0
END AS OperatingExpenses
-- 0 as payroll
from ods.[JJill].[tODS_GLBalance]
inner join ods.Staging.tODS_INF_GLPCT ON tODS_GLBalance.PageNum = tODS_INF_GLPCT.CTPAGE
inner join ods.JJill.tods_GLMetadata ON tods_GLMetadata.AcctDescription = tODS_INF_GLPCT.CTDESC
where
(tODS_GLBalance.FiscalYearId = 2012) and
(tODS_GLBalance.FiscalMonthOfYearId = 2) and
(right(left(CTACCT,13),4)= 3020)
group by
right(left(CTACCT,13),4),
tODS_GLBalance.FiscalYearId,
tODS_GLBalance.FiscalMonthOfYearId,
tods_GLMetadata.Metric
This is the sample output,
LocationNum FiscalYearId FiscalMonthOfYearId GrossMargin Occupancy Payroll OperatingSales OperatingExpenses
3020 2012 2 -112477.00 0.00 0.00 0.00 0.00
3020 2012 2 0.00 0.00 0.00 -158288.94 0.00
3020 2012 2 0.00 0.00 0.00 0.00 5625.44
3020 2012 2 0.00 0.00 24185.79 0.00 0.00
3020 2012 2 0.00 31075.53 0.00 0.00 0.00
But, i am expecting the output to be something like this
LocationNum FiscalYearId FiscalMonthOfYearId GrossMargin Occupancy Payroll OperatingSales OperatingExpenses
3020 2012 2 -112477.00 31075.53 24185.79 -158288.94 5625.44
Can someone please help me with changing my query to get the desired output?
Please let me know if you have any questions.
Thanks

Try this:
SELECT DISTINCT
RIGHT(LEFT(CTACCT,13),4) AS LocationNum, tODS_GLBalance.FiscalYearId AS FiscalYearId, tODS_GLBalance.FiscalMonthOfYearId AS FiscalMonthOfYearId,
SUM(CASE WHEN tods_GLMetadata.Metric = 'Gross Margin' THEN Balance ELSE 0 END ) AS GrossMargin,
SUM(CASE WHEN tods_GLMetadata.Metric = 'Occupancy' THEN Balance ELSE 0 END ) AS Occupancy,
SUM(CASE WHEN tods_GLMetadata.Metric = 'Payroll Dollars' THEN Balance ELSE 0 END ) AS Payroll,
SUM(CASE WHEN tods_GLMetadata.Metric = 'CF Sales' THEN Balance ELSE 0 END ) AS OperatingSales,
SUM(CASE WHEN tods_GLMetadata.Metric = 'Operations' THEN Balance ELSE 0 END ) AS OperatingExpenses
FROM ods.[JJill].[tODS_GLBalance]
INNER JOIN ods.Staging.tODS_INF_GLPCT
ON tODS_GLBalance.PageNum = tODS_INF_GLPCT.CTPAGE
INNER JOIN ods.JJill.tods_GLMetadata
ON tods_GLMetadata.AcctDescription = tODS_INF_GLPCT.CTDESC
WHERE tODS_GLBalance.FiscalYearId = 2012
AND tODS_GLBalance.FiscalMonthOfYearId = 2
AND RIGHT(LEFT(CTACCT,13),4) = 3020
GROUP BY right(left(CTACCT,13),4), tODS_GLBalance.FiscalYearId, tODS_GLBalance.FiscalMonthOfYearId, tods_GLMetadata.Metric

Getting Data Off Harddrive in Single User Mode

When my PowerBook G4 running 10.3.9 boots after the white apple screen I just get a blue screen and my mouse. I am able to boot into single user mode and get to the data on my harddrive. My other computer at home is a linux box so if I could just get the network going in single user mode I could ssh all of my stuff to the other machine. Is there any way to do this. Is there any other good way to recover my data?

Hi dsignoff,
   This is likely to be more difficult than it sounds. If the problem isn't a failed hard drive, you might have an easier time simply doing an archive-and-install. Of course any installation except a fresh install will preserve your home directory but an "update" installation stands a reasonable chance of not fixing the problem.
   Even if you do succeed in moving everything to the linux box, you will likely lose the resource forks and file metadata of the files.
   Of course even if you do try an archive-and-install, it never hurts to have some backup. I'm a bit rusty with Panther but I believe that it requires the following as a first step:
/usr/libexec/registermach_bootstrapservers /etc/mach_init.d
That actually starts quite a bit of the system, possibly including the part that is causing Aqua to fail to start up. (meaning that it too could fail) However, if the above command succeeds, the next step is to execute:
/sbin/SystemStarter start Network
You may also need:
/sbin/SystemStarter start NetworkExtensions
If all of that works, you should have enough services available to ssh to the Linux box and move files. Of course there is a chance that if you find the error messages of the process that is failing in the /var/log/system.log, we could actually recommend a fix for the system.
Gary
~~~~
   "The wages of sin are death; but after they're
   done taking out taxes, it's just a tired feeling:"

I like to edit single letter in the pdf file having more then 1000 page, Example "T" in place of "V" in all the 1000 pages in pdf file. Please let me know

I like to edit single letter in the pdf file having more then 1000 page, Example "T" in place of "V" in all the 1000 pages in pdf file. Please let me know !

In a PDF you can´t change single letter.
You can only try to convert the PDF document into a Word document.
Now you can search and replace a letter.

How can I get Mail to capitalise the first letter of a sentence?

Hello all,
this is my first time using apple Support Community. i am a new apple user and have just got my first MacBookPro (its wonderful). however, i am having some difficulties.
How can i get Mail to capitalize the first letter of a sentence and also capitalize 'i' as 'I' automatically?
Also, how can i get apps like Pages to do the same? and for that matter typing into internet sites like this one? look at the lack of automatic punctuation!!
Thank you all for any advice and tips you may have.
Paul.

I don't think whether it's easier or not is really an issue. The problem is that all of these wonderful technologies are taking away our understanding of how to communicate in writing. It's not a matter of being lazy and not "wanting" to do it, but rather getting to a point where many people "can't" do it.
I certainly wasn't pointing any fingers. I use a calculator (or computer if I happen to be on one at the time) to do the most basic math calculations. I can be out to lunch with co-workers and we have to pull out a calculator to split a bill 4 ways. I went through school at a time when calculators were not permitted. So, at one time, I could have easily done all of that stuff in my head. So far as math goes, my mind has turned to mush a long time ago. I doubt I could work my way through a long division problem at this point... even if I sat there and really tried.
Computers were not generally consumer items when I was growing up. So I didn't grow up in a world with spell checking. I have certainly grown to use it though and I'm sure my ability to spell properly has diminished somewhat because of it. I tend to be less careful when typing something out. If I'm not sure of the spelling on something, I just let my computer either fix it or give me a suggestion for the corrected spelling. Fortunately, I grew up having to rely on my own ability to spell, so with that foundation, I tend to do fairly well when it comes to spelling.
We're at a point now where systems can correct grammar and sentence structure. I think all of these are great tools to help us out, but they shouldn't be used to take the place of actually knowing how to do things. Having said that, I'm fairly sure that is exactly what will happen. Just as today, I rely almost entirely on some form of electronics for everyday math, I'm sure people growing up today with expert systems able to correct everything will rely on those equally.

When I turn on my wifi in top bar and connect,minutes later I get an annoying pop up notification letting me know I'm connected, AGAIN. It freezes everything including psswds and I have to start all over This is petty but how do I shut this popup off?

When I turn on my wifi in top bar and connect,minutes later I get an annoying pop up notification letting me know I'm connected, AGAIN. It freezes everything including psswds and I have to start all over. This is petty, but how do I shut this popup off?

What OS X version are you using?
Can you take a screenshot of the pop-up notification?
To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse button. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
If you can't find it on your Desktop look in your Documents or Downloads folder.
If you want to attach a screenshot to a response here, click the "camera" icon above the text field:
This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
⌘ Shift 4 and then pressing the space bar captures the window the cursor is on.
⌘ Shift 3 captures the entire screen.

Get the battery usage of single application programmatically in ios7 and later

Get the battery usage of single application programmatically in ios7 and later

Not natively with iOS. you might check the app store for a battery monitoring app, but to be honest, it you find one that claims to be able to do this, I'm nopt sure I would trust it.

QuickInfo shows a single letter instead of full variable name

Hi,
I have an isolated shell application based on VS2010 shell. The mouse over on a variable in debug mode gives the name of the variable and the value.
Now, I have ported the application to isolated shell VS2013, now the mouse over on a variable is not identifying the entire variable name instead identifies only the single letter in the variable name.
There has been no change in the source code.
Is there any special handling required for the new isolated shell?

How exactly did you "port" the application to the 2013 isolated shell?
The tooltip feature you describe is implemented by a custom language service package. So I'd start looking there.
I've never seen recommendations for porting from one version of the isolate shell to another. I typically just generate a new isolated shell package, then add in my various package implementations to the new solution, and add them to the ShellExtensionsVSIX
manifest.
Also, if you have a custom project type based upon MPF_Proj, you may also need to update those sources to the corresponding version of the MPF_Proj sources, as those are routinely updated to match up the major VS versions.
Sincerely,
Ed Dore

PDF's print two sided. How can I get them to print on single pages?

PDF's print two sided. There is no option shown. How can I get thelm to print on single pages?

1: Go into iTunes.
2: Right click on the song and choose 'Get Info' (or press cmd+i on a Mac).
3: In 'Info' change the album name to the one you want it to go into, when you start typeing it should automatically come up.
4: Check that the disk number and track number is correct. It should be automatic.
4: Press OK.
You should see it go into the album now.

As i type single letter it displays list of ids , how to overcome it ?

when ever i type a single letter to log in to gmail or yahoo it displays a list of email ids with that letter .
Is there any option to remove it so that it won't display any ids or won't remember any .
== Operating system ==
windows xp

See http://kb.mozillazine.org/Deleting_autocomplete_entries

Have done the iOS 5 update and lost some of my apps now can't get them back and won't let me register my wife's card on my account

Have done the iOS 5 update and lost half of my apps won't let me get them back and won't let me register my wife's card on my account as I don't use credit or debit cards
<Edited by Host>

Relax, nobody's ripping you off...
Apps are tied to the Apple ID you purchased them on and not the device so getting them all back is easy so long as you know the account details. To reinstall the apps just use the App Store and use the original Apple ID (account) that was used to purchase them, then re-install. If you setup a new Apple ID on your device when you initialized iOS 5 then go into the App Store app and change the account back to the one that was there before. Then go to update > Not on this iPhone and start installing...

Where is now Cooliris icon in Firefox 3.6.18? Last appeared in the top right but now I get the home icon. Please let me clarify it. Regards.

Where is now Cooliris icon in Firefox 3.6.18? Last appeared in the top right but now I get the home icon. Please let me clarify it. Regards.

Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long.

Getting a jitter on a single letter in oscillating text

Similar Messages

Maybe you are looking for