Getting a mapping error to propogate from loop block within I.P.

OK I kinda asked the question as a sub topic under a different heading SXMB_MONI_BPE -> Message Payload not visible in container but didnt really get an answer I'm happy with, so here goes as a main topic!
The short description:
I have a mapping step that must reside in a loop block, any mapping errors I want propogated back up to the main container so that they error and appear in the trace within SXMB_MONI in the same visibly obvious way as a mapping step that is not inside a block does.
The long description:
I have an Integration Process which splits a source message, then maps the individual messages produced within a forEach block. Unfortunately when there is a mapping error within the block, it does not propogate any meaningful information back to the message trace. Instead it just fails in smq2 with permanent error in inbound bpe processing.
When I search in SXMB_MONI_BPE there are no process steps returned, as though the IP was never called by the BPE.
When I put the whole thing inside a block with an exception path that has an alert step, I do get process steps returned in sxmb_moni_bpe. When I examine the list with technical details I cannot see any "payload" under the table of messages that has been split out, therefor I cannot debug the mappings of individual messages I am looping on. I have LOGGING, LOGGING_PROPOGATION and LOGGING_SYNC set to 1, and TRACE_LEVEL set to 3 for my IE.
I have 2 scenarios/requirements:
1) I put the uncaught mapping exception in the loop blook, and the error is propogated back up and the smq2 error is subsequently not produced (like it would behave if the mapping step was not inside any blocks).
2) I catch exceptions and raise an alert and then the logging is enhanced sufficiently to enable the individual messages the loop block is looping on to be viewed within the container in sxmb_moni_bpe->list with technical details.
The only place I can see the error is in the defaultTrace log file, which is obviously not a suitable method for productive use. Any solution needs to be usable in day-to-day administration of a production system, even though this is a dev issue at present!
Thanks,
James.

James
I have used this for throwing smart exceptions in SXMB_MONI
http://agportal.goldeye.info/index.php?option=com_content&task=view&id=30&Itemid=40
Not sure if it would work in this instance...
Barry @ Axon!

Similar Messages

I get a Runtime error when i try to search within the iTunes store

Please help! When in the iTunes store, I get a runtime error every time I try to use the search feature. I get a dialog box stating that Windows is searching for a solution, but then iTunes shuts down completely.

I have the same error, but I think we will get no solution for this problem.
You've get no answer here and the Apple support also doesn't send an answer how to solve the problem.
BTW I have also Windows 7 and the newest version of iTunes 64-bit.
Greetings Mike

Getting Java mapping errors when testing my Interface mapping

Hi,
I'm trying to test my interface mapping from IR, I keep getting these exceptions. All I'm doing in my interface mapping is I have two mapping programs a XSLT mapping with java helper functions with the XSL and a message mapping. In the test it pass thru the XSLT mapping but fails at Message mapping and throws the following exception. Any help on this is really appreciated.
10:03:26 Start of test
Call XSLT processor with stylsheet com/earthlink/xi/mapping/xmlc_to_crm_resp.xsl.
START APPLICATION TRACE ***
Response:
0
END APPLICATION TRACE ***
Returned form XSLT processor.
Call method execute of the application Java mapping com.sap.xi.tf._MM_XMLC_RESP_
Error during appliction Java mapping com/sap/xi/tf/_MM_XMLC_RESP_
java.lang.NullPointerException at com.sap.aii.mappingtool.tf3.AMappingProgram.exceptionCaught$(AMappingProgram.java:59) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:182) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:149) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrep.server.mapping.ibrun.RepJavaMapping.execute(RepJavaMapping.java:73) at com.sap.aii.ibrep.server.mapping.ibrun.RepSequenceMapping.execute(RepSequenceMapping.java:54) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.transform(MapServiceRemoteObjectImpl0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
10:03:26 End of test

Joe,
most likely your XSLT is outputting a not well-formed XML message.
Remove message mapping from the mapping list and execute it again, to check output.
Also, for mapping debugging in java enhanced function inside XSLT mappings, use the following:
1st, you need to pass the "inputparam" parameter from the XSLT runtime to the Java function (it needs to be one of the input parameters for the executed java function).
In the Java code itself, implement the following code:
AbstractTrace trace = (AbstractTrace) param.get(StreamTransformationConstants.MAPPING_TRACE);
trace.addInfo("Log your message here!");
where param is the input parameter refering to the inputparam from XSLT.
The AbstractTrace and StreamTransformationConstants classes can be found in the aii_map_api.jar file (used in Java mappings).
Regards,
Henrique.

Message Mapping Error : "already dropped from buffer"

Hi,
today we have a new strange error in a simple message mapping File2IDoc thats results in SYSFAIL.
Maybe a buffer or memory error?
In short:
+/ARTMAS05/IDOC/E1BPE1MARART[2]/DELN_DATE(suppressed field); root message: Index 2147483647 is already dropped from buffer. Cur offset is 2147483636+
In detail:
#2.#2010 08 18 10:49:51:619#+0200#Error#/Applications/ExchangeInfrastructure#
#BC-XI#com.sap.xi.util.misc#0026557C6A4004B6000000000000120D#229073650000000872#sap.com/com.sap.xi.services#com.sap.aii.ib.server.mapping.execution.JavaMapping#J2EE_GUEST#0#SAP J2EE Engine JTA Transaction : #0A1BAF81AA0111DF82D40026557C6A40#0a1baf81aa0111df82d40026557c6a40#0a1baf81aa0111df82d40026557c6a40#0#output#Java##
RuntimeException during appliction Java mapping com/sap/xi/tf/_xxxxx_Out_To_ARTMAS_ARTMAS05_A1_
Thrown:
com.sap.aii.mappingtool.tf7.MessageMappingException: Runtime exception when processing target-field mapping /ARTMAS05/IDOC/E1BPE1MARART[2]/DELN_DATE(suppressed field); root message: Index 2147483647 is already dropped from buffer. Cur offset is 2147483636
#2.#2010 08 18 10:52:45:149#+0200#Error#/Applications/ExchangeInfrastructure#
#BC-XI#com.sap.xi.util.misc#0026557C6A4004BA000000000000120D#229073650000000872#sap.com/com.sap.xi.services#com.sap.aii.ib.server.mapping.execution.JavaMapping#J2EE_GUEST#0#SAP J2EE Engine JTA Transaction : #0A1BAF81AA0111DF82D40026557C6A40#0a1baf81aa0111df82d40026557c6a40#0a1baf81aa0111df82d40026557c6a40#0#output#Java##
RuntimeException during appliction Java mapping com/sap/xi/tf/_xxxxx_Out_To_ARTMAS_ARTMAS05_A1_
Thrown:
com.sap.aii.mappingtool.tf7.MessageMappingException: Runtime exception when processing target-field mapping /ARTMAS05/IDOC/E1BPE1MARART[2]/DELN_DATE(suppressed field); root message: Index 2147483647 is already dropped from buffer. Cur offset is 2147483636
Thanks in advance,
André

Hi André, did you try to re-create de Message Mapping with the same source/target structures?
Regards,
Juan.

SmartView Problem: I get the following error when submitting from Excel

Table already exists. Unspecified error
 Table already exists.
This Upload File worked before. I have checked the Function and it looks fine.
I can "Refresh" but as soon as I "Submit" I get this error
Edited by: user6378062 on 2009/01/20 10:42 PM

Good morning,
Please, open a TAC service request to have this investigated further.
When you do, please, attach the exact steps you follow to get this error, as well as a sysreport from the Show and Share appliance.
Also, it would be good to confirm whether other users are also seeing the same error or not.
Regards
Daniel

I'm getting a cwinstr error after upgrading from labview 7.0 to labview 2010

Hello
recently upgraged a PC from Labview 7.0 pro to Labview 2010 pro. Now I can not open a calibration executable we been using for a xantrex xfr power supply (unfortunately I don't have source code). The only error I get is "cwinstr-can't load program" pop-up when trying to run the executable. The calibration SW will run on multiple platfroms, Win 95, Win 200 0 and XP and this is the first time getting this error. The calibration SW ran fine until the Labview 2010 install. My question is does LV 2010 change the registry files when loaded? Visa and MAX still run fine on this PC and were loaded when LV 7.0 was installled. I know the calibration SW uses the VISA drivers so this is what's confusing. i don't want to downgrade back to LV 7.0 unless I have to.
Thanks

Hello Tanya,
I'm a little confused here. i only started having issues with the executable (it ran previously with the visa drivers from 7.0) after I loaded LV2010. After the install, the exectuable started giving me the cwinstr error. As best I can tell, this may be an activex issue, but since I only have the executable it hard to tell.
My question id do i have to install both labview 7.0 in addition to labview 2010 on the pc. Fom the the readme file, it looks like Labview 2010 won't support certain vi's older than 8.0. But since I'm dealing with an exectuable only here, I thought I should be able to open it at least.
So instead of updating the visa drivers, should i re-install the old visa drivers (Ni-Max) for 7.0 instead? would this even work without removing LV2010.
Thanks Again

Flex - Getting the HTTP error code raised from SAP

Hi all,
is there a way to catch the error code returned by a BSP page?
For example, I have a Flex HTTPService that points to a BSP page somedata.xml, which is populated after retrieving data in onInitialization handler.
In this handler, if something goes wrong, I set up the response error code like this:
try.
"Data Handler Class
catch zcx_some_exc into lx_some_exc.
error_string = lx_some_exc->get_text( ).
response->set_status( code = 500 reason = error_string ).
endtry.
In my faultHandler function in Flex, I need to display error_string in an Alert box:
private function HTTPFaultEventHandler(event:FaultEvent):void{
Alert.show(event.fault.faultString);
But in this way, it always display "HTTP Request error".
Anyone can help me?
Thanks a lot,
R.

This is a known issue with flex HTTPService.
what you could do is
set the status to 200 for BSP response
and pass the error message in xml format.
on the flex side, in your result handler, check the xml to see whether its error xml or your normal result xml.
if its error xml, you can provide an alert and then stop processing.
Ref: http://onrails.org/articles/2008/02/20/dealing-with-http-errors-in-a-flex-with-rails-application
Regards
Raja

Frontierville wont load I get (security) (5) error everytime in a loop

The load page will show up and then a window with the character (Sam) will say something like "we lost internet connection, lets do a little reload" and then (security) (5)
when I click the accept button it tries to load up again and the same happens again. over and over!

[http://asqueella.blogspot.com/2010/12/dyld-unknown-required-load-command.html Here's an Explanation]. Basically you need to add "arch -i386 " at the beginning of the command because 10.5 is 32-bit only and more recent versions of Firefox default to 64-bit.

When waking from sleep getting "Device Removal" error on Lacie external

When waking from sleep getting "Device Removal" error on Lacie external drive. This drive is my Time Machine back-up and I don't want to lose it. I don't know if anyone else has seen this error. Let me know.

Getting this same error since switching from Firewire to USB. I have a Maxtor drive in an Adaptec enclosure. It has it's own power supply and both USB and Firewire 400 connections. Just upgraded to a new Mini from old Powerbook, so no more Firewire 400!
The big difference between USB and FW:
With the old PB G4 and Firewire, when I put it to sleep, I could hear the external drive actually spin down. On wake up, It would spin up and mount properly. Now with the Mini and USB, when I sleep the Mini, the external drive NEVER SPINS DOWN. I did some research and found that many drives have built-in power management that basically powers them down after some idle time. So the Mini is going to sleep with mounted drives, at some point later the drive sleeps itself, then when the Mini wakes, the drive's not there.
Obviously, Firewire is doing a better job of talking to my external than USB. I'm ordering a FW400-to-800 cable and will test this. I also think it has something to do with the chipset/firmware in the external enclosure, as many people are reporting their external USBs behave properly during sleep.

Mapping error in PI 7.4 dual stack

Dear Experts,
Recently we upgraded our system from PI 7.1 to PI 7.4 dual stack.
Scenerio is ECC->PI->SOAP(Webservice) synchronous
Issue in detail:
We are creating a invoice in ECC system through PI its updating in third party site using SOAP webservice and will get a reference number from that site and then updating in ECC as in synchronous way.
Invoice data's are reached PI sucessfully from ECC but it not updating in the site and getting below mapping error after upgarded to PI 7.4.
Your points will be highly appreciable.
Kindly help to sort out this issue.
Best Regards,
Monikandan

Hi Monikandan,
It seems you are trying the sign the payload in your java mapping. So, looking at the attached error, there could be 2 possibilities:
1) Either there is no certificate with alias: *_PRD
2) This certificate is stored in some "System" type keystore view which is not accessible from you mapping code. Try to move your certificate to some "User" keystore view.
Thanks & regards,
Piyush

IDOC Serialization(EOIO) using IDOC Adapter throwing Mapping error

Hello SDN Gurus,
The scenario I am working on is IDOC(PAYEXT & EUPEXR) --> XI (ABAP Mapping) --> Flat File (IDOC Structure).
The IDOCS produced in Appl system may be in the following order
PAYEXT
PAYEXT
EUPEXR
PAYEXT
PAYEXT
PAYEXT
EUPEXR
I need them to be processed in the same order into flat file.
The scenario is working good except for the serialization. So I did the following
Created two entries in IDXQUEUE one for each message type with the same Queue name in XI system.
Created a new rule for the queue and an associated function module. Used this rule in partner profile for both the message types. I used the following link to create the above two steps.
/people/community.user/blog/2006/11/04/how-to-serialize-idoc-xml-messages-fed-into-xi
The SAP system in based on WAS 6.4.
I can see the queue name & EOIO in the inbound message header.
I am getting a mapping error in ABAP program. If I inactivate the queue(in Appl system SAP ECC), I don't get any error.
Does anybody had this problem earlier? Please advice.
Thanks
Srini Vaidyam

I found an OSS note to resolve my issue. The note number is 1057573.
Whenever the queue is activated, the sender system will not send the <TABNAM> field value in EDI_DC40 structure. This note addresses this problem.
I found out this by comparing the results from SXI_MAPPING_TEST individually for the message that failed after queue is activated and the message that was successful if the queue is inactivated.
Only thing I noticed now is even if you selected the radio button "Trasfer Immediately" in Partner profile of Appl. system, the messages are not sent. They are getting collected. So we need to manually push them out using WE14.
This forum Rocks.
Thanks.
Srini Vaidyam

Mapping error : strange problem

Hi all,
I am getting the mapping error in runtime.
I have tested in message mapping. It is successful there.
But I got the strange thing. When I change from design to test page and upload my XML file(from SXMB_MONI), all nodes in my structure are red! Now If I test the message mapping , I am getting the mapping error in SXMB_MONI.
May someone has a idea what's going wrong...
Thanks & Regards,
Sekhar.

Hi Sekhar,
If you test using an XML message saved from the sxmb_moni, you have to add 2 namespace tags around the content of the message. Something like this:
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
...message...
</ns0:Message1>
</ns0:Messages>
This is usually done internally by SAP XI, but in the test tool it is not..
Hope this helps!
(additional hint: First click "create instance" in the test tool. Check out the first two namespaces, usually messages and message1, and copy these in your test file. That should do the trick.:-) )
Regards,
Yordy
Message was edited by: Yordy Minderhoud

Mapping error MAPPING_DURING_EXECUTE

HI
I am getting a mapping error in sxmb_moni.
My mapping object in IR is
Source structure
MT_INPUT_GL dt_gl
doctype o to unound
docdate o to unbound
Destination structure
MT_OUTPUT_GL DT_GL_OUTPUT 1 to 1
doctype o to unound
docdate o to unbound
I mapped MT_INPUT_GL to MT_GL_OUTPUT
and all the fields thereafter
My file conversion parameters are
document name MT_GL_INPUT
document namespace http://FCE/FTM/GLInbound
recordsetname DT_GL_INPUT
recordsetnamspace http://FCE/FTM/GLInbound
recordsetstructure DT_GL_INPUT,1
recordsetsequence varible
recordset per message *
DT_GL_INPUT.fieldFixedLengths 2,10,10
DT_GL_INPUT.fieldSeparator ,
DT_GL_INPUT.fieldNames DocType,DocDate,PostingDate
can anybody help me by providing me sugesstion
Debraj

HI
Thanks for the so early reply.
I have checked the xml which has been generated in SXM_MONI it is different from the source one.How can i change the xml of input structure so that it matches.
My actual xml file of the input structure in IR design enviroment is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_GL_INPUT xmlns:ns0="http://FCE/FTM/GLInbound">
 <DocType>ccc</DocType>
 <DocDate>cc</DocDate>
 <PostingDate>tt</PostingDate>
 <Currency>y</Currency>
 <CompanyCode>yyu</CompanyCode>
 <Reference>u</Reference>
 <HeaderText/>
 <UserName/>
 <LedgerGroup/>
 <CDFlag/>
 <GLAcct/>
 <Amount/>
 <Text/>
 <ProfitCenter/>
 <CostCenter/>
 <WBS/>
 <InternalOrder/>
 <TPartner/>
 <Network/>
 <TranType/>
 <Class/>
 <ID/>
 
</ns0:MT_GL_INPUT>
but in sxmb_moni it is
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_GL_INPUT xmlns:ns="http://FCE/FTM/GLInbound">
- <ns:DT_GL_INPUT xmlns:ns="http://FCE/FTM/GLInbound">
- <DT_GL_INPUT>
<DocType>KR</DocType>
<DocDate>12 12 2005</DocDate>
<PostingDate>12 12 2005</PostingDate>
</DT_GL_INPUT>
</ns:DT_GL_INPUT>
- <ns:DT_GL_INPUT xmlns:ns="http://FCE/FTM/GLInbound">
- <DT_GL_INPUT>
<DocType>KR</DocType>
<DocDate>12 12 2005</DocDate>
<PostingDate>12 12 2005</PostingDate>
</DT_GL_INPUT>
</ns:DT_GL_INPUT>
- <ns:DT_GL_INPUT xmlns:ns="http://FCE/FTM/GLInbound">
- <DT_GL_INPUT>
<DocType>KR</DocType>
<DocDate>12 12 2005</DocDate>
<PostingDate>12 12 2005</PostingDate>
</DT_GL_INPUT>
</ns:DT_GL_INPUT>
- <ns:DT_GL_INPUT xmlns:ns="http://FCE/FTM/GLInbound">
- <DT_GL_INPUT>
<DocType>KR</DocType>
<DocDate>12 12 2005</DocDate>
<PostingDate>12 12 2005</PostingDate>
</DT_GL_INPUT>
</ns:DT_GL_INPUT>
</ns:MT_GL_INPUT>
Please let me know the solution it is a bit urgent.
Thanks
Debraj

Error while navigating from a report in OBIEE

I get the below error while navigating from one report to another report
Odbc driver returned an error (SQLExecDirectW).
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 16001] ODBC error state: 37000 code: 1101 message: [Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate a new page for database 'TEMPDB'
because of insufficient disk space in filegroup 'DEFAULT'. Create the necessary space by dropping objects in the filegroup
, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup..
[nQSError: 16015] SQL statement execution failed. (HY000).
Any inputs on this is highly appreciated.
Thanks,
Vasavi

Hi Vasavi,
There is no Temp space in Data base to run queries .Please contact your DBA to increase your db size
thanks,
saichand.v
Edited by: Saichand Varanasi on Jul 14, 2010 7:35 AM

Java.util.EmptyStackException Mapping error

Hi All,
I am integrating SAP ECC 6.0 system with SAP SNC.
For these i am using standard content of SAP SNC
I am getting following mapping error :
TransformerConfigurationException occurred when loading XSLT InvoiceRequest_InvoicInvoic01_01.xsl; details: Could not load stylesheet.com.sap.engine.lib.xml.util.NestedException: Error parsing query. -> java.util.EmptyStackException
Plz help me out
Regards Milan

hi,
check the interaface mapping which is used in your flow
inside integration repository - is it working over there?
do you see the XSL file in the external archives in repository?
Regards,
Michal Krawczyk
http://mypigenie.com XI/PI FAQ

Getting a mapping error to propogate from loop block within I.P.

Similar Messages

Maybe you are looking for