Getting a runtime error when running the test project

I was running a test project which did execute without any problems. Then I added 2 extra DLLs and wrote some code as well. After that I got the below specified run time error. Though I removed those DLLs and new code still it doesn't run. This was running
fine though. Please advice.
Warning: Test Run deployment issue: The assembly or module 'Npgsql' directly or indirectly referenced by the test container 'g:\services\communityservice\communityservicetest\bin\release\communityservicetest.dll' was not found.
Warning: Test Run deployment issue: The assembly or module 'IBM.Data.DB2' directly or indirectly referenced by the test container 'g:\services\communityservice\communityservicetest\bin\release\communityservicetest.dll' was not found.
Warning: Test Run deployment issue: The assembly or module 'Oracle.DataAccess' directly or indirectly referenced by the test container 'g:\services\communityservice\communityservicetest\bin\release\communityservicetest.dll' was not found.
mayooran99

@Mayooran99,
I agree with Andy. By the way, when you build a new test project and if you want to add dll to your project, please make sure you will follow this article:
https://msdn.microsoft.com/en-us/library/wkze6zky.aspx
When you use Add reference dialog please don't forget to set copy local to true.(By default I think new project will not have this problem, the reason may like Andy mentioned that you still have some references to those two dlls when you removed them)Best
regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • Get Internal Server Error when run the site

    the url of my site is :
    http://webdb.us.colorcon.com:7777/pls/portal30
    everything ran fine till yesterday. but i also created 2 new sites as follows :-
    http://webdb.us.colorcon.com:7777/pls/prtltest http://webdb.us.colorcon.com:7777/pls/prtltran
    the prtltest is a test site and
    the prtltran is a training site
    but when i log in to my original site today, i get Internal Server Error. i did the troubleshooting and the following URL failed :-
    http://webdb.us.colorcon.com:7777/servlet/IsItWorking
    the troubleshooting guide on OTN says the following maybe the cause :-
    The Apache JServ is not working correctly. Most "internal server errors" are related to Apache Jservs failure to start.(usually due to a port conflict).
    Please look at the following log files for details: Apache Listener log files in IAS_HOME/Apache/Apache/logs, and the
    Apache JServ log files in IAS_HOME/Apache/Jserv/logs.
    is it because the newsites share the same port number 7777 as the existing ones ?
    i looked at the log files and all it says is, some files not found.
    is there anything else i seem to be missing ?
    any help wouldbe appreciated.
    thanx
    null

    Are you using multiple listeners or just one? If you have multiple listeners, then you need to update the jserv.properties file for each with a distinct port. The default is 8007.
    If you are using one listener (which you can do) then the apache/jserv configuration is is wrong. What are the files that it says are missing?

  • Error when "run" the "helloworld" project

    Hello the expert,
    I am a newbie to the Weblogic. I am trying to setup a helloworld project on Eclipse using Weblogic server. When I "run" the project, I got the following error below. Could anyone please point me out what I did wrong on my setup?
    Thanks,
    Vincent
    My web.xml is as the following
    <?xml version="1.0" encoding="UTF-8"?>
    <web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID" version="2.5">
         <display-name>helloworld</display-name>
         <welcome-file-list>
              <welcome-file>home/index.jsp</welcome-file>
         </welcome-file-list>
    </web-app>
    =================================================================================
    <May 2, 2012 7:03:39 AM EDT> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application D:\first_Weblogicview\SoftwareRelease\Development\SourceCode\web\helloworld. Please make sure that the annotations are valid. The error is >
    <May 2, 2012 7:03:39 AM EDT> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1335956596075' for task '0'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'helloworld''
    weblogic.application.ModuleException: Failed to load webapp: 'helloworld'
         at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
         at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: javax.faces.webapp.UIComponentTag
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
         at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
         Truncated. see log file for complete stacktrace
    >
    <May 2, 2012 7:03:40 AM EDT> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating distribute task for application '_auto_generated_ear_'.>
    <May 2, 2012 7:03:40 AM EDT> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
    weblogic.application.ModuleException: Failed to load webapp: 'helloworld'
         at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
         at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: javax.faces.webapp.UIComponentTag
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
         at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
         Truncated. see log file for complete stacktrace

    Please include the JSF implementation files (jsf-api.jar, jsf-impl.jar) in the application (EAR file) APP-INF/lib, and then add the following in weblogic-application.xml:
    <prefer-application-packages>
    <package-name>javax.faces.*</package-name>
    <package-name>com.sun.faces.*</package-name>
    </prefer-application-packages>For more information on configuring filtering classloader, please review the below documentation:
    http://docs.oracle.com/cd/E23943_01/web.1111/e13706/classloading.htm#i1097253
    Arun

  • Getting time out error when running the assigned verification in DRM 9.3.2.

    Hi,
    I have installed DRM 9.3.2.0.0 in my system (windows 7), when i am trying to run assigned verifications i am getting the time out error within a minute.
    As suggested by oracle,I have added DWORD with value 480000 under Master Data Management in Registry editor. But still getting the error.
    Please suggest a solution for this issue.
    regards,
    sathiya

    Please suggest me the solution.
    regards,
    sathiya

  • When installing a NI 5112, I get an error message when running the test panel.

    I have recently decided to reinstall my PCI 5112 high speed digitizer in a different computer, for practical reasons. After having installed the software, hardware and successfully passing the self test, an error (10800) occurs when running the test panels. The signal applied to the channel and the different parameters used, worked fine with the previous computer but not with this one. Any idea why?
    Thanks,
    Thomas

    Hello Thomas,
       The error code you are getting is related to the board not recording enough samples in the given time interval.  May I ask which series of PCI card you are using. This can be found by looking at the device in Measurement and Automation Explorer and looking under devices and interfaces. The series letter is the one on the end of the number after the hyphen. E.g. PCI-MIO-16E-4 would be an E-series board.
    Also which versions of Measurement and Automation Explorerand NI-Scope are you running? Are these the same versions as you used in the old PC system? Sometimes an upgrade in the version is all that is required to fix such a problem but unfortunately it can sometimes cause a problem if you upgrade! It would depend on the versions you are currently running and the series of the board that you are using.
    LeeM
    AE,
     National Instruments
    Message Edited by LeeM on 10-31-2006 10:47 AM

  • Getting the below error when running the Baseline.grf for the first time

    I am getting the below error when running the Baseline.grf for the first time.
    Appreciate your support in resolving it.
    Error below:
    INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
    INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
    INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
    INFO [main] - Loading default properties from: defaultProperties
    INFO [main] - Graph definition file: graph/Baseline.grf
    INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
    INFO [main] - Checking graph configuration...
    INFO [main] - Graph configuration is valid.
    INFO [main] - Graph initialization (Baseline)
    INFO [main] - [Clover] Initializing phase: 0
    INFO [main] - [Clover] phase: 0 initialized successfully.
    INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
    INFO [WatchDog] - Starting up all nodes in phase [0]
    INFO [WatchDog] - Successfully started all nodes in phase!
    INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
    INFO [RUN_GRAPH1_0] - Checking graph configuration...
    INFO [RUN_GRAPH1_0] - Graph configuration is valid.
    INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
    INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
    WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
    java.lang.NullPointerException
         at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
         at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
         at org.jetel.graph.Phase.free(Phase.java:487)
         at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
         at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
         at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
         at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
         at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
         at org.jetel.component.RunGraph.execute(RunGraph.java:302)
         at org.jetel.graph.Node.run(Node.java:414)
         at java.lang.Thread.run(Thread.java:619)
    WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
    WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
    ERROR [WatchDog] - Graph execution finished with error
    ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
    ERROR [WatchDog] - Node RUN_GRAPH1 error details:
    org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
         at org.jetel.component.RunGraph.execute(RunGraph.java:324)
         at org.jetel.graph.Node.run(Node.java:414)
         at java.lang.Thread.run(Thread.java:619)
    INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
    INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
    INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
    ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
    INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
    INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
    INFO [WatchDog] - 0 ERROR 2 20132
    INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
    WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
    ./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
    INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
    INFO [main] - Freeing graph resources.
    ERROR [main] - Execution of graph failed !

    It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
    #echo $CLOVER_LIB/*
    for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
         LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
    done;
    #for i in `ls $CLOVER_LIB/*.jar`; do
    #echo $i
    #done;
    You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
    HTH,
    Dan
    http://branchbird.com

  • Distribution Cycle KSV5 Resulting in error when deselected the test run chk

    Hi Experts,
    Please help me out
    iam getting an error while running a Distribution Cycle KSV5 Resulting in error when deselected the test run chk box.
    When run the same in the test run, there isn't any error log. but when i deselect the same & run iam getting an error like
    First Message:
    Balance per segment 9999 is not zero
    Message no. FAGL_COFI025
    Diagnosis
    Balance per segment 9999 is not zero.
    The balance on segment 9999 is 50.00 (transaction currency), 0.00 (object currency), and 50.00 (controlling area currency).
    System Response
    With the standard settings, postings cannot be made to the document because the balance for segment and partner segment does not amount to zero. This may be due to a programming error, or this setting may have been made (perhaps unintentionally) in the BAdIs for determining the segment or partner segment.
    Procedure
    If there is a programming error, please inform your system administrator.
    If this behavior is intentional, you can deactivate error message FAGL_COFI 025 in Customizing or change the error message into a warning message or an information message.
    2nd Message
    Balance per segment 1000 is not zero
    Message no. FAGL_COFI025
    Diagnosis
    Balance per segment 1000 is not zero.
    The balance on segment 1000 is 50.00- (transaction currency), 0.00 (object currency), and 50.00- (controlling area currency).
    System Response
    With the standard settings, postings cannot be made to the document because the balance for segment and partner segment does not amount to zero. This may be due to a programming error, or this setting may have been made (perhaps unintentionally) in the BAdIs for determining the segment or partner segment.
    Procedure
    If there is a programming error, please inform your system administrator.
    If this behavior is intentional, you can deactivate error message FAGL_COFI 025 in Customizing or change the error message into a warning message or an information message.
    3rd Message
    No update performed due to an error
    Message no. GA719
    Diagnosis
    A serious error occurred during processing.
    System Response
    Processing is continued as far as possible, but results are not posted.
    Procedure
    This error is shown in the error list before this error message. Here you can find more information about this particular error.
    I would appreciate an early reply........!!!
    Thanks & Regards,
    Neela

    Hi,
    Check notes 764652 and 897086; it might be helpful.
    Regards,
    Eli

  • I get a runtime error when attempting to search the store in Itunes.  I unistalled and reloaded. How can I fix this?

    I just began getting a runtime error when attempting to search the iTunes store.
    I uninstalled and reinstalled but, it's still happening.
    How can I fix this so I can start to buy music again?

    I have the same error, but I think we will get no solution for this problem.
    You've get no answer here and the Apple support also doesn't send an answer how to solve the problem.
    BTW I have also Windows 7 and the newest version of iTunes 64-bit.
    Greetings Mike

  • I get a runtime error when I try to open itunes, any help?

    I get a runtime error when I try to open itunes, any help?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Error when running  the ant task

    Hi,
    I got an error when running the ant from jdeveloper .I was running the to build my J2EE module which is build in Java 1.4 . I have changed my java home to JDK 1.4 and then run the ant build i got the following error .The class and ejbc compilation is completing nicely but the error is happening at jar creation .Please help me . One more thing ,when i run the ant task from the command prompt ,it is working fine .
    AuditSearchVO), audit(com.ibsplc.iRes.audit.vo.BaseAuditVO)] >
    [java] java.io.IOException: CreateProcess: javac -nowarn -classpath D:\applns\bea\jdk142_08\jre\lib\rt.jar;D:\applns\bea\jdk142_08\jre\lib\i18n.jar;D:\applns\bea\jdk142_08\jre\lib\sunrsasign.jar;D:\applns\bea\jdk142_08\jre\lib\jsse.jar;D:\applns\bea\jdk142_08\jre\lib\jce.jar;D:\applns\bea\jdk142_08\jre\lib\charsets.jar;D:\applns\bea\jdk142_08\jre\classes;D:\Project\Development\aiRES1.7\classes;D:\Project\Development\aiRES1.7\ibase.jar;D:\applns\bea\weblogic81\server\lib\weblogic.jar;D:\applns\bea\weblogic81\server\lib\wlcipher.jar;D:\applns\bea\weblogic81\server\lib\jsafeFIPS.jar;D:\applns\bea\weblogic81\server\lib\webservices.jar;D:\applns\bea\weblogic81\server\lib\xmlx.jar;D:\applns\bea\weblogic81\server\lib\jconn2.jar;D:\applns\bea\weblogic81\server\lib\jConnect.jar;D:\applns\bea\weblogic81\server\lib\EccpressoAsn1.jar;D:\applns\bea\weblogic81\server\lib\EccpressoCore.jar;D:\applns\bea\weblogic81\server\lib\EccpressoJcae.jar;D:\applns\bea\weblogic81\server\lib\ant\ant.jar;D:\applns\bea\weblogic81\server\lib\ant\optional.jar;D:\applns”
    [java]      at java.lang.Win32Process.create(Native Method)
    [java]      at java.lang.Win32Process.<init>(Win32Process.java:66)
    [java]      at java.lang.Runtime.execInternal(Native Method)
    [java]      at java.lang.Runtime.exec(Runtime.java:566)
    [java]      at java.lang.Runtime.exec(Runtime.java:491)
    [java]      at java.lang.Runtime.exec(Runtime.java:457)
    [java]      at weblogic.utils.Executable.exec(Executable.java:227)
    [java]      at weblogic.utils.Executable.exec(Executable.java:156)
    [java]      at weblogic.utils.Executable.exec(Executable.java:142)
    [java]      at weblogic.utils.compiler.CompilerInvoker.execCompiler(CompilerInvoker.java:249)
    [java]      at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:428)
    [java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:328)
    [java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:336)
    [java]      at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:270)
    [java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
    [java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:397)
    [java]      at weblogic.ejbc20.runBody(ejbc20.java:517)
    [java]      at weblogic.utils.compiler.T

    Hi,
    I got an error when running the ant from jdeveloper .I was running the to build my J2EE module which is build in Java 1.4 . I have changed my java home to JDK 1.4 and then run the ant build i got the following error .The class and ejbc compilation is completing nicely but the error is happening at jar creation .Please help me . One more thing ,when i run the ant task from the command prompt ,it is working fine .
    AuditSearchVO), audit(com.ibsplc.iRes.audit.vo.BaseAuditVO)] >
    [java] java.io.IOException: CreateProcess: javac -nowarn -classpath D:\applns\bea\jdk142_08\jre\lib\rt.jar;D:\applns\bea\jdk142_08\jre\lib\i18n.jar;D:\applns\bea\jdk142_08\jre\lib\sunrsasign.jar;D:\applns\bea\jdk142_08\jre\lib\jsse.jar;D:\applns\bea\jdk142_08\jre\lib\jce.jar;D:\applns\bea\jdk142_08\jre\lib\charsets.jar;D:\applns\bea\jdk142_08\jre\classes;D:\Project\Development\aiRES1.7\classes;D:\Project\Development\aiRES1.7\ibase.jar;D:\applns\bea\weblogic81\server\lib\weblogic.jar;D:\applns\bea\weblogic81\server\lib\wlcipher.jar;D:\applns\bea\weblogic81\server\lib\jsafeFIPS.jar;D:\applns\bea\weblogic81\server\lib\webservices.jar;D:\applns\bea\weblogic81\server\lib\xmlx.jar;D:\applns\bea\weblogic81\server\lib\jconn2.jar;D:\applns\bea\weblogic81\server\lib\jConnect.jar;D:\applns\bea\weblogic81\server\lib\EccpressoAsn1.jar;D:\applns\bea\weblogic81\server\lib\EccpressoCore.jar;D:\applns\bea\weblogic81\server\lib\EccpressoJcae.jar;D:\applns\bea\weblogic81\server\lib\ant\ant.jar;D:\applns\bea\weblogic81\server\lib\ant\optional.jar;D:\applns”
    [java]      at java.lang.Win32Process.create(Native Method)
    [java]      at java.lang.Win32Process.<init>(Win32Process.java:66)
    [java]      at java.lang.Runtime.execInternal(Native Method)
    [java]      at java.lang.Runtime.exec(Runtime.java:566)
    [java]      at java.lang.Runtime.exec(Runtime.java:491)
    [java]      at java.lang.Runtime.exec(Runtime.java:457)
    [java]      at weblogic.utils.Executable.exec(Executable.java:227)
    [java]      at weblogic.utils.Executable.exec(Executable.java:156)
    [java]      at weblogic.utils.Executable.exec(Executable.java:142)
    [java]      at weblogic.utils.compiler.CompilerInvoker.execCompiler(CompilerInvoker.java:249)
    [java]      at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:428)
    [java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:328)
    [java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:336)
    [java]      at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:270)
    [java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
    [java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:397)
    [java]      at weblogic.ejbc20.runBody(ejbc20.java:517)
    [java]      at weblogic.utils.compiler.T

  • I get a Runtime error when i try to search within the iTunes store

    Please help! When in the iTunes store, I get a runtime error every time I try to use the search feature. I get a dialog box stating that Windows is searching for a solution, but then iTunes shuts down completely.

    I have the same error, but I think we will get no solution for this problem.
    You've get no answer here and the Apple support also doesn't send an answer how to solve the problem.
    BTW I have also Windows 7 and the newest version of iTunes 64-bit.
    Greetings Mike

  • I get errors When running the example programs SampleMetadataDiscoverer10g

    I installed database is 10g release 2 on Windows XP,and AWM version is 102010A.
    When running the example programs SampleMetadataDiscoverer10g.java to get the OLAP metadata,I get the following errors:
    oracle.express.idl.util.OlapiException: java.sql.SQLException: ORA-37158: CLOB &#25110;&#21487;&#21464;&#25968;&#32452;&#36755;&#20837;&#21442;&#25968;&#38169;&#35823;: (&#24773;&#24418; 6)
    ORA-06512: &#22312; "SYS.GENSERVERINTERFACE", line 46
    ORA-06512: &#22312; line 1
    at oracle.express.idl.ExpressConnectionModule.ServerInterfaceStub.connect(ServerInterfaceStub.java:694)
    at oracle.express.olapi.data.full.ExpressDataProvider.connect(ExpressDataProvider.java:436)
    at oracle.express.olapi.data.full.ExpressDataProvider.initialize(ExpressDataProvider.java:282)
    at oracle.olapi.examples.chapter4.MyConnection10g.connectToDB(MyConnection10g.java:126)
    at oracle.olapi.examples.chapter4.SampleMetadataDiscoverer10g.initialize(SampleMetadataDiscoverer10g.java:57)
    at oracle.olapi.examples.BaseExample.execute(BaseExample.java:32)
    at oracle.olapi.examples.BaseExample.execute(BaseExample.java:46)
    at oracle.olapi.examples.chapter4.SampleMetadataDiscoverer10g.main(SampleMetadataDiscoverer10g.java:44)
    Closing JDBC connection.
    Closed the connection.
    please..can someone give me some advice? thanks!

    I got the same error while doing "dp.initialize()"
    I fixed this error by chang the the "olap_api.jar class12.jar" to "o4j.jar".
    But i can't explain that.
    Can anyone tell me why?
    By the way , the "olap_api.jar class12.jar" are copy from the %ORACLE_HOME%\10.2.0\db_1\olap\api\lib .

  • Getting portal runtime error when cancel button is pressed

    Dear team,
              When i am trying to reset password, in that screen when i press cancel, i am getting portal runtime error . Actually when i press that button it should come to the intial login screen but now it is coming to the initial login screen but getting runtime error and also the images on that login screen are not being displayed. All the images are displayed as cross marks. When i press change password, its working fine and its logging into the portal .
    Please provide me some solution.
    Regards,
    Dinesh.

    Dear Prashant,
    Sorry for my delay... please find the Error Log below.
    Full Message Text
    03:30_12/04/11_0465_8587550
    [EXCEPTION]
    com.sapportals.portal.prt.runtime.PortalRuntimeException: iView not found: portalapps.default
    at com.sapportals.portal.prt.deployment.DeploymentManager.getPropertyContentProvider(DeploymentManager.java:1937)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:222)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
    at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
    at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java:488)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:607)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:235)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:541)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176) 

  • Runtime error when running Authoware session in Vista

    Hi
    One of our users has reported to a error when running an
    authorware session in Vista:
    "I get the message when trying to open the session...
    It says:
    Authorware runtime does not work anymore.."
    Any ideas why this user is getting this problem?
    thanks
    Jon

    I can assure of one thing.. there is no such message anywhere
    in the
    product. You should get the actual message from your user and
    let us know
    what it is.
    Mike
    ====================
    Mike Baker
    Adobe Community Expert
    mike-baker at cox dot net
    "webacity" <[email protected]> wrote in
    message
    news:gfuorj$ebe$[email protected]..
    > Hi
    >
    > One of our users has reported to a error when running an
    authorware
    > session in
    > Vista:
    >
    > "I get the message when trying to open the session...
    >
    > It says:
    >
    > Authorware runtime does not work anymore.."
    >
    > Any ideas why this user is getting this problem?
    >
    > thanks
    > Jon
    >

  • Runtime Error, when running midlet.

    I can build the midlet without problems. This error occurs when the emultator starts the midlet. I can se the phone for a sec or two then i turns of and the error occurs in the console.
    I am using, j2me, eclipse, eclipseme, cldc1.1,mipd2.2.
    Running with storage root DefaultColorPhone
    java.lang.ClassNotFoundException
         at com.sun.midp.midlet.MIDletState.createMIDlet(+14)
         at com.sun.midp.midlet.Scheduler.schedule(+52)
         at com.sun.midp.main.Main.runLocalClass(+28)
         at com.sun.midp.main.Main.main(+116)
    Execution completed.
    705709 bytecodes executed
    5 thread switches
    739 classes in the system (including system classes)
    3582 dynamic objects allocated (97424 bytes)
    1 garbage collections (0 bytes collected)
    I am not sure about whats wrong. Isn't is supposed to be a class name the exception. like this.
    java.lang.ClassNotFoundException. xxxxxxxxxxxxx
    So i know in what class the exception occurs.??
    Anyhow, anyone that has any clue what could be wrong?
    Seems to be an error with the emulator not with the build priocess.
    I get the same error while triyng to run it with ktoolbar.
    thnx

    I can assure of one thing.. there is no such message anywhere
    in the
    product. You should get the actual message from your user and
    let us know
    what it is.
    Mike
    ====================
    Mike Baker
    Adobe Community Expert
    mike-baker at cox dot net
    "webacity" <[email protected]> wrote in
    message
    news:gfuorj$ebe$[email protected]..
    > Hi
    >
    > One of our users has reported to a error when running an
    authorware
    > session in
    > Vista:
    >
    > "I get the message when trying to open the session...
    >
    > It says:
    >
    > Authorware runtime does not work anymore.."
    >
    > Any ideas why this user is getting this problem?
    >
    > thanks
    > Jon
    >

Maybe you are looking for