Getting Audio to stop when swiping within an article?

I have an audio clip that a user can play on a particular page within an article. I'd like the audio to stop playing if the user decides to continue on in the article (swiping down, not left or right). Is this possible? Selecting "stop audio on page turn" only stops it when swiping left or right to the next or previous article.
Has anyone found a fix for this?
Thanks,
Christopher

if you autokplay a transparent & silent audio of only one secnd any other
audio/video stops because the iPad can only play one media at a time.
—Johannes
(mobil gesendet)

Similar Messages

Get audio to stop when user rolls over / clicks on sidelet

So ive recorded some software simulation, then i want to add
in a sidelet, and when the user rolls over the sidelet i want the
slide and audio to pause until they close or roll off -- can you do
that. My question is a 2 parter, as in,i would like to know for
both, a rollover and a click as i may use both tecniques on
different slides

Hi Paco,
Here is an AS3 version for Captivate 4:
http://www.cpguru.com/demonstrations/as3(cp4)MuteSounds.zip
I don't have CP4 installed on this machine anymore so I haven't been able to test if it works or not.
Good luck ;o)
/Michael
Visit my Captivate blog with tips & tricks, tutorials and Widgets.

Can I get audio through iPhone when using apple tv?

Can I get audio through iPhone when using apple tv?

What do you mean exactly? Are you wanting to output the audio to your iPhone while say watching a video on your Apple TV? If so, I'm afraid it's not possible. However, you should post this in the Apple TV forums for a better confirmation on then. There are some prettty knowledgable people who hang out there.
https://discussions.apple.com/community/appletv
B-rock

Mac mini bluetooth audio connection stops when paused

Hello!
I have a Mac mini late 2012, i5 Version, 2.5Ghz as my home Desktop. The OS is 10.9.5 Mavericks.
It's connected to a Logilink Bluetooth to 30 pin dock connector adapter, standing on an Apple Dock, connected to my Home Stereo. My Problem is, that everytime i pause the audio on my mini, the bluetooth connection just stops, and if i press play again, it plays through my internal speaker again.
I temporarily fixed this by playing a 10hour version of a song with 0 volume on itunes, but this shouldn't be a long-time solution.
I tried it with another bluetooth adapter, another dock, another home stereo. The issue probably is Mavericks, with it's awesome bluetooth settings, connect or don't connect.
Is there any program out there which sets the connection to permanent? Or is there an other solution?
Thank you very much in advance!
(Sorry for poor english. If you don't understand something, i could explain it in german!)

Ah, no joy, as suspected...I'm using Boot Camp version 4 and all i got was a flash drive full of boot camp version 3.1 - 3.3? A few firmware upgrades that says it isn't compatible...
IS THERE ANYONE AT APPLE THAT CAN HELP!!!
Jesus! I bought this a week ago and I can't even get audio! If this is the kind of service coming from Apple then I don't know...

Re: Not getting audio from TV when connecting MacBook Pro with all correct cables.

How do I get audio from the TV when connecting MacBook Pro with all the correct cables?

Hi Lynn,
If you're positive you have the correct cables, and positive they work, they must be plugged into an input on the TV made for that purpose, then that input must be selected on the TV's menu.

Audio portion stops when playing movie

The audio portion of my movie stops playing. I have remade the movie and the disc several times. There is no indication, prior to watching it on TV, that there is a problem. The burn is successful and when I open the file the movie plays fine on the computer. I don't know if the way I have made the movie is contributing to the problem. Obviously, I'm new to this so please bear with me if I'm giving too much information. I have a total of four clips (movies?) that I bring into the idvd menu. Three of the clips are based on months throughout the year. The fourth clip is a combination of those three so that I have an undivided movie of the whole year. I guess I'm questioning whether the reuse of the pictures and music make a difference even though they are independent clips.
I'm using imovie and idvd 11.
Do you have any suggestions as to why the music quits and/or how I can solve this most frustrating and time-consuming problem? Thank you.

Hi
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

Audio stream stops when I switch to another tab in Safari

I've got this radio station website which links to a live stream so you can hear the station online. It worked fine a couple of weeks ago, on my Powerbook G4 running 10.4.9. Then my Powerbook died.
Enter my new MacBook Pro, still running 10.4.9. I try to listen to the same station, but everytime I start the stream, then switch to another tab to browse the internet, the audio stream stops.
BTW, the audio stream behaves properly when I use Firefox. Is there a reason why Safari can't keep on playing the audio stream when it's not in the active tab? Or have I got a bad configuration?
Many thanks, as always.

Nah, forget it; I just remembered what really used to happen (which still happens):
I used to open a new Safari window (not a new tab), open the radio stream in that new window, then switch to my previous Safari window with all my tabs. Then it works.
For some reason, I don't have to do this (i.e. open two different windows as opposed to two tabs) in Firefox.
I really like and prefer Safari to most browsers, but I have to admit, it's rather flaky in a number of ways. This is one of them.

Audio playback stopping when adjust level on timeline

hello,
I am trying to adjust basic audio levels during playback from the timeline. I have been able to do this before, but now when I move the purple bar up or down, the audio level does not change, it plays for another second or two then stops. Has anyone else been experiencing this? It never did this before. Thought I did upgrade to the latest OS, might that be the problem? Thanks for any help.

the problem actually comes in when I am using the Euphonix MC Control interface. It is a digital audio console that interfaces with FCP to adjust audio live with real faders.
It seems that even when I am not use the console though, the audio levels cannot be adjusted during playback. Even using the audio mixing window, I have had no luck.
On my laptop though it works. any thoughts?

In my HP Pavilion G6 audio autiomatically stopped when i insert my internet stick in usb port

when i plugged my usb internet data card, my hp pav. g6 sound stop working..if i watch a video & plugged data card the video will keep running but without sound

Hi,
Can you post back with the full Model No. and Product No. of your g6 series notebook - see Here for a guide on locating this information.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Can only get audio when trying to AirPlay from Dish app

Since updating to IOS 6 I only get audio when air playing from my Dish Network app on my iPad. I can get audio and video when mirroring; however the quality is horrible and it doesn't fill my screen. I was able to get audio and video both before updating my iPad and Apple TV. The recent updates have been a disaster!!
Apple TV and AirPlay were great products before. I thought updates are supposed to make Apple products better....not worse. Please help if there is a solution

Usually these types of limitations are added by the app developer, especially with media apps like these. However I would first try Resetting the devices. I found the best way to reset the iPad is to close all apps in the recently used app list. Double tap the Home button to reveal the list at the bottom then tap and hold one icon till they wiggle and display a minus button. Tap the to close all apps them press the Home button to get back to the home screen. Hold the Sleep button till "Slide to power off" appears. Once it has shut down completely press the Sleep button till you see the Apple icon.
The procedure is similar to resarting your computer when it starts acting flaky. iPads are just a hand head computer and rarely gets shut down or reset so it would be similar to running your computer for months at a time without shutting it down.

Can't get Audio to play through when importing using iMovie '09

Anyone know how to get audio to work when importing DV footage into iMovie '09.
It used to work fine in iMovie HD. Any ideas??
Yours sincerely,
Anthony
Irish MacUser & MacAddict

I've just spent a while trying to figure this out ...
I used this feature (monitoring audio on import) all the time in previous versions of iMovie ...
Kind of essential I think ...
Now we have a new 'feature' in iMovie where you can't monitor audio during import.
Wouldn't it be nice if Apple documented this somewhere (maybe on iMovie Help ...).
I understand about hi-speed import from other (non DV) formats ...
So why not just let the user hit the 'mute' button if they don't want to listen to audio on import ?
Pretty simple - rather than having this somewhat arbitrary rule imposed on iMovie users ?
The only way to monitor audio during import is to plug headphones into the camera itself.
Which means we are wearing a thing with a wire attached - making the BT headset capability of the Mac somewhat redundant.
Oh well ... one step forward, one step back.

I am having trouble getting audio from a DVD.

Initially when I insert the DVD i get audio playing. Then, I pair my bluetooth headphones, they say they are connected but I get no audio from the laptop speakers or from my headphones. I disconnect the headphones and still get no audio from the laptop. I have ejected the DVD and tried to start over and still have no audio. I would like to have audio from my bluetooth headphones because this is a workout DVD. Oh, I can get audio from itunes when my headphones are connected.
Thanks in advance!

There are differences among MacBook models in that most cannot use audio over HDMI, and according to at least one answered reply here in ASC discussions, you'd need another cable or adapter for audio if you don't have a 2010 MacBook...
Here's a similar discussion with ideas, from a few years ago:
•I'm trying to hook my MacBook to my TV:
https://discussions.apple.com/message/16089168#16089168
You could check some of the similar discussion links to the right
of your posted question (this column) to see if other ideas are
offered; but this one seems to cover a general circumstance &
it may be workable if you get the correct parts.
Good luck & happy computing!

Audio wont stop

I created an org chart. When you click on each of the boxes in the org chart a callout pops up with audio describing the position. If you switch between each box the audio stops on the previous and starts on the current. The audio doesn't stop however if I move to the next slide. How do I fix that? I've tried stop triggered audio, pause etc. Nothing seems to work

Normally audio should stop when object is hidden. How do you move to the next slide, is it just because the playhead reaches the end of the slide or do you use a Next button?
If it is the first scenario (playhead reaches end of slide), create a standard advanced action that hides the object (or the group of objects, if you are not sure which one will be visible) and trigger that action On Exit. The hide action is not available for On Exit as simple action.
If you use a Next button, trigger that Hide command together with the Go to Next Slide command by creating another advanced action. If you are on CP8, I recommend creating shared actions, you can reuse them more easily

My audio reverberates, how do i get it to stop?

I have Windows 7 64-bit on a dv7-6187cl and my audio is reverberating al of the time. How do I get it to stop?

Hi JulieY,
Would you please elaborate on your issue, and how it sounds. I know what reverb sounds like when mixed in music, but I have a feeling that isn't what you are talking about.
Also, please include your product number.
Thanks
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How do I get the beeping to stop when playing in the Timeline?

This is probably one of the most elementary questions, but for some reason I can't seem to figure out - or find in the documentation - how to get FCE to stop beeping when I play something assembled in the timeline.
In other programs I've tried (Adobe Premiere Pro for example), you hit the space bar and it plays - with audio in-tact and in sync. Here, I hear a steady beep.
Doing some research, I found that this might have something to do with unrendered audio; the problem is, every time I try to render audio with this program, as soon as it finishes it locks up BEFORE the audio file is written to the disc. And I've let it sit for over five hours - nothing.
Any help anyone could provide would be greatly appreciated.
Quad 2.5 GHz PowerPC G5 Mac OS X (10.4.7)

Thanks for the reply Max. The original video came from a DVD which I ripped via HandBrake. I then, after three days of googling and finally getting an answer from some one on this forum, re-exported the resulting MPEG4 into a DV format file through MPEG Streamclip.
After reading that it needs to be in 48k format, I re-exported from MPEG Streamclip and this time, hit the option for "Resample to 48k". I brought it back into FCE and put it on the timeline, but still needed to render.
This time, I watched the folder the render sequence file went into. As soon as it finished, the render file DISSAPEARED. I'm assuming it was moved or deleted but I don't know where it could have been moved to.
Trying to use anything in the FCE interface now results in the application locking up. I can't exit it or use it at all - it's force quit or let it sit (which as I said, I've let it sit for 5+ hours earlier).
Prior to starting that render, I set the permissions on the folder ~/Documents/Final Cut Express Documents/ to read and write using Finder and applied it recursively (to all sub-folders). So there aren't any permissions problems.
Honestly, I want my money back for this program. This is unacceptable. Any Apple technicians want to give a crack at this?

Getting Audio to stop when swiping within an article?

Similar Messages

Maybe you are looking for