Getting BAM Error: BAM-06008: The XML payload is invalid; extra contents we

Hi All,
Version: 11.1.1.4
We are getting the BAM Error: "BAM-06008: The XML payload is invalid; extra contents were found" after I added a another field to a BAM Object. I can see the new field in BAM and I can also see it when I pull up and map to a BAM adapter in my SOA composite. However, when I have the process send a payload with the newly added field it fails with the above error. However, if I add a new data object in BAM with the field it works fine. What would be causing BAM to think that the newly added field should be in payload?
Any suggestions would be greatly appreciated.
--S                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

If the layout of the data object changes then you need to restart BAM server for changes to take effect. Also make sure, your mapper file isn't adding extra elements than expected.
Thanks
Jahangir Pasha

Similar Messages

  • BAM-06008: The XML payload is invalid; extra contents were found.

    Hi All,
    Version:11.1.1.6
    We are getting the BAM Error: "BAM-06008: The XML payload is invalid; extra contents were found" after I added a another field to a BAM Object.I have added that extra field to corresponding data objects .wsdl file as well as in the .xsd. I can see the new field in the BAM DO. However, when I used to send a payload with the newly added field it fails with the above error. However, if I add a new data object in BAM with the field it works fine.
    Why  am  I getting this error?
    Thanks,
    Rahul

    I have followed the following steps:-
    1.Make entry of new field in ".wsdl" file which is in the BAM folder.
    2.Make entry of new filed in ".xsd" file.
    3.Make appropriate mappings in ".xsl" file corresponding to the sensor's action.
    Initially i was only restarting BAM and was facing above mentioned error. After restarting SOA as well as BAM server, it started working.

  • When I Open the Acrobat XI I just purchased as download from Academic Superstore I get and error message that the serial number is invalid.

    Is there something special I need to do when installing adobe Acrobat XI on my mac.  I am getting an error that the serial number is wrong but I am entering the serial number provided be indent-e.com?  anyone have any ideas?

    Hi memegaines,
    Are you still facing this issue?
    Send me the serial number you are using via private message option: https://forums.adobe.com/thread/1184148
    Also attach the screen shot of the error message, you must remove serial number from screen shot while you reply.
    Regards,
    Ajlan Huda.

  • How to get the XML Payload of called process from calling process?

    I have two SOA processes say process A and process B.
    Process B is called by process A.In process A I, am using the getRequestMessage() method in Java code to get the XML payload of process A.
    But i want the XML payload of process B in process A.How can i achieve it?

    Doug,
              I used the property loader method but I could not load the limits of any sub sequence call calling an external sequence file.
    I took the FlowRate_test.seq example from the NI Example folder "C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.2.1\Examples\PropertyLoader\LoadingLimits\LimitsFromExcelFile\UsingCVI". I created a sequence called PumpTest.seq in the same folder path. I then moved the Pump Test step from the FlowRate_test.seq to the PumpTest.seq. Now created a sequence call in the FlowRate_test.seq and called the PumpTest.Seq as the module path. When I execute the FlowRate_test.seq , I get the error as shown below:
    Attached is the Flowrate_Test.seq and the PumpTest.seq which should be there in the folder path "C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.2.1\Examples\PropertyLoader\LoadingLimits\LimitsFromExcelFile\UsingCVI".
    Let me know whether I am doing something wrong in this method. 
    My idea is to alter the runstate variable High and Low of Pump Test in the PumpTest.seq and then run the Flowrate_Test.seq.
    Attachments:
    PumpTest.seq ‏6 KB
    FlowRate_test.seq ‏11 KB

  • "Error while parsing SOAP XML payload: no element found" received when invoking Web Service

    Running PB 12.1 Build 7000.  Using Easysoap.  Error ""Error while parsing SOAP XML payload: no element found" received when invoking Web Service".  This error does not appear to be coming from the application code.  Noticed that there were some erroneous characters showing up within the header portion of the XML ("&Quot;").  Not sure where these are coming from.  When I do a find within the PB code for """" it gets located within two objects, whereas they both reference a "temp_xml_letter".  Not sure where or what temp_xml_letter resides???   The developer of this is no longer with us and my exposure to WSDL and Web Services is rather limited.  Need to get this resolved...please.
    This is the result of the search.  Notice the extraneous characters ("""):
    dar1main.pbl(d_as400_mq_xml)
    darlettr.pbl(d_email_xml)
    ---------- Search: Searching Target darwin for 'temp_xml'    (9:52:41 AM)
    ---------- 2 Matches Found On "temp_xml":
    dar1main.pbl(d_as400_mq_xml).d_as400_mq_xml:  export.xml(usetemplate="temp_xml_letter" headgroups="1" includewhitespace="0" metadatatype=0 savemetadata=0  template=(comment="" encoding="UTF-8" name="temp_xml_letter" xml="<?xml version=~"1.0~" encoding=~"UTF-16LE~" standalone=~"yes~"?><EmailServiceTransaction xmlns=~"http://xml.xxnamespace.com/Utility/Email/EmailService" ~" xmlns:imc=~"http://xml.xxnamespace.com/IMC~" xmlns:xsi=~"http://www.w3.org/2001/XMLSchema-instance~" xmlns:root=~"http://xml.xxnamespace.com/RootTypes~" xmlns:email=~"http://xml.xxnamespace.com/Utility/Email~" xsi:schemaLocation=~"http://xml.xxnamespace.com/Utility/Email/EmailService http://dev.xxnamespace.com/Utility/Email/EmailService/V10-TRX-EmailService.xsd~"><EmailServiceInformation><EmailServiceDetail __pbband=~"detail~"><ApplicationIdentifier> applicationidentifier </ApplicationIdentifier><AddresseeInformation><AddresseeDetail><Number> number </Number></AddresseeDetail></AddresseeInformation><EmailMessageInformation><Ema
    darlettr.pbl(d_email_xml).d_email_xml:  export.xml(usetemplate="temp_xml_letter" headgroups="1" includewhitespace="0" metadatatype=0 savemetadata=0  template=(comment="" encoding="UTF-8" name="temp_xml_letter" xml="<?xml version=~"1.0~" encoding=~"UTF-16LE~" standalone=~"yes~"?><EmailServiceTransaction xmlns=~"http://xml.xxnamespace.com/Utility/Email/EmailService" ~" xmlns:imc=~"http://xml.xxnamespace.com/IMC~" xmlns:xsi=~"http://www.w3.org/2001/XMLSchema-instance~" xmlns:root=~"http://xml.xxnamespace.com/RootTypes~" xmlns:email=~"http://xml.xxnamespace.com/Utility/Email~" xsi:schemaLocation=~"http://xml.xxnamespace.com/Utility/Email/EmailService http://dev.xxnamespace.com/Utility/Email/EmailService/V10-TRX-EmailService.xsd~"><EmailServiceInformation><EmailServiceDetail __pbband=~"detail~"><ApplicationIdentifier> applicationidentifier </ApplicationIdentifier><AddresseeInformation><AddresseeDetail><Number> imcnumber </Number></AddresseeDetail></AddresseeInformation><EmailMessageInformation><Ema
    ---------- Done 2 Matches Found On "temp_xml":
    ---------- Finished Searching Target darwin for 'temp_xml'    (9:52:41 AM)

    Maybe "extraneous" is an incorrect term.  Apparantly, based upon the writeup within Wiki, the parser I am using does not interpret the "&quot;"?  How do I find which parser is being utilized and how to control it?
    <<<
    If the document is read by an XML parser that does not or cannot read external entities, then only the five built-in XML character entities (see above) can safely be used, although other entities may be used if they are declared in the internal DTD subset.
    If the document is read by an XML parser that does read external entities, then the five built-in XML character entities can safely be used. The other 248 HTML character entities can be used as long as the XHTML DTD is accessible to the parser at the time the document is read. Other entities may also be used if they are declared in the internal DTD subset.
    >>>

  • Print a custom Error message in the XML bursting program's log file...

    Hi,
    I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
    Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
    Two things i want to know..
    1- Whether is it possible to write into the xml bursting programs log file
    2- If yes, then how..
    note: it ll be greatly appreciated if the answer is elaborated.
    thanks,
    Ragul

    Hi,
    I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
    Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
    Two things i want to know..
    1- Whether is it possible to write into the xml bursting programs log file
    2- If yes, then how..
    note: it ll be greatly appreciated if the answer is elaborated.
    thanks,
    Ragul

  • In PI how do I convert the XML payload (input) to a text file and send out

    I am extracting data from SAP and sending thru XI / PI to a file (non-sap system).
    On the receiving end, I need the file to be a text file, with one row for each "FTZ_Row concatenated_data" tag in the input.  It needs to be just a plain text file with no XML tags.
    Currently the file gets one record which matches exactly to the XML payload below.
    I want it to create a file that looks like this :
               CONCATENATED DATA 1
               CONCATENATED DATA 2
                012345678912345678MAKTX-TEST LB 123123123123 01/02/2009 Z001WCHA9876543210.12
    here is the payload going thru XI
      <?xml version="1.0" encoding="utf-8" ?>
    - <n0:FTZ_Concatenated_Row xmlns:n0="http://intel.com/xi/INTEL_PROCUREMENT/ForeignTradeZone" xmlns:prx="urn:sap.com:proxy:FI0:/1SAI/TAS0C0412CDBC3E782D0219:700:2008/06/25">
      <FTZ_Row concatenated_data="CONCATENATED DATA 1" />
      <FTZ_Row concatenated_data="CONCATENATED DATA 2" />
      <FTZ_Row concatenated_data="012345678912345678MAKTX-TEST LB 123123123123 01/02/2009 Z001WCHA9876543210.12" />
      </n0:FTZ_Concatenated_Row>
    thanks
    jay

    thanks for the input but I am still having issues - I get an empty file when I use the content conversion option.
    My payload coming into XI is :
            <?xml version="1.0" encoding="utf-8" ?>
    - <n0:FTZ_Concatenated_Row xmlns:n0="http://intel.com/xi/INTEL_PROCUREMENT/ForeignTradeZone" xmlns:prx="urn:sap.com:proxy:FI0:/1SAI/TAS0C0412CDBC3E782D0219:700:2008/06/25">
    <FTZ_Row concatenated_data="CONCATENATED DATA 1" />
    <FTZ_Row concatenated_data="CONCATENATED DATA 2" />
    <FTZ_Row concatenated_data="012345678912345678MAKTX-TEST LB 123123123123 01/02/2009 Z001WCHA9876543210.12" />
    </n0:FTZ_Concatenated_Row>
    Here is the layout of my data type - I am using the same for input & output
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://intel.com/xi/INTEL_PROCUREMENT/ForeignTradeZone" targetNamespace="http://intel.com/xi/INTEL_PROCUREMENT/ForeignTradeZone">
       <xsd:complexType name="FTZ_Concatenated_Row">
          <xsd:sequence>
             <xsd:element name="FTZ_Row" maxOccurs="unbounded">
                <xsd:complexType>
                   <xsd:attribute name="concatenated_data" type="xsd:string" />
                </xsd:complexType>
             </xsd:element>
          </xsd:sequence>
       </xsd:complexType>
    </xsd:schema>
    I mapped these items :  FTZ_Concatenated_Row & FTZ_Row & concatenated_data
    I set up my content convesion with :
      recordset structure   FTZ_Row
    FTZ_Row.fieldSeparator     #
    FTZ_Row.endSeparator     'nl'
    I am not sure why the following row looks like this ??
        <FTZ_Row concatenated_data="CONCATENATED DATA 1" />
    I thought FTZ_Row would be one tag and "concatenated_data" would be another one.
    any help would be appreciated.
    I have read many entries/blogs/etc in SDN but and tried many different setups, but nothing is working.
    thanks

  • Problem opening mail attachments...were opening seamlessly on os 7.0...get an error   Filename Office open XML document/presentation File size   Does anyone have a solution? Please help.

    problem opening mail attachments...were opening seamlessly on os 7.0...get an error
    Filename
    Office open XML document/presentation
    File size
    Does anyone have a solution? Please help.

    Hi Charlotte,
    You don't say what your version of Windows you have. Assuming XP, go to Start | Run, type DXDIAG and click OK. Click the Sound tab and run the tests to eliminate a hardware problem first of all. If you don't hear anything, check your cables first of all. Also make sure "Mute" isn't checkmarked in your sound setup. You'll find that in Windows Control Panel.
    Which browser do you use? If you have Firefox 4, sign up to the HTML5 trial @ http://www.youtube.com/html5
    HTML5 is the latest video standard and doesn't require Flash player. Google is in the process of converting all its files to work with the new format. It may solve you problem. If you don't have Firefox 4, you can get it from here: http://www.mozilla.com/en-US/firefox/fx/
    IE8 doesn't support HTML5.
    To clean out your temp files, go to Start | Run, type: CLEANMGR and click OK. Click OK again to start the utility. Tick all the boxes except "Compress old files" because the latter takes too long, and then click OK. You can run this utility any time you wish by the way.
    The above steps will hopefully fix your problem. If not, post here again please.

  • I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

    I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

    Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
    To reset the SMC
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Getting an error while adding the user in Sharepoint foundation 2010 environment.

    Hi,
    I am having full control access to SharePoint site. Then i tried add user for that site.
    But i am getting following error while adding the user to the site.
    An unexpected error has occurred.
    Troubleshoot issues with microsoft SharePoint Foundation.
    Correlation ID:3035B777-1B7C-4463-B35E-06657B72C2E4
    Can you please help me anyone on this.
    Thanks,
    Ashok

    This could be any one of a number of things.  You need to lookup the Correlation ID in the ULS logs on the SharePoint server.  That should provide the additional information necessary to diagnose and solve the problem.  Here's a blog post
    on how to find the error.
    http://habaneroconsulting.com/Blog/Posts/Get_the_Real_SharePoint_Error_using_the_ULS_Logs.aspx#.UvEuffldWik 
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Help

    I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!

    You need to be very careful which project you open in which version.
    For 2014 make sure its on 2014.1 build 81.

  • I am unable to open a project that I have worked on and saved.  I get an error message that the file is damaged and cannot be opened.

    I am unable to open a project that I have worked on and saved.  I get an error message that the file is damaged and cannot be opened.

    Leslie Tanaka
    Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
    Let us go back over that Adobe document regarding troubleshooting damaged projects.
    3. Delete the Application Preferences
    Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
    7. Test to see if individual media files are causing the problem.
    That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
    I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
    I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
    Please review and consider.
    Thank you.
    ATR

  • HT1926 I have just updated itunes on my pc (widows XP) to the latest version. When I try to open it i get an error message saying the application failed to start because MSVCR80.dll could not be found. Not sure how to resolve this. Have tried to reinstall

    I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?

    try removing all itunes and all other apple program
    follow this link for more info. http://support.apple.com/kb/HT1923
    reboot ur window after uninstalling
    after that download the latest itunes setup and install.

  • HT4993 i am trying to install msnbc app from the app store and keep getting an error message.  The app will not install.  What can i do?

    i am trying to install msnbc app from the app store and keep getting an error message.  The app will not install.  What can i do?

    This is asked and answered many times each day.  The forum search bar is on the right side of this page.
    Disable your firewall/security software and try again.

  • I get an error message saying "The iTunes Library.itl file cannot be found or created" when I try to open iTunes on my computer and the program fails to open.   How can I fix this?

    When I try ot open iTunes on my computer I get an error message stating "The iTunes Library.itl file cannot be found or created" and the program fails to open.  How can I fix this issue?

    Hi pgarard1,
    If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
    iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
    http://support.apple.com/kb/TS2363
    Regards,
    - Brenden

Maybe you are looking for