Getting clean mesh overlay on 3d graph

First let me say that the new 3d stuff is much better than the old cw graph stuff.
One problem I'm having however is the mesh overlay on the 3d graph
control when I turn on overlay lines. When I use the 3d surface that
comes with the ni helper vi, it looks fine, as it should. However when I
use the native 3d graph and turn on overlay lines, the lines are
fragmented and appear to be rendered at the exact same location as the
plot itself as opposed to on the surface of the plot. The picture and vi
below demonstrate what I'm talking about.
In the picture, on the left is ni's xcontrol with helper vi. However, I
only want the rendering screen and want to make my own custom color bar.
To the right is the same plot but the rendering looks different - the
overlay lines do not render smoothly like in the first plot. Is there
any way to fix this?
Thanks
Attachments:
3d graph.PNG ‏152 KB
3d graph.vi ‏54 KB

Or, you could make use of the first control.
1) hide the ramp and palette in Shortcut->Visible Items
2) open "<LVROOT>\vi.lib\Math Plots\3D Math Plots\3D Surface\3D Surface XCtrl\Facade.vi", make the frame transparent by using the brush in Tools Palette(View). And save.
Then you would have the control look like this(ignore the marching ants). This is the only way to customized these xcontrols theme.

Similar Messages

  • Getting clean vocals from an xlr mic using macmice micplug

    I have a 1 ghz powerbook using FCP5 and garageband 2. I have a sennheiser ME66 mini shotgun mic. I wanted to try recording audio from my Sennheiser mic so I bought a macmice micplug (xlr to usb)
    I've tried recording audio into FCP5 and garageband, but I get a lot of noise behind the voice track.
    Has anyone used the micplug with success, getting clean professional quality audio?

    Something like this XLRmic-to-USB preamp should do the job OK.
    http://www.amazon.com/MXL-MICMATEC-Preamp-Condenser-Microphones/dp/B000VZ8WC2
    However, the ME66 is not really a voice mic - it's a directional shotgun, with too much gain for close-miked voice (but you probably know that!)

  • User temp tables not getting cleaned out from tempdb?

    Im seeing what looks like temp tables that are hanging around in tempdb and not getting cleaned out.
    This is SQL 2008 
    SELECT * FROM tempdb.sys.objects so WHERE name LIKE('#%') AND DATEDIFF(hour,so.create_date,GETDATE()) > 12
    Im seeing about 50 or so objects that get returned and they are user_table and some of them have create dates of several days in the past.  Now I know users do not run processes that take that long, so why are these objects still hanging around?
    TempDB gets reset after a server restart, but other than that, how long are these things going to hang around?

    A local temporary table scope exists only for the duration of a user session or the procedure that created the temporary table. When the user logs off or the procedure that created the table completes, the local temporary table is lost. 
    You can check the below blog for more information
    http://sqlblog.com/blogs/paul_white/archive/2010/08/14/viewing-another-session-s-temporary-table.aspx
    --Prashanth

  • Transaction logs not getting cleaned up

    I'm using Directory Server v5.2 on Windows 2000 and we encountered a situation over the weekend where our server ran out of disk space (5GB Drive w/ 1.3 DB free at the start of the test). When I looked in the slapd-mydir\db directory, it was filled w/ over 900 log.00000xxx files totalling 1.3GB in size. (About 10K each).
    These are the transaction logs I believe and I do not see why they are not getting cleaned up.
    Restarting slapd did not fix it. And deleting those files causes the directory server to complain vigorously about missing log files.
    Every other server in our lab I checked did not have this problem - only this one. Any thoughts on how this can happen and what one can do about it? We are running w/ default attributes and settings for transaction logging.
    We are now having to completely re-install this server.

    Hi, I�d like to know how as you solved this problem.
    HC

  • [svn] 3347: -remove the javascript directory since it is getting cleaned and recreated during the build process .

    Revision: 3347
    Author: [email protected]
    Date: 2008-09-25 06:27:28 -0700 (Thu, 25 Sep 2008)
    Log Message:
    -remove the javascript directory since it is getting cleaned and recreated during the build process.
    -this should make SVN happy and get the builds working again
    Removed Paths:
    flex/sdk/trunk/frameworks/javascript/FABridge/samples/srcview/source/fabridge/javascript/

    - Where? That depends upon what you what. But, going by the letter of what you asked, you shouldn't deploy any applications or packages if you want them on your newly images systems, you should make them a part of the TS using Install Software and Install
    Application tasks.
    - How many times? You should only need one although depending upon what you are deploying and if you are using offline updates, some folks add more. I typically use two one right after the Setup Windows and ConfigMgr task (just like the task sequence wizard
    builds for you) to update the OS and "things" in the image and one at the end to catch additional updates for apps and components added during the TS. Note that you also have to initiate an update scan cycle for additional install update tasks to work. Do
    this by adding a run-command line task before the second Install Updates task with the proper WMIC incantation.
    - Offline Updates only injects CBS updates into the image which are typically just core OS updates. You should also update your image though to include non-CBS updates. Using a build and catpure task sequence makes this easy.
    Jason | http://blog.configmgrftw.com

  • How do I get  appointments to overlay in iCal?

    How do I get  appointments to overlay in iCal?

    Jane,
    What calendars do you have listed when you click on the "Calendars" button?

  • When trying to crop an image in Lightroom Develop I get a blue overlay screen and cannot see image

    When trying to crop an image in Lightroom Develop I get a blue overlay screen and cannot see image. I have uninstalled and reinstalled but same result. How can I get this reset to show selected image and crop handles?

    That has fixed it, all working fine now, thanks.

  • FRM-47026 Cannot get parameter error when using bi graph

    Hi,
    I have recently tried to use the BI Graph bean provided as a demo from Oracle.
    I have amended the cursors and put into our system but get an error on the master graph.
    When i mouse click on a column i recieve the error from forms :
    FRM-47026 Cannot get parameter GRAPH_INFO attributes from parameter List CUSTOM_ITEM_LST19: no such names parameter exists.
    Any ideas. i have not changed the code in this trigger only the procedure cursors to work within our system
    code in trigger:
                   eventValues := get_parameter_list(:system.custom_item_event_parameters);
                   get_parameter_attr(eventValues,'GRAPH_INFO',eventValueType, tempString);
                   set_custom_property('PJC.WAREHOUSEGRAPH',1,'HIDE_GRAPH','');
                   FORMSGRAPHSAMPLE.clearData('PJC.DETAILGRAPH');
                   FORMSGRAPHSAMPLE.populateDetailGraphData('PJC.DETAILGRAPH',tempString,',');
    thanks

    Hi,
    Did you ever get this issue resolved?
    I am facing the same problem.
    Thanks
    Ian

  • Getting Java errors overlaying pages, is this Firefox or someone else?

    I'm running Firefox 33.0.3, and have Java 8 update 25 installed (the latest one, I double checked). On random web pages I'll get an overlay over the page saying that my Java is out of date and a security risk ( Exact message is..."the page at http://b1.fsqpyb.com says: WARNING!!! Your Java Version is Outdated, Have Security Risks, Please Update Now!"... the website given seems to be the same each time). Sometimes the message goes away when I refresh the page, but other times it refuses to go away. Is this a message Firefox generates or is it someone else?

    Suspiciously poor grammar and that domain name was anonymously registered only a week ago. I suspect a malware infection, possible in the form of a bad add-on.
    Here's what I suggest for tracking it down:
    (1) Open the Windows '''Control Panel''', Uninstall a Program. After the list loads, click the "Installed on" column heading to group the infections, I mean, additions, by date. This can help in smoking out undisclosed bundle items that snuck in with some software you agreed to install. Take out as much trash as possible here.
    (2) Then, in Firefox, open the '''Add-ons page''' using either:
    * Ctrl+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    In the left column, click Plugins. Set nonessential and unrecognized plugins to "Never Activate".
    In the left column, click Extensions. Then, if in doubt, disable (or Remove, if possible) unrecognized and unwanted extensions.
    Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
    (3) Check your '''Firefox connection setting''' in the Options dialog here:
    "3-bar" menu button (or Tools menu) > Options > Advanced > Network mini-tab > "Settings" button
    The default of "Use system proxy settings" should piggyback on your Windows/IE "LAN" connection settings, but you also can try "No Proxy" to see whether that works better.
    (4) Search for remaining issues with the '''scanning/cleaning tools''' listed in our support article: [[Troubleshoot Firefox issues caused by malware]]. Note that the tools are free and take considerable time to run. If they seem to finish quickly and then ask for payment, you might have a Fake AV infection. Please use the specialized forums listed in the article in that case.
    Success?

  • How can I get clean MT LION install to use my backup?

    Hi, I have a 3 year old imac that was running like crap.  I upgraded to 4 gigs of ram, erased the hard drive and did a clean install of Mountain Lion.  Before cleaning the hard drive, I had time machine do a backup onto an external USB 1 tb hard drive.  It created a folder called backups.backupdb. On the install it gave me the option of bringing everything over from the backup.  I did not want to do that because I suspected several of the user accounts were crapped up and I wanted to start completely fresh.  I assumed (which by now I should know better) that I would be able to start time maching and have it see my time machine backup and then I could go in and pick out docs and emails that I wanted to bring back.  But, it just will not see my backup.  I option while mousing over the tm icon and browse other discs but it shows up blank. I have read so many posts on this matter that my head is spinning.  I tried using the info on this page http://bigdiver.wordpress.com/2009/11/24/restoring-time-machine-backups-on-a-dif ferent-computer/  but I just get lost on the terminal commands. 
    All I really want to do is go into time machine and see this backup so I can pick out just what I want.  Can anyone guide me? Though I have been using Macs now for five years, I still have much to learn.  Thank you for reading this. John

    John Fitzpatrick wrote:
    I assumed (which by now I should know better) that I would be able to start time maching and have it see my time machine backup and then I could go in and pick out docs and emails that I wanted to bring back.
    Ordinarily, yes, you can do that.  But not on this first version of Mountain Lion.
    Enter Time Machine only shows the backups for the Mac it's running on.  The Browse Other Backup Disks option (per Time Machine - Frequently Asked Question #17) allows you to see other backups. 
    But it's broken on Mountain Lion. 
    You could probably copy things from the backups via the Finder, but you'll likely have permissions problems with the copied files (be unable to change or delete them).
    Your best bet is to use Migration Assistant to transfer your user home folders. You can omit some broad categories, such as Applications or the contents of sub-folders in home folders.  Then delete what you don't want.  Use one of the workarounds in the green box of Problems after using Migration Assistant

  • How to get underlying ViewRow from a selected Graph Component

    I have a bar graph using a view object as the data source. If a specific bar is mouse-clicked, I am retrieving the series, group, and value, per the BI Beans
    team's earlier suggestions. Is there a straightforward way to retrieve a specific row from the view object, based on the selected graph component? I looked at the API's
    for the DataAccess, GraphModel, and DataView interfaces, but did not see a 'convenient' getter method. I know I could do it with a getByPrimaryKey (with the selected component's
    series data). But I'm hoping there might be an easier way.
    Thanks

    Hii,
           You can store the data as shown in the vi, just use the signal data by converting it into the numeric form and give it instead of random data.
    Hope this will help.
    Thanks,
    Nishant
    Message Edited by Nishant on 04-16-2006 11:21 PM
    Attachments:
    file write.vi ‏31 KB

  • /var/tmp not getting cleaned out...

    This might not exactly apply to the Finder, Dock or Dashboard but it is file maintenance, and I don't see a closer match.
    I've noticed that my /var/tmp directory has a lot of files that are pretty old. There's 3 directories there that seem to be written to daily...those I wouldn't touch... But there's a whole bunch of files that are named things like: 4568943754a6d... around 56M worth each is ~1.5M
    Why are these not getting automatically cleaned up? Is there a limit to this directory that could be causing me issues. I have several but I don't dare mention them here for fear of being told to open a new post
    Thanks!

    Hi again
    does the '3 days ago' actually set the time? so '1 week ago' would be valid too?Ah, was afraid you might ask that
    '3 days ago' does "set the time" as you say. '1 week ago' might work, but the man pages are not particularly helpful on what works and what doesn't. The find man page refers you to the cvs man page, which says:
    However, cvs currently accepts a wide variety of other date formats. They are intentionally not documented here in any detail, and future versions of cvs might not accept all of them.But that gives an example of "1 hour ago" being valid, so I tried a few variations
    wacking whole directories scares me... especially since there are live directories in here that I think shouldn't be deleted... can I take this part out?Yes, you can leave out the complete second "find" command if you wish. But applications shouldn't leave files or folders lying around in /tmp or /var/tmp and expect them to still be there when they come back!
    excuse my ignorance what language is this?This is the Bourne Shell or more accurately bash. You can try reading the man page, but if you're interested I think you'd find an introductory shell scripting book a lot more readable!
    My weekly hasn't run since Nov 18th but the Monthy and daily both say Dec 1st!!!No problem. My weekly hasn't run since Nov 15th. It will eventually get run, after about a week of cpu time (not sleeping).
    Now that the periodic scripts are managed by launchd, rather than cron, they do eventually get run. Unless you are running a busy server with hundreds of users, rotating the log files is no big deal with today's typical disk sizes.

  • How to get bar plot stacked in one graph?

    Hi there,
    I am having a problem trying to get a stacked bar plot in one graph. I attached two images to show you what it looks like now and how I would like it to look.
    At the moment I am making two x,y clusters, bundle these into an array and give that as input to the XY graph. This gives me the image where the bar plots are shown next to each other. However, I want them to be shown on top of each other and I cannot find a way to do this.
    I searched this forum and the help and looked at the available properties for the XY graph, but it seems impossible. So I was wondering if anyone here is able to help me solve this.
    Thanks in advance,
    Steph.
    Attachments:
    current.png ‏7 KB
    wanted.png ‏10 KB

    Thanks! Maybe I am not understanding the terminology and a "stack graph" may not be what I am looking for, but here is my small example.
    DATE
    DATA 1
    DATA 2
    1/2008
    3
    4
    2/2008
    4
    8.5
    3/2008
    6.58
    38.9
    I would like to do a bar graph where DATA 1 AND DATA 2 overlap each other like Steph's example of a stack graph.
    and the "DATE" will be on 'x-axis'  while data 1 and data 2 will be values show on the y-axis. (Note: data 1 will always be data 2, it will show up with two colors where one color is always taller than the other).
    Is this stack graph the right path? I am new at using the graphing icons in Labview, I do not even know how to I would go about loading these as inputs to the VI.
    Please advise me on the right path. Thanks again!
    Eileen

  • Trouble getting a subvi to update a graph in real-time on the front panel

    Hi All,
    First post here, so play nice =). I am trying to update a graph on the front panel from within one of my subvis, however it does not update it in real-time. It will only show the completed graph after the subvi finishes running. I have tried to use references/property nodes and I have also tried using my chart as a global variable, but neither of those methods have worked (I am probably doing it wrong). Can anyone provide a detailed walk-through of how to do this using either one of those methods? Or perhaps even a different method?

    ModusPwnens wrote:
    This is how you do it, right?:
    Try this for a quick demo of the reference method:
    Create a VI as shown in the image.
    Select only the while loop and do "edit...create subVI" (as shown). (you will get a subVI that contains the needed connectors and is alread wired to the reference)
    Run the main VI, and the chart will update every 200ms.
    Note that this is only a draft and many things are missing. (For example, the subVI cannot be stopped at the moment. Also, you want a graph, and not a chart.)
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    updateViaSub.PNG ‏32 KB

  • Trying to get clean title transitions with CS5

    Hi -I have lot's of trouble trying to get a consistent, clean transition in CS5. Mulple systems, multple configs but here is an example of the latest.
    HP Z800
    Quadro FX 5800
    12 GB RAM
    2 x 6core XEON (X5680)
    Atto R380 RAID controller
    CalDigit HDOne Storage
    example:
    1. place title with a transparent drop shadow, fade in, the fade won't be smooth.  it will 'pop' at the end of the transition - the fade is smooth until the very end, and then jumps to opaque (or whatever opacity level is set for title/graphic)
    Rendering makes little difference, and in the case of the video behind it can sometimes result in additional blooming, jumping in opacity levels and so on.  For example if I have a cross dissolve from black on video clip, it will preview fine, but after rendering we will get color shifts, or opacity jumps instead of a smooth fade in.
    Changing from GPU to software will clear the video previews to resolve the rendered area problems, but then we are just back at unsmooth transitions of titles and so on.
    Have changed various rendering settings, codecs etc...
    any help?

    http://forums.adobe.com/message/2426130#2426130

Maybe you are looking for