Getting compilation error while writing standalone for ddi_get8

Hi All,
I have already posted a thread regarding ddi_regs_map_setup solaris system call guidance.
[Previous Query|https://forums.oracle.com/forums/thread.jspa?threadID=2314211&tstart=0]
I am writing a standalone to use this system call.
Below is my partial standalone where i have only the declaration part:
#include <stdio.h>
#include <sys/dditypes.h>
#include <sys/conf.h>
#include <sys/ddi.h>
#include <sys/sunddi.h>
int main()
dev_info_t *dip;
uint_t rnumber;
ushort_t *dev_addr;
offset_t offset;
offset_t len;
ushort_t dev_command;
ddi_device_acc_attr_t dev_attr;
ddi_acc_handle_t handle;
dev_attr.devacc_attr_version = DDI_DEVICE_ATTR_V0;
dev_attr.devacc_attr_endian_flags = DDI_STRUCTURE_LE_ACC;
dev_attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC;
return 0;
The standalone give the following compilation errors:
ddiSystemcall.c: In function `main':
ddiSystemcall.c:15: error: `ddi_device_acc_attr_t' undeclared (first use in this function)
ddiSystemcall.c:15: error: (Each undeclared identifier is reported only once
ddiSystemcall.c:15: error: for each function it appears in.)
ddiSystemcall.c:15: error: syntax error before "dev_attr"
ddiSystemcall.c:16: error: `ddi_acc_handle_t' undeclared (first use in this function)
ddiSystemcall.c:17: error: `dev_attr' undeclared (first use in this function)
ddiSystemcall.c:17: error: `DDI_DEVICE_ATTR_V0' undeclared (first use in this function)
ddiSystemcall.c:18: error: `DDI_STRUCTURE_LE_ACC' undeclared (first use in this function)
ddiSystemcall.c:19: error: `DDI_STRICTORDER_ACC' undeclared (first use in this function)
Please let me know where am i going wrong.
Thanks in advance.

Hi,
there is a WebCenter forum for WebCenter releated questions: WebCenter Portal
Frank

Similar Messages

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

Getting the error while doing PGI for depot delivery

Hi
I am getting the below error while doing PGI for Depot delivery. This error is happening only when I taking the materials from stock transfer order which has more than 10 line items. Same issue is not happening when I am taking one material in Stock transfer order in & same material in depot delivery. Please see the screen shots below attachment. I have already maintained no range for the object J_1IDEPINV for year 2014.
Regards
PK

Moved from SAP ERP SD Sales to Internationalization and Unicode. Please post all your CIN related queries here. Also ensure that before posting, you made efforts in searching in SCN or Google. The reason for this indication is the issue you posted has already been discussed many times here and you will get some clue had you searched.
G. Lakshmipathi

Getting compilation error while invoking an existing partner link.

Hi,
I am very new to BPEL.This may be a very basic issue..
Found few links on the forum related to this..but didn't understand how people solved their problems..
Created a sample project to add two numbers and return the result.[Ex : 2+ 3 = 5]
Trying to invoke that service by adding it as a partner link in other project.
Getting compile time error immediately after adding it..
Error:
[Error ORABPEL-10902]: compilation failed
[Description]: in "bpel.xml", XML parsing failed because "undefined part element.
In WSDL at "http://PC-XYZ-IN:8888/orabpel/default/BPELProcess/BPELProcess?wsdl", message part element "{http://xmlns.oracle.com/BPELProcess}BPELProcessProcessResponse" is not defined in any of the schemas.
Please make sure the spelling of the element QName is correct and the WSDL import is complete.
[Potential fix]: n/a.
(ii) how can i pass two variables to calling service using invoke option.
Since in invoke option i could see only one input variable is allowed.
Thanks in advance for the help.

the wsdl is refered correctly,I used the wizard for this..
http://PC-MSIDDHAR-IN:8888/orabpel/default/BPELProcess/BPELProcess?wsdl
For second part of the question.
Caller ----> Invoke Code ---> Partner Link for Service
Partner Link for Service expects 2 variables...
Caller i have added 2 variables as u suggested already ...
The question is how can i assign caller variables to partner link variables..[If they are more than 1)
Thx
Message was edited by:
msiddhar
Message was edited by:
msiddhar

Getting compilation error while using WCApplicationContext in Application

hi,
I am developing a custom login form for webcenter spaces for that I need to use "WCApplicationContext". But whenever I try to build the project, I am getting an error saying "cannot access oracle.webcenter.webcenterapp.context.WCApplicationContext". I have included the required "webcenter spaces client" library into the classpath but still the error remains the same. Need urgent help in this.
Regards
Ajay

Hi,
there is a WebCenter forum for WebCenter releated questions: WebCenter Portal
Frank

Getting an error while using BAPI for data upload using FB50

Hi,
Can someone please help with the error below :
To Upload Data Using FB50 , am using 'BAPI_ACC_DOCUMENT_POST' FM
and passing values as
obj_type = REACI
obj_KEY = '$'
obj_sys = t000-logsys
getting errors errors in return as
'Error in document: REACI $ R3_AFRICA
G/L account 2511510 is not defined in chart of accounts CSGP(though the account exists in the COA)
Control indicators for controlling area EU01 do not exist'.(we have not input any indicators)
Thanks

Control indicators for controlling area (t-code OKKP ) is a primary configuration before the company is set to production. Here we maintain which sub areas of controlling are activated. Have a look at those settings.
Check the validity of the accounts/cost element in the KA03 to ensure the cost element is valid on the date of transaction.
What is the error message number?

Compilation error while creating procedure

Hi,
I am getting compilation error while creating procedure
CREATE OR REPLACE My_CHANGEDATE IS
error_string VARCHAR2(400) := NULL;
BEGIN
Create table set_temp as select * from set;
CURSOR c1 is
     SELECT a.SETNUM, b.CHANGEDATE from
     set a, setsp_t2 b
     where a.setnum = b.setnum
     and trunc(a.changedate) < trunc(b.CHANGEDATE);
BEGIN
     FOR rec IN c1 LOOP
          UPDATE set SET changedate = rec.changedate
          WHERE setnum = rec.setnum;
          Insert into set_temp select * from set where setnum = rec.setnum;
          END LOOP;
     EXCEPTION
          WHEN NO_DATA_FOUND THEN
          NULL;
     WHEN OTHERS THEN
               error_string := 'My_CHANGEDATE - '||SUBSTR(SQLERRM,1,350);
DBMS_OUTPUT.PUT_LINE(error_string);
               RAISE;
END My_CHANGEDATE;

I have taken your code and cleaned it up to be more readable. Please see the comments in the code.
CREATE OR REPLACE My_CHANGEDATE
IS
        error_string VARCHAR2(400) := NULL;
BEGIN
        /* The only way to issue DDL in a procedure is to either user
         * DBMS_SQL or EXECUTE IMMEDIATE. Creating objects is generally
         * not needed or recommended in frequently run code.
        Create table set_temp as select * from set;
        /* The cursor declarations need to go in the declaration section of the
         * procedure (between IS .. BEGIN).
        CURSOR c1 is
        SELECT a.SETNUM, b.CHANGEDATE from
        set a, setsp_t2 b
        where a.setnum = b.setnum
        and trunc(a.changedate) < trunc(b.CHANGEDATE);
        BEGIN   /* Where is the END that goes with this begin? */
        /* Single record processing is generally not recommended. It is considered a "slow-by-slow" method. */
        FOR rec IN c1 LOOP
                UPDATE set SET changedate = rec.changedate
                WHERE setnum = rec.setnum;
                Insert into set_temp select * from set where setnum = rec.setnum;
        END LOOP;
EXCEPTION
        WHEN NO_DATA_FOUND THEN
                NULL;
        WHEN OTHERS THEN
                error_string := 'My_CHANGEDATE - '||SUBSTR(SQLERRM,1,350);
                DBMS_OUTPUT.PUT_LINE(error_string);
                RAISE;
END My_CHANGEDATE;My general recommendations are as follows:
1. Remove the CREATE TABLE from the procedure altogether.
2. Don't use reserved words for object names (e.g. SET)
3. Remove the record by record processing and consolidate it to a single UDPATE statement as follows (note untested):
UPDATE set s
SET     changedate = (
                        SELECT CHANGEDATE
                        FROM    SET A
                        ,       SETSO_T2 B
                        WHERE   A.SETNUM = B.SETNUM
                        AND     S.SETNUM = A.SETNUM
                        AND     TRUNC(A.CHANGEDATE) < TRUNC(B.CHANGEDATE)
WHERE EXISTS(
                SELECT NULL
                FROM    SET A
                WHERE   A.SETNUM = S.SETNUM
                )HTH!

Error while running ETL for Financials_Oracle R1213.

Hi All,
I have done all installation and configuration for OBIA 7.9.6.4. I am getting following error while running ETL for Financials_Oracle R1213.
===========================================================================================================
1)While starting DAC server, I am getting following error:
SEVERE: Incorrectly specified Post-Etl Script/Executable
================================================================================================================
2) After starting ETL Financials_Oracle R1213,
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv BIA_IS -d Domain_oracle2go2.us.oracle.com -u Administrator -p **** -f SILOS -paramfile /home/oracle/Informatica/9.0.1/server/infa_shared/SILOS.SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt SIL_InsertRowInRunTable
Status Desc : Failed
WorkFlowMessage :
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
java.lang.Thread.run(Thread.java:619)
(Number of retries : 1) pmcmd startworkflow -sv BIA_IS -d Domain_oracle2go2.us.oracle.com -u Administrator -p **** -f SILOS -paramfile /home/oracle/Informatica/9.0.1/server/infa_shared/SILOS.SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt SIL_InsertRowInRunTable 2013-11-27 11:26:59.923 INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL) has finished execution with Failed status.2013-11-27 11:26:28.855 Acquiring Resources 2013-11-27 11:26:28.857 Acquired Resources 2013-11-27 11:26:28.858 INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL) has started. ANOMALY INFO::: Error while executing : INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL)MESSAGE:::Irrecoverable Errorpmcmd startworkflow -sv BIA_IS -d Domain_oracle2go2.us.oracle.com -u Administrator -p **** -f SILOS -paramfile /home/oracle/Informatica/9.0.1/server/infa_shared/SILOS.SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt SIL_InsertRowInRunTableStatus Desc : FailedWorkFlowMessage : Error Message : Unknown reason for error code 36331ErrorCode : 36331EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
java.lang.Thread.run(Thread.java:619)
(Number of retries : 1)
pmcmd startworkflow -sv BIA_IS -d Domain_oracle2go2.us.oracle.com -u Administrator -p **** -f SILOS -paramfile /home/oracle/Informatica/9.0.1/server/infa_shared/SILOS.SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt SIL_InsertRowInRunTable
2013-11-27 11:26:59.923 INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL) has finished execution with Failed status.
====================================================================================================================
Could anyone please help me to resolve this error?
Regards,
Narottam

Did you configured Informatica???

Error while writing to a file

Hi,
I am getting an error while writing to a file.Here is the sample code in which I am getting error.The STDERR is getting printed to console but the same is not getting written to a file.
package Sample;
import java.util.*;
import java.io.*;
public class MediocreExecJavac
public static void main(String args[])
try
Runtime rt = Runtime.getRuntime();
Process proc = rt.exec("perl ic_start");
InputStream stderr = proc.getErrorStream();
InputStreamReader isr = new InputStreamReader(stderr);
BufferedReader br = new BufferedReader(isr);
FileWriter fw=new FileWriter("result.txt");
String line = null;
System.out.println("<ERROR>");
while ( (line = br.readLine()) != null)
System.out.println(line);
fw.write(line);
System.out.println("</ERROR>");
int exitVal = proc.waitFor();
System.out.println("Process exitValue: " + exitVal);
fw.close();
} catch (Throwable t)
t.printStackTrace();
}Below is the output -
<ERROR>
Can't open perl script "ic_start": No such file or directory
java.lang.NullPointerException
at java.io.Writer.write(Unknown Source)
at Sample.MediocreExecJavac.main(MediocreExecJavac.java:21)
Please tell where the program is going wrong.

i think it is just the path of file that u r missing

Getting Error In the Routine - While writing Code for the Cross Reference.

Hi,
Getting Error In the Start Routine - While writing Code for the Cross Reference from the Text table ( /BIC/TZMDES with Fields /BIC/ZMDES(Key),TXTSH ) Getting Error as [ E:Field "ZMDES" unknown ].
Transformation : IOBJ ZPRJ3(Source) -> IOBJ ZPRJC ( Target ).
The Source Fields are: 0logsys(Key),zprj3(Key),ZDOM3.
The Target Fields are : 0logsys(Key),zprjc(Key),ZDOM3, UID.
Here i am trying to Update the target Field UID by Comparing the Source Field [ zprj3(Key)] with the Text table ( /BIC/TZMDES ) and update the UID.
The Code is as below:
Global Declarations in the Start Routine:
Types: begin of itabtype,
        ZMDES type /BIC/TZMDES-/BIC/ZMDES,
        TXT type /BIC/TZMDES-TXTSH,
         end of itabtype.
data : itab type standard table of itabtype
with key ZMDES,
wa_itab like line of itab.
Routine Code :
select * from /BIC/TZMDES into corresponding fields of table itab for
all entries in SOURCE_PACKAGE
where ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3.
READ TABLE itab INTO wa_itab
WITH KEY ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3
BINARY SEARCH.
IF SY-SUBRC = 0.
RESULT = wa_itab.
CLEAR wa_itab.
The tys_SC_1 structure is :
BEGIN OF tys_SC_1,
     InfoObject: 0LOGSYS.
        LOGSYS           TYPE RSDLOGSYS,
     InfoObject: ZPRJ3.
        /BIC/ZPRJ3           TYPE /BIC/OIZPRJ3,
     InfoObject: ZDOM3.
        /BIC/ZDOM3           TYPE /BIC/OIZDOM3,
     Field: RECORD.
        RECORD           TYPE RSARECORD,
      END   OF tys_SC_1.
    TYPES:
      tyt_SC_1        TYPE STANDARD TABLE OF tys_SC_1
                        WITH NON-UNIQUE DEFAULT KEY.
Please suggest with your valuable inputs.
Thanks in Advance

I have split the code in two.. one for start routine.. other for field routine.. hope this helps
Types: begin of itabtype,
ZMDES type /BIC/TZMDES-/BIC/ZMDES,
TXT type /BIC/TZMDES-TXTSH,
end of itabtype.
data : itab type standard table of itabtype
with key ZMDES,
wa_itab like line of itab.
Start routine
select * from /BIC/TZMDES into corresponding fields of table itab for
all entries in SOURCE_PACKAGE
where ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3.
Sort itab.
field routine
CLEAR wa_itab.
READ TABLE itab INTO wa_itab
WITH KEY ZMDES = SOURCE_FIELD-/BIC/ZPRJ3
BINARY SEARCH.
IF SY-SUBRC = 0.
RESULT = wa_itab-<field name>

Getting "JBO-26080: Error while selecting entity for myEO" while updating

Hi All,
I am using jdev 10.1.3.4. I am having updatable VO. I want to update an attribute of a particular row. I wrote the below code in my BB.
ViewObject vo = am.getmyVO();
Key myKey = new Key(new Object[]{6207});
Row rw= vo.getRow(myKey);
if (rw!= null ) {
rw.setAttribute("ProcessFlag",processFlag);
am.getTransaction().commit();
But, I am getting the below error.
oracle.jbo.DMLException: JBO-26080: Error while selecting entity for myEO
Can anybody help me regarding this?
Thanx,
Abhijit

I do agree. Bt, what could be the root cause for this error?
--Abhijit

Getting an error while activating a planning area "Enter values for planning horizon From and planning horizon To for the storage time profile level"

Dear S&OP community,
I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
This what I did...
1) Created new attributes and master data objects and activated them successfully.
2) Time profile created and activated successfully
3) Trying to create planing area by assigning time profile in step 2 and assigned master data from step1..Unable to save the data and system returns
this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
My understanding is time profile needs to be active but doesn't have to have values...
Any help is appreciated.
Thanks,
Krishna

YS,
Here are my time profile settings
Level       Name          Display Horizon - Past Display Horizon - Future
1             Monthly     -6                                       11
2             Quarterly     -2                                       3
3             Yearly        -1                                       2
Time profile is active and but time profile data is not loaded
Thanks,
Krishna

I am getting error while doing MFBF for semifinisg good

Hi,
i am getting error while doing MFBF for semifinisg good
Existing standard cost estimate cannot be used
Message no. RM175
Diagnosis
This error appears under the following circumstances:
The existing standard cost estimate cannot be used for backflushing activities as the repetitive manufacturing profile was not maintained correctly when the standard cost estimate was carried out.
The standard cost estimate must come from product costing. Other cost estimates (such as base object controlling) are not possible.
Procedure
The repetitive manufacturing profile assigned to the material at the time of the planned cost estimate must be a profile for repetitive manufacturing with product cost collector.
Use product costing to create the standard cost estimate.

I had already check REM profile repetitive mfg profile final backflush w. activities.
this particular material is semifinish material attached in BOM of finish material.
backflush of finish good is possible but now new requirement is to do production booking for the semifinish material.
i had assign production version , done routing and maintain REM profile,
created material cost with quantity structure ck11n then run the costing in ck40n.
still getting the error what else is to done to able to book this thru MFBF.

HT4009 Hi, Getting an error while trying to download updates. Err Msg "Account Not in this store' Your account is not valis for use in the US store. You must switch store before purchasing' Have tried to change the store bu not successful. kindly advice

Hi, Getting an error while trying to download updates. Err Msg "Account Not in this store' Your account is not valis for use in the US store. You must switch store before purchasing' Have tried to change the store bu not successful. kindly advice

http://support.apple.com/kb/HT1311

Getting unkown errors while running the listcube for remote cube

Hi we r trying to run the listcube for remote cube .We are trying to access the oracle data by creating views and pulling it into bw using remote cube through UDConnect
We r getting uknown errors like below
Messages for DataSource 6BTV_HISTORY_FXD_CST1 from source system DB2CX
System error: Message type is unknown.
Error reading the data of InfoProvider ZR_CHFCB
If any one face the similar issue please reply me back .

Remote cube doesn´t store data in BW....it only access data from remote system and shows in a report.....the listcube TX need to find a data table in order to show the information but in this case tha remote cube doesn´t have anything.....
Regards

Getting compilation error while writing standalone for ddi_get8

Similar Messages

Maybe you are looking for