Getting Dump error for WD ABAP URL, program CX_WDR_ADAPTER_EXCEPTION======C
Hi SAP WD gurus,
Getting the below bump error while launcing the WD ABAP URL on browser.
Please help to resolve this.
The following error text was processed in system SD1 : An exception occurred that was not caught.
The error occurred on the application server isvsapsrmidev_SD1_01 and in the work process 9 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE_FOR of program CX_WDR_ADAPTER_EXCEPTION======CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C0STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
Regards,
Vinod
Edited by: Vinod Malagi on Jan 9, 2012 7:11 AM
Hello,
did you get this fixed? We are experiencing the same issue after just doing the EhP5 upgrade in our first system.
Thanks,
Ingrid Funken
Similar Messages
-
To get unicode errors for each and every program
hi,
I have written a program to retrieve all the custom programs and user exits. Now I want to pass all these programs to UCCHECK tcode to get all the errors of each program separately by writing it implicitely.
Is there any function module for uccheck tcode or else any other option. Pls tell me.
thanks & regards,
Sekhar.UCCHECK is an executable report(RSUNISCAN_FINAL). Please use SUBMIT program (RSUNISCAN_FINAL) along with selection screen field SO_OBJ_N-LOW populated with list of programs identified.
Syntax
SUBMIT report1 USING SELECTION-SCREEN '1100'
WITH SELECTION-TABLE rspar_tab
WITH selcrit2 BETWEEN 'H' AND 'K'
WITH selcrit2 IN range_tab
AND RETURN.
Regards
Ravikumar -
Short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow
hi all,
i am getting short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow.
not able to figure out the actual issue and how to solve it.
can anyone suggest?
below is the details of the short dump
Short text
Exception condition "UNKNOWN_TRANSCAT" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_SERVICE_TRG================CP" raised the
exception
condition "UNKNOWN_TRANSCAT".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_SERVICE_TRG================CP" or "CL_SERVICE_TRG================CM003"
"SORT_TRANSACTIONS"
or
"CL_SERVICE_TRG================CP" "UNKNOWN_TRANSCAT"
or
"SBIE0001 " "UNKNOWN_TRANSCAT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.Hi,
It seems like some routine are there and check your rotines , transformation etc.
Regards
sivaraju -
Keep getting this error when I run a program UC_OBJECTS_NOT_CONVERTIBLE
I created a project via CMOD for a modification to a BW extractor. It is pretty simple coding but when I try and execute the extractor via RSA3 I get the following error. I've attached the code as well and it is something with line 17. can you please help
Short text
Data objects in Unicode programs cannot be converted.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLXRSA" had to be terminated because
come across a statement that unfortunately cannot be executed.
Error analysis
The statement
"MOVE src TO dst"
requires that the operands "dst" and "src" are convertible.
Since this statement is in a Unicode program, the special conver
rules for Unicode programs apply.
In this case, these rules were violated.
Trigger Location of Runtime Error
Program SAPLXRSA
Include ZXRSAU01
Row 17
Module type (FUNCTION)
Module Name EXIT_SAPLRSAP_001
Source Code Extract
Line SourceCde
1 *&----
2 *& Include ZXRSAU01
3 *&----
4
5 TABLES: VTTK.
6 DATA: L_MCCOMVTTS LIKE MCCOMVTTS,
7 L_TABIX LIKE SY-TABIX.
8
9
10
11 CASE I_DATASOURCE.
12
13 WHEN '2LIS_08TRTLP'.
14
15 *FIND TDLNR & VSART IN THE SHIPMENT HEADER TABLE
16
>>>>> LOOP AT C_T_DATA INTO L_MCCOMVTTS.
18 L_TABIX = SY-tabix.
19 SELECT SINGLE * FROM VTTK WHERE TKNUM = L_MCCOMVTTS-TKNUM.
20
21 *FILL FIELDS WITH DATA FROM VTTK(SHIPMENT HEADER TABLE)
22 IF SY-SUBRC = 0.
23 L_MCCOMVTTS-Z_TDLNR = VTTK-TDLNR.
24 L_MCCOMVTTS-Z_VSART = VTTK-VSART.
25 MODIFY C_T_DATA FROM L_MCCOMVTTS INDEX L_TABIX.
26 ENDIF.
27 ENDLOOP.
28 ENDCASE.ra you sure the
table C_T_DATA and the work area L_MCCOMVTTS have the smae fileds with same data element .
i think somewhere ther is adifference that why systerm is umable to populate the table data in to work area..
<b>i have observed that C_T_DATA is not defined any format..
Make sure u have the same structure for the work area as well</b>
Please Close this thread.. when u r problem ise solved
Reward if Helpful
Regards
Naresh Reddy K
Message was edited by:
Naresh Reddy -
Dump error while executing this unicode program.....
Hi,
I got a program for 'Production Order Quantity Change Daily Checklist' ,but while executing i got the dump error from the following program stating tat,
The current statement is only defined for character-type data objects.
Error in the ABAP Application Program
The current ABAP program "ZPROD" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
For the statement
"READ DATASET ... INTO f"
only character-type data objects are supported at the argument position
"f".
In this case. the operand "f" has the non-character-type "u". The
current program is a Unicode program. In the Unicode context, the type
'X' or structures containing not only character-type components are
regarded as non-character-type.
Program:
REPORT ZPPORDER LINE-SIZE 180 NO STANDARD PAGE HEADING
LINE-COUNT 058(001).
TABLES: AUFK, "Order master data
AFKO, "Order header data PP orders
RESB, "Reservation/dependent requirements
MAST, "Material to BOM Link
STKO, "BOM Header
STPO. "BOM item
DATA: BEGIN OF WA,
AUART TYPE AUFK-AUART,
AUFNR TYPE AUFK-AUFNR,
AEDAT TYPE AUFK-AEDAT,
AENAM TYPE AUFK-AENAM,
WERKS TYPE AUFK-WERKS,
PLNBEZ TYPE AFKO-PLNBEZ,
GAMNG TYPE AFKO-GAMNG,
GASMG TYPE AFKO-GASMG,
MATNR TYPE RESB-MATNR,
POSNR TYPE RESB-POSNR,
BDMNG TYPE RESB-BDMNG,
BMENG TYPE STKO-BMENG,
MENGE TYPE STPO-MENGE,
END OF WA,
ITAB LIKE SORTED TABLE OF WA WITH NON-UNIQUE KEY AUFNR POSNR.
DATA: BEGIN OF ITAB2 OCCURS 0.
INCLUDE STRUCTURE WA.
DATA: END OF ITAB2.
DATA: BEGIN OF ITAB_AUFK OCCURS 0,
AUART LIKE AUFK-AUART,
AUFNR LIKE AUFK-AUFNR,
POSNR LIKE RESB-POSNR,
AEDAT LIKE AUFK-AEDAT,
AENAM LIKE AUFK-AENAM,
WERKS LIKE AUFK-WERKS,
PLNBEZ LIKE AFKO-PLNBEZ,
GAMNG(7) TYPE P DECIMALS 0,
GASMG(7) TYPE P DECIMALS 0,
MATNR LIKE RESB-MATNR,
BDMNG(7) TYPE P DECIMALS 0,
BMENG(7) TYPE P DECIMALS 0,
MENGE(7) TYPE P DECIMALS 3.
DATA: END OF ITAB_AUFK.
DATA: FDATE LIKE SY-DATUM,
LDATE LIKE SY-DATUM.
DATA: X_AUFNR LIKE AFKO-AUFNR,
X_MENGE(7) TYPE P DECIMALS 0,
X_ERR(3).
DATA: W_DATASET1(500) VALUE '/usr/sap/trans/data/'.
SELECT-OPTIONS T_WERKS FOR AUFK-WERKS OBLIGATORY.
SELECT-OPTIONS T_AUFNR FOR AUFK-AUFNR.
SELECT-OPTIONS T_AEDAT FOR AUFK-AEDAT.
PARAMETERS PDATA LIKE W_DATASET1.
CONCATENATE W_DATASET1 PDATA INTO W_DATASET1.
PERFORM F_COLLECT_DATA.
FORM F_COLLECT_DATA.
OPEN DATASET W_DATASET1 FOR INPUT IN TEXT MODE encoding default.
DO.
IF sy-subrc <> 0.
EXIT.
ENDIF.
READ DATASET W_DATASET1 INTO WA.
APPEND WA TO ITAB2.
ENDDO.
CLOSE DATASET W_DATASET1.
SELECT AAUFNR AAUART AAEDAT AAENAM A~WERKS
BPLNBEZ BGAMNG B~GASMG
CMATNR CBDMNG C~POSNR
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM ( AUFK AS A
INNER JOIN AFKO AS B ON BAUFNR = AAUFNR
INNER JOIN RESB AS C ON CAUFNR = AAUFNR )
WHERE A~AEDAT IN T_AEDAT
AND A~WERKS IN T_WERKS.
LOOP AT ITAB INTO WA.
CLEAR MAST.
SELECT SINGLE * FROM MAST WHERE MATNR = WA-PLNBEZ
AND WERKS = WA-WERKS.
CLEAR STKO.
SELECT SINGLE * FROM STKO WHERE STLNR = MAST-STLNR
AND STLAL = MAST-STLAL.
CLEAR STPO.
SELECT SINGLE * FROM STPO WHERE STLNR = MAST-STLNR
AND POSNR = WA-POSNR.
WA-BMENG = STKO-BMENG.
WA-MENGE = STPO-MENGE.
MODIFY ITAB FROM WA.
AT NEW AUFNR.
SKIP.
ENDAT.
LOOP AT ITAB2 WHERE AUFNR = WA-AUFNR
AND POSNR = WA-POSNR.
IF ITAB2-GAMNG <> WA-GAMNG OR
ITAB2-GASMG <> WA-GASMG OR
ITAB2-BDMNG <> WA-BDMNG.
CLEAR X_MENGE.
IF ITAB2-BMENG <> 0.
X_MENGE = ITAB2-GAMNG / ITAB2-BMENG * ITAB2-MENGE.
ENDIF.
CLEAR X_ERR.
IF ITAB2-BDMNG <> X_MENGE.
X_ERR = 'Err'.
ENDIF.
FORMAT COLOR COL_TOTAL.
WRITE: / ITAB2-AUART UNDER 'Type',
ITAB2-AUFNR UNDER 'Prod Order',
ITAB2-AEDAT UNDER 'Last Chg Dt',
ITAB2-AENAM UNDER 'Last Chg by',
ITAB2-WERKS UNDER 'Plant',
ITAB2-PLNBEZ UNDER 'Material',
(10) ITAB2-GAMNG UNDER 'Order Qty' DECIMALS 0,
(10) ITAB2-GASMG UNDER 'Scrap Qty' DECIMALS 0,
ITAB2-POSNR UNDER 'Item',
ITAB2-MATNR UNDER 'Component Req',
(10) ITAB2-BDMNG UNDER 'Req Qty' DECIMALS 0,
X_MENGE UNDER 'BOM Qty' COLOR COL_TOTAL,
ITAB2-BMENG UNDER 'BOM Base',
ITAB2-MENGE UNDER 'BOM Comp',
X_ERR UNDER 'Rmks' COLOR COL_TOTAL.
CLEAR X_MENGE.
IF WA-BMENG <> 0.
X_MENGE = WA-GAMNG / WA-BMENG * WA-MENGE.
ENDIF.
CLEAR X_ERR.
IF WA-BDMNG <> X_MENGE.
X_ERR = 'Err'.
ENDIF.
FORMAT COLOR OFF.
WRITE: / WA-AUART UNDER 'Type',
WA-AUFNR UNDER 'Prod Order',
WA-AEDAT UNDER 'Last Chg Dt',
WA-AENAM UNDER 'Last Chg by',
WA-WERKS UNDER 'Plant',
WA-PLNBEZ UNDER 'Material',
(10) WA-GAMNG UNDER 'Order Qty' DECIMALS 0,
(10) WA-GASMG UNDER 'Scrap Qty' DECIMALS 0,
WA-POSNR UNDER 'Item',
WA-MATNR UNDER 'Component Req',
(10) WA-BDMNG UNDER 'Req Qty' DECIMALS 0,
X_MENGE UNDER 'BOM Qty' COLOR COL_TOTAL,
WA-BMENG UNDER 'BOM Base',
WA-MENGE UNDER 'BOM Comp',
X_ERR UNDER 'Rmks' COLOR COL_TOTAL.
ENDIF.
ENDLOOP.
ENDLOOP.
LOOP AT ITAB2.
LOOP AT ITAB INTO WA WHERE AUFNR = ITAB2-AUFNR
AND POSNR = ITAB2-POSNR.
DELETE ITAB2.
ENDLOOP.
SELECT SINGLE * FROM AUFK WHERE AUFNR = ITAB2-AUFNR.
IF SY-SUBRC <> 0.
DELETE ITAB2.
ENDIF.
ENDLOOP.
OPEN DATASET W_DATASET1 FOR OUTPUT IN TEXT MODE encoding default.
LOOP AT ITAB INTO WA.
TRANSFER WA TO W_DATASET1.
ENDLOOP.
LOOP AT ITAB2 INTO WA.
TRANSFER WA TO W_DATASET1.
ENDLOOP.
CLOSE DATASET W_DATASET1.
ENDFORM.
TOP-OF-PAGE.
FORMAT COLOR COL_TOTAL.
WRITE: / SY-DATUM, SY-UZEIT, SY-REPID, SY-UNAME,
50 'Daily Qty Changed Checklist for Production Order',
120 SY-PAGNO.
SKIP.
WRITE: / 'Plant ', T_WERKS-LOW.
WRITE: ' Last Change Date ', T_AEDAT-LOW, ' to ', T_AEDAT-HIGH.
SKIP.
WRITE: /1 'Type',
6 'Prod Order',
17 'Last Chg Dt',
29 'Last Chg by',
42 'Plant',
49 'Material',
69 'Order Qty',
83 'Scrap Qty',
99 'Item',
105 'Component Req',
121 'Req Qty',
135 'BOM Qty',
149 'BOM Base',
163 'BOM Comp',
178 'Rmks'.
ULINE.
WRITE: / 'Previous data :- '.
FORMAT COLOR OFF.
WRITE: / 'Current data :- '.
INITIALIZATION.
LDATE = SY-DATUM.
LDATE = LDATE - 1.
FDATE = LDATE.
MOVE: FDATE TO T_AEDAT-LOW.
APPEND T_AEDAT.
PDATA = 'AE001'.
So,give me any suggestions where to customize r do rectify the error.This will be useful for me.
Advance Thnx..*REPORT ZPROD.
REPORT ZPPORDER LINE-SIZE 180 NO STANDARD PAGE HEADING
LINE-COUNT 058(001).
TABLES: AUFK, "Order master data
AFKO, "Order header data PP orders
RESB, "Reservation/dependent requirements
MAST, "Material to BOM Link
STKO, "BOM Header
STPO. "BOM item
DATA: BEGIN OF WA,
AUART TYPE AUFK-AUART,
AUFNR TYPE AUFK-AUFNR,
AEDAT TYPE AUFK-AEDAT,
AENAM TYPE AUFK-AENAM,
WERKS TYPE AUFK-WERKS,
PLNBEZ TYPE AFKO-PLNBEZ,
GAMNG TYPE AFKO-GAMNG,
GASMG TYPE AFKO-GASMG,
MATNR TYPE RESB-MATNR,
POSNR TYPE RESB-POSNR,
BDMNG TYPE RESB-BDMNG,
BMENG TYPE STKO-BMENG,
MENGE TYPE STPO-MENGE,
END OF WA,
ITAB LIKE SORTED TABLE OF WA WITH NON-UNIQUE KEY AUFNR POSNR.
DATA: BEGIN OF ITAB2 OCCURS 0.
INCLUDE STRUCTURE WA.
DATA: END OF ITAB2.
DATA: BEGIN OF ITAB_AUFK OCCURS 0,
AUART LIKE AUFK-AUART,
AUFNR LIKE AUFK-AUFNR,
POSNR LIKE RESB-POSNR,
AEDAT LIKE AUFK-AEDAT,
AENAM LIKE AUFK-AENAM,
WERKS LIKE AUFK-WERKS,
PLNBEZ LIKE AFKO-PLNBEZ,
GAMNG(7) TYPE P DECIMALS 0,
GASMG(7) TYPE P DECIMALS 0,
MATNR LIKE RESB-MATNR,
BDMNG(7) TYPE P DECIMALS 0,
BMENG(7) TYPE P DECIMALS 0,
MENGE(7) TYPE P DECIMALS 3.
DATA: END OF ITAB_AUFK.
DATA: FDATE LIKE SY-DATUM,
LDATE LIKE SY-DATUM.
DATA: X_AUFNR LIKE AFKO-AUFNR,
X_MENGE(7) TYPE P DECIMALS 0,
X_ERR(3).
DATA: W_DATASET1(500) VALUE '/usr/sap/trans/data/'.
SELECT-OPTIONS T_WERKS FOR AUFK-WERKS OBLIGATORY.
SELECT-OPTIONS T_AUFNR FOR AUFK-AUFNR.
SELECT-OPTIONS T_AEDAT FOR AUFK-AEDAT.
PARAMETERS PDATA LIKE W_DATASET1.
CONCATENATE W_DATASET1 PDATA INTO W_DATASET1.
PERFORM F_COLLECT_DATA.
FORM F_COLLECT_DATA.
OPEN DATASET W_DATASET1 FOR INPUT IN TEXT MODE encoding default.
DO.
IF sy-subrc <> 0.
EXIT.
ENDIF.
READ DATASET W_DATASET1 INTO WA.
APPEND WA TO ITAB2.
ENDDO.
CLOSE DATASET W_DATASET1.
SELECT AAUFNR AAUART AAEDAT AAENAM A~WERKS
BPLNBEZ BGAMNG B~GASMG
CMATNR CBDMNG C~POSNR
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM ( AUFK AS A
INNER JOIN AFKO AS B ON BAUFNR = AAUFNR
INNER JOIN RESB AS C ON CAUFNR = AAUFNR )
WHERE A~AEDAT IN T_AEDAT
AND A~WERKS IN T_WERKS.
LOOP AT ITAB INTO WA.
CLEAR MAST.
SELECT SINGLE * FROM MAST WHERE MATNR = WA-PLNBEZ
AND WERKS = WA-WERKS.
CLEAR STKO.
SELECT SINGLE * FROM STKO WHERE STLNR = MAST-STLNR
AND STLAL = MAST-STLAL.
CLEAR STPO.
SELECT SINGLE * FROM STPO WHERE STLNR = MAST-STLNR
AND POSNR = WA-POSNR.
WA-BMENG = STKO-BMENG.
WA-MENGE = STPO-MENGE.
MODIFY ITAB FROM WA.
AT NEW AUFNR.
SKIP.
ENDAT.
LOOP AT ITAB2 WHERE AUFNR = WA-AUFNR
AND POSNR = WA-POSNR.
IF ITAB2-GAMNG <> WA-GAMNG OR
ITAB2-GASMG <> WA-GASMG OR
ITAB2-BDMNG <> WA-BDMNG.
CLEAR X_MENGE.
IF ITAB2-BMENG <> 0.
X_MENGE = ITAB2-GAMNG / ITAB2-BMENG * ITAB2-MENGE.
ENDIF.
CLEAR X_ERR.
IF ITAB2-BDMNG <> X_MENGE.
X_ERR = 'Err'.
ENDIF.
FORMAT COLOR COL_TOTAL.
WRITE: / ITAB2-AUART UNDER 'Type',
ITAB2-AUFNR UNDER 'Prod Order',
ITAB2-AEDAT UNDER 'Last Chg Dt',
ITAB2-AENAM UNDER 'Last Chg by',
ITAB2-WERKS UNDER 'Plant',
ITAB2-PLNBEZ UNDER 'Material',
(10) ITAB2-GAMNG UNDER 'Order Qty' DECIMALS 0,
(10) ITAB2-GASMG UNDER 'Scrap Qty' DECIMALS 0,
ITAB2-POSNR UNDER 'Item',
ITAB2-MATNR UNDER 'Component Req',
(10) ITAB2-BDMNG UNDER 'Req Qty' DECIMALS 0,
X_MENGE UNDER 'BOM Qty' COLOR COL_TOTAL,
ITAB2-BMENG UNDER 'BOM Base',
ITAB2-MENGE UNDER 'BOM Comp',
X_ERR UNDER 'Rmks' COLOR COL_TOTAL.
CLEAR X_MENGE.
IF WA-BMENG <> 0.
X_MENGE = WA-GAMNG / WA-BMENG * WA-MENGE.
ENDIF.
CLEAR X_ERR.
IF WA-BDMNG <> X_MENGE.
X_ERR = 'Err'.
ENDIF.
FORMAT COLOR OFF.
WRITE: / WA-AUART UNDER 'Type',
WA-AUFNR UNDER 'Prod Order',
WA-AEDAT UNDER 'Last Chg Dt',
WA-AENAM UNDER 'Last Chg by',
WA-WERKS UNDER 'Plant',
WA-PLNBEZ UNDER 'Material',
(10) WA-GAMNG UNDER 'Order Qty' DECIMALS 0,
(10) WA-GASMG UNDER 'Scrap Qty' DECIMALS 0,
WA-POSNR UNDER 'Item',
WA-MATNR UNDER 'Component Req',
(10) WA-BDMNG UNDER 'Req Qty' DECIMALS 0,
X_MENGE UNDER 'BOM Qty' COLOR COL_TOTAL,
WA-BMENG UNDER 'BOM Base',
WA-MENGE UNDER 'BOM Comp',
X_ERR UNDER 'Rmks' COLOR COL_TOTAL.
ENDIF.
ENDLOOP.
ENDLOOP.
LOOP AT ITAB2.
LOOP AT ITAB INTO WA WHERE AUFNR = ITAB2-AUFNR
AND POSNR = ITAB2-POSNR.
DELETE ITAB2.
ENDLOOP.
SELECT SINGLE * FROM AUFK WHERE AUFNR = ITAB2-AUFNR.
IF SY-SUBRC <> 0.
DELETE ITAB2.
ENDIF.
ENDLOOP.
OPEN DATASET W_DATASET1 FOR OUTPUT IN TEXT MODE encoding default.
LOOP AT ITAB INTO WA.
TRANSFER WA TO W_DATASET1.
ENDLOOP.
LOOP AT ITAB2 INTO WA.
TRANSFER WA TO W_DATASET1.
ENDLOOP.
CLOSE DATASET W_DATASET1.
ENDFORM.
TOP-OF-PAGE.
FORMAT COLOR COL_TOTAL.
WRITE: / SY-DATUM, SY-UZEIT, SY-REPID, SY-UNAME,
50 'Daily Qty Changed Checklist for Production Order',
120 SY-PAGNO.
SKIP.
WRITE: / 'Plant ', T_WERKS-LOW.
WRITE: ' Last Change Date ', T_AEDAT-LOW, ' to ', T_AEDAT-HIGH.
SKIP.
WRITE: /1 'Type',
6 'Prod Order',
17 'Last Chg Dt',
29 'Last Chg by',
42 'Plant',
49 'Material',
69 'Order Qty',
83 'Scrap Qty',
99 'Item',
105 'Component Req',
121 'Req Qty',
135 'BOM Qty',
149 'BOM Base',
163 'BOM Comp',
178 'Rmks'.
ULINE.
WRITE: / 'Previous data :- '.
FORMAT COLOR OFF.
WRITE: / 'Current data :- '.
INITIALIZATION.
LDATE = SY-DATUM.
LDATE = LDATE - 1.
FDATE = LDATE.
MOVE: FDATE TO T_AEDAT-LOW.
APPEND T_AEDAT.
PDATA = 'AE001'. -
Error in the ABAP Application Program
Dear All
While Incoming invoice posting ( MIRO). When i put amount in Unpl. Del. Csts field system give following Error
Error in the ABAP Application Program
The current ABAP program "SAPLMRMK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
When changing or deleting one or more lines of the internal table
"\FUNCTION-POOL=MR1M\DATA=YDRSEG[1]-CO" or when inserting in the table
"\FUNCTION-POOL=MR1M\DATA=YDRSEG[1]-CO", 0 was used as
the line index. An index less than or equal to zero is not
allowed.
The error can occur when using the following options:
1. "INDEX idx" for specifying the line number in the table
"\FUNCTION-POOL=MR1M\DATA=YDRSEG[1]-CO"
where you want to change, insert or delete.
2. "FROM idx" for specifying the start index when deleting a line
area from or inserting a line area into the table
"\FUNCTION-POOL=MR1M\DATA=YDRSEG[1]-CO".
3. "TO idx" for specifying the end index when deleting a line
area from or inserting a line area into the table
Pls help to resolve above issue
Regards,
VipinHi,
have you checked transaction SM13?
if so, what information have you got there?
Best regards.
Edited by: Pablo Casamayor on Sep 30, 2011 3:33 PM -
For some reason, I cannot watch a video I recorded on my iPhone. I can see the first frame of it in the gallery, but when I click on it, I get the error that the requested URL could not be found on this server. Why would that display, if the file is on my iPhone? I'm not using iCloud to back up photos,, but I do have Photo Streaming enabled. Is there any way to get to this video? I don;t want to lose it, as it was a priceless moment.
Ok, then as long as the videos reside on your PC, do the following:
1) In iTunes on your PC, unsync the music videos (On the Music tab, uncheck "Include Music Videos, and then sync your iPad).
2) Sync the music videos back to the iPad (check that same box again and sync once more).
Does this fix it? -
has anyone else gotten this type of message? Just got an ipad and realized our itunes is not working. I think when the most recent version was being installed, it got interrupted.
ThanksI am getting an error writing to file: C:\Program Files\iTunes\iTunes Resouirces\pl.lproj\AppletVStream.nib\objects.xib. Verify that you have Access to that directory.
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Error for COM Routine application program (return code 40028)
Hi,
When we loading data in Planning Book ,we are getting below error
Error for COM Routine application program (return code 40028)Hi,
Did you try checking your COM build? The COM communicates between your database and Livecache and fetches the data requested. The last time we had this, SAP recommended COM upgrade. -
I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded". Any advice on what I can do in order to watch this movie that I rented a couple of weeks ago?
Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.
-
I want to install Snow Leopard Server on our MacPro(2.66) using Mac Mini Snow Leopard Server disks? I kept getting an error for backwards compatibility. Is this possible or do I need topurchase another copy of Snow Leopard Server?
The OS disks that are shipped with a particular product
are set up so that tey will only install on that product.
It will install on any Mini of that exact vintage, but that
is all.
This is to prevent people from doing exactly what you
are trying to do. The license for OSX shipped with any
is only valid for that product. Also, Snow Leopard,
including Server, is only permitted to be run on one
computer at a time. Bottom line, unlike Lion, legally
you cannot install the same copy on multiple
computers unless some "family pack" or site license
is purchased.
Yes, you need to purchase another copy.
The copy of Snow Leopard license is here:
http://images.apple.com/legal/sla/docs/macosx_snowleopard.pdf -
Where can i get transport file for bc400's template programs to import
hi
where can i get transport file for bc400's template programs to import to miniwas
would like to do the exercises for tw10 and tw12
regards
janThanks Spencer.
I downloaded it, etc. and that didn't work.
It actually seems to work the same way as before I downloaded that driver, meaning, it prints but leaves it in the "# Document Pending" status.
Since the wireless HP print server isn't working (No connectMgr.exe file) there's no connection and therefore the doc won't print.
RE: Print/Server software out of date. The software was working for many months after originally installing it on this laptop. Then it just stopped. Now it can't find the .exe file and that's odd.
If I could find that file I could just save it where it needed to be and I'd be good to go.
Thanks for the help.
Going to uninstall and reinstall again, just for fun. I'll report back.
J -
Getting Runtime errors for smartforms in Quality.
| The function module " " is called,
| but cannot be found in the library.
|
| Error in the ABAP Application Program
|
| The current ABAP program "ZMMRFQ_SERVICE" had to be terminated because it has
| come across a statement that unfortunately cannot be executed.
653| SELECT SINGLE bedat FROM ekko INTO edate WHERE ebeln = p_ebeln.
| 654|ENDFORM. " get_data
| 663|FORM smartform . |
| 664| CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME' |
| 665| EXPORTING |
| 666| formname = 'ZMM_RFQ_SERVICE' |
| 667|* VARIANT = ' ' |
| 668|* DIRECT_CALL = ' ' |
| 669| IMPORTING |
| 670| fm_name = fm_name |
| 671| EXCEPTIONS |
| 672| no_form = 1 |
| 673| no_function_module = 2 |
| 674| OTHERS = 3. |
| 675| |
| 676| IF sy-subrc <> 0. |
| 677| WRITE: / 'ERROR 1'. |
| 678|* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO |
| 679|* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4. |
| 680| ENDIF. |
| 681| |
| 682|*loop at t_final. |
|>>>>>| CALL FUNCTION fm_name |
| 684| EXPORTING |
| 685| |
| 686| |
| 687| control_parameters = control |
| 688| output_options = output_options |
| 689| user_settings = space "'X' |
| 690| |
| 691|* sum = sum |
| 692| |
| 693|* bdoc = bdoc |
| 694| |
| 695|* l_tlines1 = l_tlines1 |
| 696|* l_tlines2 = l_tlines2 |
| 697| |
| 698|* l_tlines3 = l_tlines3 |
| 699|* |
| 700|* l_tlines4 = l_tlines4 |
| 701|* |
| 702|* l_tlines5 = l_tlines5 |
Any kind of help or inputs will be appreciated.
Regards,
Abhinab Mishra
Edited by: Abhinab Mishra on Sep 4, 2009 2:52 PMHi,
put a break point at FM 'SSF_FUNCTION_MODULE_NAME' and check what is the value you are gettting in variable fm_name, then go to SE37 and check the FM name in fm_name is available or not..
Hope it helps!!
Rgds,
Pavan -
I keep getting an error (for twelve updates), when trying to update CS5 Master Collection. I used chat, and was told to come here.
update directly, http://www.adobe.com/downloads/updates/
-
Neither dreamweaver nor photoshop will update. I get this error for both, "U44M1P7"
Neither dreamweaver nor photoshop will update. I get this error for both, "U44M1P7"
Try downloading the updates from http://www.adobe.com/downloads/updates/ and install them manually.
Maybe you are looking for
-
How do I delete documents and data on the iPhone 5?
I've been seeing responses such as turning it off, so I did. However I didnt change my memory at all and when I found out whats using it up it was message with (saved) next to it. So i deleted some conversations from other contacts, but it barely dro
-
Cannot make changes t oDTP - Source system does not exist
Hi, I cannot open my DTP to make changes. when I tried to double click I got this error Source system X01CLNT001 does not exist Message no. RSAR203 I have tried connection test from SM59 and there seems to be no problem. How do I resolve this? thanks
-
Why can't I see my address book contents in Icloud?
I was under the impression that the contents of my address book would migrate across to iCloud! I have the iCloud account selected under 'Preferences' in my Address Book and I have deleted and added my iCloud account to also try and activate the mig
-
How to programmatically add UDVs to project?
Hi all, I have successfully used something like this to programatically add shared variables to an LVLIB (the code assumes that the library associated with the Container Reference contains at least one variable): An example output would be: Container
-
Third party tools to upgrade sharepoint 2007 to sharepoint 2013
I'm looking for third party tools that can be used to upgrade sharepoint 2007 to sharepoint 2013. Any suggestions? Thanks, JohnWeb