Getting dump while assigning resource to role
Hi,
We are using BAPI_BUS2177_STAFFING_ADD to assign resource to role.
It is assigning first resource to first role in first project. And giving dump for next resource to role assignment for the same project.
Short dump description is like as follows:
The exception 'CX_DPR_FATAL_ERROR' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_DPR_AUTHORIZATION_SERVICES=CP' has to be
terminated.
The problem is of "COMMIT". I ma not understanding where to write exact commit. Even if we are commiting at project level it is giving dump.
Could you please give any suggestion on it.
Thanks & Regards,
Anil Salekar
Hello Kaixiang,
When you add staffing to project then commit after each resource assignment. That will avoid the dump.
Use:
CALL FUNCTION 'BAPI_CPROJECTS_COMMIT_WORK'
TABLES
return = it_return.
Note: Re award if useful
Thanks,
Appasaheb..
Similar Messages
-
Team,
I got an error while creating a User for Domain Account. Below is the screen shot of the error (error : 15401)
Database instance is on SQL 2000 SP3. ( I know it is out of support, But the customer is relutanct to upgrade)
On Google search, i found below article which is best matching for this error
http://support.microsoft.com/kb/324321
I have follows each step of troubleshooting. But still the issue persists.
Step 1. The login does not exist == The login is very much exist in the domain as i am able to add the same domain id to other database instances
Step 2. Duplicate security identifiers == i have used this query to find duplicate SID
/* SELECT name FROM syslogins WHERE sid = SUSER_SID ('YourDomain\YourLogin') */
But there was only one row returned with create date of today's.
Error while Assigning database level role (db_datareader) to SQL login (Domain Account)
Step 3. Authentication failure == Domain is available. User is able to login on other servers via RDP connection.
Step 4. Case sensitivity == Database collation is set to Case insensitivity. (CI)
Other two 5. Local Accounts & 6. Name resolution == is not applicable to me.
I tried other ways also.
A. Creating login and providing permission in one go only = User account is not created
B. Instead of GUI, use query to create login and provide required permission = Same error.
Does anybody has faced any such situation
ChetanSee the below output
srvid
sid
xstatus
xdate1
xdate2
name
password
dbid
language
isrpcinmap
ishqoutmap
selfoutmap
NULL
0x010500000000000515000000A1F66E1BFC1DC75D26E72530A2B80400
14
20:25.9
57:33.4
UKBAA\LHRAPPMuttavarapuS
NULL
1
us_english
0
0
0
Chetan -
I am getting dump while downloading
i am getting dump while downloading file to presentaion server .
please suggest me .
code is like below.
PARAMETERS : p_dwn TYPE dxfile-filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_dwn.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME =
DYNPRO_NUMBER =
FIELD_NAME =
IMPORTING
file_name = p_dwn.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = p_dwn
filetype = 'ASC'
write_field_separator = 'X'
TABLES
data_tab = t_zvtpmheader.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.Hi Veeru,
This dump you are getting because of type mismatch, just change the file path as follows :-
data declaration should be like this.
PARAMETERS : p_dwn TYPE STRING. <<<----
it will surely work.
cheers
Dhirendra -
Error While Assigning Approval Management Roles to User
Dear All,
While assigning "Approvals Management...." Roles to the user through User management responsibility and Click on to Apply Button I am getting following Error.
oracle.apps.fnd.framework.OAException: java.sql.SQLException: ORA-01403
ORA-06512: at "APPS.UMX_ACCESS_ROLES_PVT"
Can anybody help me to get rid of this error.
Thanks In Advance
JithindevHi,
Standard roles are not assigned to users directly.Make sure that copy the role from standard roles then change naming convention like your company specification.
Ex: standard role : SAP_BC_JSF_COMMUNICATION_RO
Step:1: go to t-code: PFCG and give the role name in role tab SAP_BC_JSF_COMMUNICATION_RO
Step:2: press copy button and change the naming convention.
Step:3: Assign to the user.
I hope it will help you.
kiran kumar.v -
Error while assigning the fallowing role to the user
Hi,
ERROR 2007-01-18 14:13:25
CJS-30196 Role SAP_BC_JSF_COMMUNICATION_RO is not assigned to user SAPJSF
i am getting the fallowing error while trying to assigning the fallowing role to the user any body through some light in to it.
Thanks
kiran.BHi,
Standard roles are not assigned to users directly.Make sure that copy the role from standard roles then change naming convention like your company specification.
Ex: standard role : SAP_BC_JSF_COMMUNICATION_RO
Step:1: go to t-code: PFCG and give the role name in role tab SAP_BC_JSF_COMMUNICATION_RO
Step:2: press copy button and change the naming convention.
Step:3: Assign to the user.
I hope it will help you.
kiran kumar.v -
Getting dump while posting goods receipt through TCode migo
Hi,
I am getting dump after I click on post button in TCode 'MIGO'.
Short text
The current application triggered a termination with a short dump.
Short text of error message:
Document number 9 5000000000 2010 was already assigned
Long text of error message:
Diagnosis
Document number 5000000000 in company code 9 and fiscal year 2010
has already been assigned.
System Response
Termination of processing.
Procedure
Check document number range 50 in company code 9 and fiscal year
2010 and correct the number range status if necessary.
Technical information about the message:
Message class....... "F5"
Number.............. 152
Variable 1.......... 9
Variable 2.......... 5000000000
Variable 3.......... 2010
Variable 4.......... 50
So please help me what I can do?
Thanks,
Moderator Message: The short dump is self-explanatory.
Edited by: kishan P on Nov 18, 2010 11:17 AMHi,
plx try to chane the status in IE02
Go to edit ,manual options , in that delete the HU assignemtn
and then save it and come out of it ..
Hope that helps -
Getting Dump while Mapping data source.
Hi Expert,
Am getting below DUMP while trying to map data source in SEGW transaction.
Could you please suggest what could be possible cause for this?
Category ABAP Programming Error
Runtime Errors SYNTAX_ERROR
ABAP Program CL_SADL_GW_UI_ALV_SADL_MAPPINGCP
Application Component BC-ESI-ESF-GW
Date and Time 28.07.2014 18:30:59
Short Text
Syntax error in program "CL_SADL_GW_UI_ALV_SADL_MAPPINGCP ".
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_SADL_GW_UI_PLUG============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
In include "CL_SADL_GW_UI_ALV_SADL_MAPPINGCM005 ", in line 14 of program
"CL_SADL_GW_UI_ALV_SADL_MAPPINGCP ", the following syntax errors
have occurred:
Thanks & Regards,
GirdhariThanks Jasmin for the reply.
Yes.. Am following the E2E guide.
I tried by opening another external window by executing ok-code osegw but still getting same dump.
Below is the complete dump info.
Category ABAP Programming Error
Runtime Errors SYNTAX_ERROR
ABAP Program CL_SADL_GW_UI_ALV_SADL_MAPPINGCP
Application Component BC-ESI-ESF-GW
Date and Time 29.07.2014 15:44:03
|Short Text |
| Syntax error in program "CL_SADL_GW_UI_ALV_SADL_MAPPINGCP ". |
|What happened? |
| Error in the ABAP Application Program |
| |
| The current ABAP program "CL_SADL_GW_UI_PLUG============CP" had to be |
| terminated because it has |
| come across a statement that unfortunately cannot be executed. |
| In include "CL_SADL_GW_UI_ALV_SADL_MAPPINGCM005 ", in line 14 of program |
| "CL_SADL_GW_UI_ALV_SADL_MAPPINGCP ", the following syntax errors |
| have occurred: |
| "CS_TABLE_LAYOUT" is not type-compatible with formal parameter "CS_TAB |
| LE_LAYOUT". |
| |
| |
| |
| Author and last person to change the include are: |
| Author SAP |
| Last changed by "SAP " |
|Error analysis |
| The following syntax error has occurred in program |
| CL_SADL_GW_UI_ALV_SADL_MAPPINGCP : |
| "CS_TABLE_LAYOUT" is not type-compatible with formal parameter "CS_TAB |
| LE_LAYOUT". |
| |
| " " |
|Trigger Location of Runtime Error |
| Program CL_SADL_GW_UI_PLUG============CP |
| Include CL_SADL_GW_UI_PLUG============CM002 |
| Row 11 |
| Module Type (METHOD) |
| Module Name /IWBEP/IF_SBUI_PLUGIN~CREATE_VIEW |
|Source Code Extract |
|Line |SourceCde |
| 1| METHOD /iwbep/if_sbui_plugin~create_view. |
| 2| CASE iv_name. |
| 3| WHEN if_sadl_gw_ui_c=>gc_dialog-mapping_container. " custom container for the ALV Grid|
| 4| CREATE OBJECT ro_view TYPE cl_sadl_gw_ui_map_ds_sadl_c |
| 5| EXPORTING |
| 6| io_controller = io_controller |
| 7| iv_plugin = if_sadl_gw_ui_c=>gc_ui_plugin |
| 8| iv_name = iv_name. |
| 9| |
| 10| WHEN if_sadl_gw_ui_c=>gc_dialog-entity_set_prop_map_alv_grid. " ALV GRID mapping table|
|>>>>>| CREATE OBJECT ro_view TYPE cl_sadl_gw_ui_alv_sadl_mapping |
| 12| EXPORTING |
| 13| io_controller = io_controller |
| 14| iv_plugin = if_sadl_gw_ui_c=>gc_ui_plugin |
| 15| iv_name = iv_name. |
| 16| |
| 17| WHEN if_sadl_gw_ui_c=>gc_dialog-entity_set_assoc_map_alv_grid. " ALV GRID mapping tabl|
| 18| CREATE OBJECT ro_view TYPE cl_sadl_gw_ui_alv_map_assoc |
| 19| EXPORTING |
| 20| io_controller = io_controller |
| 21| iv_plugin = if_sadl_gw_ui_c=>gc_ui_plugin |
| 22| iv_name = iv_name. |
| 23| |
| 24| WHEN if_sadl_gw_ui_c=>gc_dialog-data_source_tree. " SADL entity ALV tree |
| 25| CREATE OBJECT ro_view TYPE cl_sadl_gw_ui_tree_ds_sadl_c |
| 26| EXPORTING |
| 27| io_controller = io_controller |
| 28| iv_plugin = if_sadl_gw_ui_c=>gc_ui_plugin |
| 29| iv_name = iv_name. |
| 30| ENDCASE. |
|Active Calls/Events |
|No. Ty. Program Include Line |
| Name |
| 23 METHOD CL_SADL_GW_UI_PLUG============CP CL_SADL_GW_UI_PLUG============CM002 11 |
| CL_SADL_GW_UI_PLUG=>/IWBEP/IF_SBUI_PLUGIN~CREATE_VIEW |
| 22 METHOD /IWBEP/CL_SBUI_SETUP==========CP /IWBEP/CL_SBUI_SETUP==========CM00E 7 |
| /IWBEP/CL_SBUI_SETUP=>/IWBEP/IF_SBUI_SETUP_FACTORY~CREATE_COMPONENT_VIEW |
| 21 METHOD /IWBEP/CL_SBUI_VIEW_COMPOSITE=CP /IWBEP/CL_SBUI_VIEW_COMPOSITE=CM004 6 |
| /IWBEP/CL_SBUI_VIEW_COMPOSITE=>CREATE_COMPONENT_VIEW |
| 20 METHOD CL_SADL_GW_UI_MAP_DS_SADL_C===CP CL_SADL_GW_UI_MAP_DS_SADL_C===CM00B 2 |
| CL_SADL_GW_UI_MAP_DS_SADL_C=>_ADD_COMPONENT_VIEW |
| 19 METHOD CL_SADL_GW_UI_MAP_DS_SADL_C===CP CL_SADL_GW_UI_MAP_DS_SADL_C===CM008 11 |
| CL_SADL_GW_UI_MAP_DS_SADL_C=>DO_SETUP_INSTANCE |
| 18 METHOD /IWBEP/CL_SBUI_VIEW===========CP /IWBEP/CL_SBUI_VIEW===========CM003 58 |
| /IWBEP/CL_SBUI_VIEW=>/IWBEP/IF_SBUI_COMMAND_HANDLER~EXECUTE_COMMAND |
| 17 METHOD /IWBEP/CL_SBUI_SETUP==========CP /IWBEP/CL_SBUI_SETUP==========CM00E 12 |
| /IWBEP/CL_SBUI_SETUP=>/IWBEP/IF_SBUI_SETUP_FACTORY~CREATE_COMPONENT_VIEW |
| 16 METHOD /IWBEP/CL_SBUI_SETUP==========CP /IWBEP/CL_SBUI_SETUP==========CM00I 17 |
| /IWBEP/CL_SBUI_SETUP=>CREATE_FRAMESET_EDITOR |
| 15 METHOD /IWBEP/CL_SBUI_SETUP==========CP /IWBEP/CL_SBUI_SETUP==========CM00G 59 |
| /IWBEP/CL_SBUI_SETUP=>/IWBEP/IF_SBUI_SETUP_FACTORY~CREATE_ELEMENT_EDITOR |
| 14 METHOD /IWBEP/CL_SBUI_CONTROLLER=====CP /IWBEP/CL_SBUI_CONTROLLER=====CM015 22 |
| /IWBEP/CL_SBUI_CONTROLLER=>GET_ASSIGNED_EDIT_TOOL |
| 13 METHOD /IWBEP/CL_SBUI_CONTROLLER=====CP /IWBEP/CL_SBUI_CONTROLLER=====CM00A 33 |
| /IWBEP/CL_SBUI_CONTROLLER=>/IWBEP/IF_SBUI_CONTROLLER~ON_NAVIGATION_REQUESTED |
| 12 METHOD /IWBEP/CL_SBUI_DP_CMD_CREA_MA=CP /IWBEP/CL_SBUI_DP_CMD_CREA_MA=CM001 53 |
| /IWBEP/CL_SBUI_DP_CMD_CREA_MA=>DO_EXECUTE_COMMAND |
| 11 METHOD /IWBEP/CL_SBUI_COMMAND========CP /IWBEP/CL_SBUI_COMMAND========CM002 4 |
| /IWBEP/CL_SBUI_COMMAND=>/IWBEP/IF_SBUI_COMMAND_HANDLER~EXECUTE_COMMAND |
| 10 METHOD /IWBEP/CL_SBUI_CONTROLLER=====CP /IWBEP/CL_SBUI_CONTROLLER=====CM00E 9 |
| /IWBEP/CL_SBUI_CONTROLLER=>HANDLE_COMMAND_OF_PLUGIN |
| 9 METHOD /IWBEP/CL_SBUI_CONTROLLER=====CP /IWBEP/CL_SBUI_CONTROLLER=====CM00Y 97 |
| /IWBEP/CL_SBUI_CONTROLLER=>HANDLE_COMMAND |
| 8 METHOD /IWBEP/CL_SBUI_CONTROLLER=====CP /IWBEP/CL_SBUI_CONTROLLER=====CM00C 138 |
| /IWBEP/CL_SBUI_CONTROLLER=>/IWBEP/IF_SBUI_CONTROLLER~ON_COMMAND_REQUESTED |
| 7 METHOD /IWBEP/CL_SBUI_SCREEN=========CP /IWBEP/CL_SBUI_SCREEN=========CM001 18 |
| /IWBEP/CL_SBUI_SCREEN=>ON_PAI_COMMAND |
| 6 MODULE (PAI) /IWBEP/SAPLFG_SBUI_SB_MAIN /IWBEP/LFG_SBUI_SB_MAINI01 14 |
| PAI_0100_COMMAND |
| 5 METHOD /IWBEP/SAPLFG_SBUI_SB_MAIN /IWBEP/LFG_SBUI_SB_MAINCI1 34 |
| LCL_SCREEN_0100=>DO_CALL_SCREEN |
| 4 METHOD /IWBEP/CL_SBUI_SCREEN=========CP /IWBEP/CL_SBUI_SCREEN=========CM003 17 |
| /IWBEP/CL_SBUI_SCREEN=>START_SCREEN |
| 3 METHOD /IWBEP/CL_SBUI_CONTROLLER=====CP /IWBEP/CL_SBUI_CONTROLLER=====CM00U 50 |
| /IWBEP/CL_SBUI_CONTROLLER=>START_SCREEN |
| 2 METHOD /IWBEP/CL_SBUI_CONTROLLER=====CP /IWBEP/CL_SBUI_CONTROLLER=====CM004 33 |
| /IWBEP/CL_SBUI_CONTROLLER=>/IWBEP/IF_SBUI_SERVICE_BUILDER~START |
| 1 EVENT /IWBEP/R_SBUI_SERVICE_BUILDER /IWBEP/R_SBUI_SERVICE_BUILDER 19 |
| START-OF-SELECTION |
Thanks,
Girdhari -
Getting Warning while assigning Dimension in to Model in version 10.0
Hi,
Iam getting an warning message "Control definition not valid because new Dimension are added in to Model" & "Control result was reset because new Dimension are added in to Model" while assigning Dimensions to the Model.
Please help me on this issue. Screenshot attached.
Regards,
SudheerHi,
Controls might exist on this model.
To check for the existing Controls.Goto Aministartion-->Rules -->Controls . After you adding the new dimension you have to revisit the controls which were already existing.
Thanks,
Raju -
Getting dump while loading master data
Hi,
i am gettin dump while loading master data genrated by copa,
that gtwa_not_assigned.
Best regards,
dushyant.hi,
see weather that master data contain attribute or not,
if not than un check master data field from the master data attribute tab,
and than try to load it again.
Dushyant. -
Getting Dump while using PYXX_READ_PAYROLL_RESULT FM
I m trying to get the gross salary and ESI contribution amount for an indian based employee. While using the FM 'PYXX_READ_PAYROLL_RESULT' i m getting the following dump.
************************************************************************************************************************************************************An exception occurred that is explained in detail below.The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', wa not caught in procedure "PYXX_READ_PAYROLL_RESULT" "(FUNCTION)", nor was it propagated by RAISING clause.Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated. The reason for the exception is:
Call to FORM "IMPORT_RESULT" is incorrect:
The actual parameter no. 2 has a different data type in the
PERFORM than requested for the FORM "IMPORT_RESULT" in program %_T06K40".
and it is showing the dump result here
ELSE.
PERFORM import_client_spec IN PROGRAM (subroutine_pool-name)
USING client
key
payroll_result
import_subrc
pcl2_version_number
typepool_version_number
IF FOUND.
Pls help me to solve the issue as it very high priroty workHi Faisal,
Before the FM the Sy-Subrc is zero only and i have declared the exception part also..
IF sy-subrc = 0.
CALL FUNCTION 'PYXX_READ_PAYROLL_RESULT'
EXPORTING
clusterid = 'IN'
employeenumber = P0001-pernr
sequencenumber = it_rgdir-seqnr
filter_cumulations = ''
CHANGING
payroll_result = it_payresult
EXCEPTIONS
illegal_isocode_or_clusterid = 1
error_generating_import = 2
import_mismatch_error = 3
subpool_dir_full = 4
no_read_authority = 5
no_record_found = 6
versions_do_not_match = 7
error_reading_archive = 8
error_reading_relid = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Endif.
Thanks! -
Error while assigning portal custom role
Hi All,
We have a custom role which we use to assign to the users. till now we are able to assign it without any problem. But now as i need to assign it to someone, i got an error stating that "An error occured while adding user assignments; to see the correct status, perform a new assigned user search".
Can anybody help us in finding out the reason of the error and in rectifying the error.
Thanks & Regards,
RaviHi Raghu,
Thanks for your reply..
This role is existing in the PCD, and this error is coming, while assinging this role any users... it is working fine with the existing users, who are having this role before. This is happening only when we are assigning this role to some new user.
I dont think this has some relation with the backend, as the role assignment is part of the Portal itself.
And also here we dont have seperate UME, and we are using r3 users only with single sign on.....
Hi Jithendar,
Thanks fo your reply.....I will do that backend roles check also for those users and see whether any backend role variations happened for these users.
Thanks & Regards,
Ravi -
Getting error while assigning ABAP Query to Tr.Code
Hi Guys,
There is a problem iam facing with ABAP query while transporting which need to solved asap. It will very greatfull if u guys can resolve this problem.
My problem is, I created one ABAP Query with Name ASSETOVERVIEW. I had transported this even, now when iam going to assign it to one transaction code with se93 lets say ZAOR. I need to give its description and program name in se93 right. now my question is what is program name i need to give in se93. Bcoz in SQ01 where i created the query, there is no name as 'program name' rather there is 'Name' in that we will create the query name i.e, ASSETOVERVIEW. In se93 u give tr.code and when u see down there will be radiobuttons in 'start object',in that i had checked program and selection screen (report transaction) is this right button i had checked or any other i need to check?. I had assigned this name i.e,ASSETOVERVIEW and development class and then when i check the name for syntax check its giving "'ASSETOVERVIEW' does not exist". I don't understand what program name i need to give.
If u guys can help me out with this problem it will be very much appreciable and definetly can get the reward points.
Thanks for as usual help in advance.
Regards.Hi omer,
1. Just run the query.
2. one selection screen will come
3. then using SYSTEM---->STATUS, (from menu)
look for the program name
4. the program name will be something wired foramt.
/asdfasdf/asdfdas etc.
5. Give that name in se93.
regards,
amit m. -
Reg : dump while assigning personnel no to position
When assigning personnel number to position in PA30 and once when I save I am getting a dump
how to solve this please help me....
Runtime Errors GETWA_NOT_ASSIGNED
Date and Time 07.04.2009 01:37:56
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLHRWF" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to access an unassigned field symbol
(data segment 32770).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
Trigger Location of Runtime Error
Program SAPLHRWF
Include LHRWFU03
Row 96
Module type (FUNCTION)
Module Name HR_ASSEMBLE_OBJECTKEY
Source Code Extract
Line SourceCde
66 OTHERS = 1.
67
68 * v========================== XRGUNI ============================v
69 *LOOP AT KEYFIELDS.
70 * LOOP AT STRUCTURE_PKEY WHERE FIELDNAME EQ KEYFIELDS-REFFIELD.
71 * BUSINESSOBJECTKEY+KEYFIELDS-OFFSET(KEYFIELDS-INTLENGTH) =
72 * KEY_OF_RECORD+STRUCTURE_PKEY-OFFSET(STRUCTURE_PKEY-DDLEN).
73 * ENDLOOP.
74 * IF SY-SUBRC NE 0.
75 ** fatal error! BusObjectKey doesn't refer Infotypekey defined in DDIC
76 ** structure PAKEY/PBKEY
77 * ENDIF.
78 *ENDLOOP.
79
80 * sort table keyfields to create correct objectkey
sort keyfields by editorder.
loop at keyfields.
clear fname.
build fname for actual target field
concatenate keyfields-refstruct '-' keyfields-reffield into fname.
assign (fname) to <bo_key_field>.
DATA d_ref TYPE REF TO DATA.
CREATE DATA d_ref TYPE (fname).
ASSIGN d_ref->* TO <bo_key_field>.
now <bo_key_field> is declared with type fname
build fname for actual source field
clear fname.
concatenate 'key_of_record' '-' keyfields-reffield into fname.
assign (fname) to <source_value>.
fill target field with corresponding value
move <source_value> to <bo_key_field>.
get length of actual target field to calculate offset for next loop
describe field <bo_key_field> length bokf_length in character mode.
move <bo_key_field> to businessobjectkey+bok_filled_to.
bok_filled_to = bok_filled_to + bokf_length.
endloop.
========================== XRGUNI ============================
ENDFUNCTION.
Edited by: VENKATESH MADANAGOPAL on Apr 7, 2009 7:52 AM
Edited by: VENKATESH MADANAGOPAL on Apr 7, 2009 7:53 AMCheck the Functional Module GETWA_NOT_ASSIGNED once SE37
Not sure but i doubt................. -
Error Message while assigning resource to work orders
Hi All,
We have the MRS tool integration with service work orders for scheduling. When we assign the resources with 9 hours as duration there is no error. When we allocate more than 9 hours for some resources, not all, we receive the error message as
" Duration 29,160 S is not a multiple of 15 minutes " . These duration of secs varies when the duration is varied > 9 hours.
We have checked the planning board profile configurations but nothing seems to be visible. In customising we have the following settings,
Time Granularity : 15 mins
Min duraiton of assignments: 15 mins
Automatic Assignment Splits
Min duraiton : 2 hours
Max overtime hours : 2 hours
Max Ratio is % : 75
Can anyone throw some light on this?
Regards,
SelvaHi Anil Satya,
The MRS is integrated with Service Order types and the operations are selected for each order then the assignment of hours takes place in MRS.
If the assignment is done for 9 hours then there is no such error. These errors are very specific to some personnel numbers ( not for all ) where the duration is more than 9 hours.
Is there any availability of resources for this operation / job through configuration settings? Why such a question is some resources even when 15 or 20 hours is assigned , no errors exists.
Hope this explanation provides a better clarity.
Regards,
Selva -
Getting dump while calling adobe form
Hello All,
I am working on a webdynpro application and within the application I am calling a adobe form, when I call the adobe form I am getting the following short dump:
Error in the ABAP Application Program
The current ABAP program "CL_WD_ADOBE_SERVICES==========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/1BCDWB/SAPLSM00000027 " in
include "/1BCDWB/LSM00000027F01 " in
line 587:
"Field "BKPF-WAERS" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. ."
I looked at the adobe form and the interface and the field WAERS is being defined there but I am not sure then why I am getting this dump.
Can you please help me on this.
Thanks,
Rajat
Moderator message: wrong forum, please have a look in the dedicated "Web Dynpro ABAP" forum.
Edited by: Thomas Zloch on Feb 9, 2011 3:23 PMHi,
Try to generate the interface and adobe form and also the generated FM "/1BCDWB/SAPLSM00000027"
Regards,
Srini.
Maybe you are looking for
-
[SOLVED] unable to play mp3 or flac files in mpd, .dts files play fine
I had a perfect running mpd setup before I tried to fiddle around with some dependancies to get xbmc-svn to compile without errors. I installed some AUR packages (ffmpeg-svn, x264-git, libva-sds, libvpx, libid3tag). After that I started to experience
-
Recently upgraded to Mavericks and iMovie '13, and suddenly I'm beach balling like mad?
I upgraded to Mavericks and iMovie '13 recently, and have been working on a video project in iMovie for the last few days. I hadn't been having any issues, but now I'm 'beach-balling' almost constantly, not just in iMovie, but everywhere. Opening a n
-
First tab missing in second window
I have multiples tabs opened in 2 browser windows. Every time I exited Firefox by choosing File - Exit so that the tabs can be opened when Firefox is launched. This works fine on version 9. After the upgrade (since 10.0.1), the first tab in 2nd windo
-
Changing the LiveCycle ES4 Launch Pad Output Folder for PDF Conversion
I have an instance of Adobe Live Cycle ES4 on WebSphere installed on a Windows 2008 R2 server. We're leveraging the Launch Pad desktop GUI as a PDF conversion tool for our end users. The document to PDF conversion functionality is working great but t
-
Other mailboxes with full permission does not appear in Outlook
There are 3 users - A, B and C User C has full permission on A's and B's mailbox. When 'C' accesses Outlook on wifi network, all three mailboxes appear in Outlook but when 'C' accesses Outlook on a broadband (different network), only C's mailbox appe