Getting Dump while using PYXX_READ_PAYROLL_RESULT FM
I m trying to get the gross salary and ESI contribution amount for an indian based employee. While using the FM 'PYXX_READ_PAYROLL_RESULT' i m getting the following dump.
************************************************************************************************************************************************************An exception occurred that is explained in detail below.The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', wa not caught in procedure "PYXX_READ_PAYROLL_RESULT" "(FUNCTION)", nor was it propagated by RAISING clause.Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated. The reason for the exception is:
Call to FORM "IMPORT_RESULT" is incorrect:
The actual parameter no. 2 has a different data type in the
PERFORM than requested for the FORM "IMPORT_RESULT" in program %_T06K40".
and it is showing the dump result here
ELSE.
PERFORM import_client_spec IN PROGRAM (subroutine_pool-name)
USING client
key
payroll_result
import_subrc
pcl2_version_number
typepool_version_number
IF FOUND.
Pls help me to solve the issue as it very high priroty work
Hi Faisal,
Before the FM the Sy-Subrc is zero only and i have declared the exception part also..
IF sy-subrc = 0.
CALL FUNCTION 'PYXX_READ_PAYROLL_RESULT'
EXPORTING
clusterid = 'IN'
employeenumber = P0001-pernr
sequencenumber = it_rgdir-seqnr
filter_cumulations = ''
CHANGING
payroll_result = it_payresult
EXCEPTIONS
illegal_isocode_or_clusterid = 1
error_generating_import = 2
import_mismatch_error = 3
subpool_dir_full = 4
no_read_authority = 5
no_record_found = 6
versions_do_not_match = 7
error_reading_archive = 8
error_reading_relid = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Endif.
Thanks!
Similar Messages
-
Short Dump while using BAPI_PS_PRECOMMIT to set Project Definition Status
Hi All,
I am getting a short dump while using BAPI_PS_PRECOMMIT for setting the Project Definition status..
The requirement is to create a Project Definition and then set its status to REL from CRTD. For this purpose i am using the BAPI's in the following sequence :
1. BAPI_PS_INITIALIZATION
2. BAPI_PROJECT_MAINTAIN
3. BAPI_BUS2001_SET_STATUS
4. BAPI_PS_PRECOMMIT
5. BAPI_TRANSACTION_COMMIT
The Proj Def creation is happening successfully in step2. Interestingly, when I debug the program and stop at PRECOMMIT BAPI the program does not give a dump. I have also tried to give COMMIT WORK / WAIT FOR n SECONDS after BAPI_BUS2001_SET_STATUS, to give BAPI sometime for DB update but nothing seems to be a permanent solution.
Please give your views on a solution for this problem..
Thanks & Regards,
SomilCan you please check how to post code in SDN ...
I cannot read your code properly -
Classification System CA-CL: Problems / Dumps while using a new class type
Hi All,
You'd really make my day by helping me out w. hints or even a solution. Would reward points for your efforts...
The problem: in order to develop a class hierachy of product groups (in industry system, Rel. 6.40) I created a new class type (let's call it ZWG).
While doing so R/3 requsted me to provide info on the objects to assign to this class type as well as the transaction for displaying these objects. For Product Groups (material classes) this is object-table T023 and transaction WG24.
Furthermore the sys demands the implementation of a function module. This module's task is to check the existence of a given object as well as the locking and later unlocking in the process of classifying objects. Following SAP's naming convention I implemented and activated FM OBJECT_CHECK_T023.
After that I created a new class (FIRST_CLASS) of class-type ZWG.
I managed to assign exactly one (1) prod-grp to this class but afterwards I only receive dumps while using transactions CL20N, CL24N to assign objects.
The Message from ST22 says:
Assignment error: Overwriting a protected field.
Error in ABAP application program.
The current ABAP program "SAPLCLCV" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Do I have to debug throughout thís enormous amount of coding now? :-(((
Hope someone get's my "message in a bottle"
Best Regards
UdoYatin please see attached for warning.I am trying to create Z class using 001
-
Strange Dump while using HR_INFOTYPE_OPERATION.
Hi frnz,
I am facing dump while using the FM 'HR_INFOTYPE_OPERATION' as below. <b>If I swap positions of w_p0041-endda and w_p0041-begda it does not give a dump but error msg is generated saying that no selection in the period(as obviously dates are in propper range).</b> <u>Whlie testing the FM in SE37 with the same data, it works fine.</u> Please help me find the problem.
data: TCLAS like PSPAR-TCLAS,
OPERATION like PSPAR-ACTIO,
infty like PRELP-INFTY.
infty = '0041'.
OPERATION = 'MOD'.
TCLAS = 'A'.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
INFTY = infty
NUMBER = w_p0041-pernr
SUBTYPE =
OBJECTID =
LOCKINDICATOR =
VALIDITYEND = w_p0041-endda
VALIDITYBEGIN = w_p0041-begda
RECORDNUMBER =
RECORD = w_p0041
OPERATION = OPERATION
TCLAS = TCLAS
DIALOG_MODE = '0'
NOCOMMIT = SPACE
VIEW_IDENTIFIER =
SECONDARY_RECORD =
IMPORTING
RETURN = Return
KEY =Hi all ,
I have already tried converting date to internal format, the data types are also fine. I am not able to paste the screen shot so here is a part of it. Please help.
************DUMP************************************
If we can not remap we would like to just re-raise the
exception like below like "RAISE EXCEPTION exception.".
Unfortunately the kernel will then forget about the
original source position.
So this is the fallback strategy. Calling this method
is only allowed if the exception can be resolved. Since
this is not the case we indicate a parameter violation.
RAISE EXCEPTION TYPE cx_hrpa_invalid_parameter
EXPORTING
previous = exception
parameter = 'EXCEPTION'.
ENDMETHOD.
********************END**************
Thanks
Sachin -
Short dumps while using J3A9 & VK12
We are implementing SAP ECC 6.0 and are experiencing short dumps while using transactions J3A9 and VK12. They all point to program /AFS/SD_DISP_CONDITION_TABLE and related Includes. I haven't found any information regarding this program on this site or in OSS, mostly due to the fact that the program is only 2 months old, which is troubling enough...
If anyone is experiencing similar issues, please feel free to respond. I have opened an OSS note with SAP and they are having trouble recreating the issue as it doesn't happen consistently.
Thanks and best regards,
Chris MowlWe are implementing SAP ECC 6.0 and are experiencing short dumps while using transactions J3A9 and VK12. They all point to program /AFS/SD_DISP_CONDITION_TABLE and related Includes. I haven't found any information regarding this program on this site or in OSS, mostly due to the fact that the program is only 2 months old, which is troubling enough...
If anyone is experiencing similar issues, please feel free to respond. I have opened an OSS note with SAP and they are having trouble recreating the issue as it doesn't happen consistently.
Thanks and best regards,
Chris Mowl
10/22/08: Several OSS notes have been created regarding this issue but none of them have solved it. The two most recent notes are 1262962 & 1225190. If you are having this problem. start with these notes. -
I am getting dump while downloading
i am getting dump while downloading file to presentaion server .
please suggest me .
code is like below.
PARAMETERS : p_dwn TYPE dxfile-filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_dwn.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME =
DYNPRO_NUMBER =
FIELD_NAME =
IMPORTING
file_name = p_dwn.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = p_dwn
filetype = 'ASC'
write_field_separator = 'X'
TABLES
data_tab = t_zvtpmheader.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.Hi Veeru,
This dump you are getting because of type mismatch, just change the file path as follows :-
data declaration should be like this.
PARAMETERS : p_dwn TYPE STRING. <<<----
it will surely work.
cheers
Dhirendra -
Is it common that iPhone purchased in other Country may get heated while using 3G network ?
Is it common that iPhone purchased in other Country may get heated while using 3G network ?
My iPhone5 gets heated when I am on 3G Network and this device is purchased in another country which I am not a Resident-of.
Please assist. Thanks !About ControlPlane
-
My iphone 5 gets hot while using it and while charging too.... Please help me what should i do?? Should i replace the battery....?? Because it gets hot even within 5 minutes also.... And it is happening from 2 weeks daily.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring > http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
I have create Logic App under Azure App Services, I am getting
error while using HTTP connector and calling POST action to a Web API which is deployed as website on Azure.
Following are the screen shots:
Login App Connector Diagram:
hemaMarking as answered since no response on request for more information - assuming that you found what was wrong in the inputs. Let us know if you're still having trouble.
http://twitter.com/joshtwist -
Ipod touch 4 gets hot while using some apps like angry birds?
Is it normal for the upper back of the ipod touch 4 to get hot while using some apps like angry birds? Is this a potential battery problem? It doesnt get hot while charging or playing songs... Just when using some game apps. I assume that it has something to do with battery drain, should I be concerned?
When the iPod is used heavily like for games it is norma for the iPod to get warm. Unless you hav short battery life I would not be concerned.
-
I have 5s and is getting heat while using it and durin charging
I have 5s 7.0.4 (64G) and is getting heat while using it and durin charging
thanks dear friend,
but from Apple - Batteries - Notebooks:
Apple does not recommend leaving your portable plugged in all the time !!!
it's opposite of what you saying ! -
IPad is getting heat while using skype
Hi
Please advice me a solution, my iPad is getting heat while using skype.
Thanks
Satyado not use anyother app while you are using skype , its not your software fault problem is regarding to your device,physically check your device from where you bought it
-
Short dump while using BAPI_PO_CREATE1
Hi all,
I am facing this short dump while executing my program that uses BAPI_PO_CREATE1.
The error is 'Exception condition "failure" raised'.
The trigger location of runtime error is
Program : CL_HANDLE_MANAGER_MM====================CP
Include: CL_HANDLE_MANAGER_MM=====================CM005
Module name: GET
Source code:
Method GET.
If my_manager is initial.
Call method get_manager.
endif.
call method my_manager-> search EXporting im_id = im_id
Importing ex_handle = ex_handle
Exceptions failure = 01.
If sy-subrc <>0.
raise failure.
endif.
I am a beginner in ABAP. Plz help.Hi ,
I faced the similar situation once , in my case when i passed the Delivery indicator value in the Item Table as well as Itemx Table , i was facing this error .
what i suggest you is to pass it at the Item table only , not at the itemx Table.
it worked for me .
try this and reply for the same. -
Getting dump when using do_sum in alv field cat in the output of the report
Dear Freinds,
Iam getting the alv report when i click on the segma field (Sum) on my salary
field iam getting dump. and also if i try to print my alv output iam getting dump , only
happening to my custom report.
i have used the following code pleae correct me .
This perform is used for Layout settings
perform st_layout_build using gs_layout.
form st_layout_build using st_ls_layout type slis_layout_alv.
st_ls_layout-no_input = 'X'.
st_ls_layout-colwidth_optimize = 'X'.
st_ls_layout-zebra = 'X'.
st_ls_layout-detail_popup = 'X'.
endform. " st_layout_build
Field Catalog details
perform st_fieldcat_init changing gt_fieldcat.
form st_fieldcat_init changing fp_i_fieldcat type slis_t_fieldcat_alv.
clear ls_fieldcat.
ls_fieldcat-col_pos = 1.
ls_fieldcat-fieldname = 'ORGUNIT'.
ls_fieldcat-seltext_l = 'Orgunit'.
ls_fieldcat-no_out = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 2.
ls_fieldcat-fieldname = 'ORGTEXT'.
ls_fieldcat-seltext_l = 'Orgdesc'.
ls_fieldcat-no_out = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'SALARY'.
ls_fieldcat-seltext_l = 'Salary'.
ls_fieldcat-col_pos = 3.
ls_fieldcat-outputlen = 15.
ls_fieldcat-do_sum = 'X'.
ls_fieldcat-datatype = 'CURR'. "CURR
append ls_fieldcat to fp_i_fieldcat.
endform.
Variant
perform st_variant_init using gs_variant g_repid.
form st_variant_init using st_gs_variant type disvariant
st_repid like sy-repid.
clear st_gs_variant.
st_gs_variant-report = st_repid.
endform. " st_variant_init
g_repid = sy-repid.
perform st_comment_build using gt_list_top_of_page[].
form st_comment_build using st_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
Listenüberschrift: Typ H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = text-000.
append ls_line to st_lt_top_of_page.
endform. " st_comment_build
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_buffer_active = 'X'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_callback_program = g_repid
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
i_structure_name = 'i_final' "c_i_final "'objec'
i_save = g_save
is_variant = gs_variant
tables
t_outtab = fp_i_pyrol_final
exceptions
program_error = 1
others = 2.
if sy-subrc ne 0.
message e018. " Displaying the ALV GRID has failed
endif.
Please could any one let me know why iam getting dump when iam clicking for total
on my salary field.
Regards
lathaDear Chandu,
my code iam giving in details
types : begin of ty_output_data,
staffno type pernr_d,
staffname type emnam,
grade type stell,
orgunit type orgeh,
orgtext type hr_mcstext,
psgroup type trfgr, " Pay Scale Group
salary type maxbt, "PAD_AMT7S,
rrefunded type pad_amt7s,
leavepay type pad_amt7s,
mshortfal type pad_amt7s, " Medical Shortfall
echkshfal type pad_amt7s, " Execute checkup shortfall
ofindeduc type pad_amt7s, " Other Finance Deduction
mtyprem type pad_amt7s, " maternity premium
vpbonus type pad_amt7s, " VP/Bonus
gratuity type pad_amt7s, " Gratuity
vpay type pad_amt7s, " Variable pay
mallowance type pad_amt7s, " Meal Allowance
overtime type pad_amt7s, " overtime
other type pad_amt7s, " OTHER
pfundeecon type pad_amt7s, " PFund Employee's Contribution
banktrnsfer type pad_amt7s, " Bank Transfer
count type i,
end of ty_output_data.
data : i_final type standard table of ty_output_data.
iam getting all my data in the internal table I_FINAL.
perform get_final_alv using i_final.
form get_final_alv using fp_i_pyrol_final type ty_t_output_data.
*local variable declarations
data : l_v_idx type sy-tabix.
*local work areas
data : l_wa_final type ty_output_data.
g_save = 'A'.
This perform is used for Layout settings
perform st_layout_build using gs_layout.
Field Catalog details
perform st_fieldcat_init changing gt_fieldcat.
Variant
perform st_variant_init using gs_variant g_repid.
g_repid = sy-repid.
perform st_comment_build using gt_list_top_of_page[].
if not fp_i_pyrol_final is initial.
delete adjacent duplicates from fp_i_pyrol_final comparing all fields.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_buffer_active = 'X'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_callback_program = g_repid
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
i_structure_name = 'i_final' "c_i_final "'objec'
i_save = g_save
is_variant = gs_variant
tables
t_outtab = fp_i_pyrol_final
exceptions
program_error = 1
others = 2.
if sy-subrc ne 0.
message e018. " Displaying the ALV GRID has failed
endif.
endif.
endform. " get_final_alv
form st_layout_build using st_ls_layout type slis_layout_alv.
st_ls_layout-no_input = 'X'.
st_ls_layout-colwidth_optimize = 'X'.
st_ls_layout-zebra = 'X'.
st_ls_layout-detail_popup = 'X'.
endform. " st_layout_build
form st_fieldcat_init changing fp_i_fieldcat type slis_t_fieldcat_alv.
data: ls_fieldcat type slis_fieldcat_alv.
clear ls_fieldcat.
ls_fieldcat-col_pos = 1.
ls_fieldcat-fieldname = 'ORGUNIT'.
ls_fieldcat-seltext_l = 'Orgunit'.
ls_fieldcat-no_out = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 2.
ls_fieldcat-fieldname = 'ORGTEXT'.
ls_fieldcat-seltext_l = 'Orgdesc'.
ls_fieldcat-no_out = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 5.
ls_fieldcat-fieldname = 'STAFFNAME'.
ls_fieldcat-no_out = 'X'.
ls_fieldcat-seltext_l = 'StaffName'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 4.
ls_fieldcat-fieldname = 'STAFFNO'.
ls_fieldcat-no_out = 'X'.
ls_fieldcat-seltext_l = 'StaffNo.'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 6.
ls_fieldcat-fieldname = 'GRADE'.
ls_fieldcat-seltext_l = 'Grade'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 3.
ls_fieldcat-fieldname = 'COUNT'.
ls_fieldcat-seltext_l = 'Headcount'.
append ls_fieldcat to fp_i_fieldcat.
if the field name is 'Salary' then do a sum on this field.
IF fp_fname = c_betrg.
l_wa_fieldcat-do_sum = c_x.
ENDIF.
NOTE : IAM GETTING PROBLEM IN THE BELOW SALARY.
IAM JUST CHECKING ITSELF NOT ALLOWING ME TO EXECUTE
clear ls_fieldcat.
ls_fieldcat-fieldname = 'SALARY'.
ls_fieldcat-seltext_l = 'Salary'.
ls_fieldcat-col_pos = 7.
ls_fieldcat-outputlen = 20.
ls_fieldcat-do_sum = 'X'.
ls_fieldcat-datatype = 'CURR'. "CURR
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 9.
ls_fieldcat-fieldname = 'LEAVEPAY'.
ls_fieldcat-seltext_l = 'Leave Pay'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 10.
ls_fieldcat-fieldname = 'MSHORTFAL'.
ls_fieldcat-seltext_l = 'Med.Sfall'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 11.
ls_fieldcat-fieldname = 'ECHKSHFAL'.
ls_fieldcat-seltext_l = 'EX.Chckup.Sfall'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 12.
ls_fieldcat-fieldname = 'OFINDEDUC'.
ls_fieldcat-seltext_l = 'Oth.Fin.Deduction'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 13.
ls_fieldcat-fieldname = 'MTYPREM'.
ls_fieldcat-seltext_l = 'Mat.Premium'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 14.
ls_fieldcat-fieldname = 'VPBONUS'.
ls_fieldcat-seltext_l = 'VP/Bonus'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 15.
ls_fieldcat-fieldname = 'GRATUITY'.
ls_fieldcat-seltext_l = 'Gratuity'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 16.
ls_fieldcat-fieldname = 'VPAY'.
ls_fieldcat-seltext_l = 'Variable Pay'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 17.
ls_fieldcat-fieldname = 'MALLOWANCE'.
ls_fieldcat-seltext_l = 'Meal.Allowance'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 18.
ls_fieldcat-fieldname = 'OVERTIME'.
ls_fieldcat-seltext_l = 'Overtime'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 19.
ls_fieldcat-fieldname = 'OTHER'.
ls_fieldcat-seltext_l = 'Other'.
append ls_fieldcat to fp_i_fieldcat.
pfundeecon
clear ls_fieldcat.
ls_fieldcat-col_pos = 20.
ls_fieldcat-fieldname = 'P FUND EMPLOYEES CONTRIBUTION'.
ls_fieldcat-seltext_l = 'P.Fund.Emp.Contrib'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 21.
ls_fieldcat-fieldname = 'BANKTRNSFER'.
ls_fieldcat-seltext_l = 'Payment'.
append ls_fieldcat to fp_i_fieldcat.
endform. " st_fieldcat_init
form st_variant_init using st_gs_variant type disvariant
st_repid like sy-repid.
clear st_gs_variant.
st_gs_variant-report = st_repid.
endform. " st_variant_init
form st_comment_build using st_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
Listenüberschrift: Typ H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = text-000.
append ls_line to st_lt_top_of_page.
endform. " st_comment_build
FORM TOP_OF_PAGE *
form top_of_page.
data: l_i_detailheader type slis_t_listheader.
To get the header for ALV
perform detail_header changing l_i_detailheader.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = l_i_detailheader.
endform. "top_of_page
form detail_header changing fp_i_detailheader type slis_t_listheader.
data: l_wa_header type slis_listheader,
l_v_time type slis_edit_mask,
l_v_date type slis_edit_mask,
l_v_abkrs type char5,
l_v_pabrj type char8,
l_v_pagno type char10.
Local Constants
constants: l_c_h type char1 value 'H',
l_c_1 type i value '1',
l_c_edit type char10 value '__.__.____',
l_c_slash type c value '/'. " constant for slash
To display the report Header
l_wa_header-typ = l_c_h.
WRITE sy-repid TO l_wa_header-info LEFT-JUSTIFIED.
write text-014 to l_wa_header-info left-justified.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To display the Page no
l_v_pagno = sy-pagno + l_c_1.
l_wa_header-typ = c_s.
l_wa_header-key = text-008. " Page No:
l_wa_header-info = l_v_pagno.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To Display the User ID
l_wa_header-typ = c_s.
l_wa_header-key = text-009. " User ID
l_wa_header-info = sy-uname.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To Display the Date/Time
l_wa_header-typ = c_s.
l_wa_header-key = text-010. " Date/Time:
l_v_time = sy-uzeit.
l_v_date = sy-datum.
write: sy-uzeit to l_v_time.
write sy-datum to l_v_date using edit mask l_c_edit.
concatenate l_v_date
l_c_slash
l_v_time into l_wa_header-info+0(25) separated by space.
append l_wa_header to fp_i_detailheader.
clear: l_wa_header, l_v_date.
To Display the Report Description
l_wa_header-typ = c_s.
l_wa_header-key = text-011. " Report Description
l_wa_header-info = text-012.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
append l_wa_header to fp_i_detailheader.
endform. " detail_header
I will be greatful if any one can please help me in removing me the dump.
REGARDS
LATHA. -
Full text not getting displayed while using RSRT
Hi,
I am facing issue while downloading data using RSRT in BI system.
When I go to RSRT and execute a report the output doesn't display full text for a characteristic. i.e. the characteristic has a size of 60 characters, but only 30 chars ( approx) are being displayed as report output in RSRT.
COuld anyone here please help me in getting the full text using RSRT transaction?
I am not using Bex here for the reason that the output has more than 1.8 lac records and hence I get an error while using Bex
WHen I try to execute this report using Bex for a small selection I could see full text there.
And there is no text master data maintained for this characteristic.
Thanks in advance for your replies.Hi,
As you said you have 1.8 Lac records, There is no point in increasing the size to maximum number possible i.e 65K .
You have following three options to satisfy your requirement.:
1. Usage of web reporting for export of more than 65k rows. According the note: 1127156 - Safety belt: Result set is too large, in BW version 7.x it I possible to set parameters that would allow such a massive export of data.
2. Functionality of OpenHubs. Data can be placed directly into the files (e.g. in CSV format) on application server. Be careful here OpenHubs are specially licensed and by using it there are additional fees.
3. Coding of custom ABAP report which runs BW query and gets all its output and saves it in the flat files.
Please let me know if this info is helpful.
Regards,
Krishna Tangudu
Maybe you are looking for
-
Failed to install the new kernel pkg
I just downloaded a new kernel pkg from archlive-pkg this is the new kernel pkg I downloaded. kernel26-snapshot-2.6.31-rc6-git6-i686.pkg.tar.gz when I ran pacman -U kernel26-snapshot-2.6.31-rc6-git6-i686.pkg.tar.gz , it complaint there is a conflict
-
[ Solved ] Firefox profile cannot be loaded .
After a few weeks of not updating , ( I was off line ), I updated and Firefox displays the following message ; " Your profile cannot be loaded . It may be missing or inaccesible. " In ' Home ' I have .mozilla-backup and under properties - owne
-
What is the include for text variable?
Dear Friends I am trying to add a customer exit for text variables. I have done variable exits for things like fiscal period but not for customer exit TEXT variables. I could not find any text variable code in the include ZXRSRU01 . Please advise wh
-
Is there anyway I can get rid of voice delay in AIM video chat?
I can't stand hearing my own voice on AIM. This is via headphones or speakers. How do I get rid of this?
-
I cannot access itunes store from PC but can from iPad?
Does anyone have any ideas? Since upgrading PC to v 11.1.2.31, (and perhaps phone/iPad to ios 7.0.3??), although I can access iTunes I cannot access iTunes Store via my PC to sign in. I keep getting the message to the effect "iTunes Store is busy.