Full text not getting displayed while using RSRT

Hi,
I am facing issue while downloading data using RSRT in BI system.
When I go to RSRT and execute a report the output doesn't display full text for a characteristic. i.e. the characteristic has a size of 60 characters, but only 30 chars ( approx) are being displayed as report output in RSRT.
COuld anyone here please help me in getting the full text using RSRT transaction?
I am not using Bex here for the reason that the output has more than 1.8 lac records and hence I get an error while using Bex
WHen I try to execute this report using Bex for a small selection I could see full text there.
And there is no text master data maintained for this characteristic.
Thanks in advance for your replies.

Hi,
As you said you have 1.8 Lac records, There is no point in increasing the size to maximum number possible i.e 65K .
You have following three options to satisfy your requirement.:
1.    Usage of web reporting for export of more than 65k rows. According the note: 1127156 - Safety belt: Result set is too large, in BW version 7.x it I possible to set parameters that would allow such a massive export of data.
2.    Functionality of OpenHubs. Data can be placed directly into the files (e.g. in CSV format) on application server. Be careful here OpenHubs are specially licensed and by using it there are additional fees.
3.    Coding of custom ABAP report which runs BW query and gets all its output and saves it in the flat files.
Please let me know if this info is helpful.
Regards,
Krishna Tangudu

Similar Messages

Profit center text not getting displayed in report

Hi all
Iam using 0profit_ctr in my query.But in report the text associated with it is not getting displayed.When i see the masterdata the text is displayed properly.
Please let me know how to rectify this.
Thanks
Bhanu

Right click on the master object, and click "Activate Master Data"
Hope this will resolve the issue.
Ishdeep.

Text not getting displayed in PA40 action.

Hello All,
We upgraded from 4.6 to 5.0. When I doing the hiring or any other action, the text for the action type, reason for action or any other field is not getting displayed. Even when I select the entries the text for that is not getting displayed.
like its displaying only 01- for Action type hiring.
Thank You all in advance for your reponse!
Chakri.

Hello Sharath,
I checked this and this table is having all the values properly maintained. Language, Action, Name of the action is maintained. Is there any place where we need to activate this in order for us to see the name of the action type also when we select an action in PA40.
Thanks a lot for your response.
Chakri.

Values having html tags not getting populated while using AJAX in APEX

Hi,
I am using AJAX to populate certain values in a tabular report.
I have a java script of this form (I have taken this example from Denes's example http://apex.oracle.com/pls/otn/f?p=31517:241:1400877312570049)
<script language="JavaScript" type="text/javascript">
function f_set_multi_items_tabular(pValue, pRow){
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=Set_Multi_Items_Tabular',0);
if(pValue){
get.add('TEMPORARY_APPLICATION_ITEM',pValue)
get.add('T_ROWNUM',pRow)
}else{
get.add('TEMPORARY_APPLICATION_ITEM','null')
gReturn = get.get('XML');
if(gReturn){
var l_Count = gReturn.getElementsByTagName("item").length;
for(var i = 0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("item");
var l_ID = l_Opt_Xml.getAttribute('id');
var l_El = html_GetElement(l_ID);
if(l_Opt_Xml.firstChild){
var l_Value = l_Opt_Xml.firstChild.nodeValue;
}else{
var l_Value = '';
if(l_El){
if(l_El.tagName == 'INPUT'){
l_El.value = l_Value;
}else if(l_El.tagName == 'SPAN' && l_El.className == 'grabber'){
l_El.parentNode.innerHTML = l_Value;
l_El.parentNode.id = l_ID;
}else{
l_El.innerHTML = l_Value;
get = null;
</script>
And I have the application process as follows
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<body>');
HTP.prn ('<desc>this xml genericly sets multiple items</desc>');
HTP.prn ('<item id="f05_000' || :T_ROWNUM || '">' || :TEMPORARY_APPLICATION_ITEM || '</item>');
HTP.prn ('</body>');
END;
If I have :TEMPORARY_APPLICATION_ITEM as 'Vikas' it gets displayed properly but if I have '<b>Vikas<b>' it shows null. if it has any HTML tags function l_Opt_Xml.firstChild.nodeValue is not working properly .Please tell me what modiifcation can I use in function l_Opt_Xml.firstChild.nodeValue to get Values with HTML tags also to get displayed.
Thanks,
Vikas

Vikas,
Try escaping special characters: htf.escape_sc(:TEMPORARY_APPLICATION_ITEM)Regards,
Dan

Custom field's text not getting displayed in standard report

Hi All,
I have a requirement like this .
There is a Custom field which we have added in a standard FICO report ie S_PL0_86000030 ( G/L Account - Balances ).
The custom field is added through a report painter , while seeing the config of report painter the custom field is showing the selection text , but when we run this transaction S_PL0_86000030 , the technical name of that field appears in the selection screen .
For example if the field is ' matnr' then we give the text as 'Material Number' . Then in the screen this field is getting displayed as Matnr instead of Material Number.
Please suggest me on this.
Thanks,
Sumit

In transaction GRR2
Insert->
selection parameters ->
take the variable type as >Tesxt varaible for selection parameter
chosse >material no.
hope ths helps
Bhanu

Subtitles are not getting displayed while playing movies

Hi,
Recently I have upgraded with Max OS X 10.6 Snow Leopard. After this upgrade whenever I play movies in my VLC player, I am getting a message as "freetype: failed to load font file /System/Library/Fonts/LucidaGrande.dfont" and then the subtitles are not displayed.
Can someone advise how to resolve it? I tried to download LucidaGrande.dfont from internet. But I couldnt find one. Please help.
Thanks.
Ravi

Hello, Ravi & welcome to the forums.
Lucida Grande is included with Mac OS X.
Check and validate all of your fonts with Apple's Font Book (look in the Applications folder). Search for Lucida Grande to be sure it was properly installed. Find and remove duplicates as well.
Also, don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come from Office 2008, including those related to an Equation Editor installation.
Finally, be sure all the apps you are using are compatible with SnowLeopard. Check with their authors for updates.

Session Timeout Alert text is not getting displayed on web ui.

Hello,
In "Session Timeout Alert" pop up we are facing one issue. The pop up is getting displayed as per the value in rdisp/plugin_auto_logout parameter i.e. 1800. But the text is not getting displayed.
I have implemented the SAP Note 1877120 also. Any inputs to resolve this issue.
Thanks.

Hi Sigrid,
When we do pre activities related to OTR, need to save it in standard name space only ? could you guide me pls.
in the below we have Alias and package are standard.
1.) There are 4 texts which needs to be configured via SOTR_EDIT to get the translation according your languages implemented in your CRM.
a.) Start doing it by opening transaction SOTR_EDIT.
b.) Change to the language you would like to use.
c.) As ALIAS enter first CRM_IC_CMP_FRAME/SESSION_PING_TITLE. Click on Create and confirm the following dialogues.
d.) Enter CRM_IC_CMP_FRAME as package and the object type as WAPP.
e.) Finally enter the translation according your language from the english version (length of text: 25):
"Session Timeout Alert !"
f.) Save you changes
Repeat the steps a.) to f.) with the following aliases and options:
Jimmi

Header Vendor text is not getting displayed for PO in BBP_PD transaction.

Hi Experts,
We are upgrading SRM 3.0 to SRM 7.0 .In the upgraded sys the Header Text 'HTXT' is not getting displayed for the Purchase order created in BBP_PD. For the SCs the Header text field is populated correctly.
Inputs on this will be very helpful.
Regards,
Ravi.K

Ravi,
Check in IMG if the text schema is used in configuring PO transaction type. Define Transaction Types is the setting.
SG

Images for tabs are not getting displayed in the page if Iam using a template

I have page with a unstructured template. I have arranged tabs on page with images attached. But images are not getting displayed. why

Hi,
Please check if the images are in the server and in the /images alias path.
thanks,
Sharmila

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

BOM is not getting displayed in case of centralized planning plant.

Dear All,
there are 2 plants for which we have centralized planning. the users have created Equipment BOM for the two plants. but in case of the second plant for which the planning plant is different from the maintenance plant, the BOM is not getting displayed in the Maintenance Order (i.e. in the components tab).
kindly through some light on it. whether i have to do some settings for it.
Regards,
Ritesh Kapoor

Hi,
Yes while using IH01, i have ticked the BOM explosion option, but when i am giving the plant there then only it is displaying the BOM of that equipment.
Also when i am creating an order for the same equipment, then it does not displays the BOm & shows the message which i have written in my previous mail.
Ritesh

Condition type freight is not getting displayed in print preview

Hi,
I created PO, and while seeing its print preview:
Condition type freight is not getting displayed.
Where i missed?
Uts

hi,
Inddition to M/08...(As given above)...
Also do check the smart form or SAP script...used for the output...check it with the ABAPer...whether the field is liable for o/p or not??
Smart form is attached at message type of message determination..
Regards
Priyanka.P

WRITE STATEMENT IS GETTING EXECUTED BUT NOT GETTING DISPLAYED

HII All,
i hv created a selection screen with push button. Now when i m clicking that pushbutton, output is not getting displayed..when i debug program ,control enters in switch case and also executes write statement but write statement is not getting displayed.. below is the code ..
SELECTION-SCREEN BEGIN OF BLOCK INPUT WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN PUSHBUTTON 10(20) TEXT-002 USER-COMMAND FIR.
SELECTION-SCREEN PUSHBUTTON 35(20) TEXT-003 USER-COMMAND SECOND.
SELECTION-SCREEN END OF BLOCK INPUT.
       WA-EMP_NO = 123.
        WA-EMP_CO = 'A'.
        WA-EMP_N = 'APOORV'.
        APPEND WA TO IT_TAB.
AT SELECTION-SCREEN.
CASE SY-UCOMM.
WHEN 'FIR'.
PERFORM SUB1.
WHEN 'SECOND'.
        APPEND LINES OF IT_TAB FROM 2 TO 3 TO IT_TAB1.
        WRITE:/ 'SECOND INTERNAL TABLE CONTENTS'.
        LOOP AT IT_TAB1 INTO WA1.
        WRITE:/15 SY-TABIX, WA1-EMP_NO NO-ZERO, WA1-EMP_CO, WA1-EMP_N.
        ENDLOOP.
ENDCASE.
FORM SUB1.
LOOP AT IT_TAB INTO WA.
          WRITE:/ SY-TABIX, WA-EMP_NO NO-ZERO, WA-EMP_CO, WA-EMP_N.
ENDLOOP.
ENDFORM.
Plz help me..
Edited by: Julius Bussche on Jan 29, 2009 1:40 PM
Code tags added and please dont use Caps-Lock.

HI,
SELECTION-SCREEN BEGIN OF BLOCK INPUT WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN PUSHBUTTON 10(20) TEXT-002 USER-COMMAND FIR.
SELECTION-SCREEN PUSHBUTTON 35(20) TEXT-003 USER-COMMAND SECOND.
SELECTION-SCREEN END OF BLOCK INPUT.
WA-EMP_NO = 123.
WA-EMP_CO = 'A'.
WA-EMP_N = 'APOORV'.
APPEND WA TO IT_TAB.
* AT SELECTION-SCREEN.                 "Comment this
START-OF_SELECTION.                     " Add this
CASE SY-UCOMM.
WHEN 'FIR'.
PERFORM SUB1.
WHEN 'SECOND'.
APPEND LINES OF IT_TAB FROM 2 TO 3 TO IT_TAB1.
WRITE:/ 'SECOND INTERNAL TABLE CONTENTS'.
LOOP AT IT_TAB1 INTO WA1.
WRITE:/15 SY-TABIX, WA1-EMP_NO NO-ZERO, WA1-EMP_CO, WA1-EMP_N.
ENDLOOP.
ENDCASE.
FORM SUB1.
LOOP AT IT_TAB INTO WA.
WRITE:/ SY-TABIX, WA-EMP_NO NO-ZERO, WA-EMP_CO, WA-EMP_N.
ENDLOOP.
ENDFORM.

Values are not getting displayed in screen

Hi Experts,
I have used BAPI_CHARACT_CREATE to upload characteristics(t-code: ct04),
All data are uploaded into the Master Table, while changing the same in t-code ct04 the Value and Description is not getting displayed in screen( in Table control).
NOTE: If i use BAPI_CHARACT_GETDETAIL to get the details of a character i am getting all the values which i have uploaded. (But not in the t-code ct04).
BDC and LSMW is not working for this t-code.
Please help me out.
Thanks and Regards,
LOGU

Hi,
i think you have not released the objects to repository. test and try again..
thanks
karthik

Write Statements are not getting Displayed

Hi All,
We are going for Upgrade from 4.7 to ECC. So, in my program we have few write statements which are not getting displayed in the output. Those write statments are seen as errors in the extended check as Char. strings w/o text elements will not be translated: 'Income Tax Worksheet'.
Could any one please help me to over come this errors and Display the wite statements.
Thanks
Shashikanth

Have you mapped the checked and unchecked glyphs to be used?
Check the doc and blog for check boxes.
Regards
tim

Full text not getting displayed while using RSRT

Similar Messages

Maybe you are looking for