Getting error message after creating project ess~org from ESS track

Hi All,
Our basis team just now implemented the track for ESS and MSS.So we need to sync all application from DTR.
We are facing problem with one Dc essOrg.I have created project essOrg from ESS track in inactive DC of development configuration.Build of DC is successful,where as in the Task tab its showing below error message:
" Tree TreeCont [dataSource]: Context element and property are not compatible Orgchart.wdview     NWI_HR1_Dessorg~sap.com/src/packages/com/sap/xss/hr/org/chart  "
I have done the follwing steps :
1.I have close the project.Then remove it from client.Then close the NWDs and reopen it.Still the same error we are getting after creatig project from the track.
2.Even we tried to repair the DC.Its asking for check out.Then after creating activity its showing an error pop up message "org.eclipse.jdt.core.JavaModelException: Classpath contains duplicate entry: D:Documents and settings/susmita.panigrahi/.dtc/2/DCs/sap.com/pcui_gp/xssfpm/_comp/gen/default/public/FloorplanManager/lib/java/sap.compcui_gpxssfpm~FloorplanManager.jar "
3.I have open the OrgChart view of VcOrgChart Component in NWDs.I have found that the data source property of Tree node is showing red cross mark with name OrgTab(name of context node).I have tried to select another node also other than the context node OrgTab , getting message "Select an attribute of Type"
Can any body tell me how to solve the error"Context element and property are not compatible " coming for DC ess~Org?
Thanks
Susmita

If you have created other projects and they are working fine? Standard application should work without any modifications, so you may like to revert all the changes(before they cause further problem).
Well you may like to clean up your directory , unless you have loads of application checked out.. Remove all applications from this particular Track, ensure that everytime you delete project from Studio , select to remove code from directory.
This is likely that you are working on applications from two tracks, where version of FPM component is not the same. I always prefer to work one at a time, and i remove other track if i am done with application(This is lame way of handling it, but i prefer this.. saves loads of time to clean/repair)
Also hope you are using compatible version of Studio.
Rgds

Similar Messages

  • Getting error message "cannot prepare project for publishing (-50) -- and it wont publish my project. What's up?!

    getting error message "cannot prepare project for publishing (-50)" and, subsequently, it won't publish the bloody thing. I have publsihed many videos previous to this one so I have no idea waht is going on.
    So, my question is -- WHAT IS GOING ON?!!

    Hi
    See if this might help
    Error -50
    Error -50   paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Yours Bengt W

  • Imovie 11 on macbook pro get error message cannot save project changes

    imovie 11 on macbook pro get error message cannto save project changes:
    Please check the disk to ensure there is enough free space and you have permission to write projects. iMovie will try to save periodically, but your changes will be lost if you quit iMovie before the problem is resolved.  I have 462 GB disc space available.  I don't know about "permission to write projects".

    OK - bad luck about that. I hope you weren't too far advanced into your project. Sorry to hear that repairing permissions didn't help.
    When working on a long project, it's advisable to duplicate the project from time to time. In Project Library view click on your project then select File>Duplicate Project from iMovie's menu. A number will be appended to the name of the duplicate, otherwise you can rename it. A short-cut is to control-click (or right-click) on the project name, then select Duplicate Project from the pop-up menu. Duplicating doesn't take up much extra space, as the project points to the clips in the Event (or Events) and doesn't contain actual video as such (it's basically a text file which also holds information about your edits, added photos, music, titles and so forth).
    Also, it's best to have a backup, such as Time Machine. It gives you peace of mind when things go wrong!
    John

  • Unknown error message after I click sign in from the app stort

    Hello ,Excuse me if this has already been discussed.
    I have been prompted to download a new version of iphoto after discovered it missing my mac pro
    I get an "Unknown error" message after I click sign in from the app store to download.
    I can't download and I can't find iphoto.
    Have I lost all my I photos is one question I have.
    Thank you

    Your photos should be safe as they are in the Library.
    As to the download issue: contact Mac App Store support. There's a link on the right hand side of the Store Window.

  • Get error message when trying to launch bridge from CC 64 bit.

    Get error message when trying to launch Bridge from Photoshop CC 64 bit.  "Cannot complete command because extension cannot be loaded."  Need fix.  Thanks.

    Hi Adobe Bubba,
    Please uninstall the software, run the cleaner tool, restart your machine and install again.
    Cleaner tool: http://www.adobe.com/support/contact/cscleanertool.html .
    Regards,
    Romt Sinha

  • I cant sync my iphone 5s on windows itunes, keep getting error message unable to load dataclass information from sync services.

    i can not sync my iphone 5s on itunes on windows. keep getting error message "unable to load dataclass information from sync services" when plugging in my phone.
    I have tried uninstalling itunes and re-installing it.
    Turning off firewall and antivirus.
    Has anyone had this before and if so how did you over come this issue?
    Thanks in advance

    Hey troyboi12345,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue, follow this article.
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/ts2690
    Have a nice day,
    Mario

  • Adobe Premier Pro CC 2014 closes with no error message after opening project

    PC Spc:
    OS:Windows 8.1 64-bit
    Processor:Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
    Ram: 2x 4GB  Samsung 1600MHz
    GPU:NVIDIA GeForce GTX 760
    please help

    abradders100 wrote:
    I have a PrPr project on an external GTech drive connected via USB which ran fine on my old MBP in PrPr CC 2014. When I open this project on the new MBP I cannot render or export without getting error message "Video Preview Error; Error Unknown."
    If I'm reading this correctly, it sounds like the project file was created on your previous MBP, and saved to that external USB (hopefully 3.0?) drive.  Is that correct?  Where did you have the media, scratch, etc files located on that previous MBP?  I'm wondering if Pr on the new MBP is tripping over itself trying to find other data that it might need?
    Also when the Warp Stabilizer effect is applied, it generates black lines across the video in the program window. This happens when using either Mercury Playback Open CL and/or Cuda. However if I switch to Mercury Playback Software only, everything is fine but of course much slower. In addition, if I remove the effects from the sequence: Warp Stabilizer and auto colour and levels, the sequence exports fine regardless of whether Mercury Playback Open CL and/or Cuda or Software only.
    What about other accelerated effects?  Can you apply any of them individually without getting black lines in the program window?  Further, have you tried installing the previous version of Pr CC to see if the same issues exist?  You'd have to create a new Pr project, as the 2014 project files aren't backward compatible.  But it might be interesting to see if you're experiencing the same problems with the older Pr.

  • Trying to update frpm itunes 10 to itunes11, but get error message after installation

    I am trying to update my itunes to be compatible with my replaced iphone 4s (apllecare replacement) that is not compatible with my current iTunes 10.6.  I have tried several times to upload th enew version of iTunes to no avial getting an error message after a "successful installation" and the itunes reverts to 10.6.  Since my imac was an older unit I had to update to OSX 10.6.8 (sucessfully) and increase my RAM.  I am 120bucks in the hole plus the 49 dolar surcharge for the iphone replacement and i am still no closer to restoring my phone.  Help please

    First backup your music and content.
    Then delete iTunes 10.6 Drag the application from Finder > Applications to Trash. Empty Trash
    Try and install 10.7 first iPhone 4s will work with this. You can find the download here
    http://support.apple.com/kb/DL1576
    Install it. Does itunes 10.7 now appear? Is your content all there? Connect up your iPhone and start syncing.
    From there if you want to you can upgrade to iTunes 11 but it is only necassary if you have an iPhone 5

  • Get error message after trying all the fixes

    My hp psc 1315 all-in-one worked fine until today..trying to scan a doc got this error message --
    An unexpected error has occurred. Check OK to close program, and then try the following:
    --restart the program
    --restart the PC and then try again
    --reinstall the Photo and Imaging software and try again
    I tried all these - and downloaded new software after uninstall of old.
    Still getting error message -- any suggestions please?
    Thanks in advance.

    Hello golden1, and thanks for the reponse!
    I would suggest following the steps laid out in this document: An Unexpected Internal Error Has Occurred  which is found on http://hpanswers.blogspot.ca.
    Step 1:
    -In C:\Windows folder, look for "Twain_32", which should be there. Also, look for a folder called "Twain32". If this folder exists, it will be empty. Copy and paste the contents of "Twain_32" into "Twain32".
    Step 2:
    - In "Services" (to access Services, Go to Start, then Run. Type services.msc and hit enter. Make sure the service named Remote Procedure Call is Started.
    - Go to Shell Hardware Detection, right click, and select properties.
    - Set the Startup Type as Manual and hit Apply. Then you should be able to Start the service by hitting Start.
    - Try to scan using the software. If you are unable to scan, try uninstalling and reinstalling the printer software.
    Step 3:
    If you if you are using downloaded software instead of the printer CD:
    -Go to the Start menu, and go to Run. Then type %temp% and hit Enter.
    -Locate the correct folder starting with "7z" (the correct folder contains "Util" and "CCC" folders).
    -Open folder "Util".
    - Open folder "CCC".
    - Please run the L3uninstall.bat.
    - When the uninstall has completed, restart the computer.
    - Run Disk cleanup in "System Tools"
    - Download and install the latest version of Adobe flash player: http://get.adobe.com/flashplayer/
    - Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
    - Rename the twain_32 folder "twain_old".
    - Restart computer.
    - Download printer software and reinstall.
    If you are using the printer software disc, follow these steps instead of downloaded software:
    - Go to the Start menu, and go to Computer.
    - Double-click on the icon for the HP printer CD.
    - Open folder "Util".
    - Open folder "CCC".
    - Please run the L3uninstall.bat.
    - When the uninstall has completed, restart the computer.
    - Run Disk cleanup in "System Tools"
    - Download and install the latest version of Adobe flash player: http://get.adobe.com/flashplayer/
    - Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
    - Rename the twain_32 folder "twain_old".
    - Restart computer
    - Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
    - Rename the twain_32 folder "twain_old".
    - Restart computer.
    - Download printer software and reinstall.
    Step  4:
    - Download an updated twain_32.dll file and place it in C:\Windows>twain_32. Replace the new file with the old.
    Step 5:
    - Perform a system restore, if the issue occurred recently. Be sure that you select a restore point dated before the issue occurred.  You can reference this document on how to do a system restore: http://windows.microsoft.com/en-CA/windows7/produc​ts/features/system-restore
    If none of these steps do not resolve the issue, I 2would suggest you re-format the computer.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Getting error after creating project of DC ess~Org  from ESS Track

    Hi All,
    Our basis team just now implemented the track for ESS and MSS.So we need to sync all application from DTR.
    We are facing problem with one Dc essOrg.I have created project essOrg from ESS track in inactive DC of development configuration.Build of DC is successful,where as in the Task tab its showing below error message:
    " Tree TreeCont dataSource: Context element and property are not compatible Orgchart.wdview NWI_HR1_Dessorg~sap.com/src/packages/com/sap/xss/hr/org/chart "
    I have done the follwing steps :
    1.I have close the project.Then remove it from client.Then close the NWDs and reopen it.Still the same error we are getting after creatig project from the track.
    2.Even we tried to repair the DC.Its asking for check out.Then after creating activity its showing an error pop up message "org.eclipse.jdt.core.JavaModelException: Classpath contains duplicate entry: D:Documents and settings/susmita.panigrahi/.dtc/2/DCs/sap.com/pcui_gp/xssfpm/_comp/gen/default/public/FloorplanManager/lib/java/sap.compcui_gpxssfpm~FloorplanManager.jar "
    3.I have open the OrgChart view of VcOrgChart Component in NWDs.I have found that the data source property of Tree node is showing red cross mark with name OrgTab(name of context node).I have tried to select another node also other than the context node OrgTab , getting message "Select an attribute of Type"
    Can any body tell me how to solve the error"Context element and property are not compatible " coming for DC ess~Org?
    Thanks
    Susmita

    Hi,
    after creating the project, dont build it, close the project and close you NWDS then open the NWDS ,open the project and build, it will work ithink,
    i faced the same problem, try this may be it weill work.
    dont remove from client, only close the project.,
    Cheers,
    Apparao

  • Strange error message when creating Project Excel Template, can anyone explain?

    I am getting this error every time I create a Project Excel Template, and I don’t know why, nor do I understand what the error message is trying to tell me. The project is very simple, just a task list with resources assigned, but
    the resources are not assigned any costs or rates, as we don’t use. Any help is appreciated, as I have to explain this. Thx!
    Jigs
    Jiggy Gaton, Trainer and Media Consultant for Nepal and S. Asia

    thx John for your help. I don't think any thing at all is applied... I get the same message if I just create a new blank project and try the export. The resulting output looks fine - it's just the message that worries me. I am on the road training some folks
    in Africa in regards to the beauty of MS Project 2013, and this one is a bit embarrassing. Perhaps it's an OS thing?  The only substantial thing that's changed on my machine is that I went from Windows 8 to 8.1. Hmmm, also installed Visio. Well, thx again!
    jigs
    Jiggy Gaton, Trainer and Media Consultant for Nepal and S. Asia

  • How do I stop getting error messages while creating a NEW iTunes account?

    I'm new to MAC. Have been a PC user for nearly 15 years, so I am learning. Recently tried to login into iTunes. I wanted to start a digital music library as I am YEARS behind in that area. However everytime that I try to 'Create a New Account' on iTunes I get the following message:
    Session Timeout. Your session has timed out. Please try this operation from the beginning.
    I have repeatedly quit iTunes and tried to create a new account. I have downloaded the newest version of iTunes. Re-started my computer. It does not seem to matter what I do, I cannot create an account for myself and I always get the same error message. What should I do to resolve this?
    Thank you,
    sun_teacher

    See the thread here:
    http://discussions.apple.com/thread.jspa?messageID=8622337&tstart=0
    We all had the same problem.

  • Getting Error Message while creating transformations

    While creating transformation for char customer no in the rule type for constant , getting an error message source parameter 0001 is not being used.

    Hello Bharati,
             you need to give the value of the constant by selecting from the source parameter.Hope this answer helps you.
    Assigning Points = Thanks in SDN
    Thanks & Regards
       Jai

  • Help! Still get error message after installing new hard drive

    The original problem is below and thought that it would help to include it to see the initial problem.
    I went out and bought a new hard drive (500gb) and installed it in my laptop.  I went to use the restore disks and I got the same exact error mentioned below.  I used a set of disks that I copied from the original recovery disk and it still did the same.  What is the error code and how can I fix this!!
    Please help!!
    I have a Satellite A215-S7444 laptop and everytime I go to restore the drive to it's factory settings using the Toshiba recovery wizard I get the following error:  ERROR: 03-EEEE-000, AN ERROR HAS OCCURRED, PRESS [OK] TO TURN OFF COMPUTER.
    Just a note, I have used my recovery disks to restore the factory settings before with no problems at all, now I get this message.  All the files are accesible on the CD and I have no virus' on my computer.
    Lastly, the image part of the drive (The one that is like 1.5 gb) which is usually visible is not any more and has not been for a bit when you should see it when you open "My computer".  You can however see it when I go to "Administrative Tools-Computer Management."  It states that the drive is Healthy (EISA Configuration), type is basic, and there is no file system associated with the drive and there is no drive letter for it either.

    Thanks for your quick reply!  I was wondering if anyone would reply!
    I made the copies on a suggetion that the original may be scratched or something so I figured what the heck?  I did format the hard drive though.  It is a Seagate 500gb hard drive.  I only formatted the whole drive and figured that the restore disks would make the additional partition.
    Aside from that, it's the same error message that I had on the original drive.  The original drive and OS works (Vista), but I wanted to restore it because I just wanted to wipe everything and start clean.  What can be causing the error message, and what IS the error message?
    Anymore suggestions or help would be great as I am in desperate need of getting my computer back to working.
    Thanks again for replying!

  • Error message after creating new responsibitiy on new Operating Unit

    Hi All,
    Steps to Reproduce:
    1- Add new Legal entity
    2- Adding new operating unit from (define organization) with the organization classifications :
    a. HR Organization
    b. Operating Unit
    c. Company Cost Center
    3- Run the request “Replicate Seed Data”
    4- Adding the new Operating Unit in company all Operating units security profile
    5- Adding the security profile for the new Operating unit
    6- run the request "Security List Maintenance” for “, ALL_PROFILES, , , ALL, , ,”
    7- Create new responsibility
    8- In profile option at the responsibility level add the operating unit and the security profile for the new responsibility
    9- Add the new responsibility to an existing user
    10- the Error "AP_FINAP_NOT_DEFINED" appearing when try to open any form
    thanks in advance,

    From Oracle Support:
    *R12: APXINWKB : Unable to Create New Invoices due to AP_FINAP_NOT_DEFINED for Security Group [ID 1092873.1]*
    Run the HR concurrent program Security List Maintenance after creating a new Security Profile.
    Be sure that the parameter "Generate List For" is set to "All security profiles".

Maybe you are looking for