Getting Error There is no C compiler on your system--

Hello all,
Upon trying to install Xastir-1.9.8 and fink-0.29.10 on my Mac Book Pro 3.06 GHz Intel Core 2 Duo /4 GB 1067 MHz DDR3 version 10.6.2 I keep getting the error message "There is no C compiler on your system. Make sure that the Developer Tools are installed".. Now I'm 100% sure I have both X11 as well as Xcode version3.2.1 64 bit, installed on my system. What could be causing this error? Could it perhaps mean that the software I am trying to install doesn't support this version of Leopard yet. Any help would be greatly appreciated.
Best Regards,
freesparks

freesparks wrote:
<code>export PATH="/Developer/usr/bin:${PATH}"
export MANPATH="/Developer/usr/share/man:${MANPATH}"<code>
First, of all, when posting code here in Apple Discussions, always put it between two lines of:
Since you have multiple versions of Xcode installed, you have no choice about your Xcode path. It must look like this:
export PATH="`/usr/bin/xcode-select -print-path`/usr/bin:${PATH}"
export MANPATH="`/usr/bin/xcode-select -print-path`/usr/share/man:${MANPATH}
and then you use "xcode-select -switch <xcodefolderpath>" to pick which Xcode you want to use from the command line.
I did this first and am still ending up with the error:
checking for Motif headers... configure: error: ** NO MOTIF HEADERS FOUND ** install Motif development headers or use --with-motif-includes to specify location of Xm/Xm.h
NEVSLAVE:xastir-1.9.8 neduret$
That sounds pretty self-explanatory. You need to install Motif development headers for whatever you are trying to build. You were trying to build Xastir, weren't you? Did you try to download a binary installer?

Similar Messages

Main optimizer error - There is already a transaction for the system

Hi Guru's,
I am trying to download support packs from maintenance optimizer in solution manager system. When i select the logical system it gives the error
'There is already a transaction for the system of this product version'
After this error, it does not proceed further.
There is many maintanence transactions in Maintanence optimizer. Now how to remove all these.
Any ideas or solutions most welcome.
Moses

As Christian has already written, the only problem is that there is already an open Maintenance Transaction for that specific system. Maintenance Optimizer checks that you do not open two different Maintenance Transactions for a system at the same time.
You only have to withdraw the old Maintenance Transaction to be able to proceed with the new one. Open the old Maintenance Transaction and click "Withdraw" on the bottom of the page. If it is grayed out, you need to go one step backwards, there you can withdraw it.
Best regards,
Joachim

Getting error when trying to create Exchange Connector in System Center Service Manager 2012

Getting error when trying to create Exchange Connector in System Center Service Manager 2012
The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
Warm Regards, Pramod Kumar Singh Manager-IT

Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
Also, your question is related to SCSM, please post at SCSM forum if you have further question.
Juke Chou
TechNet Community Support

I am getting error "Office for Mac has determined that your product key is not valid." when opening xlsx doc.Till yesterday i was not geting this error

i am getting error "Office for Mac has determined that your product key is not valid." when opening xlsx doc.Till yesterday i was not geting this error and was working perfectly fine with my sheet.

Could be some Disk Corruption, but...
http://support.microsoft.com/kb/969064

TS2446 Error:there is a billing problem with your previous purchase please check your billing information.i have checked all my information and all the things are wright

Error::There is a billing problem with your previous purchase please check your billing information

Ask for assistance:
Contact Apple Support
https://getsupport.apple.com/GetproductgroupList.action

HT2731 Can not open Itunes on my computer,i get error msg MSVCR80.dill is missing from your computer . What do i do?

Can not open itunes on my computer,I get error msg MSVCR80.dill is missing from your machine. What do I do?

Work through the user tip: https://discussions.apple.com/docs/DOC-6562

Error while using XML Iview, please contact your system administrator.

Hello everybody,
I have already posted a detailed message for the XML iview problem sometime back but havent got any reply so far. All the replies had come from users who are also facing the same problem. I am trying to use a XML iview for fetching RSS feeds from one of the internet source, i have entered the proper URL and selected the proper RSS to XHTMLB transformer also and have entered the proxy settings in the http service and enabled it and restarted it also, but again when i am previewing the Iview its giving me the error <b>"Error while using XML Iview, please contact your system administrator."</b>. I am using
    Area           Version
    J2EE Engine    6.40 PatchLevel 98256.313
    Portal         6.0.14.0.0
, can someone tell me whether its a bug in sp14 or i am missing something while creating this XML Iview. Expecting a proper reply.
Thanks in advance,
Regards,
Sarabjeet.

Hi Sarabjeet,
The XML iView uses server-side fetching, so if you are having problems with a regular URL iView in server-side fetching mode, so the problem with the XML iVIew probably has to do with the proxy settings.
And since you got a 407 error, it seems there is an issue with proxy settings or the proxy server, as mentioned in this description of 407 error:
The HTTP 407 code only applies to users who are accessing the Internet behind a proxy server. This is common in government and corporate workplaces. The 407 code indicates that your computer must first authenticate itself with your company's proxy server. Check with your IT department or computer support group as to the exact reason why you may be getting this error. It may be possible that the proxy server does not allow downloads of specific files (exe, cab, com). You can also verify that your proxy server settings are valid.
I will check if I can find out any more specific info.
Daniel

"There are no Loops Installed on your System." Missing Loops?

Hi everyone. I just purchased my very first Mac today and so far the experience has been great with the exception of two things. One of the things being that I don't seem to have loops on my Mac for GarageBand. When I open the Loop Browser, it simply says "There are no loops installed on your system," and gives me an empty loop browser. Did I miss something? Was I supposed to install the loops off of a disc or something? I would've assumed that the loops would've already been on my Mac, but please inform me if this is not true. Also, I still have all the discs that I got with my Mac since I just got it earlier today, so if anyone knows what discs the loops are on or any other way to get GarageBand Loops, please let me know. I'd appreciate your help very much. Thanks.
Black MacBook 1GB RAM, 2.16GHz Intel Core 2 Duo, 160GB Hard drive Mac OS X (10.4.9)

Good.
Do a search for this folder: "Apple Loops Index".
There will likely be more than one, although only one folder probably has all your Indexed Loops.
So, when you find the one with the "Search Index..." files, delete them.
Then, open a project in GarageBand, open the Loops Browser, and drag that Loops folder onto the Loops Browser.
Wait for it to index them, and you should be good to go.
Good luck,
WH [:c)~

Error - Delivery date not set. Notify your system administrator - TcodeKKS1

Hi,
While using Tcode - KKS1 we are getting the Error - "Delivery date not set. Notify your system administrator" for two Production orders. I have checked all the date fields in Production order. What could be the reason for this.
Timely help will be highly appreciated.
Thanks is advance
Narayanan

Hi,
check SAPNET note 83914 and related notes.
best regards, Christian

Error Messge: Final Cut Pro requires that your system have a CPU type of G5

I recently updated my OS to 10.5.8. I also downloaded AVID codec for quicktime. Then, when I went to open FCP on my MacBook Pro (2.6GHz Intel Core 2 Duo), I was hit with the error message Final Cut Pro requires that your system have a CPU type G5; this system has a CPU type of G4. I've never had a problem running FCP on this laptop. Any suggestions? Help!

Also, I found another person who posted with a similar problem and here's what he wrote, (but curiously, he doesn't state what the fix was to his problem).
After 1 and a half hours of support from Ireland it came out that some llibrary setting
was conflicting with the startup of FCP. Apple did not hear of this problem before. I wonder
how many macbookpro users have the same issue...
mac book pro 17" Mac OS X (10.5.7)

Provide steps to send Root CA certificate to the Lync client, getting error" There was a problem verifying certificate from the server"

Hi,
I Build an Lync 2013 set up with FEpool, Director pool and Exchange server is integrated. I have windows 8 client machine, with Lync client installed. When I try to login to the lync client, I am getting error like"There was a problem verifying
certificate from the server".
When I installed ROOT CA cert manually on client machine I am able to login to the lync client. similarly if I add my client machine in my domain, I am able to login to the Lync client.
Now is there any other way to send the certificate automatically to the client machine (Which are NOT part of the DOMAIN) from the server, instead of manual installation process.
Please help me troubleshoot this problem

Agree with S Guna, there is no easy way to push a certificate automatically to a client that you don't control other than building an installer package and asking them to run it. In this situation, if there are a lot of non-domain joined machines
a third party certificate is the way you need to go.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Getting error : There is an error while getting plan id.

Hi,
While opening plan I am getting this error:
‘There is an error while getting plan id. No Free partitions available. Contact DBA to create partitions.’
Can anyone help me here?

Have a look at the following note, it could be relevant to the issue:
Note: 313642.1 - Create Aps Partitions Fails With Ora-2149 Ora-6512 Ora-14501
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=313642.1

Getting error for classpath setting during compilation

Hi,
I tried sampel code of SchematronValidation bpel sample code from oracle site.But while compiling the code,I am getting following error:
Failed to compile bpel generated classes.
failure to compile the generated BPEL classes for BPEL process "SchematronValdiationProcess" of composite "default/SchematronValidation!1.0"
The class path setting is incorrect.
Ensure that the class path is set correctly. If this happens on the server side, verify that the custom classes or jars which this BPEL process is depending on are deployed correctly. Also verify that the run time is using the same release/version.
Plz help me on this to resolve!!!
Regards,
Deb
Edited by: DevD on Jun 30, 2011 2:40 PM

Hi Yatan,
Thanks for your inputs.
I have added BPM-Workflow class file in project properties.Now SOA-BUILD successful,but while deploying to server I am getting error:
Error during deployment: Deployment Failed: Error occurred during deployment of component: SchematronValdiationProcess to service engine: implementation.bpel, for composite: SchematronValidation: ORABPEL-01005
Failed to compile bpel generated classes.
failure to compile the generated BPEL classes for BPEL process "SchematronValdiationProcess" of composite "default/SchematronValidation!1.0*soa_1272dcc8-82cf-4306-b31f-7aacd0be61cb"
The class path setting is incorrect.
Ensure that the class path is set correctly. If this happens on the server side, verify that the custom classes or jars which this BPEL process is depending on are deployed correctly. Also verify that the run time is using the same release/version.
[05:10:15 PM] Check server log for more details.
[05:10:15 PM] Error deploying archive sca_SchematronValidation_rev1.0.jar to partition "default" on server soa_server1 [10.185.51.136:8001]
[05:10:15 PM] #### Deployment incomplete. ####
[05:10:15 PM] Error deploying archive file:/C:/JDeveloper/mywork/GM_POC/SchematronValidation/deploy/sca_SchematronValidation_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
Plese help me on this!
Regards,
Deb

Photoshop CS4 - getting error message that states: Could not complete your request because of a program error. Getting this message when

Could not complete your request because of a program error. Getting error message every time I open the program and try to do anything. Have to Force Quit to close. Using a Mac. Your expertise is appreciated!!

Have you tried removing all 3rd party plug-ins?
Also, resetting preferences to defaults may help... Press and hold Command - Shift - Option immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be really quick - it will prompt you to confirm deletion of your current preferences, which will lead to the establishment of a fresh default set. If it does not prompt you, you haven't been quick enough to get the keys down.
-Noel

Getting error in sso from ep to r/3 system

Hi,
I configured SSO from EP to R/3 system.When iam checking SSO through System Administration-Support- SAP Application--
SAP system by alias in the drop list menu.
Enter a transaction in the Transaction code field.
Choose the Go button--then it open the r/3 gui and in below iam getting error name or password incorrect(repeat logon),guide me for the same.
Thanku

Chinnu,
The Password for the user id that you are using to connect to Backend System might have been changed or the User ID has been Locked.
You need to change the user's password in the backend system or unlock the user and try to use the correct password to connect to backend using SSO.
Check out this:
[Configuring SSO with User ID and Password to SAP Systems |http://help.sap.com/saphelp_nw70/helpdata/EN/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm]
Regards,
Karthick Eswaran

Getting Error There is no C compiler on your system--

Similar Messages

Maybe you are looking for