Getting error when installing addons on production

Hi all,
I have created addons setups using "sapb1addon installer.NET wizard"  when i intalled its,
on development server its working fine same thing when i am trying to install on production server i am getting below error msg plz solve it as soon as possible
"Error:access to the path 'c:program Files(x86)\sap\sap business one\addons\laur\"
Regard,
sri

Hi,
If you have development system 32 bit and production system 64 bit and you are getting problem in addon running then open your project>solution explorer>right click on project>properties>go to compile tab>click on advanced compile option>in target CPU dropdown select x64 instead of x86/Any CPU
now debug your code and make your installer in same CPU mode and check your addon files on production server.
if your question is answered then close the thread
Regards,
Bhavank

Similar Messages

  • Get error when installing .json back up file A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script

    get error when installing .json back up file A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script
    Also tried to chang places.sql or what ever to my back up .json file and that wouldnt work. Is there a way to just move my backup .json file some where my bookmarks are a bigger file and i t will take a bit to upload.

    A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script in the debugger, or let the script continue.
    Script: chrome://browser/content/places/editBookmarkOverlay.js:909

  • Getting error when installing CR XI R2 Service Pack 5

    I am getting an error when installing CR XI R2 SP5 (cabinet file m148.cab missing or corrupt). I am downloading it from the Downloads section of the SAP Community Network.
    Does anyone know where I can get another copy of this service pack?

    Hi
    If you are using Windows 2000 SP4 then install the "Update Rollup 1 for Windows 2000 SP4 (KB891861)" should resolve the error message for missing cabinet file when installing SP4 on Windows 2000, as stated in Release Notes of SP4.
    Below is the link to download the Update Rollup 1 for Windows 2000 SP4 (KB891861):
    http://www.microsoft.com/downloads/details.aspx?FamilyID=B54730CF-8850-4531-B52B-BF28B324C662&displaylang=en  and http://support.microsoft.com/?kbid=891861
    Then install SP5 for Crystal Report XI R2.
    Hope this helps!!
    Regards
    Sourashree

  • Getting ERROR when installing ORE - "ERROR: a later version of ORE session is already installed"

    I am trying to install ORE server version in my Windows 7 OS laptop. I am getting the above error. I had previously installed ORE once. But had to to redo everything because I had installed R12 version of database.
    After installing the correct version of the database, I am getting this error when trying to install ORE.
    I checked the list of installed products and am not able to find anything. Any suggestions would be greatly appreciated!
    Regards,
    Santhosh Jose

    Santhosh Jose,
    This error indicates a newer version of Oracle R Enterprise is already installed. Try first uninstalling ORE server using the uninstall.bat script that corresponds to the existing version.  Then reinstall ORE using the install.bat script.
    Sherry

  • C++ Runtime Error when installing addons

    Hi everyone,
    I get this error when trying to install or start any addon: Microsoft Visual C++ Runtime Library. Runtime Error! Program: C:\Program Files\SAP\SAP Business One\SAP Business One.exe.  Abnormal program termination. And SAP Business One quits.
    I've already reinstalled SQL Server, DotNet framwork 1.1 and 2.0, and SAP business One. Tried to start with anti-virus disabled, but error persisted.
    This error appears on a windows 2003 server, and on all workstations within the domain.
    I am totally out of options left to get this fixed. Anyone has a clue for me?
    Thanks,
    Andy

    Refer: SAP Note Number 819501 that explains How to clean client after corrupt installation of add-on(s)
    Read the note and understand whether any of the symptoms are mathcing with your problem, If Yes, follow the instructions as per the note.
    Along with the  above, Try this thread and guidelines - Microsoft C++ Run Time Error (This thread is not yet marked as answered)
    Re: Microsoft C++ Run Time Error
    If the thread helps you Thanks to Lucas and Tim.
    Extract from the thread,
    >> refer to note#808354, https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000808354
    >> In addition to Lucas suggestion, there is another SAP Note 852031 following above Note 808354. Try the suggested work around in this Note only after going over Note 808354. The work around is good for cases where more than one UI versions ar registered at the same time.
    >> https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000852031
    Good Luck
    Regards
    Satish

  • Get error when install Lync 2013

    Hello,
    I get these errors when try to steup or Remove Lync Server Components:
    An error occurred while applying SQL script for the feature RtcDatabaseStore
    An error occurred while applying SQL script for the feature LyssStore
    Database 'lyss' exists but not accessible. It must be repaired manually or dropped and a new one created. if you want to preserve data, you must use this product's backup/export restore/import solution. Examine the product documentation for instructions.
    please help, thanks!
    stmart

    Yes other is up.
    I install this server get the error when try to create CSDatabase:
    this is the error log:
    RtcDyn db state is: DbState_NotAccessible
    Dyn Data Path = D:\CsData\RtcDatabaseStore\rtclocal\DynDbPath, Dyn Log Path = D:\CsData\RtcDatabaseStore\rtclocal\DynLogPath.
    Creating database rtcdyn from scratch. Data File Path = D:\CsData\RtcDatabaseStore\rtclocal\DynDbPath, Log File Path= D:\CsData\RtcDatabaseStore\rtclocal\DynLogPath.
    Setting the database rtcdyn to single user mode.
    Failed to drop database. Alter failed for Database 'rtcdyn'. .
    Setting the database rtcdyn to multi user mode.
    Unable to open the physical file "D:\CsData\RtcDatabaseStore\rtclocal\DynDbPath\rtcdyn.mdf". Operating system error 3: "3(The system cannot find the path specified.)".
    Could not restart database "rtcdyn". Reverting to the previous status.
    ALTER DATABASE statement failed.
    File activation failure. The physical file name "D:\CsData\RtcDatabaseStore\rtclocal\DynLogPath\rtcdyn.ldf" may be incorrect.

  • Getting error when installing on my iMac

    Aaaaarrrrr. I'm ready to throw my mac out the window.
    Here's what I have: iMac 1.25 GHz PPC G4 w/ 512 MB. I am running on OS X 10.2.8. I am trying to install my full retail version of Tiger; however, when I run the installation I get the message "Unable to install. Please try installation again"
    This is what I'm getting in my log:
    -Verify/Repair failed with error -9972 (The underlying task reported failure on exit)
    -Install failed: Target volume is damaged and cannot be repaired by the Installer.
    I have run and verified my disk permissions and have all of my updates installed. Nothing seems to be helping. Suggestions?????

    Repairing Permissions won't help this problem.
    You have to Repair the HD booted from the Install disk, look for a menubar to show up at one point, then look for Utilities>Disk Utility.
    Or you can boot up in Single User mode, by holding CMD+s, then type in...
    fsck -fy
    Repeat until it shows no errors fixed.
    Or you can et DiskWarrior, or TechTools.
    Or, if you don't need the data on the HD, you can try reformattin it usin the Zero Data option.

  • Error when install addon

    Hi..
    a few day ago i update my sap to PL 35, SP0
    i'm using SAP B1 2005B
    But when i update to PL 35, my old addon (copy express and fixedasset) cant run, and i try to reinstall, but always failed.
    I request addon update to my vendor, and i got it. But when i install into SAP, i found error on installation. Sound like :
    Add-on fixedassets: Add-on installation failed because another version is already installed. Please ensure that the version number is higher than the version previosly installed.
    Add-on CopyExpress: Add-on installation failed because another version is already installed. Please ensure that the version number is higher than the version previosly installed.
    I assume, this error happen because i'm not uninstalling the old addon. but how to remove my old addon?
    Or because another matter?
    My vendor respon so long, so i try my luck here
    Help me please. Thankyou for helping me.

    Hi Experts,
    I still have the same error with Fixed Asset installation after doing the following
    1. Use Add/Remove Programs to uninstall the add-ons.                                   
    2. Uninstall and re-install the DI API.                                   
    3. Go to your Business One directory and find two files that start 'AddObs' and have a .sbo extension. Delete these files.
    4. Delete %temp% File               
    5. Restart B1 and the add-ons should re-install.                              
    The same error message
    Add-On FixedAssets: Add-on Installation failed because another version is already installed. Please ensure that the version no. is higher than the version previously installed.
    Please help.
    Regards,
    Amy

  • Error when installing AddOn in 64-bit server

    hi, when i install on a 64-bit server i get this message: 'unable to cast com object of type 'system.__comobject' to interface type 'SAPbobscom.Company'. This operation failed because the QueryInterface call on the COM companent for the interface with IID '{3BA8DAED-5B33-4CE4-A4B8-B4308D86E524}' failed due to the following error: No such inteface supported (Exception from HRESULT: 0x80004002 (E_NONINTERFACE))
    It works fine on other servers. Any suggestions anyone?

    Found on internet that sometimes 64-bit servers miss to register COM modules so the solution was to re-register  the DLL's.
    i ran following commands:
    for %1 in (%windir%\system32\*.dll) do regsvr32 /s %1
    for %1 in (%windir%\system32\*.ocx) do regsvr32 /s %1
    Now it works fine!

  • Getting error when installing OBIEE 11.1.1.6 "Operating system does not support IPV4".

    HI,
    I am trying to install OBIEE 11.1.1.6 on Windows 7 .
    Have created repository successfully ,using the RCU 11.1.1.6 and now tring to install
    OBI. I am getting the below error
    "Operating system does not support IPV4".
    Can anyone please suggest why i am getting this error or
    how should i get rid with this error??
    Manoj.

    Just in case check this Doc ID 1410233.1
    ~ http://cool-bi.com

  • Why am I getting error when installing 5.1 iOS update

    Why am I getting an error message when trying to do software update to 5.1 iOS on iPhone4?

    It says more than that... try providing the EXACT and COMPLETE error if you want/need help.
    Alternatively, type the error into google and see what a search reveals.

  • Getting error when installing 12.1.1 "Insufficient privileges C:\iTunes\iTunes.Resources\nl.lproj"

    Running Windows 8.1 and I'm the only account on my pc so I have admin rights. I did install the last update successfully so not sure why this one doesn't want to install.

    Delete the folder C:\iTunes\iTunes.Resources\nl.lproj and then try again.
    Or delete the folder C:\iTunes\iTunes.Resources and try once more.
    If it still won't install, or there are other issues, see Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Toad error when installing

    hi am installing toad 10.5.1 in window 7 am geting the following error when installing
    the following product require .Net Framework 2.1 and will not be insattled can someone help where can i get the correct .Net Framework for oracle toad

    Pl post this in the TOAD forums - http://toadfororacle.com/forumindex.jspa?categoryID=649
    HTH
    Srini

  • SSL certificate error when installing

    Hi,
    We are getting error when installing the SSL certificate on our web dispatcher. Please see screenshot attached.
    Kindly assist us on this.
    Thank you!
    Regards,
    AJ

    You have to specify the additional certificates with the "-r" parameter.
    E g
    sapgenpse import_own_cert -c <cert_from_eg_verisign> -p <PSE-file> -r intermediate-one.cer -r intermediate-two.cer
    You can specify "-r" up to 10 times.

  • TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    Is that an error 2 message?
    If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Maybe you are looking for