Error when installing AddOn in 64-bit server

hi, when i install on a 64-bit server i get this message: 'unable to cast com object of type 'system.__comobject' to interface type 'SAPbobscom.Company'. This operation failed because the QueryInterface call on the COM companent for the interface with IID '{3BA8DAED-5B33-4CE4-A4B8-B4308D86E524}' failed due to the following error: No such inteface supported (Exception from HRESULT: 0x80004002 (E_NONINTERFACE))
It works fine on other servers. Any suggestions anyone?

Found on internet that sometimes 64-bit servers miss to register COM modules so the solution was to re-register the DLL's.
i ran following commands:
for %1 in (%windir%\system32\*.dll) do regsvr32 /s %1
for %1 in (%windir%\system32\*.ocx) do regsvr32 /s %1
Now it works fine!

Similar Messages

Getting error when installing addons on production

Hi all,
I have created addons setups using "sapb1addon installer.NET wizard" when i intalled its,
on development server its working fine same thing when i am trying to install on production server i am getting below error msg plz solve it as soon as possible
"Error:access to the path 'c:program Files(x86)\sap\sap business one\addons\laur\"
Regard,
sri

Hi,
If you have development system 32 bit and production system 64 bit and you are getting problem in addon running then open your project>solution explorer>right click on project>properties>go to compile tab>click on advanced compile option>in target CPU dropdown select x64 instead of x86/Any CPU
now debug your code and make your installer in same CPU mode and check your addon files on production server.
if your question is answered then close the thread
Regards,
Bhavank

Can't get past OCX error when installing ODAC 11g on Windows Server 2003

I have been trying to install ODAC 11g on Windows Server 2003 and can't get past the OCX error when registering oravsdbgeng11w.dll. I've read every message on this forum even remotely related to this problem and tried every solution offered. I have done a clean install into a new Oracle home, and made sure Instant Client is always included. All service packs and automatic updates have been installed. For what it's worth I have successfully installed ODAC 11g on Windows XP Pro.
If anyone out there has been able to get this up and running and would care to share the wisdom that would be greatly appreciated.
Thanks!
Michael Young
Latitude Geographics
Victoria, BC

Michael, as you already noticed, every time I have seen this issue it has been because ODT was being installed into an Oracle home where no client exists, or perhaps installed into an old oracle home where the client was an old version (eg Oracle10), or the client was broken. Usually though, the user unchecked the instant client checkbox during the ODAC install.
So you say you checked instant client and you still got the error? That doesn't add up...
Are you using 32-bit windows? If you are using 64 bit windows be sure to tell us.
Why don't you try avoiding using instant client at all, in case it is somehow not getting installed properly.
You can do this as follows:
1) Under the download links on OTN, go to the database download page.
2) Download the Oracle Database client 11g for Microsoft Windows
3) Run this installer and Install ODP.NET 1.x and 2.x into a new Oracle home from this client install, but nothing else. If ODP.NET is not listed there (it has been a long time since I looked at that) than just install a minimal Oracle client install.
4) Close the installer
5) Go back and install ODAC and this time choose "Oracle Server" radio button during the install (rather than the client install)
6) Install ODT and ODP.NET at least and be sure they are being installed into the Oracle home created in the first steps above.
This will avoid use of Instant Client and will hopefully avoid the OCX error. Let me know if this solves your problem.
Christian

C++ Runtime Error when installing addons

Hi everyone,
I get this error when trying to install or start any addon: Microsoft Visual C++ Runtime Library. Runtime Error! Program: C:\Program Files\SAP\SAP Business One\SAP Business One.exe. Abnormal program termination. And SAP Business One quits.
I've already reinstalled SQL Server, DotNet framwork 1.1 and 2.0, and SAP business One. Tried to start with anti-virus disabled, but error persisted.
This error appears on a windows 2003 server, and on all workstations within the domain.
I am totally out of options left to get this fixed. Anyone has a clue for me?
Thanks,
Andy

Refer: SAP Note Number 819501 that explains How to clean client after corrupt installation of add-on(s)
Read the note and understand whether any of the symptoms are mathcing with your problem, If Yes, follow the instructions as per the note.
Along with the above, Try this thread and guidelines - Microsoft C++ Run Time Error (This thread is not yet marked as answered)
Re: Microsoft C++ Run Time Error
If the thread helps you Thanks to Lucas and Tim.
Extract from the thread,
>> refer to note#808354, https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000808354
>> In addition to Lucas suggestion, there is another SAP Note 852031 following above Note 808354. Try the suggested work around in this Note only after going over Note 808354. The work around is good for cases where more than one UI versions ar registered at the same time.
>> https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000852031
Good Luck
Regards
Satish

Error when install addon

Hi..
a few day ago i update my sap to PL 35, SP0
i'm using SAP B1 2005B
But when i update to PL 35, my old addon (copy express and fixedasset) cant run, and i try to reinstall, but always failed.
I request addon update to my vendor, and i got it. But when i install into SAP, i found error on installation. Sound like :
Add-on fixedassets: Add-on installation failed because another version is already installed. Please ensure that the version number is higher than the version previosly installed.
Add-on CopyExpress: Add-on installation failed because another version is already installed. Please ensure that the version number is higher than the version previosly installed.
I assume, this error happen because i'm not uninstalling the old addon. but how to remove my old addon?
Or because another matter?
My vendor respon so long, so i try my luck here
Help me please. Thankyou for helping me.

Hi Experts,
I still have the same error with Fixed Asset installation after doing the following
1. Use Add/Remove Programs to uninstall the add-ons.
2. Uninstall and re-install the DI API.
3. Go to your Business One directory and find two files that start 'AddObs' and have a .sbo extension. Delete these files.
4. Delete %temp% File
5. Restart B1 and the add-ons should re-install.
The same error message
Add-On FixedAssets: Add-on Installation failed because another version is already installed. Please ensure that the version no. is higher than the version previously installed.
Please help.
Regards,
Amy

Error When Installing Sun Java System Application Server 9.1

Hi,
I"m trying to install the server to take [The Java EE 5 Tutorial|http://download.oracle.com/javaee/5/tutorial/doc/javaeetutorial5.pdf]. I found that +C:\Sun\AppServer\bin+ was added to my PATH environment variable, which is correct.
I get the message that the installation failed and I'm refered to the install log, which is under my signature.
Any suggestions you could provide would be appreciated. I'm trying to refresh my Java skills after a 5-year absence. I've been playing around with it for two days, installing and unstalling, verifying to be sure I got it right.
Thanks,
Lou
*The Install Log*
INFO - Start Sun Java System Message Queue configuration
INFO - End Sun Java System Message Queue configuration
INFO - unpacked jar file: C:\Sun\AppServer\lib\admin-cli.jar.pack.gz
INFO - unpacked jar file: C:\Sun\AppServer\lib\appserv-cmp.jar.pack.gz
INFO - unpacked jar file: C:\Sun\AppServer\lib\appserv-deployment-client.jar.pack.gz
INFO - unpacked jar file: C:\Sun\AppServer\lib\appserv-ext.jar.pack.gz
INFO - unpacked jar file: C:\Sun\AppServer\lib\appserv-jstl.jar.pack.gz
INFO - unpacked jar file: C:\Sun\AppServer\lib\appserv-rt.jar.pack.gz
INFO - unpacked jar file: C:\Sun\AppServer\lib\appserv-tags.jar.pack.gz
INFO - unpacked jar file: C:\Sun\AppServer\lib\com-sun-commons-launcher.jar.pack.gz
INFO - unpacked jar file: C:\Sun\AppServer\lib\j2ee-svc.jar.pack.gz
INFO - unpacked jar file: C:\Sun\AppServer\lib\javaee.jar.pack.gz
INFO - unpacked jar file: C:\Sun\AppServer\lib\sun-appserv-ant.jar.pack.gz
INFO - unpacked jar file: C:\Sun\AppServer\lib\webservices-rt.jar.pack.gz
INFO - unpacked jar file: C:\Sun\AppServer\lib\webservices-tools.jar.pack.gz
INFO - unpacked jar file: C:\Sun\AppServer\lib\deployment\sun-as-jsr88-dm.jar.pack.gz
INFO - unpacked jar file: C:\Sun\AppServer\lib\endorsed\activation.jar.pack.gz
INFO - unpacked jar file: C:\Sun\AppServer\lib\endorsed\webservices-api.jar.pack.gz
INFO - Start core server configuration.
INFO - The 'asadminenv.conf' file containing 'asadmin' preferences created at: C:\Sun\AppServer\config
ERROR - default domain creation returned following exception: abnormal subprocess termination: Detailed Message:The system cannot find the path specified.
Usage: create-domain [--user admin] [--adminport port_number] [--terse=false] [--echo=false] [--interactive=true] [--domaindir domain_directory] [--profile profile_name] [--template domain_template] [--passwordfile filename ] [--instanceport port_number] [--savemasterpassword=false] [--domainproperties (name=value)[:name=value]*] [--portbase portbase] [--savelogin=false] [--checkports=true] domain_name
CLI020 Operand is required.
The system cannot find the path specified.
The system cannot find the path specified.
Usage: create-domain [--user admin] [--adminport port_number] [--terse=false] [--echo=false] [--interactive=true] [--domaindir domain_directory] [--profile profile_name] [--template domain_template] [--passwordfile filename ] [--instanceport port_number] [--savemasterpassword=false] [--domainproperties (name=value)[:name=value]*] [--portbase portbase] [--savelogin=false] [--checkports=true] domain_name
CLI020 Operand is required.
The system cannot find the path specified.
INFO - End core server configuration.
INFO - Start samples configuration.
INFO - End samples configuration.
INFO - Start Java DB Configuration.
INFO - End Java DB Configuration.

Please list the content of 'asadminenv.conf'
Alternatively, you could just manually create the instance as follows:
asadmin.bat create-domain user admin adminport 4849 domaindir C:\Sun\AppServer\domains instanceport 8080 domain1

I am getting an error when installing using an Internal Update server

2013-7-11+22-38-3.797 [info] 1614
2013-7-11+22-38-3.807 [info] 1615
2013-7-11+22-38-3.817 [info] 1618
2013-7-11+22-38-3.827 [info] 1608
2013-7-11+22-38-3.897 [warning] 1445
2013-7-11+22-38-3.907 [warning] 1442
2013-7-11+22-38-3.917 [info] 1600
2013-7-11+22-38-6.857 [info] 1602
2013-7-11+22-38-6.877 [info] 1609
2013-7-11+22-38-6.887 [info] 1612
2013-7-11+22-38-6.897 [info] 1620
=O====== M/11.8.800.94 2013-07-11+22-38-10.277 ========
0000 [I] 00000010 "C:\Windows\system32\Macromed\Flash\FlashUtil32_11_8_800_94_ActiveX.exe" -refreshIEElevationPolicies
=X====== M/11.8.800.94 2013-07-11+22-38-10.347 ========
2013-7-11+22-38-11.307 [error] 1226 1062
=O====== M/11.8.800.94 2013-07-11+22-38-06.887 ========
0000 [I] 00000010 FlashPlayerInstaller.exe -install -iv 9
0001 [I] 00000020 C:\Windows\system32\FlashPlayerCPLApp.cpl
0002 [I] 00000013 C:\Windows\system32\Macromed\Flash\Flash32_11_8_800_94.ocx
0003 [I] 00000015 C:\Windows\system32\Macromed\Flash\FlashUtil32_11_8_800_94_ActiveX.exe
0004 [I] 00000016 C:\Windows\system32\Macromed\Flash\FlashUtil32_11_8_800_94_ActiveX.dll
0005 [I] 00000023 C:\Windows\system32\Macromed\Flash\activex.vch
0006 [I] 00000019 C:\Windows\system32\FlashPlayerCPLApp.cpl
0007 [W] 00001024 C:\Windows\system32\FlashPlayerCPLApp.cpl 183
0008 [W] 00001024 C:\Windows\system32\FlashPlayerApp.exe 183
0009 [I] 00000021 C:\Windows\system32\Macromed\Flash\FlashPlayerUpdateService.exe
0010 [W] 00001106
0011 [W] 00001106
0012 [W] 00001024 C:\Windows\system32\Macromed\Flash\FlashPlayerUpdateService.exe 183
0013 [I] 00000012
=X====== M/11.8.800.94 2013-07-11+22-38-14.208 ========
I am getting this in my log file and am curious about the error: [error] 1226 1062, and the warning 1445, 1442.
Everything seems to work fine but am worried that something went wrong.
Any information on these specific error and warning codes would be appreciated.
Thanks

=O====== M/11.8.800.94 2013-07-11+22-51-03.641 ========
0000 [I] 00000010 FlashPlayerInstaller.exe -install -iv 9
0001 [I] 00000020 C:\Windows\system32\FlashPlayerCPLApp.cpl
0002 [W] 00001036 Software\Mozilla\Firefox\extensions/Plugins 2
0003 [W] 00001036 Software\Mozilla\MaintenanceService\extensions/Plugins 2
0004 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0005 [W] 00001036 Software\Opera Software/Last CommandLine 2
0006 [W] 00001036 Software\Opera Software/Last CommandLine 2
0007 [W] 00001036 Software\Opera Software/Plugin Path 2
0008 [W] 00001036 Software\Opera Software/Plugin Path 2
0009 [I] 00000014 C:\Windows\system32\Macromed\Flash\NPSWF32_11_8_800_94.dll
0010 [I] 00000015 C:\Windows\system32\Macromed\Flash\FlashUtil32_11_8_800_94_Plugin.exe
0011 [I] 00000024 C:\Windows\system32\Macromed\Flash\plugin.vch
0012 [I] 00000017 C:\Windows\system32\Macromed\Flash
0013 [I] 00000022 C:\Windows\system32\Macromed\Flash\FlashPlayerPlugin_11_8_800_94.exe
0014 [I] 00000019 C:\Windows\system32\FlashPlayerCPLApp.cpl
0015 [W] 00001024 C:\Windows\system32\FlashPlayerCPLApp.cpl 183
0016 [W] 00001024 C:\Windows\system32\FlashPlayerApp.exe 183
0017 [I] 00000021 C:\Windows\system32\Macromed\Flash\FlashPlayerUpdateService.exe
0018 [W] 00001106
0019 [W] 00001106
0020 [W] 00001024 C:\Windows\system32\Macromed\Flash\FlashPlayerUpdateService.exe 183
0021 [I] 00000012
=X====== M/11.8.800.94 2013-07-11+22-51-08.665 ========
I had this after that, would this have fixed it? If not Is it a big concern? How often does FlashPlayerUpdateService.exe need to be updated? What could have caused this?
Thank you again for replying. Is there anyway to get a list of error code's explained so i can troubleshoot independently.
Thanks

Error when install Infrastructure 10g 10.1.2 in Windows2000 server

My environment:
RDBMS Version: 10.1.0.3.1
Operating System and Version: Windows2000 SP4
Product (i.e., OAS, IAS, etc): 10g AS Release 2
Product Version: 10.1.2
JDK Version: 1.4
I have the folowing error when installing the Infrastructure (in the stage of SSO Configure Assistant):
Default Subscriber GUID: E0575BDE015C411CAD99BDEF85F79029
Subscriber Naming attribute: dc
Default Subscriber Name: server01
*** Resetting user DN and GUID information ...***
Done....
PL/SQL procedure successfully completed.
No errors.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.1 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
NLS_LANG character set = WE8MSWIN1252
NLS_LANG param = AMERICAN_AMERICA.WE8MSWIN1252
ERROR : Exception while configing SSO DAD :
oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://myserver.domain.com:3060/. Base Exception : javax.naming.CommunicationException: Request: 1 cancelled
at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:523)
Please advice.
Thanks
Trung

I don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
When you get the error, start OID using the command line then try running the config assistant again.
Hope this helps
Alex

Oracle Application Server for SLES Linux error when install

I try install Oracle Application Server Infrastructure (as_linux_x86_portal_wireless_101202) on SLES:
1. I install orarun package.
2. Install patch 3167528 - remove entries from the "/etc/services"
error when install - the OPMN process manager failed to start.
I read opmn/logs: can't load shared library libdb.so.2...
I check /usr/bin/libdb.so and found libdb-4.3.so
I create simbolik link libdb.so.2 to libdb-4.3.so and retry install oracle Application Server Infrastructure, but have this error again.
I try install Oracle Application Server Infrastructure on several linux distribs, but have this error again adn again..
how I can fix this error? help mee pls..

I think that you need to download a patch for that error, this patch is just a library that you need create a link to it.
Follow this Metalink Note 790943.1
Greetings

Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
UnsatisfiedLinkError exception loading native library: njni10
Configuration assistant "Oracle Net Configuration Assistant" failed
The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

Errors when installing WebPass

Hello,
I have some errors when installing WebPass. During the installation, the wizard asked me for the location of httpd.conf. I tried once with standalone Apache server and once with Oracle HTTP Server.
Result with standalone Apache server (when running apachectl):
httpd: Syntax error on line 419 of /opt/apache/conf/httpd.conf: Cannot load /opt/netpoint/webcomponent/identity/oblix/apps/webpass/bin/libwebpass.so into server: /opt/netpoint/webcomponent/identity/oblix/apps/webpass/bin/libwebpass.so: undefined symbol: ap_table_get
Result with Oracle HTTP Server (when running through opmnctl):
/opt/oracle/oim1014/Apache/Apache/bin/apachectl start: execing httpd
Env variable LD_ASSUME_KERNEL not set to 2.4.19 in Webpass
With Oracle HTTP Server case, I've tried to set environment variable LD_ASSUME_KERNEL in both command shell as well as opmn.xml
Any suggestion would be appreciated.
Thanks
David

You do not have to look too far. OHS 11g is based on Apache 2.2. and available as 32-bit and 64-bit version for Linux. The OAM 10.1.4.3 WebPass on the other hand for OHS is only available as 32-bit module. I have posted a short description on how to install it on a 64-bit Linux env.
http://blogs.oracle.com/olaf/2009/08/ofm_11g_install_oam_10143_32-b.html
--olaf

Error While Installing IDES ECC6 with SQL Server 2005

Dear Experts,
I found an error while installing IDES ECC6 with SQL Server 2005. The error is raising at the stage of 17 of 24 processing the procedure of 195 of 197 (sap_z_set_permissions).
I have tried several times by configuring different type of activites but still i am facing the same problem at the same stage. Please help me in thig regard.
I herewith pasted hereunder log files information
Regards,
B.Sudharsan
ERROR 2008-01-17 18:38:47
FCO-00011 The step ExeProcs with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs was executed with status ERROR .
INFO 2008-01-17 18:40:05
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs".
ERROR 2008-01-17 18:38:47
MDB-05053 Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.

Sudarshan,
Occasionally, mid-way through the upgrade, DB permissions to users might change. Check to see, if the users SAP<SID>, OPS$ users have the DBA privilege. Re-assign the role and try continuing with the upgrade.

What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

Hello,
My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
The complete error message is:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
What I did already:
check my RAM (16go gskill)
remove unnecessary hard drives
replace my "old" SSD with a clean new one
remove my sound cards
remove the mouse and use only keyboard
reset the BIOS
check every LED on the motherboard (asus sabertooth z77) and there is no problem
What are the problems?
Thanks,
Adrien.

Hi,
If all images cannot be installed, we have a reason to suspect the hardware cause.
If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
Alex Zhao
TechNet Community Support

Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)

I'm trying to migrate a Sql Server 2k database to an Oracle 8i schema using OMWB. After using BCP to collect metadata information on the source database, I tried to capture the source data model and got a "Capture aborted" message on the progress screen (even though then it appears a dialog window reporting "0 errors and 0 warnings", funny!). Down there is the error log OMWB generated. After reading some posts, I changed some columns of the OMWB dictionary that holds the source database name, but still got the same error. If someone can enlighten me on this toppic, I'd greatly appreciated it.
Here's the error log of OMWB:
** Oracle Migration Workbench
** Production
** ( Build 20050629 )
** OMWB_HOME: D:\Datos\Download\Oracle\Oracle Migration Workbench\omwb
** user language: es
** user region: null
** user timezone:
** file encoding: Cp1252
** java version: 1.4.2_04
** java vendor: Sun Microsystems Inc.
** o.s. arch: x86
** o.s. name: Windows 2000
** o.s. version: 5.0
** Classpath:
..\lib\boot.jar
** Started : Fri Feb 23 17:18:48 GMT-03:00 2007
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
Repository Connection URL: jdbc:oracle:thin:@ServerCms:1521:sigcewbc
** The following plugins are installed:
** Microsoft Access 2.0/95/97/2000/2002/2003 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 2000 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 6.5 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 7.0 Plugin, Production Release 10.1.0.4.0
** Active Plugin : SQLServer2K
EXCEPTION :SQLServer2KDisconnSourceModelLoad.loadSourceModel(): oracle.mtg.migration.MigrationStopException: java.lang.IndexOutOfBoundsException: Index: 15, Size: 15
** Shutdown : Fri Feb 23 18:00:50 GMT-03:00 2007

Duplicate thread
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)

Error when installing SDK on BW platform

We have successfully installed SDK to our DS client, but get an error when installing the extensions on the BW platform (SP12):
I understand that I need to reboot the portal server, but the error message indicate that the issue will not be resolved. Any suggestions?

Hi,
it could be that the depending extension was unpacked while installing the extension pack.
please go to folder C:\user\..\Analysis-config\plugins and check if the extension jar-file is available. If there is only a folder with the extension name you have to delete this folder,
uninstall the extension pack in your Design Studio (client side),
go to Eclipse and check the "Unpack after installing" checkbox in your project Features,
if it is checked please unckeck it,
export your extension pack to zip-file,
install your extenion pack again on client side,
now the jar-file should be available.
You sholud deploy your extension on Server without any errors.
kind regards
Patrick

Error when installing AddOn in 64-bit server

Similar Messages

Maybe you are looking for