Getting Error while Changing the status of Batch

Hi ,
For Reverting back from Completed to WIP i am using gme_api_pub.uncertify_batch API, but getting the following error.
I am passing batch_id to the API but unalbe to solve the issue.
x return status: E
msg count 2 is : 1
err msg 1is: No keys specified to identify the rows in the table GME_BATCH_HEADER.
error may be: User-Defined Exception
Help is highly appreciated.
Regards,
RR

Hi ,
For Reverting back from Completed to WIP i am using gme_api_pub.uncertify_batch API, but getting the following error.
I am passing batch_id to the API but unalbe to solve the issue.
x return status: E
msg count 2 is : 1
err msg 1is: No keys specified to identify the rows in the table GME_BATCH_HEADER.
error may be: User-Defined Exception
Help is highly appreciated.
Regards,
RR

Similar Messages

  • Error in CV02N while changing the status.

    Hi Experts,
    We are getting a error while changing the status of technical change document that " Inconsistent characteristic value assignment" .The document is in status "in use" and we are trying to change it to " old version" using T code CV02N.
    when I tried to see the error desription it is telling that delete the inconsistencies. But I didn't find the list of incosistencies. What may be the problem? Please help me out to get ride of this problem.
    Thanks and best regards,
    Praveen

    Hi Pete,
    The full text message: Inconsistent characteristic value assignment
    Message no. C1821
    In diagnosis it is telling that "You want to change the value assigned to a characteristic. However, the change causes inconsistency, so the new value is not allowed."
    Actually I am just changing the status of the document. I am not changing any characteristic value.
    Actually it is appearing as information message. but while saving it pop up and not allowing to save.
    Please do the needful.
    Best Regards,
    Praveen

  • Error While Changing the Batch Characterstics

    Hi Guys,
    We are getting error while Passing Material,Plan and Batch(Concatenated Value) to BAPI_OBJCL_CHANGE in the LV_OBJECT(BAPI1003_KEY-OBJECT) field we are getting the following error "Object LV_OBJECT Value does not exist" in the Return Table of the Bapi. Do we need to do any configurations for this?
    Thanks
    Nav

    Issue Got Resolved.
    Thanks,
    Nav

  • While Changing the status system gives error

    Dear Experts,
    In Solution Manger,  While changing the status from Tcode SE38 with Program CRM_SOCM_SERVICE_REPORT system gives error.
    Document 8000002519 refused for technical reasons: ERROR_FREE
    Message no. SOCM_ACTION_LOG203
    Diagnosis
    The status value cannot be changed.
    The document may no longer be modifiable as a result of its status, or it may be being edited by another user.
    System Response
    This change transaction is skipped during report processing.
    Procedure
    Analyze the corresponding document during transaction processing and perform the status change manually if necessary.
    Also if i select the status as in process, then it executes sucessfully.  Please help me in this.
    Ramesh Jaiswal
    9867936636

    Hi Ramesh,
    Pls check your SP level because till SP17 this (CRM_SERV_REPORT) Tcode is not present
    I just checked.
    So it seems this is availabe only after SP18.... we can use the above report.
    Kindly confirm once you solve your problem.
    Dirk
    Can you please tell us a document which wil tel us what technical things have been changed in this new SP18.for e.g the source for this information.
    Regards
    Prakhar

  • How to get the old and new statuses of CAD indicator (DRAW-CADKZ) while changing the status of document (DRAW-DOKST)?

    I want to delete the originals of document while changing the status of document based on CAD indicator status. For this I have implemented BADI DOCUMENT_STATUS01 and the method AFTER_CHANGE_STATUS. From this, the BADI is triggering whenever I am changing the document status and I can able to delete the originals. But here my requirement is to check the CAD indicator status to delete those originals. I.e. whenever the document status will change first time the CAD indicator status will also change. Based on that old and new status of CAD indicator I have to do delete operation.
    If anybody has an idea about SAP documents please help me
    Thank you,
    Regards,
    Ramesh

    First the document is exists in SAP in FR status. But when the CAD system will connect to SAP then the status is changing from ‘FR’ to ‘IN’ after that the CAD Indicator is populating from Blank to ‘X’.
    I want to know in which place the CAD indicator value is changing (any user exits available or any BADI s available when changing the CAD indicator) when connected to CAD system.

  • While changing the status of content in Weblogic 10.3 programitically

    while changing the status of content in Weblogic 10.3 programitically is giving the error
    User is not authorized to check in the node.
         at com.bea.content.virtual.internal.server.bean.InternalWorkspaceOpsBean.handleWorkflowActions(InternalWorkspaceOpsBean.java:480)
         at com.bea.content.virtual.internal.server.bean.InternalWorkspaceOpsBean.internalCheckIn(InternalWorkspaceOpsBean.java:420)
         at com.bea.content.virtual.internal.server.bean.InternalWorkspaceOpsBean.checkIn(InternalWorkspaceOpsBean.java:343)
         at com.bea.content.virtual.internal.server.bean.WorkspaceOps_xe5vix_ELOImpl.checkIn(WorkspaceOps_xe5vix_ELOImpl.java:166)
         at com.bea.content.virtual.internal.WorkspaceOpsImpl.checkIn(WorkspaceOpsImpl.java:90)
         at com.bea.content.federated.internal.VersionManagerImpl.checkIn(VersionManagerImpl.java:239)
         at com.nab.portal.portlets.cmscontent.EndDateCMSContent.updateNodeStatus(EndDateCMSContent.java:243)
         at jsp_servlet._portlets._cmscontent.__sampletest._jspService(__sampletest.java:140)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at org.apache.beehive.netui.pageflow.PageFlowPageFilter.continueChainNoWrapper(PageFlowPageFilter.java:455)
         at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:432)
         at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:336)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at com.bea.jsptools.servlet.PagedResultServiceFilter.doFilter(PagedResultServiceFilter.java:82)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:503)
         at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:251)
         at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
         at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:130)
         at org.apache.beehive.netui.pageflow.faces.internal.PageFlowViewHandler.renderView(PageFlowViewHandler.java:203)
         at com.bea.portlet.adapter.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:77)
         at org.apache.beehive.netui.pageflow.faces.internal.PageFlowViewHandler.renderView(PageFlowViewHandler.java:203)
         at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
         at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
         at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at org.apache.beehive.netui.pageflow.PageFlowPageFilter.continueChainNoWrapper(PageFlowPageFilter.java:455)
         at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:432)
         at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at com.nab.portal.filter.UserSessionFilter.doFilter(UserSessionFilter.java:176)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at com.nab.portal.filter.CrossSiteScriptingFilter.doFilter(CrossSiteScriptingFilter.java:333)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at com.bea.portal.tools.servlet.http.HttpContextFilter.doFilter(HttpContextFilter.java:60)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:336)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at com.bea.jsptools.servlet.PagedResultServiceFilter.doFilter(PagedResultServiceFilter.java:82)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3502)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2186)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2092)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    the node is checke odut by annoymous user biut its not checked in the status from 1 to 2 is updated but it not updated to published or retired
    are there any Entreprise scoped roles which sholud be created to set the visitor entitlements on the content
    Please do reply asap
    Thanks
    Regards
    Rani
    Rani Bhatia

    hi
    while changing the sttaus of content in weblogic 10.3 programitcally
    i have written this code List nodeIds=null;
         INodeManager iNodeManager= ContentManagerFactory.getNodeManager();
              try {
              ID nodeId = new ID();
              nodeIds = new ArrayList();
                   linkNode =iNodeManager.getNode(ctx,fileName);
                   log.info("Linknode"+linkNode);
                   String Encodedpath= linkNode.getURLEncodedPath();
                   log.info("Encodedpath"+Encodedpath);
                   com.bea.content.ID nodeid= linkNode.getId();
                   nodeIds.add(nodeid);
              log.info(nodeid);;
                   String repoName = nodeid.getRepositoryName();
                   log.info("repoName"+repoName);
                        IVirtualRepositoryManager repoMgr = ContentManagerFactory.getVirtualRepositoryManager();
                        com.bea.content.federated. IVersionManager iversionManager= ContentManagerFactory.getVersionManager();
                        com.bea.content.federated.IWorkflowManager iWorkflowManager= ContentManagerFactory.getWorkflowManager();
                   if(linkNode!=null)
                        int i= linkNode.getWorkflowStatus();
                                  log.info("Workflow Status"+i);
                                  int j=linkNode.getLifeCycleStatus();
                                  log.info("Workflow Status"+j);
                                  linkNode.setLifeCycleStataus(5);
                                  linkNode.setWorkflowStatus(5);
                                  //iNodeManager.save(ctx, linkNode);
    iversionManager.checkOut(ctx, nodeid, version.getVersionId());                         com.bea.content.virtual.version.VersionableContent versionableContent1 = iversionManager.getVersion(ctx, nodeid, "1");
                             versionableContent1.setStatus(5);
                             iversionmanager.checkIn(ctx, nodeid, versionableContent1);
                             log.info("checkin");
                             b=true;
                        else
                             b=false;
                             log.info("Node already retired ");
              catch (AuthenticationException auex) {
                   log.error("WEB1013IF-3 getLinkNode" + auex.toString());               
              } catch (AuthorizationException authex) {
                   log.error("WEB1013IF-4 getLinkNode" + authex.toString());     
              }catch (RepositoryException repoEx) {
                   log.error("WEB1013IF-5 getLinkNode" + repoEx.toString());
              return b;
    by default annoymous user check out the node
    if for any logged in user which api has to be used eg if i have created the weblogic user how to set this user through api , which apis are used to set this user programmitically so that this user can check out the node and check in the node so that its status can be updated
    Thanks
    Regards
    Rani Bhatia
    Edited by: user10309975 on Jul 5, 2010 10:29 PM

  • Getting error while creating the variable of Schema Element type

    Hi everybody,
    For creating a variable of schema element type I am doing the following steps...
    Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
    IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
    What is mean by that.
    I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
    Thanks.

    Hi,
    I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
    [http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
    The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
    Regards,
    Nacho

  • Getting error while creating the Shopping cart.

    Hi ,
    I am getting error while creating the Shopping cart.
    a.Error in account assignment for item 1  (Item  Testing SC ) 
    b.Duplicates of Cost Centre T10063 are defined in SRM  (Item  Testing SC ) 
    Kindly provide the solutions.
    Thanks,
    Dev

    Try the following in the ERP backend system:
    Standard Hierarchy Inconsistencies
    Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
    Update from SAP Global support, the following was the email received:
    in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
    If you think that your standard hierarchy is inconsistent you can check that as following:
    Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
    Alternatively, you can run the report 'RKCORRH1' (TN SE38).
    Run both the Hierarchy->Master data->test and the
    Hierarchy->Master data->comparison.
    As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
    Once the above two are run, again when you go to test, the inconsistency disappears.

  • Getting Error while accessing the data using odata service

    Hi All,
    Iam new to SAP FIORI. 
    Iam getting the below error while accessing the data using odata service.
    "Failed to load resource: the server responded with a status of 404 (Not found)"
    "No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin "
    i have tried all the solutions like changing the url pattern "proxy/htttp".
    and disabled - security in chrome (Chrome is Updated version).
    i tried with IE still got the same problem.
    And installed all the required software in eclipse
    While installing GWPA plugin i got the following error.
    let me know if any one have idea.
    Thanks in advance.

    > Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
    >
    > so in that way :
    > bot the options are fine what ever take less time.
    Sorry mate, but YOU have to know what you want here.
    I gave you an easy to follow set of steps.
    As you don't seam to mind the outcome, just might just use them...
    > I wanted to know weathe i can use the  loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
    We had this discussion before...
    >
    > For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
    >
    > For ease of use you could also just do:
    > - logon as superdba
    > - drop user SAPR3
    > - create user SAPR3 password SOMEPW not exclusive dba
    >
    > After these steps you can easily pump the data into the database again.
    >
    > So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
    >  i already have that user SAPR3 can i use the same.
    Yes, you do have the SAPR3 user.
    But you don't seem to like to read documentation or learn about how the tools work or anything like that.
    Therefore I gave you s simple way to reach your goal.
    Of course it's possible to reuse the user.
    But then you would have to deal with already existing tables, already existing data etc.
    You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
    regards,
    Lars

  • Error while checking the status of Oracle Cluster ware

    Hi
    I was trying to install the database using dbca after setting up the grid and database software on LINUX x86-64 RHEL 5.7 machine. The database software version is 11.2.0.3. It throwing the error regarding the connectivity of clusterware. So I checked the status of clusterware.
    -bash-3.2$ ./crsctl stat res -t
    CRS-4535: Cannot communicate with Cluster Ready Services
    CRS-4000: Command Status failed, or completed with errors.
    -bash-3.2$
    But when I ran below one:
    -bash-3.2$ ./crsctl stat res -t -init
    NAME TARGET STATE SERVER STATE_DETAILS
    Cluster Resources
    ora.asm
    1 ONLINE ONLINE sfv9699 Started
    ora.cluster_interconnect.haip
    1 ONLINE ONLINE sfv9699
    ora.crf
    1 ONLINE ONLINE sfv9699
    ora.crsd
    1 ONLINE OFFLINE
    ora.cssd
    1 ONLINE ONLINE sfv9699
    ora.cssdmonitor
    1 ONLINE ONLINE sfv9699
    ora.ctssd
    1 ONLINE ONLINE sfv9699 OBSERVER
    ora.diskmon
    1 OFFLINE OFFLINE
    ora.drivers.acfs
    1 ONLINE ONLINE sfv9699
    ora.evmd
    1 ONLINE INTERMEDIATE sfv9699
    ora.gipcd
    1 ONLINE ONLINE sfv9699
    ora.gpnpd
    1 ONLINE ONLINE sfv9699
    ora.mdnsd
    1 ONLINE ONLINE sfv9699
    So i saw that the crsd having some issue. I checked the alert log and crsd log. Below are the output.
    Alert <server_name>.log
    2012-10-20 15:37:51.408
    [ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
    2012-10-20 15:37:52.968
    [crsd(5188)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
    2012-10-20 15:37:52.984
    [crsd(5188)]CRS-0804:Cluster Ready Service aborted due to Oracle Cluster Registry error [PROC-26: Error while accessing the physical storage
    ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    ]. Details at (:CRSD00111:) in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
    2012-10-20 15:37:53.471
    [ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
    2012-10-20 15:37:53.472
    [ohasd(3694)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
    CRSD.log
    2012-10-20 15:37:52.456: [ CRSMAIN][3563381328] Checking the OCR device
    2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Sync-up with OCR
    2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Connecting to the CSS Daemon
    2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Getting local node number
    2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
    [   CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
    2012-10-20 15:37:52.897: [  OCRASM][3563381328]proprasmo: Error in open/create file in dg [DATA]
    [  OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
    2012-10-20 15:37:52.898: [  OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    2012-10-20 15:37:52.967: [  OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
    2012-10-20 15:37:52.967: [  OCRASM][3563381328]proprasmo: The ASM instance is down
    2012-10-20 15:37:52.968: [  OCRRAW][3563381328]proprioo: Failed to open [+DATA]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
    2012-10-20 15:37:52.968: [  OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
    2012-10-20 15:37:52.968: [  OCRASM][3563381328]proprasmcl: asmhandle is NULL
    2012-10-20 15:37:52.969: [    GIPC][3563381328] gipcCheckInitialization: possible incompatible non-threaded init from [prom.c : 690], original from [clsss.c : 5326]
    2012-10-20 15:37:52.975: [ default][3563381328]clsvactversion:4: Retrieving Active Version from local storage.
    2012-10-20 15:37:52.978: [ CSSCLNT][3563381328]clssgsgrppubdata: group (ocr_SFV9699-cluster) not found
    2012-10-20 15:37:52.978: [  OCRRAW][3563381328]proprio_repairconf: Failed to retrieve the group public data. CSS ret code [20]
    2012-10-20 15:37:52.981: [  OCRRAW][3563381328]proprioo: Failed to auto repair the OCR configuration.
    2012-10-20 15:37:52.981: [  OCRRAW][3563381328]proprinit: Could not open raw device
    2012-10-20 15:37:52.981: [  OCRASM][3563381328]proprasmcl: asmhandle is NULL
    2012-10-20 15:37:52.983: [  OCRAPI][3563381328]a_init:16!: Backend init unsuccessful : [26]
    2012-10-20 15:37:52.984: [  CRSOCR][3563381328] OCR context init failure. Error: PROC-26: Error while accessing the physical storage
    ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    2012-10-20 15:37:52.984: [ CRSMAIN][3563381328] Created alert : (:CRSD00111:) : Could not init OCR, error: PROC-26: Error while accessing the physical storage
    ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    2012-10-20 15:37:52.984: [    CRSD][3563381328][PANIC] CRSD exiting: Could not init OCR, code: 26
    2012-10-20 15:37:52.984: [    CRSD][3563381328] Done.
    =======================
    I see in the above log that saying ASM instance is down and failed to open +DATA .
    But the asm instance up and running
    SQL> select instance_name,status from v$instance;
    INSTANCE_NAME STATUS
    +ASM1            STARTED
    And we havent created any disk named DATA before the installation. We have created only below two disks
    SQL> select name,header_status from v$asm_disk;
    NAME HEADER_STATUS
    ASM_DATA MEMBER
    FLASH_RECOVERY MEMBER
    But I am seeing a diskgroup in the v$asm_diskgroup which we havent created.
    SQL> select name,state from v$asm_diskgroup;
    NAME STATE
    DATA MOUNTED
    Ya this is a second time installtion. In the first installtion we created the asmdisk as DATA. But later everything (RAW device ) was formatted and this new disks has been created and installtion again started
    [root@SFV9699 bin]# oracleasm listdisks
    ASM_DATA
    FLASH_RECOVERY
    Seems like its trying to read the old disk DATA.
    we have done asmscanning too with oracleasm scan disks. but no use.
    Where I can remove the old entry of DATA disk.
    It would be a great if a quick response get.
    Thanks
    SHIYAS M

    The permission looks fine. If it was permission issue then y it is trying to read the DATA disk which I havent created this time at all ( But created in the first installation).
    2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
    [ CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
    2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: *Error in open/create file in dg [DATA]*[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
    2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
    2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
    2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: *Failed to open [+DATA].* Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
    2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
    2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
    The only disks created are
    [root@SFV9699 dev]# oracleasm listdisks
    ASM_DATA
    FLASH_RECOVERY
    And these disks are showing part of that group also.. Not quite sure how this happened..
    what abt dropping this group.. will anything work.

  • Getting error while opening the workbook

    Hi,
    I am getting one error while opening the workbook.
    Error: The Dependency "Join condition" is not found in EUL.
    Basically, the workbook was working fine. But we droped some joins and recreated new joins. After this change, our worknbooks starts giving this error.
    Please advice.
    Where i can get the dependency information in EUL?
    Thanks, rajesh

    This has to be one of the most 'pain in the butt' errors you can get (well ... 0000 - normal successful completion is another).
    Although I've seen this one for years, these days I'm finding many more examples that are happening to me with this (simply the environment I'm in) and in many cases, requires rebuilding the workbook again. For example, sometimes I put in the join that I think it's having a problem with, but the existing workbook simply won't run. Recreating the workbook exactly the same gets it to work properly. Maybe it's a 4.x thing (version I'm on these days) ... but just a warning that you may well have to rebuild.
    Russ

  • Error while changing the Display Attribute into Navigational Attribute

    Hi all.. Gud Mrng.
    I was changed the attribute (product) from display attribute into navigational attribute and while save and activating the info object it is not getting activated and it is throwing the below error message.
    Error Message: u201CThe Info object is being used in several data targetsu201D
    My Questions:
    i)     Do I need to delete the data from all the data targets (where this info object is using)??
    ii)     Do I need to delete data only from the main info object (Zmaterial)? Is this single action enough?
    Please suggest me which action I need to follow & What are the precautions need to take while changing the Display Attribute (product) into Navigational attribute of info object (Zmaterial).
    Thanks in advance.
    Thanks & Regards,
    B Venugopal

    Hi Garima
    Only in case of key figures we cannot change it from display to navigational.
    If the info object is a characteristics then in the General tab of the info object if you select 'attribute only' then the iobj would be a display attribute only. If you leave it unmarked then you can use the iobj as a navigational atribute.
    I am sure you know that these settings only mean if a IOBJ can be used as display or navigational.  To  use it as a navigational within another object you will have to change the settings from 'DIS' to 'NAV' for the said info object in the 'Attributes' tab of its parent info object.
    Further if you use the parent info object in any data target / infio provider you will have to further mark the info object as 'navigational' while defining the attrbute of the said data target / info provider. The info object gets displayed in the data target / info provider attribute properties as 'parent IOBJ_info object'
    Cheers
    Umesh

  • Getting error while starting the RAC instance through SRVCTL utility

    Hi DBA's,
    We are getting the below error while starting the Orcale 10g RAC instance on one of the node thru SRVCTL:
    oracle:/home/oracle]>srvctl start instance -d SQLTSTM2 -i SQLTSTM21
    PRKP-1001 : Error starting instance SQLTSTM21 on node r1racd
    CRS-1028: Dependency analysis failed because of:
    CRS-0223: Resource 'ora.SQLTSTM2.SQLTSTM21.inst' has placement error.
    :oracle:/home/oracle]>
    srvctl status database -d SQLTSTM2
    PRKO-2015 : Error in checking condition of instance on node: r1racd
    Instance SQLTSTM22 is running on node r2racd
    oracle:/opt/oracle/product/10.2.0/db]>
    NOTE: but i am able to start the instance thru SQLPLUS.
    After starting the instance thru SQLPLUS i checked the CRS_STAT -t . It shows the status offline... Please find the details below:
    Name Type Target State Host
    ora....21.inst application OFFLINE OFFLINE
    ora....22.inst application ONLINE ONLINE r2racd
    ora....VLM2.db application ONLINE ONLINE r2racd
    ora....21.inst application ONLINE ONLINE r1racd
    ora....22.inst application ONLINE ONLINE r2racd
    ora....STM2.db application ONLINE ONLINE r2racd
    ora....SM1.asm application ONLINE ONLINE r1racd
    ora....CD.lsnr application ONLINE ONLINE r1racd
    ora.r1racd.gsd application ONLINE ONLINE r1racd
    ora.r1racd.ons application ONLINE ONLINE r1racd
    ora.r1racd.vip application ONLINE ONLINE r1racd
    ora....SM2.asm application ONLINE ONLINE r2racd
    ora....CD.lsnr application ONLINE ONLINE r2racd
    ora.r2racd.gsd application ONLINE ONLINE r2racd
    ora.r2racd.ons application ONLINE ONLINE r2racd
    ora.r2racd.vip application ONLINE ONLINE r2racd
    Thanks in advance...
    Anil

    Use the 'srvctl config database -d ' command to check if the instance has been configured in the Oracle Cluster Registry; make sure that the GSDs are running on each node in the cluster.
    Also refere to Metalink note 295328.1

  • Error while changing the component quantity

    Hi Experts,
    I facing an issue, while changing the component quantity of the process order. Parent material have fixed lot size and the componenets maintained as fixed quantity in BOM. When I try to change the quantity of the components in process order, it showing an message "Please re-explode the BOM, since the component quanities are changed.
    Why am getting this message?
    Regards,
    Sureshbabu G.

    Hi
    As Mr Reddy said, there is a fixed quantity indicator ticked in the BOM, therefore you are getting that error. Please remove the tick in BOM in the item details besides the quantity field and then try changing the quantites while confirming.
    Chandra

  • Error while changing the physical IP address of SOA related datasource

    Hello Everyone!!!
    I am facing a problem while changing the ip address of my SOA related datasource in weblogic 10.3,Below is a brief description about my prb:
    I have created a domain in weblogic 10.3 and have configured a datasource to it and its working fine initially.
    But i had to change the ip address of my datasource(i.e Edit the existing the setting of my domain) as my database was migrated to another m/c.The changes that i did was,I changed the url in the connectionpool tab of each of the datasource's listed in admin console(Please let me know if i have left out any other important place in which i had to make this change).
    After making this change my ManagedServer starts but my Enterprise Application named soa-infra doesnt start and when i checked the log to find out the error,this is what i came across:
    B2B-50025: Repository error: Error -: B2B-51572: Error reading input stream.: java.io.IOException: Stream closed
         at oracle.tip.b2b.init.Repository.initExchange(Repository.java:658)
         at oracle.tip.b2b.init.Repository.initialize(Repository.java:764)
         at oracle.tip.b2b.init.B2BServer.readRepository(B2BServer.java:509)
         at oracle.tip.b2b.init.B2BServer.initialize(B2BServer.java:212)
         at oracle.tip.b2b.engine.ThreadWorkExecutor.startB2B(ThreadWorkExecutor.java:345)
         at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:203)
         at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
         at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
         at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
    Caused by: Error -: B2B-51572: Error reading input stream.: java.io.IOException: Stream closed
    Any suggestion would be of great help.
    Thks in advance!!!

    Hey thks for the reply,
    We were able to solve the problem by just restarting our database,
    i got some reference from the below link(pls refer to this topic:Changing the IP Address of a Metadata Repository Installation):
    [http://download.oracle.com/docs/cd/E12839_01/core.1111/e10105/host.htm#CHDHAEFE]
    but m still confused do i have to restart my database server each time i change the DB server that m pointing to in my weblogic console and if yes can you pls help me understand what change happens when the database restarts that makes this work.
    Another issue that m facing now is that after solving the above prb(by restarting the DB) m not able to deploy process's on to my server.
    The Exception that appears in the log file is as follows:
    [2011-02-08T13:03:33.220+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.compiler] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <BPEL1Processor::generateProcessClass> MerchantSales_BPELProcess.bpel(line 228): invalid query[[
    query "/EmailPayload/ns3:FromAccountName" is invalid, because java.lang.IllegalArgumentException: null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService [Cause=null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService]
    Check the XML schema and make sure your query string is valid
    [2011-02-08T13:03:33.448+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.deployment] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <CubeProcessLoader::create> [[
    java.lang.Exception: BPEL compilation failed
         at com.collaxa.cube.lang.compiler.BPEL1Processor.generateProcessClass(BPEL1Processor.java:529)
         at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:495)
         at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:438)
         at com.collaxa.cube.lang.compiler.BPEL1Processor.createCubeProcess(BPEL1Processor.java:396)
         at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProcessFactory.java:61)
         at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProcessLoader.java:112)
         at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:238)
         at com.collaxa.cube.engine.deployment.DeploymentManager.deployComponent(DeploymentManager.java:182)
         at com.collaxa.cube.ejb.impl.CubeServerManagerBean._deployOrLoadComponent(CubeServerManagerBean.java:726)
         at com.collaxa.cube.ejb.impl.CubeServerManagerBean.deployComponent(CubeServerManagerBean.java:114)
         at com.collaxa.cube.ejb.impl.bpel.BPELServerManagerBean.deployComponent(BPELServerManagerBean.java:85)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)

Maybe you are looking for