Getting Error While Going For Print Preview in ALV Report

Hi,
We doveloped a new report based on client requirment while going for print preview all the fields are shufling.Can you please guide me I am unable to solve this problem.
Regards
Suresh

Do you use a field for coloring a column or cell?
If the coding is not too large it could be helpfull to post the coding as well.
Regards,
John.

Similar Messages

  • Getting error while trying for software update although ios 7.1.1 version is released

    Getting error while I am trying to search the ios 7.1.1 update

    Hey there YashasManju,
    It sounds like you are unable to update to iOS 7.1.1 due to an error message. I would start with the troubleshooting from the following article to help resolve the issue:
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    If you are getting a specific error message, you may be able to find it in the following article and troubleshoot accordingly:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Endeca : getting error while trying to print page

    Hi experts ,
    Can you please tell any one , i am getting below error while printing page from endeca
    like :
    in exp mgr i created page (/browse) and i am using reff application as a Discover (all handlers are OOTB only).
    Error 403--Forbidden
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.4.4 403 Forbidden
    The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
    Thank you.

    Hi ,
    The problem might be with the ATG configuration.
    Please locate DAF\Endeca\Assembler\config\config\atg\endeca\assembler\cartridge\manager in ATG application.
    Use layering to add these files at same location i.e \atg\endeca\assembler\cartridge\manager in your localconfig :
    MdexResource_en.properties :
    $basedOn=DefaultMdexResource
    host=[app-host-name]
    #eg host=localhost
    port=[live-dgraph-port]
    #eg port=15000
    WorkbenchContentSource.properties :
    $class=atg.nucleus.GenericReference
    $scope=request
    loggingInfo=false
    useRequestNameResolver=true
    workbench.app.name=[endeca-app-name]
    #eg- workbench.app.name=ATGen
    workbench.host=[endeca-host]
    # eg- workbench.host=localhost
    workbench.port=[Workbench-port]
    #eg workbench.port=8006
    componentPath=/atg/endeca/assembler/cartridge/manager/PerLanguageWorkbenchContentSourceResolver
    WorkbenchContentSource_en.properties :
    $basedOn=DefaultWorkbenchContentSource
    $constructor.param[1].value=[endeca-app-name]
    #eg $constructor.param[1].value=ATGen
    workbench.app.name=[Endeca-app-name]
    #eg workbench.app.name=ATGen
    workbench.host=[endeca-workbench-host]
    #eg workbench.host=localhost
    workbench.port=[endeca-workbench-port]
    #eg workbench.port=8006
    Restart the application server.
    Thanks,
    Mayank Batra
    Edited by: Waste Ideas on Mar 21, 2013 1:05 AM

  • Error in print preview in ALV report

    Hi....All,
    Good Day.
    I have developed a ALV report. It is displaying all data properly. The problem is...
    When I am pressing the print preview button... it is getting dump.
    The dump short message is....... "Field symbol has not yet been assigned".
    Hope that I will get a solution from you as previous.
    With Thanks
    Sohel

    Do you use a field for coloring a column or cell?
    If the coding is not too large it could be helpfull to post the coding as well.
    Regards,
    John.

  • Overlapping of Columns in the Print Preview of ALV Report

    Hi ,
          I have created a ALV report  which has 62 columns, when i see the print preview, the rows overlaps one another. I want a printout where no line items or rows should overlap each other. Never mind if the extra overlapped columns get truncated. Kindly help me to solve this problem.
    Regards,
    shivu

    U need to increase u201Cno. of columns fieldu201D in the Format typesu201D. For details pl. see this link.
    http://www.****************/Tutorials/ALV/Spool/width.htm
    Regards,
    Joy.

  • Data missing when Exporting or print preview from ALV report

    Hi
    I have a alv report which is showing fine but when i try to export it to say excel sheet or do print preview some of the data is missing. Can anyone tell me how to fix this. or at least point to some document that discuss this problem.
    Here is my ALV CODE
    *  CALL_ALV
    form call_alv.
    *  v_repid = sy-repid.
      perform build_field_catalog using field_tab[].
      perform build_eventtab      using events[].
      perform comment_build       using header_alv[].
      perform build_sorttab       using gt_sort[].
    *  perform build_layout.
    *  v_variant-variant = '/TEST3'.
    * Call ABAP List Viewer
      call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          i_callback_program      = v_repid
          i_callback_user_command = ''
          i_structure_name        = 'REC'
          it_fieldcat             = field_tab[]
          it_special_groups       = gt_sp_group[]
          it_sort                 = gt_sort[]
          i_save                  = v_save
          is_variant              = v_variant
          it_events               = events[]
    *      is_layout               = gd_layout
        tables
          t_outtab                 = REC
        exceptions
          program_error            = 1
          others                   = 2.
    endform.
    From my Catalog this data is missing
    * BUILD_FIELD_CATALOG
    form build_field_catalog USING pt_fieldcat type
                                   slis_t_fieldcat_alv.
      data:  ls_fieldcat type slis_fieldcat_alv.
      clear: fieldcat, pt_fieldcat[].
      ls_fieldcat-tabname        =                'REC'.
      ls_fieldcat-edit           =                ' '.
        ls_fieldcat-fieldname      =                'PERNR'.
        ls_fieldcat-seltext_s      =                'Employee #     '.
        ls_fieldcat-seltext_m      =                'Employee #           '.
        ls_fieldcat-seltext_l      =                'Employee #           '.
        ls_fieldcat-datatype       =                'C'.
        append ls_fieldcat to pt_fieldcat.
    There r coupole that's missing
    But there couple that show's up like this one
        ls_fieldcat-fieldname      =                'STIME'.
        ls_fieldcat-seltext_s      =                'ST   '.
        ls_fieldcat-seltext_m      =                'St Tm     '.
        ls_fieldcat-seltext_l      =                'Start Time          '.
        ls_fieldcat-datatype       =                'C'.
        append ls_fieldcat to pt_fieldcat.
        ls_fieldcat-fieldname      =                'ETIME'.
        ls_fieldcat-seltext_s      =                'ET      '.
        ls_fieldcat-seltext_m      =                'Et Tm           '.
        ls_fieldcat-seltext_l      =                'End Time             '.
        append ls_fieldcat to pt_fieldcat.
    I always reward points.
    Thanks

    hi Anwarul,
    Try the following code:
    *  CALL_ALV
    form call_alv.
    *  v_repid = sy-repid.
      perform build_field_catalog using field_tab[].
      perform build_eventtab      using events[].
      perform comment_build       using header_alv[].
      perform build_sorttab       using gt_sort[].
    *  perform build_layout.
    *  v_variant-variant = '/TEST3'.
    * Call ABAP List Viewer
      call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          i_callback_program      = v_repid
          i_callback_user_command = ''
          i_structure_name        = 'REC'
          it_fieldcat             = field_tab[]
          it_special_groups       = gt_sp_group[]
          it_sort                 = gt_sort[]
          i_save                  = v_save
          is_variant              = v_variant
          it_events               = events[]
    *      is_layout               = gd_layout
        tables
          t_outtab                 = REC
        exceptions
          program_error            = 1
          others                   = 2.
    endform.
    form build_field_catalog USING pt_fieldcat type
                                   slis_t_fieldcat_alv.
    call function 'REUSE_ALV_FIELDCATALOG_MERGE'
    exporting
    I_PROGRAM_NAME  = sy-repid
    I_STRUCTURE_NAME = 'REC'
    changing
    CT_FIELDCAT          = pt_fieldcat.
    When you export to excel, the character fields and numeric columns gets re-arranged, but all the fields will be displayed in this case.
    hope this helps.

  • Modification of print preview of alv report

    Dear all,
            I got a new requirement, after running CADO transaction with sel.parameters PERNR and DATERANGE  it displays alvgrid . If an enduser want to print this ALVGRID that must display sel.parameters at the top of first page.Is it possible while triggering the print to change alvreport layout.
           Please help regarding this.
    Thanks in advance

    I have the same problem, too.
    Can anyone give the solution please..?
    Thanks

  • Getting error while synchronising for the first time to get Device ID

    Hi All,
    When I am trying to synchronise for the first time to get device ID I am getting following error.
    Could any body through some light on this please.
    • Synchronization started 
    • Connection set up (without proxy) to: http://XYZ:portno/meSync/servlet/meSync?~sysid=MOB& 
    • Connection to server failed. 
    • Synchronisation problems: Transport-layer (http) sync exception raised (root cause: Exception while synchronizing (java.io.IOException: Not in GZIP format)) 
    Regards,
    Ameer Baba.

    Hi,
    please let us know what patch level your middleware is running on.
    The mobileengine.config file is placed in the MI client installation directory in subfolder settings. On PC it is in
    c:\Program files\Sap Mobile Infrastructure\settings.
    From the URL you mentioned above you are using the "old" technology. Please go the service.sap.com/instguides and follow the setup guid for the old technology.
    When you enter the URL directly into the browser you should get a LOGON popup. This shows the service is running. I would expect that you do not get this popup due to missing setup.
    If you want to use the new sync service in SICF and you have configured this. have a look into the manual. In that case you are missing some settings on the MI client. The problem is, that the old MI client uses old sync service by default.
    Regards,
    Oliver

  • Dump error while going for a change mode in MIR4 for parked document

    Hi  All,
    After doing some GR and MIRO for one PO, there was some GR qty was left and I have parked new invoice document in MIRA. If I go for change mode MIR4 for the same parked document it is going to dump error as message type unknown, saying entry is not maintained table TTXD for Tax procedure. This table indicates that Tax jurisdiction, but we are not maintaining the Tax at Jurisdiction level. I found that user has activated calculate tax in MIRA and posted with some amount, here system will not calculate the tax in Tax field because base amount is not there to calculate, so that field shows "zero". For the same parked document in MIR4 I can see some lines which has value 0 in amount & quantity(already cleared GR's for the same PO) and also GR lines.
    Can anyone tell me how can I solve this dump error, I want to delete the parked document in legal way.
    Regards
    Shanu

    Hi Shanu,
    Please extract complete dump error by T code ST22 and take a help of your ABAP Team for an analyse the possible cause of dump and also check the relevant note for resolving this dump error.
    Regards,
    Santosh

  • I paid for adobe reader to convert pfs to excel. It used to work but now it does not. I get "error while siging in message" but I am signed in. Please fix this or advise.

    Adobe no longer converts pdfs to Excel or Word. I continually get error while signing in message. But I am signed in. I paid for service and expect it to work. I can get no help form adobe. Please help now.

    Hi adoberror,
    I'm sorry that you're having trouble with ExportPDF. Can you please try the following to resolve this sign-in issue:
    Choose Edit > Preferences (Windows) or Adobe Reader > Preferences (Mac)
    Click 'Adobe Online Services' on the left-hand side
    Sign out of our Adobe ID and sign back in.
    Try to convert your document again.
    If you continue to have trouble, please verify that you can access the service via the web interface.  To do this:
    Open a browser and navigate to http://exportpdf.acrobat.com/signin.html
    Try to log in with your Adobe ID (email address) and password
    Once logged in, follow the on-screen prompts to convert a file
    Please let me know how it goes.
    Best,
    Sara

  • HT202157 New apple is not asking for the WIFI password.Home sharing is not working,i am getting Error while streaming videos from Youtube.

    I got new Apple TV 10 days back,its not asking for the WIFI password.Home sharing is not working,i am getting Error while streaming videos from Youtube.
    I can only see pics and video saved in my iphone. No other options are working.The worst part is that its not asking wifi passoword.
    Not able to connect istores and itunes.
    I cannot do software update. Can anyone help in this content?

    Thanks Brian- I am not connecting it with iphone teethering. I am using it with my DSL wifi.
    I am using it with ethernet cable then its working fine.If i am trying to use it with WIFI then its giving error.
    I tried using Netwrok testing but its giving same error.

  • I am getting error while doing MFBF for semifinisg good

    Hi,
    i am getting error while doing MFBF for semifinisg good
    Existing standard cost estimate cannot be used
    Message no. RM175
    Diagnosis
    This error appears under the following circumstances:
    The existing standard cost estimate cannot be used for backflushing activities as the repetitive manufacturing profile was not maintained correctly when the standard cost estimate was carried out.
    The standard cost estimate must come from product costing. Other cost estimates (such as base object controlling) are not possible.
    Procedure
    The repetitive manufacturing profile assigned to the material at the time of the planned cost estimate must be a profile for repetitive manufacturing with product cost collector.
    Use product costing to create the standard cost estimate.

    I had already check REM profile repetitive mfg profile final backflush w. activities.
    this particular material is semifinish material attached in BOM of finish material.
    backflush of finish good is possible but now new requirement is to do production booking for the semifinish material.
    i had assign production version , done routing and maintain REM profile,
    created material cost with quantity structure ck11n then run the costing in ck40n.
    still getting the error what else is to done to able to book this thru MFBF.

  • On my HP printer Officejet4620 I get an error message "waiting for printer to become available".  Help please?

    On my HP printer Officejet4620 I get an error message "waiting for printer to become available".  Help please?

    Restart the computer and restart the printer. If you continue to have the problem the follow the steps Apple outlines in Reset Printing System feature article.

  • Getting error while Year end closing in asset accounting for the year ...

    Hi,
        i am getting error while doing Year end closing in asset accounting for the year 2004. It is giving few assets and saying that "Depreciation not posted completely"
    Can any body help in this reagards.
    With regards,

    Dear Shree,
    Do u have the list of all such assets for which no depreciation has been posted. If yes, then go to AFAB, upload the list all these assets & then select the radio button as 'repeat'.
    This will post you depreciation for all the assets. then close the year.
    regards,
    Ajay

  • While doing PGI get error account determination for entry

    while doing PGI get error account determination for entry    not possible message no M8147

    Hello,
    Seems like you are missing entry in Trx OBYC - GBB/VAX or GBB/VAY. The long text of the error message would tell you where to maintain the entries. If that is VAX or VAY you would need to maintain the 'Cost of Goods Sold a/c there according to the valuation class.
    Kind Regards // Shaubhik

Maybe you are looking for