Getting error while using the data element in ztable

though i specified the length as 20 in dataelement when i am entering the dataelement i am getting this error
while i used help i got the following information
Number of positions < minimum number (1) for data type CHAR
Message no. DO253
Diagnosis
A minimum length is required for the specified data type.
This minimum length is not reached by the specified number of positions.
Procedure
Increase the number of positions or select a more appropriate data type with the possible entries help F4.

This is strange, you shouldn't even be able to activate the dataelement type char with a length of 0. Revisit your data element and make sure that the length shows to be greater than 0 and reactivate your data element to make sure the newest version is active. In case you are referencing a domain in your data element do the same with the domain after validating that everything is correct (you can also use the check function). Then go back to your table and reenter the data element before activating your table.
Hope that helps,
Michael

Similar Messages

Getting Error while accessing the data using odata service

Hi All,
Iam new to SAP FIORI.
Iam getting the below error while accessing the data using odata service.
"Failed to load resource: the server responded with a status of 404 (Not found)"
"No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin "
i have tried all the solutions like changing the url pattern "proxy/htttp".
and disabled - security in chrome (Chrome is Updated version).
i tried with IE still got the same problem.
And installed all the required software in eclipse
While installing GWPA plugin i got the following error.
let me know if any one have idea.
Thanks in advance.

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

Records was deleted at R/3 sys - getting error while loading the data

Hi All,
we are extracting the data from 2LIS_12_VCITM, 2LIS_11_VASCL, 2LIS_11_V_ITM, 2LIS_13_VDITM and 2LIS_11_VAITM into Cube RSD_C03. But one record (Sales Order) was deleted at R/3 system so we getting the error message that Caller 09 contains an error message while loading the data from 2LIS_12_VCITM.
we have replicate the DataSource and activate Trans rules but no use still getting the same error.
when we execute the data source 2LIS_12_VCITM at RSA3 with update mode as D (Transfer of the deltas since the last request)getting error message that Errors occurred during the extraction
and we are getting the zero records at RSA3 for the 2LIS_12_VCITM as update mode as F (Transfer of all requested data)
And getting shot dump that TSV_TNEW_PAGE_ALLOC_FAILED at BW side.
Could you kindly suggest me any one how to rectify this error.
Thanks in Advance,
Shaliny. M

hai Lilly
I activated myself source system and replicate the my datasource .
Then activate the update rules for ODS , InfoCube and InfoCube .
Then i tried to load the data into InfoCube from ODs .
Again im getting same problem .
why it is like that
pls tell me
rizwan

Getting error while importing the data using loadercli

Hello,
I want to copy the data using export/ import via (loadercli).
scenario:
1) I have 2 server and i want to export data from old server and import in to new MAXDB server using loadercli.
I have done this once and it went fine , but now I want to do the export import again so i will have te latest data on the new server.
when i tried to do that it gives error that the table already exist . Can i use loadercli to import hte data again ?
can any one help me in this ?
Regards,
Bhavesh

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

Getting error while importing the data to scsm

Hi,
We are planing to iport data from another Ticketing tools .For this i have created a .CSV and .XML .While iporting i am getting below error
And the Xml File is
================================================================
<CSVImportFormat>
<Projection Type='System.workItem.Incident.ProjectionType">
<Seed>
<Class Type="System.WorkItem.incident">
<Property ID="Id"/>
<Property ID="Source"/>
<Property ID="TierQueue"/>
<Property ID="Department"/>
<Property ID="Classification"/>
<Property ID="Title"/>
<Property ID="Urgency"/>
<Property ID="Impact"/>
<Property ID="Assignedto"/>
<Property ID="Description"/>
<Property ID="Site"/>
<Property ID="Priority"/>
<Property ID="Asset"/>
<Property ID="ChangeIncidentStatus"/>
<Property ID="CreatedDate"/>
<Property ID="ActualEndDate"/>
<Property ID="ClosedDate"/>
<Property ID="ResolutionDescription"/>
<Property ID="SharepointBug"/>
<Property ID="ClientContact:"/>
<Property ID="RequestorCategory"/>
<Property ID="CaseReason"/>
<Property ID="Prod"/>
<Property ID="ParentAccount"/>
<Property ID="CustomerSupportAccount"/>
<Property ID="Hardware"/>
<Property ID="Browser"/>
<Property ID="InternetConnection"/>
<Property ID="ProblemAffectsOthers"/>
<Property ID="IssueonDifferentWorkstation"/>
<Property ID="PatientSpecific"/>
<Property ID="SalesforceCase"/>
<Property ID="TFS"/>
<Property ID="StepstoReproduce"/>
<Property ID="RelatedPatients"/>
<Property ID="AffectedDevice"/>
<Property ID="ReasonforOnHold"/>
<Property ID="CustomerSupportAgent"/>
<Property ID="FirstResponseDate"/>
<Property ID="LastModified (Internal)"/>
<Property ID="RequiredBy"/>
</Class>
</Seed>
<Component Alias="AffectedUser">
<Seed>
<Class Type="System.Domain.User">
<Property ID="FirstName"/>
<Property ID="Domain"/>
<Property ID="UserName"/>
</Class>
</Seed>
</Component>
</Projection>
</CSVImportFormat>
=====================================================================
Please let me know that error in the xml file.
Regards, H@ri

Thanks ,I have been gone through <Projection Type='System.WorkItem.Incident.ProjectionType">.
Now i am getting many errors while importing data.I have customized fields in servicedesk and i have created same fields in scsm incident form.When i am imported
data i am getting below error.
Please let me know how can i import customized feilds data to SCSM without issues.
Regards, H@ri

Getting Error while Interfacing the Data in OM

Hi Gurus,
i am getting following error while i am running the interface in order management for interface the data into standard tables
the error is as follows
"This Customer's PO Number is referenced by another order" . This error is for the header table
"You are trying to insert an existing order or update an order that does not exist. Please enter a correct operation code. ;" . This error is for the Lines table
can anyone help me out wat is the cause and solution for it.
any inputs is highly appreciable.
thanks

Hi,
Please refer to following metalink document :
Sales Order Import Fails With Error Customer Po Number Referenced By Another Ord [ID 778895.1]
Regards,
Vikas

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Error while uploading the data using FM"upload"

Hi,
I encountering an error while uploading the data using text file with FM " UPLOAD"
The error is "File does not exist or cannot be opened "
But there is a file with name and extenstion right.
Regards
Vishnu

You have to create RC29P-IDNRK(var) using concatenate statement. Try this.
DATA: new_mark TYPE bdcdata-fnam.
CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
PERFORM bdc_field USING new_mark W_BOM-QTY

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Error while extracting the data in R/3 production system,

Hi Team,
We got the following error while extracting the data in R/3 production system,
Error 7 When Sending an IDoc R3 3
No Storage space available for extending the inter 44 R3 299
No storage space available for extending the inter R3 299
Error in Source System RSM 340
Please guide us to fix the issue

It´s very difficult to help you without knowing
- what is going to be transferred
- where you get this error
- system configuration
- actual memory usage
- operating system
- database and configuration etc. etc.etc. etc.
I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
Markus

Getting error while creating the Shopping cart.

Hi ,
I am getting error while creating the Shopping cart.
a.Error in account assignment for item 1 (Item Testing SC )
b.Duplicates of Cost Centre T10063 are defined in SRM (Item Testing SC )
Kindly provide the solutions.
Thanks,
Dev

Try the following in the ERP backend system:
Standard Hierarchy Inconsistencies
Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
Update from SAP Global support, the following was the email received:
in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
If you think that your standard hierarchy is inconsistent you can check that as following:
Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
Alternatively, you can run the report 'RKCORRH1' (TN SE38).
Run both the Hierarchy->Master data->test and the
Hierarchy->Master data->comparison.
As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
Once the above two are run, again when you go to test, the inconsistency disappears.

No data Exists error while retrieving the data from a table

Hi Everyone!
I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding this

Hi !
thanks for ur response...
I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake....

Error while using the export utility

Dear all of
I am getting the following error while using the export utility in the Oracle database 9i
I have run the catexp.sql and catrm.sql suggested by the experts in this forum. But it did not help me. Kindly help me in solving this issue.
FOLLOWING ARE THE ERROR ----------------------------
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
-----------------------------------------------------------------------------------------------------------------------------------

Can you go to this discussion please.
Re: Getting a strange error for Exp
-aijaz

ARM approval error after upgrading to SP14: Database error while using the secure store.

Dear GRC experts,
After upgrading GRC 10 to SP14, assigning manual passwords during the approval of a request, the approval process is failing.
Here is the scenario; your advice will be appreciated.
Task: Manually assign passwords to multiple systems contained in the request
Where: On the access request, go to “User System Details” tab
Issue: After approving/submitting the request, the error “Database error while using the secure store” is generated
Logs: Nothing on transactions SLG1 or ST22; however ST11 shows the error attached below:
This is the failed approval of the request:
Other scenarios executed as a workaround, and passed the password assignment this time:
The approval will work if only one password is assigned to any of the given systems. The rest of the systems get an auto-generated
password.
ARM also accepts multiple passwords when the requestor assigns passwords on the “User System Details” prior submitting a
request. The GRC admin can approve once reached for system approval.
AS FYI, “Confirm Password” is only required when creating the request but not on any other stage.
System information:
-Netweaver 7
-GRCFND_A SP14
-GRCPINW SP13
Regards,
Gustavo

SAP just delivered a note to fix this issue. The number is 2022294.

Getting Error while using CallTarget class

I am getting following error while using the CallTarget.
"Exception in thread "main" java.lang.NullPointerException
at org.apache.tools.ant.taskdefs.Ant.init(Ant.java:147)
at org.apache.tools.ant.taskdefs.CallTarget.init(CallTarget.java:85)
at org.apache.tools.ant.taskdefs.CallTarget.setTarget(CallTarget.java:150
at AntCallTarget.main(AntCallTarget.java:7)"
Can anyone please help me solve this problem.
The code where i am getting this error is
          CallTarget antCall = new CallTarget();
          antCall.setTarget("Main");

I am getting following error while using the CallTarget.
"Exception in thread "main" java.lang.NullPointerException
at org.apache.tools.ant.taskdefs.Ant.init(Ant.java:147)
at org.apache.tools.ant.taskdefs.CallTarget.init(CallTarget.java:85)
at org.apache.tools.ant.taskdefs.CallTarget.setTarget(CallTarget.java:150
at AntCallTarget.main(AntCallTarget.java:7)"
Can anyone please help me solve this problem.
The code where i am getting this error is
          CallTarget antCall = new CallTarget();
          antCall.setTarget("Main");

Getting error while using the data element in ztable

Similar Messages

Maybe you are looking for