Getting errors while creating asm disk groups
while creating disk groups on 10gR2 database on linux redhat 5.3
im getting following errors :
ERROR at line 1:
ORA-15018: diskgroup cannot be created
ORA-15031: disk specification '/dev/raw/raw4' matches no disks
ORA-15025: could not open disk '/dev/raw/raw4'
ORA-27041: unable to open file
Linux Error: 19: No such device
Additional information: 42
Additional information: 213402552
Additional information: -1079643768
ORA-15031: disk specification '/dev/raw/raw3' matches no disks
ORA-15025: could not open disk '/dev/raw/raw3'
ORA-27041: unable to open file
Linux Error: 19: No such device
Additional information: 42
Additional information: 213402552
Additional information: -1079643768
ORA-15031: disk specification '/dev/raw/raw2' matches no disks
ORA-15025: could not open disk '/dev/raw/raw2'
ORA-27041: unable to open file
Linux Error: 19: No such device
Additional information: 42
Additional information: 213402552
Additional information: -1079643768
ORA-15031: disk specification '/dev/raw/raw1' matches no disks
ORA-15025: could not open disk '/dev/raw/raw1'
ORA-27041: unable to open file
Linux Error: 19: No such device
these are contents of my initORCL.ora :
ORCL.__db_cache_size=251658240
ORCL.__java_pool_size=4194304
ORCL.__large_pool_size=4194304
ORCL.__shared_pool_size=104857600
ORCL.__streams_pool_size=0
*.audit_file_dest='/opt/oracle/product/10.2.0/db_1/admin/ORCL/adump'
*.background_dump_dest='/opt/oracle/product/10.2.0/db_1/admin/ORCL/bdump'
*.compatible='10.2.0.1.0'
*.control_files='/opt/oracle/product/10.2.0/oradata/ORCL/control01.ctl','/opt/oracle/product/10.2.0/oradata/ORCL/control02.ctl','/opt/oracle/product/10.2.0/oradata/ORCL/control03.ctl'
*.core_dump_dest='/opt/oracle/product/10.2.0/db_1/admin/ORCL/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='ORCL'
*.db_recovery_file_dest='/opt/oracle/product/10.2.0/db_1/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=ORCLXDB)'
*.job_queue_processes=10
*.local_listener='LISTENER_ORCL'
*.log_archive_dest='/opt/oracle/product/10.2.0/db_1/flash_recovery_area/ORCL/archives'
*.log_archive_format='PROD_%t_%s_%r.ARC'
*.log_archive_start=TRUE
*.open_cursors=300
*.pga_aggregate_target=121634816
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=365953024
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='/opt/oracle/product/10.2.0/db_1/admin/ORCL/udump'
these are contents of init+ASM.ora
# Automatic Storage Management
# asmallow_only_raw_disks=false
# asm_diskgroups='TESTDB_DATA1'
# Default asm_diskstring values for supported platforms:
# Solaris (32/64 bit) /dev/rdsk/*
# Windows NT/XP \\.\orcldisk*
# Linux (32/64 bit) /dev/raw/*
# HPUX /dev/rdsk/*
# HPUX(Tru 64) /dev/rdisk/*
# AIX /dev/rhdisk/*
# asm_diskstring=''
# Diagnostics and Statistics
background_dump_dest=/opt/oracle/product/10.2.0/db_1/admin/+ASM/bdump
core_dump_dest=/opt/oracle/product/10.2.0/db_1/admin/+ASM/cdump
user_dump_dest=/opt/oracle/product/10.2.0/db_1/admin/+ASM/udump
# Miscellaneous
instance_type=asm
##compatible=10.1.0.4.0
compatible=10.2.0.1.0
DB_UNIQUE_NAME=+ASM
# Pools
large_pool_size=12M
# Security and Auditing
remote_login_passwordfile=exclusive
disk groups are succcesfully configured but my database is still showing old file system.
please guide
Edited by: user13376823 on Oct 22, 2012 10:35 AM
Similar Messages
-
Error while creating asm disk group
i am trying to convert my database SRAVAN as an ASM instance.
so do i need to set ORACLE_SID=+ASM???? r else it wil be SRAVAN??
I WAS ENDED UP WITH FOLLOWING ERRORS WHILE CREATING DISK GROUP.
guyz please do help me
SQL> CREATE DISKGROUP dgroup1
2 NORMAL REDUNDANCY
3 FAILGROUP ctlr1
4 DISK '/u04/app/oracle/product/asmdisks/disk1'
5 FAILGROUP ctlr2
6 DISK '/u04/app/oracle/product/asmdisks/disk2';
CREATE DISKGROUP dgroup1
ERROR at line 1:
ORA-15018: diskgroup cannot be created
ORA-15031: disk specification '/u04/app/oracle/product/asmdisks/disk2' matches
no disks
ORA-15025: could not open disk '/u04/app/oracle/product/asmdisks/disk2'
ORA-15059: invalid device type for ASM disk
Linux Error: 32768: Unknown system error
Additional information: 42
Additional information: -1073785968
ORA-15031: disk specification '/u04/app/oracle/product/asmdisks/disk1' matches
no disks
ORA-15025: could not open disk '/u04/app/oracle/product/asmdisks/disk1'
ORA-15059: invalid device type for ASM disk
Linux Error: 32768: Unknown system error
Additional information: 42
Additional information: -1073785968
[oracle@sierra200 dbs]$ cd /u04/app/oracle/product/asmdisks
[oracle@sierra200 asmdisks]$ ls -ltr
total 205008
-rwxrwxrwx 1 oracle oinstall 104857600 Jul 27 11:42 disk1
-rwxrwxrwx 1 oracle oinstall 104857600 Jul 27 11:47 disk2
Thanks & Regards
Sravan DalavaiLooks like you are asking ASM to use plain files. Have you used the Device Loopback (losetup) a d made the emulate raw devices?
http://www.idevelopment.info/data/Oracle/DBA_tips/Automatic_Storage_Management/ASM_20.shtml -
Error while creating asm disk group:::urgent
i am getting this error though i have given total path in DISK parameter.
SQL> CREATE DISKGROUP dgroup1
2 NORMAL REDUNDANCY
3 FAILGROUP ctlr1
4 DISK 'disk1'
5 FAILGROUP ctlr2
6 DISK 'disk2';
CREATE DISKGROUP dgroup1
ERROR at line 1:
ORA-15018: diskgroup cannot be created
ORA-15031: disk specification 'disk2' matches no disks
ORA-15031: disk specification 'disk1' matches no diskshi all,
thnx for ur attention i am able to solve the issue by doing the following steps...
[oracle@sierra200 product]$ su - root
Password:
[root@sierra200 root]# losetup /dev/loop1 /u04/app/oracle/product/asmdisks/disk1
[root@sierra200 root]# losetup /dev/loop1 /u04/app/oracle/product/asmdisks/disk2
ioctl: LOOP_SET_FD: Device or resource busy
[root@sierra200 root]# losetup /dev/loop1 /u04/app/oracle/product/asmdisks/disk1
ioctl: LOOP_SET_FD: Device or resource busy
[root@sierra200 root]# losetup /dev/loop2 /u04/app/oracle/product/asmdisks/disk2
[root@sierra200 root]# vi /etc/sysconfig/rawdevices
# raw device bindings
# format: <rawdev> <major> <minor>
# <rawdev> <blockdev>
# example: /dev/raw/raw1 /dev/sda1
# /dev/raw/raw2 8 5
/dev/raw/raw1 /dev/loop1
/dev/raw/raw2 /dev/loop2
[root@sierra200 root]# /etc/init.d/rawdevices start
Assigning devices:
/dev/raw/raw1 --> /dev/loop1
/dev/raw/raw1: bound to major 7, minor 1
/dev/raw/raw2 --> /dev/loop2
/dev/raw/raw2: bound to major 7, minor 2
done
[root@sierra200 root]# chown oracle:dba /dev/raw/raw1
[root@sierra200 root]# chown oracle:dba /dev/raw/raw2
[root@sierra200 root]# chmod 660 /dev/raw/raw1
[root@sierra200 root]# chmod 660 /dev/raw/raw2
[root@sierra200 root]# exit
logout
shut the instance and make the disk string as '/dev/raw/raw*'
and then create spfile from pfile. and then nomount the instance.
SQL> CREATE DISKGROUP dgroup1
2 NORMAL REDUNDANCY
3 FAILGROUP ctlr1
4 DISK '/dev/raw/raw1'
5 FAILGROUP ctlr2
6 DISK '/dev/raw/raw2';
Diskgroup created.
SQL> select name, state,total_mb,free_mb,path from v$ASM_DISK;
NAME STATE TOTAL_MB FREE_MB
PATH
DGROUP1_0001 NORMAL 100 50
/dev/raw/raw2
DGROUP1_0000 NORMAL 100 50
/dev/raw/raw1
Regards,
Sravan -
Error while creating MV replication group object
Hi,
I am getting error while creating replication group object. I tried to create using OEM and SQLPlus
OEM error
This error while creating M.V. rep. group object
There is a table or view named SCOTT.EMP.
It must be dropped before a materialized view can be created.
In SQLPLUS
SQL> CONNECT MVIEWADMIN/MVIEWADMIN@SWEET
Connected.
SQL>
SQL> BEGIN
2 DBMS_REPCAT.CREATE_MVIEW_REPOBJECT (
3 gname => 'SCOTT',
4 sname => 'KARTHIK',
5 oname => 'emp_mv',
6 type => 'SNAPSHOT',
7 min_communication => TRUE);
8 END;
9 /
BEGIN
ERROR at line 1:
ORA-23306: schema KARTHIK does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
ORA-06512: at "SYS.DBMS_REPCAT", line 1332
ORA-06512: at line 2
Please not already I have created KARTHIK schema.Arthik,
I think I know what may have happened.
As I can see you are trying to create support for an updateable materialized view.
You have to make sure the name of the schema that owns the materialized view is the same as the schema owner of the master table (at master site).
From the code you have shown, I bet the owner of table EMP is SCOTT.
From the other hand, you want to create materialized view EMP_MV under schema KARTHIK that refers to table SCOTT.EMP at master site.
According to the documentation, the schema name used in DBMS_REPCAT.CREATE_MVIEW_REPOBJECT must be same as the schema that owns the master table.
Please check the documentation at the link below
http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rarrcatpac.htm#i109228
I tried to reproduce your example in my environment, and I got exactly the same error which actually confirms my assumption that the reason for the error is the fact that you tried to create the materialized view in a schema with different name than the one where master table exists.
I'll skip some of the steps that I used to create the replication environment.
I have two databases, DB1.world and DB2.world
On DB2.world I will generate replication support for table EMP which belongs to user SCOTT
SQL> conn scott/*****@DB2.world
Connected.
SQL>create materialized view log on EMP with primary key;
Materialized view log created.
SQL>
SQL>conn repadmin/*****@DB2.world
Connected.
SQL>BEGIN
2 DBMS_REPCAT.CREATE_MASTER_REPGROUP(
3 gname => 'GROUPA',
4 qualifier => '',
5 group_comment => '');
6* END;
PL/SQL procedure successfully completed.
SQL>BEGIN
2 DBMS_REPCAT.CREATE_MASTER_REPOBJECT(
3 gname => 'GROUPA',
4 type => 'TABLE',
5 oname => 'EMP',
6 sname => 'SCOTT',
7 copy_rows => TRUE,
8 use_existing_object => TRUE);
9* END;
10 /
PL/SQL procedure successfully completed.
SQL> BEGIN
2 DBMS_REPCAT.GENERATE_REPLICATION_SUPPORT(
3 sname => 'SCOTT',
4 oname => 'EMP',
5 type => 'TABLE',
6 min_communication => TRUE);
7 END;
8 /
PL/SQL procedure successfully completed.
SQL>execute DBMS_REPCAT.RESUME_MASTER_ACTIVITY(gname => 'GROUPA');
PL/SQL procedure successfully completed.
SQL> select status from dba_repgroup;
STATUS
NORMAL Now let's create updateable materialized view at DB1. Before that I want to let you know that I created one sample in DB1 user named MYUSER. MVIEWADMIN is Materialized View administrator.
SQL>conn mviewadmin/****@DB1.world
Connected.
SQL> BEGIN
2 DBMS_REFRESH.MAKE(
3 name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4 list => '',
5 next_date => SYSDATE,
6 interval => '/*1:Hr*/ sysdate + 1/24',
7 push_deferred_rpc => TRUE,
8 refresh_after_errors => TRUE,
9 parallelism => 1);
10 END;
11 /
PL/SQL procedure successfully completed.
SQL> BEGIN
3 DBMS_REPCAT.CREATE_SNAPSHOT_REPGROUP(
5 gname => 'GROUPA',
7 master => 'DB2.wolrd',
9 propagation_mode => 'ASYNCHRONOUS');
11 END;
12 /
PL/SQL procedure successfully completed.
SQL>conn myuser/*****@DB1.world
Connected.
SQL>CREATE MATERIALIZED VIEW MYUSER.EMP_MV
2 REFRESH FAST
3 FOR UPDATE
4 AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
5* FROM [email protected];
Materialized view created.
SQL>conn mviewadmin/******@DB1.world
Connected.
SQL> BEGIN
2 DBMS_REFRESH.ADD(
3 name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4 list => 'MYUSER.EMP_MV',
5 lax => TRUE);
6 END;
7 /
PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
SQL> BEGIN
2 DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
3 gname => 'GROUPA',
4 sname => 'MYUSER',
5 oname => 'EMP_MV',
6 type => 'SNAPSHOT',
7 min_communication => TRUE);
8 END;
9 /
BEGIN
ERROR at line 1:
ORA-23306: schema MYUSER does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
ORA-06512: at "SYS.DBMS_REPCAT", line 1332
ORA-06512: at line 3 I reproduced exactly the same error message.
So the problem is clearly in the schema name that owns the materialized view.
Now lets see if what would happen if I create the MV under schema SCOTT which has the same name as the schema on DB2.world where the master table exists.
SQL>conn scott/****@DB1.world
Connected.
SQL>CREATE MATERIALIZED VIEW SCOTT.EMP_MV
2 REFRESH FAST
3 FOR UPDATE
4 AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
5* FROM [email protected];
Materialized view created.
SQL>conn mviewadmin/******@DB1.world
Connected.
SQL> BEGIN
2 DBMS_REFRESH.ADD(
3 name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4 list => 'SCOTT.EMP_MV',
5 lax => TRUE);
6 END;
7 /
PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
SQL> BEGIN
2 DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
3 gname => 'GROUPA',
4 sname => 'SCOTT',
5 oname => 'EMP_MV',
6 type => 'SNAPSHOT',
7 min_communication => TRUE);
8 END;
PL/SQL procedure successfully completed.As you can see everything works fine when the name of the schema owner of the MV at DB1.world is the same as the schema owner of the master table at DB2.world .
-- Mihajlo
Message was edited by:
tekicora -
Fiori Error while creating catalog and Group in Fiori Launchpad
Hi ,
We are getting following error while creating Catalog and Groups in Fiori Launchapd:
Error (500, Internal Server Error) in OData response for GET "/sap/opu/odata/UI2/TRANSPORT/CustomizingRequests?$filter=isDefaultRequest%20eq%20true": HTTP request failed
Details: Model 'ZTRANSPORT_MODEL_0001_BE' contains errors. Contact Adminstrator
Regards,
Trilochan
Message was edited by: Michael ApplebyHi Trilochan,
Have you assigned transport request? Select the config icon at right top.
Creating Transport Requests for User Changes - User Interface Add-On for SAP NetWeaver - SAP Library
Also look at SAP Fiori - UI Add-on SP09 update troubleshooting
Regards, Masa
SAP Customer Experience Group - CEG -
Error while creating the product group by MC84
Hello Friends,
I am creating the product group by MC84, and in product group field i have given the product group name i.e P2345, and its description i.e product group for waluj, plant i.e cw01 and Base unit i.e KG.Now when i press enter system is throwing the error"The field is defined as the required field;it doesnot contain an entry."Message no.MG144.And with this error system is placing the cursor on product group field.As i have already given product group name than also system is throwing the error.
Though i know the alternative method to create product group by MMO1 and selecting the material type PROD, then also i want to know why system is throwing the error while creating the product group by MC84.
Please guide.Dear,
This message says that you have not entered a mandatory field.Enter proper values for all mandatory fields and then you will not get this error.
Try to create the product group as material of material type"PROD"
Then you go on adding the memebers in SOP Transaction.
In some of the versions of SAP it is the problem.
I have also faced this problem in some versions.
Regards,
R.Brahmankar -
Create ASM Disk Groups cannot see Disk Path to select during installation
Hello Guys,
I am setting up 2 node RAC on 11gR2 and Linux.
I have configured all the pre-installation steps that are required to run Grid Setup as per my understanding.
I have configure SAN partitions using multipath.
I can see my SAN volume when i query multipath -l
Then i configured the raw partitions by oracleasm. Configured and then created mount points:
/dev/oracleasm/disks/
CRSVOL1 DATAVOL1 FRAVOL1
Later on I created the disks using oracle asm command:
/usr/sbin/oracleasm createdisk CRSVOL1 /dev/mapper/racdbp1 and so on...
I have run /usr/sbin/oracleasm scandisks
Cleaning any stale ASM disks...
Scanning system for ASM disks...
And when i list disk with command /usr/sbin/oracleasm listdisks
it shows the disk like this on both nodes:
CRSVOL1
DATAVOL1
FRAVOL1
BUT during the installation screen when it comes to create ASM Disk Groups It shows nothing in the add disk frame, I cant select the volumes I can list, like i did above.
Any hint please?
Thanks, ImranThanks but my problem is very specific. I feel that i have performed all the necessary steps to get complete the step i discussed above. As per different commands all is set. But i am unable to see Disks and Disks Paths during the installation screen. This is another output to verify if the installe user have rights on the asm devices:
[grid@racnode1 mapper]$ cd /dev/oracleasm/disks/
DATAVOL1 ETSCRS1 ETSVOT1 ETSVOT3 FRAVOL1
ETSASM1 ETSCRS2 ETSVOT2 EXTRADM
[grid@racnode1 mapper]$ cd /dev/oracleasm/disks/
[grid@racnode1 disks]$ ls -ltr
total 0
brw-rw---- 1 grid asmadmin 8, 1 Oct 2 16:47 ETSASM1
brw-rw---- 1 grid asmadmin 8, 5 Oct 2 16:47 DATAVOL1
brw-rw---- 1 grid asmadmin 8, 6 Oct 2 16:47 FRAVOL1
brw-rw---- 1 grid asmadmin 8, 7 Oct 2 16:47 ETSVOT1
brw-rw---- 1 grid asmadmin 8, 8 Oct 2 16:47 ETSVOT2
brw-rw---- 1 grid asmadmin 8, 9 Oct 2 16:47 ETSVOT3
brw-rw---- 1 grid asmadmin 8, 10 Oct 2 16:47 ETSCRS1
brw-rw---- 1 grid asmadmin 8, 11 Oct 2 16:47 ETSCRS2
brw-rw---- 1 grid asmadmin 8, 13 Oct 2 16:47 EXTRADM
I will appreciate if you can help me to get through this step... Is there anything else needs to be verified?
Regards, Imran -
Getting error while creating the variable of Schema Element type
Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho -
Getting Error while creating Genric Datasource
Hi,
I was try to create genric extracter where i was getting error
While creating view genric extracter where i am getting error "Entry A ZV_ZFRT does not exist in DD02L - check your entry".
My requirement is need to create extracter which is getting populated from three modules like SD,MM,FI/CO.From these three module i am using several tables and some of the tables don't have relation btween these tables as like foreign key and refrence key.
Which extracter i need to create as given scenario?
Does view will fullfill with my requirement or any other extracter.
Please some one can help me in this scenario.
Answer would be great appreciate.Hi,
Rather than writing a program write a function module. Create a structure and include all the necessary fields in the structure. Then in the function module write the logic to extract the values for those fields. While creating the datasource specify the function module and structure name.
Refer this link:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Hope this helps.
PB -
Getting error while creating the Shopping cart.
Hi ,
I am getting error while creating the Shopping cart.
a.Error in account assignment for item 1 (Item Testing SC )
b.Duplicates of Cost Centre T10063 are defined in SRM (Item Testing SC )
Kindly provide the solutions.
Thanks,
DevTry the following in the ERP backend system:
Standard Hierarchy Inconsistencies
Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
Update from SAP Global support, the following was the email received:
in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
If you think that your standard hierarchy is inconsistent you can check that as following:
Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
Alternatively, you can run the report 'RKCORRH1' (TN SE38).
Run both the Hierarchy->Master data->test and the
Hierarchy->Master data->comparison.
As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
Once the above two are run, again when you go to test, the inconsistency disappears. -
Getting error while creating users in Peoplesoft
Have a good day
new fresh instance installed , getting error while creating users in peoplesoft
SQL ERROR FUNCTION SQLExec
ERROR POSISTION 52
RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
pswdreqspecial pswdreqlower
PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS>
RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
pswdreqspecial pswdreqlower
PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS
>
How is it possible that the first statement has ALLOWDOPRID column that does not exist, where as the original statement has ALLOWOPRID which does exist?
How is it possible that the second original statement has two more errors:
PSWDREQUPPERS should be PSWDREQUPPER
FORM should be FROM.
Please provide the actual error which is being raised, without editing.
Hakan -
Can not find disks when creating ASM disk group (11.0.2.3 on OEL 6)
Hi
I`m trying to install 11.0.2.3 Grid on OEL6.
Every thing is fine until it prompt to ask where I want to put OCR and VOTING DISK. I choose to put them in ASM. So it prompt another window to ask create ASM DISK GROUP.
In this window there was an area called "add disk". There suppose to be some disks listed in this area to chose. But in my case, nothing here. I can not chose disks to add to ASM DISK GROUP.
Below are descriptions of my installation.
Oracle Grid 11.0.2.3
OEL 6 as the platform.
I use two nodes mounting the same NFS. I created some zero-padded files on the NFS directory as the ASM DISKS. (This disks should be showing the the area above)
I install everything using only one account oracle. The group is oinstall and dba
Edited by: Kramer on Jun 5, 2013 8:52 PMWell as i see your asm_diskstring could be the problem. ASMlib would have been there isnt it , I would want you to stick to default value and then try also I would suggest you to once post the output of the following and lets see whats happening
[root@ora ~]# /etc/init.d/oracleasm scandisks
[root@ora ~]# /etc/init.d/oracleasm listdisks
[root@ora ~]# ls -ltr /dev/oracleasm/disks/* -
Error While creating a Product Group
Dear All;
When running MRP, we would like to run it for specific materials only.
To do so, we need to group the materials in product groups.
While creating a product Group using T.code MC84, i get an error message
"The field is defined as a required field; it does not contain an entry
Message no. MG144"
Kindly advise me on how to resolve this.
Regards;
Richard.Hi,
Refer below OSS note:
Note 621753 - MC84: Error message when creating product group & it's related ones.
Regards,
Ram -
Error while creating a product group--Batch input error 9
Hi,
While creating a product group in T-code MC84, getting the error message" Product group can not be created (Batch input error 9)". Would appreciate providing yr help to resolve above issue.
Thks,
NileshHi Neel,
As ponited by you, the material type "PROD" is realted with creation of product group.I am able to resolve the error, "actually the work schedulling & MRP views were not activated for "PROD" resulting in the above error.
Thks for yr help.
Regards,
Nilesh -
Problem with create asm disk group
Hi all
I am about configuring ASM, so I have downloaded the Grid infrastructure 11g (32 bit), I have configured and created parameters and directories.
I runned the installer but get stack at the 3 step where I have to change the discovery path. I have taped as path /dev where I have created 3 partitions sdb1, sdc1 and sdd1.
Is there any thing should I perform on partitions may be or parameters to set before I go through the installation?
Thanks for helpYou can use the below link to install ASMLIB:
http://gssdba.wordpress.com/category/asm/
REFERANCE : Doc ID 580153.1
There are two different methods to configure ASM on Linux:
ASM with ASMLib I/O: This method creates all Oracle database files on raw block devices managed by ASM using ASMLib calls. RAW devices are not required with this method as ASMLib works with block devices.
ASM with Standard Linux I/O: This method creates all Oracle database files on raw character devices managed by ASM using standard Linux I/O system calls. You will be required to create RAW devices for all disk partitions used by ASM.
You can download the ASMLIB rpm’s from below URL:
http://www.oracle.com/technetwork/server-storage/linux/downloads/rhel5-084877.html
STEP 01: LOG IN AS ROOT USER AND INSTALL THE RPMS
[root@node1 ASMLIB]# rpm -Uvh oracleasm-2.6.18-164.el5-2.0.5-1.el5.i686.rpm \
> oracleasmlib-2.0.4-1.el5.i386.rpm \
> oracleasm-support-2.1.8-1.el5.i386.rpm
warning: oracleasm-2.6.18-164.el5-2.0.5-1.el5.i686.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
Preparing… ########################################### [100%]
1:oracleasm-support ########################################### [ 33%]
2:oracleasm-2.6.18-164.el########################################### [ 67%]
3:oracleasmlib ########################################### [100%]
STEP 02: CONFIGURE ASMLIB
[root@node1 ASMLIB]# /etc/init.d/oracleasm configure
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets (‘[]‘). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface []: oracle
Default group to own the driver interface []: dba
Start Oracle ASM library driver on boot (y/n) [n]: y
Scan for Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: done
Initializing the Oracle ASMLib driver: [ OK ]
Scanning the system for Oracle ASMLib disks: [ OK ]
STEP 03 :CREATE ASM DISK
[root@node1 ASMLIB]# /etc/init.d/oracleasm listdisks
[root@node1 ASMLIB]#
[root@node1 ~]# /etc/init.d/oracleasm createdisk VOL1 /dev/sdb1
Marking disk “VOL1″ as an ASM disk: [ OK ]
[root@node1 ~]# /etc/init.d/oracleasm createdisk VOL2 /dev/sdc1
Marking disk “VOL2″ as an ASM disk: [ OK ]
[root@node1 ~]# /etc/init.d/oracleasm createdisk VOL3 /dev/sdd1
Marking disk “VOL3″ as an ASM disk: [ OK ]
[root@node1 ~]# /etc/init.d/oracleasm createdisk VOL4 /dev/sde1
Marking disk “VOL4″ as an ASM disk: [ OK ]
[root@node1 ~]# /etc/init.d/oracleasm createdisk VOL5 /dev/sdf1
Marking disk “VOL5″ as an ASM disk: [ OK ]
[root@node1 ~]# /etc/init.d/oracleasm listdisks
VOL1
VOL2
VOL3
VOL4
VOL5
[root@node1 ~]#
Maybe you are looking for
-
What is the ICC Profile Box
-
Intrastat for goods movement between two plants
Dear All I have question need your help. Now we have two plants located in different countries, one plant is in NL (Netherlands), another plant is in DE (Germany). And we transfer stock from NL to DE in SAP by MIGO(301). But actually this belongs to
-
JavaDB / Apache Derby equivalent to the SQL Server IsNull and Oracle nvl
Firstly, if questions for JavaDB are supposted to go somewhere else, sorry for posting in the JDBC section, but I couldn't find a specific section for it. I'm trying to add support for Apache Derby to a piece of software that already has support for
-
BPC 7.5 NW SP 4 - ERRORVALIDATION SCRIPT LOGIC WITH PROGRAM CURR_CONVERSION
Hi Gurus I´m copying script logic for currency conversion for consolidation application, but when I want to validate this code *RUN_PROGRAM CURR_CONVERSION *ENDRUN_PROGRAM the system generate this error "run program error, message number:"" is very s
-
Hi I am New to NetWeaver I am facing a problem which has stopped out development When we try to build our ISA Application some thing is changing the .classpath it deletes all the jar entries so I am getting lots of compilation errors our original .cl