JavaDB / Apache Derby equivalent to the SQL Server IsNull and Oracle nvl

Firstly, if questions for JavaDB are supposted to go somewhere else, sorry for posting in the JDBC section, but I couldn't find a specific section for it.
I'm trying to add support for Apache Derby to a piece of software that already has support for Oracle, SQL Server and MySQL. There is a lot of DB specific coding involved to get the best performance possible. Several of these queries involve checking to see if a nested query returns a value and substituting 0 if no rows are returned.
In Oracle the function is called: nvl
In SQL Server the function is called: IsNull
In MySQL the function is called: IfNull
I can't find an equivalent for Derby. Does one exist?

NULLIF
http://db.apache.org/derby/docs/10.2/ref/rrefcasenullif.html

Similar Messages

How do SQL server 2000 and Oracle linked?

Hi,
How do SQL server 2000 and Oracle linked?
Thanks in Advance
Baloch.

use the like to setup ODBC and datasource
http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
and then create link server in sql server after you test conenction with oracle

More Guru Winners for February 2015 in the SQL Server category and many others!

It's been a busy week that also saw the
TECHNET WIKI SUMMIT 2015
Then we had the results for
February's TechNet Guru competition ALSO posted!
http://blogs.technet.com/b/wikininjas/archive/2015/03/19/technet-guru-february-2015.aspx
Below is a summary of the medal winners for December. The last column being a few of the comments from the judges.
Unfortunately, runners up and their judge feedback comments had to be trimmed from THIS post, to fit into the forum's 60,000 character limit, however the full version is available on TechNet Wiki in the link above.
Some articles only just missed out, so we may be returning to discuss those too, in future blogs.
BizTalk Technical Guru - February 2015
Steef-Jan Wiggers
BizTalk Server 2013 R2 Instrumenting a custom pipeline component with ETW
Mandi Ohlinger: "Always a fan of helping our custom pipeline users. Great addition to this group."
Sandro Pereira: "Images, format, descriptions, code and topic are excellent once again good work Steef-Jan."
Vignesh Sukumar
BizTalk BAM (Business Activity Monitoring)
Sandro Pereira: "Great job on this article! Well explained and nice pictures, however the article format need to be improved and some proofreading is need"
Mandi Ohlinger: "Welcome to the 'I heart BAM' fan club. Nice job on this topic. A MUST read for new-to-BAM users. "
Steef-Jan Wiggers
BizTalk Server 2013 R2 Instrumenting BAM Activity Tracking with ETW
Sandro Pereira: "Images, format, descriptions, code and topic are excellent once again good work Steef-Jan."
Mandi Ohlinger: "ETW for BAM Activities - LOVE it. Nice use of the Framework. "
Forefront Identity Manager Technical Guru - February 2015
Wim Beck
FIM2010: Filter objects on export
PG: "Simple, targeted but nice article, nice layout. "
Søren Granfeldt: "Nice. Would be perfect with a complete code sample."
Microsoft Azure Technical Guru - February 2015
saramgsilva
Azure Mobile Services: How to see the log files in server
JH: "Log files are one of the most important things in a production environment. This article shows hows you can do that for the Azure Mobile Services in a nice and easy way."
Alan Carlos: "Great article!"
Ed Price: "Very useful topic! These are a great set of articles!"
saramgsilva
Azure Mobile Services: How to see the WebConfig file published
Ed Price: "Great detail and fantastic use of images! I love all the in-line links!"
JH: "Sometimes it is hard to tell when working in a multi-environment what configuration was published to the Server. The article shows short and easy how to do that for the Azure Mobile Services."
Miscellaneous Technical Guru - February 2015
Arleta Wanat
Retrieve all site mailboxes in your Office 365 tenant
Durval Ramos: "This article has a well content, images and code that help to understand the solution. It has References and was Translated into more two languages. Good job!"
Richard Mueller: "Good links. A great tutorial."
Andy ONeill
Silverlight: No Need to BringIntoView
Durval Ramos: "A well formatted article is easier and more pleasant to read. This script is useful"
Richard Mueller: "Good demonstration of a new feature."
Chen V
PowerShell : Enable Auto Reply for Shared Mail Box
Durval Ramos: " A good solution originated of TechNet Forum. The script and images make it easy to understand and ensure you get the best interest to reader."
Richard Mueller: "Good documentation of this feature."
SharePoint 2010 / 2013 Technical Guru - February 2015
Geetanjali Arora
SharePoint Online : Performing Batch Operations using REST API
KB: "Very well explained article on a new and much awaited feature. Although Andrew Connell already explained this topic in several posts, this article still contains added value."
Ed Price: "I love the History section. The formatting is amazing. And the References and See Also sections at the bottom are great icing on the cake. This is an important topic that's done incredibly well!"
Matthew Yarlett
Using the SpellCheck Webservice with the TinyMCE Richtext Editor and
AngularJS in Office 365
KB: "I read this article with growing interest, it contains a lot of added value. Very well and in-depth explanation. "
Ed Price: "Great scenario! Good use of images, code, detail, and References! Could possibly use a greater breakdown and explanation of the code. This article just gets more and more interesting and valuable as you read it! Great job!"
Arleta Wanat
SharePoint Online: Turn on support for multiple content types
in a list or library using Powershell
KB: "Really nice, interesting and detailed article!"
Ed Price: "The Content Types section helps explain this a lot! I also love the downloads at the end. What a fantastic resource!"
Small Basic Technical Guru - February 2015
Nonki Takahashi
Small Basic: Key Input
Michiel Van Hoorn: "Great improvement."
RZ: "Very nice explanation and examples of key input handling"
Ed Price - MSFT
Small Basic: The History of the Logo Turtle
RZ: "Turtle (Logo) was the first programming language for many, including perhaps some of the Small Basic prorammers. Nice article explaining the history."
Michiel Van Hoorn: "A nice background article and hopefull inspiration for those who want to start in robotics"
Nonki Takahashi
Small Basic: TechNet Wiki Article List
Michiel Van Hoorn: "This is great! Perfect as a local cache of the articles. "
RZ: "A good example"
SQL BI and Power BI Technical Guru - February 2015
Sylvain PONTOREAU
PowerBI API in .Net
RB: "Great walkthrough. Looking forward for the WP8 version of the app ;)"
PT: "Sylvain, very nice job with this. This is a timely topic about an emerging product that has great potential. This is a very good example of a well-written post on an interesting subject with enough information to be valuable to a
solution developer. I will personally take time to explore the Power BI API and use your examples. "
SQL Server General and Database Engine Technical Guru - February 2015
Ronen Ariely
SQL Server Books Online
AM: "Thank you for sharing this with us. It is quite informative and let us get familiar with BOL after the change from previous versins."
Ed Price: "Nice! A very helpful introduction to Books Online! It also tells my technical writer friends that their hard work is appreciated! =^)"
Durval Ramos
How to Collect Events and Errors on SQL Server
Ed Price: "Fantastic solution! A great resource that's amazingly well written with formatting, clear parameters, images, References, and a See Also section! And it even comes in Portuguese! Great article!"
AM: "Thank you for sharing this with us. A good source to learn about our SQL Server instances. "
System Center Technical Guru - February 2015
MarkusEliasson
Troubleshoot ID 32008: DPM cannot
protect this SharePoint farm...
Ed Price: "An important topic that's very clear with great formatting and a good use of an image!"
t.c.rich
Managing Priorities of Client Polices and A/V Policies in SCCM
Ed Price: "I love the descriptions, breakdown of sections, and code formatting! Great article!"
Mr X
How to copy SMSTS.log when a Task Sequence fails in SCCM
Ed Price: "A very helpful table and a good contribution to the community! Mr X again thinks of important content gaps to fill!"
Transact-SQL Technical Guru - February 2015
Saeid Hasani
T-SQL: How the Order of Elements in the ORDER BY Clause Implemented in the Output Result
Durval Ramos: "Very well structured and with examples that clarify how a T-SQL statement can change the data output order."
Richard Mueller: "Good use of Wiki guidelines and great examples."
Ronen Ariely
Free E-Books about SQL and Transact-SQL languages
Richard Mueller: "An excellent collection and a great idea."
Durval Ramos: "A good initiative. Very useful !!!"
Ricardo Lacerda
Declare Cursor (Transact-SQL) versus Window with Over - Running Totals
- Accumulated Earnings
Durval Ramos: "The "Window function" sample was well presented, but it was unclear how the chart was generated."
Richard Mueller: "A new idea that can be very useful. Grammar needs work"
Visual Basic Technical Guru - February 2015
Emiliano Musso
Genetic algorithm to solve 2D Mazes in Visual Basic
MR: "Great article! Love to see an application for AI in a simple game"
Durval Ramos: "This article is well documented with images and your code clarifying important details. It also has References, a very useful video and your project available for download in "MSDN Code" !"
Richard Mueller: "Incredible concept and code. Grammar needs work."
Paul Ishak
MultiHeadedTrackBar Control
Durval Ramos: "Very interesting article, with methods and properties well documented. Your project was available in "MSDN Code" which facilitates the understanding of solution."
Richard Mueller: "Amazing work. Extensive code but with lots of comments. Needs a TOC"
tommytwotrain
Using Trigonometry to draw graphic curves in VB.NET part 2.
MR: "Great continuation. Love the usage of the code for circle text"
Durval Ramos: "The article is interesting, but It's need to work better commenting about assemblies referenced on project and also structure your content into sections."
Richard Mueller: "Good tutorial and example code demonstrating basic concepts. Avoid first person."
Visual C# Technical Guru - February 2015
Magnus (MM8)
C#: Enumerating collections that change
Jaliya Udagedara: "Great article. Has a thorough and to the point explanation of problem and the solution with code samples. Loved it!"
Carmelo La Monica: "Very useful and exhaustive about errors at runtime in these circumstances. Congratulations"
Andy ONeill
c#: Practical Poly
Carmelo La Monica: "Fantastic artcle. Very detailed and exhaustive, congratulations ."
Jaliya Udagedara: "Definitely worth reading this. Explains somewhat advance topic along with a fundamental concept of programming. "
Wiki and Portals Technical Guru - February 2015
Durval Ramos
Wiki: Microsoft Short URLs Personalized by SXP
PG: "Nice idea, lots of potential to grow, really needs some more community attention."
Richard Mueller: "An excellent idea. Good use of Wiki guidelines."
Windows Phone and Windows Store Apps Technical Guru - February 2015
Carmelo La Monica
Windows Phone 8: control Nokia Maps (Part 3)
JH: "Part 3 of the series how to work with the Nokia maps control. As the previous articles this one contains a lot of code snippets and some pictures. Good work!"
Ed Price: "A great topic, a fantastic breakdown of sections with clear descriptions, and a nice mix of code formatting and helpful images! Another stellar article from Carmelo! Great job including the link back at the end to the portal
article!"
Windows PowerShell Technical Guru - February 2015
Richard Mueller
Document Your Active Directory Organization
Alan Carlos: "Wow! Great article, congratulations!!! Very detailed!"
Chen V: "Excellent Article - I liked return to top as well."
Ed Price: "Wow! It's like a professional whitepaper! It's a valuable topic that's done with intricate detail! I love the images, diagrams, code blocks, and it ends very well with more resources and Wiki articles! The article just keeps
digging deeper and deeper! Awesome job on this!"
DexterPOSH
PowerShell + REST API : Invoke-RestMethod Gotcha
Chen V: "Good Article. TOC might have made this more rich! "
Ed Price: "This is a good topic with some great content. It could benefit from sections and a TOC, as well as a References and See Also sections at the end. The inline links are helpful. Could "
DexterPOSH
PowerShell Trick : Search & highlight text in MS Word
Ed Price: "This is a great solution, with some helpful Q&A in the comments!"
Windows Presentation Foundation (WPF) Technical Guru - February 2015
Andy ONeill
Lookless Controls
KJ: "WPF can definitely be confusing when devs first encounter it. Like the way you break it down."
Ed Price: "Wow! Fantastic explanations that are very clear and deep! The images and code bring it to life!"
Andy ONeill
Only One Parent
KJ: "Same iwith this one, good 101 intro"
Ed Price: "Another great tip! I love the detail here as well! Those snippets help a lot!"
Andy ONeill
Bind to Current Item of Collection
KJ: "Feel like this topic has a lot of coverage out there, but it can't hurt to hammer on databinding yet one more time :) "
Ed Price: "Fantastic topic with great execution! Although these could benefit from References and See Also wiki sections at the end, the Inline links help a lot!"
Windows Server Technical Guru - February 2015
Mr X
Ping for Beginners
Mark Parris: "A good introduction with additional content."
JM: "Great article idea and an excellent article that will be useful to many, thanks for your contribution."
Philippe Levesque: "Good article that show a usefull utility for basic troubleshooting"
Richard Mueller
Active Directory: Get-ADFineGrainedPasswordPolicy Default and Extended Properties
Mark Parris: "An Interesting insight on FGPP and their extended properties."
JM: "This is a good piece of detailed information about this PowerShell cmdlet, thanks for sharing."
Philippe Levesque: "Great article ! Illustrating some cmdlet's output when a user got assigned policy versus a user with the default domain policy could be a good idea."
Richard Mueller
Active Directory: Get-ADServiceAccount Default and Extended Properties
Mark Parris: "A useful nugget of information."
JM: "More very useful information about an AD cmdlet, thanks!"
Philippe Levesque: "Good article !"
As mentioned above, runners up and comments were removed from this post, to fit into the forum's 60,000 character limit.
You will find the complete post, comments and feedback on the
main announcement post.
Please join the discussion, add a comment, or suggest future categories.
If you have not yet contributed an article for this month, and you think you can write a more useful, clever, or better produced wiki article than the winners above,
THERE'S STILL TIME! :D
Best regards,
Pete Laker
More about the TechNet Guru Awards:
TechNet Guru Competitions
#PEJL
Got any nice code? If you invest time in coding an elegant, novel or impressive answer on MSDN forums, why not copy it over to
TechNet Wiki, for future generations to benefit from! You'll never get archived again, and
you could win weekly awards!
Have you got what it takes o become this month's
TechNet Technical Guru? Join a long list of well known community big hitters, show your knowledge and prowess in your favoured technologies!

Congrats to Ronen and Durval!
SQL Server General and Database Engine Technical Guru - February 2015
Ronen Ariely
SQL Server Books Online
AM: "Thank you for sharing this with us. It is quite informative and let us get familiar with BOL after the change from previous versins."
Ed Price: "Nice! A very helpful introduction to Books Online! It also tells my technical writer friends that their hard work is appreciated! =^)"
Durval Ramos
How to Collect Events and Errors on SQL Server
Ed Price: "Fantastic solution! A great resource that's amazingly well written with formatting, clear parameters, images, References, and a See Also section! And it even comes in Portuguese! Great article!"
AM: "Thank you for sharing this with us. A good source to learn about our SQL Server instances. "
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

JDBC to access SQL server 2000 and Oracle.

hi,
I have the following requirement. I have an oracle database which contain sql data including BLOB and CLOB. Firstly, I should migrate the data to a SQL server 2000 database. That is, i should be able to have two databases, one on oracle and the other on sql server 2000. the two databases should contain the same data, which includes BLOB data. I guess, sql server 2000 does not have a BLOB data type. What is the equivalent data type i can use to save the Oracle's BLOB data in SQL server?? Should it be image type?
After i migrate the data to the sql server 2000 database, i should be able to connect to the two databases, oracle and sql server 2000, using the same JDBC code to retrieve, insert, update and delete the data. What are the drivers that i should use. I guess, the MS JDBC driver does not support BLOB and CLOB. Is there a driver that can support BLOB for sql server 2000 and is also free???!
Kindly help... Thanks.
Arthi.

Hi,
I am new to jdbc... so, pls forgive my ignorance...
I shall try to map a BLOB data column in oracle to an IMAGE data column in sql server 2000. I am using oracle jdbc driver and microsoft's jdbc driver for connecting to the databases.
My question is, can i use setBlob() method in the preparedstatement in jdbc code for setting data to the sql server 2000 image column?
rs.getBlob() and preparedstatement.setBlob()code works fine for oralce's BLOB column using oracle's jdbc driver.... Will the same jdbc code work for sql server 2000's image column using microsoft's jdbc driver??
Kindly help.
Arthi.

Memory leak issue with link server between SQL Server 2012 and Oracle

Hi,
We are trying to use the linked server feature with SQL Server 2012 to connect SQL server and Oracle database. We are concerned about the existing memory leak issue. For more context please refer to the link.
http://blogs.msdn.com/b/psssql/archive/2009/09/22/if-you-use-linked-server-queries-you-need-to-read-this.aspx
The above link talks about the issues with SQL Server versions 2005 and 2008, not sure if this is still the case in 2012. I could not find any article that talks about if this issue was fixed by Microsoft in later version.
We know that SQL Server process crashes because of the third-party linked server provider which is loaded inside SQL Server process. If the third-party linked server provider is enabled together with the
Allow inprocess option, the SQL Server process crashes when this third-party linked server experiences internal problems.
We wanted to know if this fixed in SQL Server 2012 ?

So your question is more of a information type or are you really facing OOM issue.
There can be two things for OOM
1. There is bug in SQL Server which is causing the issue which might be fixed in 2012
2. The Linked server provider used to connect to Oracle is not upto date and some patch is missing or more recent version is to be used. Did you made sure that you are using latest version.
What is Oracle version you are trying to connect(9i,10g, R2...)
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Does ORCALE have the Equivalent of the SQL SERVER 2K GO Statement?

Good morning Oracle Gurus,
I have an easy one for you. In SQL Server 2k you can write a "block" of SQL and then add a GO statement to the next line and then add another "block" of SQL. The GO statement will cause the first block of SQL to be executed before the second block. Is there any such statement in Oracle that will allow me to do the same thing?
Thanks in advance for you help!

As previously mentioned you can use slash "/"
SQL> insert into t
2 select *
3 from emp
4 /
14 rows created.
SQL> select *
2 from t
3 /
EMPNO ENAME      JOB          MGR HIREDATE      SAL   COMM DEPTNO
7369 SMITH      CLERK       7902 12-17-1980    800            20
7499 ALLEN      SALESMAN    7698 02-20-1981   1600    300     30
7521 WARD       SALESMAN    7698 02-22-1981   1250    500     30
7566 JONES      MANAGER     7839 04-02-1981   2975            20
7654 MARTIN     SALESMAN    7698 09-28-1981   1250   1400     30
7698 BLAKE      MANAGER     7839 05-01-1981   2850            30
7782 CLARK      MANAGER     7839 06-09-1981   2450            10
7788 SCOTT      ANALYST     7566 12-09-1982   3000            20
7839 KING       PRESIDENT        11-17-1981   5000            10
7844 TURNER     SALESMAN    7698 09-08-1981   1500      0     30
7876 ADAMS      CLERK       7788 01-12-1983   1100            20
7900 JAMES      CLERK       7698 12-03-1981    950            30
7902 FORD       ANALYST     7566 12-03-1981   3000            20
7934 MILLER     CLERK       7782 01-23-1982   1300            10
14 rows selected.Or a semi-colon ";" to end a statement
SQL> insert into t
2 select *
3 from emp;
14 rows created.
SQL> select *
2 from t;
EMPNO ENAME      JOB          MGR HIREDATE      SAL   COMM DEPTNO
7369 SMITH      CLERK       7902 12-17-1980    800            20
7499 ALLEN      SALESMAN    7698 02-20-1981   1600    300     30
7521 WARD       SALESMAN    7698 02-22-1981   1250    500     30
7566 JONES      MANAGER     7839 04-02-1981   2975            20
7654 MARTIN     SALESMAN    7698 09-28-1981   1250   1400     30
7698 BLAKE      MANAGER     7839 05-01-1981   2850            30
7782 CLARK      MANAGER     7839 06-09-1981   2450            10
7788 SCOTT      ANALYST     7566 12-09-1982   3000            20
7839 KING       PRESIDENT        11-17-1981   5000            10
7844 TURNER     SALESMAN    7698 09-08-1981   1500      0     30
7876 ADAMS      CLERK       7788 01-12-1983   1100            20
7900 JAMES      CLERK       7698 12-03-1981    950            30
7902 FORD       ANALYST     7566 12-03-1981   3000            20
7934 MILLER     CLERK       7782 01-23-1982   1300            10
14 rows selected.
SQL>

Connectivity between sql server 2000 and oracle 9i

Hi friends....
i am developing application in which i require some data from sql server2000 tables...
tell me how i can establish connection in between these 2 database and how can i transfer specific rows to oracle....tell me how it is possible to writting stored procedures in sql....or procedures in oracle.....i used DTS (data transfer scheme) but it transfer whole database ot table...but i want to transfer only specific rows in table...
help me out from it?
thanx in advance...

There are a number of ways...
You can certainly use DTS to extract a subset of rows and move them to Oracle. You'll need to define the WHERE clause when defining your DTS steps.
You can use Oracle Heterogeneous Connectivity to create a database link to SQL Server from Oracle and pull the data over via straight SQL, i.e.
INSERT INTO local_table
SELECT * FROM remote_table@sql_server_dblink WHERE extract_conditionYou can do a similar thing in SQL Server where you use linked servers to connect to Oracle from SQL Server and push the data
This list can go on, but these should get you started.
Justin

Welcome to the SQL Server Disaster Recovery and Availability Forum

(Edited 8/14/2009 to correct links - Paul)
Hello everyone and welcome to the SQL Server Disaster Recovery and Availability forum. The goal of this Forum is to offer a gathering place for SQL Server users to discuss:
Using backup and restore
Using DBCC, including interpreting output from CHECKDB and related commands
Diagnosing and recovering from hardware issues
Planning/executing a disaster recovery and/or high-availability strategy, including choosing technologies to use
The forum will have Microsoft experts in all these areas and so we should be able to answer any question. Hopefully everyone on the forum will contribute not only questions, but opinions and answers as well. I’m looking forward to seeing this becoming a vibrant forum.
This post has information to help you understand what questions to post here, and where to post questions about other technologies as well as some tips to help you find answers to your questions more quickly and how to ask a good question. See you in the group!
Paul Randal
Lead Program Manager, SQL Storage Engine and SQL Express
Be a good citizen of the Forum
When an answer resolves your problem, please mark the thread as Answered. This makes it easier for others to find the solution to this problem when they search for it later. If you find a post particularly helpful, click the link indicating that it was helpful
What to post in this forum
It seems obvious, but this forum is for discussion and questions around disaster recovery and availability using SQL Server. When you want to discuss something that is specific to those areas, this is the place to be. There are several other forums related to specific technologies you may be interested in, so if your question falls into one of these areas where there is a better batch of experts to answer your question, we’ll just move your post to that Forum so those experts can answer. Any alerts you set up will move with the post, so you’ll still get notification. Here are a few of the other forums that you might find interesting:
SQL Server Setup & Upgrade – This is where to ask all your setup and upgrade related questions. (http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/threads)
Database Mirroring – This is the best place to ask Database Mirroring how-to questions. (http://social.msdn.microsoft.com/Forums/en-US/sqldatabasemirroring/threads)
SQL Server Replication – If you’ve already decided to use Replication, check out this forum. (http://social.msdn.microsoft.com/Forums/en-US/sqlreplication/threads)
SQL Server Database Engine – Great forum for general information about engine issues such as performance, FTS, etc. (http://social.msdn.microsoft.com/Forums/en-US/sqldatabaseengine/threads)
How to find your answer faster
There is a wealth of information already available to help you answer your questions. Finding an answer via a few quick searches is much quicker than posting a question and waiting for an answer. Here are some great places to start your research:
SQL Server 2005 Books Onlinne
Search it online at http://msdn2.microsoft.com
Download the full version of the BOL from here
Microsoft Support Knowledge Base:
Search it online at http://support.microsoft.com
Search the SQL Storage Engine PM Team Blog:
The blog is located at https://blogs.msdn.com/sqlserverstorageengine/default.aspx
Search other SQL Forums and Web Sites:
MSN Search: http://www.bing.com/
Or use your favorite search engine
How to ask a good question
Make sure to give all the pertinent information that people will need to answer your question. Questions like “I got an IO error, any ideas?” or “What’s the best technology for me to use?” will likely go unanswered, or at best just result in a request for more information. Here are some ideas of what to include:
For the “I got an IO error, any ideas?” scenario:
The exact error message. (The SQL Errorlog and Windows Event Logs can be a rich source of information. See the section on error logs below.)
What were you doing when you got the error message?
When did this start happening?
Any troubleshooting you’ve already done. (e.g. “I’ve already checked all the firmware and it’s up-to-date” or "I've run SQLIOStress and everything looks OK" or "I ran DBCC CHECKDB and the output is <blah>")
Any unusual occurrences before the error occurred (e.g. someone tripped the power switch, a disk in a RAID5 array died)
If relevant, the output from ‘DBCC CHECKDB (yourdbname) WITH ALL_ERRORMSGS, NO_INFOMSGS’
The SQL Server version and service pack level
For the “What’s the best technology for me to use?” scenario:
What exactly are you trying to do? Enable local hardware redundancy? Geo-clustering? Instance-level failover? Minimize downtime during recovery from IO errors with a single-system?
What are the SLAs (Service Level Agreements) you must meet? (e.g. an uptime percentage requirement, a minimum data-loss in the event of a disaster requirement, a maximum downtime in the event of a disaster requirement)
What hardware restrictions do you have? (e.g. “I’m limited to a single system” or “I have several worldwide mirror sites but the size of the pipe between them is limited to X Mbps”)
What kind of workload does you application have? (or is it a mixture of applications consolidated on a single server, each with different SLAs) How much transaction log volume is generated?
What kind of regular maintenance does your workload demand that you perform (e.g. “the update pattern of my main table is such that fragmentation increases in the clustered index, slowing down the most common queries so there’s a need to perform some fragmentation removal regularly”)
Finding the Logs
You will often find more information about an error by looking in the Error and Event logs. There are two sets of logs that are interesting:
SQL Error Log: default location: C:\Program Files\Microsoft SQL Server\MSSQL.#\MSSQL\LOG (Note: The # changes depending on the ID number for the installed Instance. This is 1 for the first installation of SQL Server, but if you have mulitple instances, you will need to determine the ID number you’re working with. See the BOL for more information about Instance ID numbers.)
Windows Event Log: Go to the Event Viewer in the Administrative Tools section of the Start Menu. The System event log will show details of IO subsystem problems. The Application event log will show details of SQL Server problems.

hi,I have a question on sql database high availability. I have tried using database mirroring, where I am using sql standard edition, in this database mirroring of synchronous mode is the only option available, and it is giving problem, like sql time out errors on my applicatons since i had put in the database mirroring, as asynchronous is only available on enterprise version, is there any suggestions on this. thanks ---vijay

Wait on the Database Engine recovery handle failed. Check the SQL server error log for potential causes in SQL Server 2012 Developer Edition

I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htm

Hi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Can I define a SQL Server View to Oracle data?

So I have a subset of data whose source of truth resides in an Oracle Database. Can I define a SQL Server View to retrieve this subset of data and make it available on the SQL Server side for say Reporting and SSRS? I think I also saw where they tend to
prefer User-Defined functions as opposed to a view. If I define the view using an OPENQUERY, I have noticed that it seems to run FOREVER on the SQL Server side and returns pretty timely if I run in Oracle SQL Developer. Is there anything I can tweak to improve
this timeliness or lack there of?
And the whole reason I'd like to create a view of this Oracle data is so that I can take advantage of all the views and functions that we have created on the SQL Server side.
Has anyone gone down this path and can offer some advice and web sites or YouTubes as to the best way to approach this?
Thanks for your review and am hopeful for a reply while I keep Googling this.

There are couple of ways by which you can connect and fetch the data
OPENQUERY - which you are already using [uses linked server] -
runs on remote server
OPENROWSET - I would like to avoid this because it requires crenditials
OPENDATASET - Similar issue like OPENROWSET
Directly access linked server like LINKEDSERVER.DATABASE.SCHEMA.TABLE -
runs on your local server
Now, performance
basically, they have the same performance advantages and disadvantages when connecting to remote server. But you can enhance it by
Avoiding data conversion
Using procedure on Oracle and then call it from SQL Server (due to compiled plan your result will be faster)
Avoiding dealing with complex data types
If you are dealing with large number of records, try using Oracle connector in SSIS. I found it working much better than SQL sometimes.
Hope this will help
Glad to help! Please remember to accept the answer if you found it helpful. It will be useful for future readers having same issue.
My Profile on Microsoft ASP.NET forum

Replication Error in Goldengate SQL Server 2005 to Oracle.

Dear All
SQL Server 2005 is my source database and oracle is my destination database when i run my param file at source side following error occur.Kindly suggest the solution.
ERROR OGG-00146 VAM function VAMInitialize returned unexpected result:
error 600 - VAM Client Report <MSSqlVam: (1) At least one option of type MANAGESECONDARYTRUNCATIONPOINT
needs to be specified for TRANLOGOPTIONS (DSOPTIONS)>.

The GoldenGate forum is over here:
GoldenGate
(question is somewhat old, but unanswered)
SQL Server setup - you have to choose one of two options for the truncation point and the transaction log:
If the Extract process is running against a SQL Server 2005 source, use the TRANLOGOPTIONS
parameter to control whether Extract or SQL Server maintains the secondary truncation
point. This is a required parameter and must contain one of the following options:
SQL Server replication maintains the truncation point
Use TRANLOGOPTIONS with the NOMANAGESECONDARYTRUNCATIONPOINT option if Extract and
SQL Server 2005 replication or a third-party replication program will be running at the
same time for the same database.
Oracle GoldenGate maintains the truncation point
Use TRANLOGOPTIONS with the MANAGESECONDARYTRUNCATIONPOINT option if Extract and SQL
Server 2005 replication or a third-party replication program will not be running at the
same time for the same database.
See page 29 in the SQL Server setup and installation guide

Migrating SQL Server 2000 to Oracle 9i

Hi
I will explain system first.The current system has Delphi 5 as Front -End and SQL Server 2000 as Back -End
Now i want to make the Delphi 5 Application compatible with both SQL Server 2000 and Oracle 9i.
What all things should be taken in to consideration for this process????
Ren

Looking forward for HELP
I will explain system first.The current system has Delphi 5 as Front -End and SQL Server 2000 as Back -End
Now i want to make the Delphi 5 Application compatible with both SQL Server 2000 and Oracle 9i.
What all things should be taken in to consideration for this process????
Ren

SQL Server Procedures to Oracle Functions

Is there an option in the Migration Assistant 1.2.0 that will convert the SQL Server procedures into Oracle Functions (rather than procedures)?
By default the T/SQL procedures return a integer status code. Our middle-tier requires calls to procedures to return a status code (integer), and I'd like the migration to modify the "procedure" to a "Function returning Integer" rather than Procedure.

Thomas,
This is not an option currently. We will look into this for a future release. You could manually make the changes post conversion, prior to generation. As well as adding appropriate RETURN statements, you may want to add additional exception handling so the appropriate error is passed back.
Donal

SQL Server 200 to Oracle - problem loading objects

Here's what I've done so far:
1. Download and install SQLDeveloper (C:\Oracle\sqldeveloper 1.2.1.32.13)
2. Create omwbuser (w/ role=dba) in Oracle test database (hc02) (9.2.0.7.0).
3. From Explorer, double-click sqldeveloper.exe
4. File > New > Database connection (clicked Test button, but whatever it was that popped up, disappeared before I could read it.)
5. Assuming it worked, click Connect button. Try a better test "select name from v$database;". Works.
6. Migration > Repository Management > Create Repository ("Repository Built Successfully")
7. Migration > SQL Server Offline Capture > Create Database Capture Scripts.
Choose C:\Oracle\sqldeveloper\sqldeveloper\temp
Generate for Windows Batch File
Microsoft SQL Server (2000)
8. Email scripts to Sql Server dba to execute. Get files back.
9. Copy 16 SS2K_SYS<objectname>S.dat files to C:\Oracle\sqldeveloper\sqldeveloper\temp
10. Migration > SQL Server Offline Capture > Load Database Capture Script Output
Open C:\Oracle\sqldeveloper\sqldeveloper\temp\sqlserver2000.ocp
Window pops up labelled "Capturing Database", but I don't see any entries under "Object Type" or "No of Objects Captured".
Lower down in the pop up window it says "Capture Done".
What am I missing?

Hi,
Here is the detailed explanation.
Iam using the latest version of SQL Developer 1.5 EA2 with the thrid party JDBC driver as jtds 1.2.jar file. I have created connections of SQL Server 2000 and oracle 9i.
I have created the repository and associated it. I can able to view the structure of SQL Server Objects like tables, views, procedures etc.,
All the pre-migration check got success.
When i try to do "Quick Migrate Microsoft SQL Server", Iam getting the following exception in the trace window..
WARNING: Unknown directive: SetSkipJ2SDKCheck
DB Adapter warning: Replacing connection creator oracle.jdeveloper.db.adapter.My
SQLConnectionCreator for subtype MYSQL with oracle.dbtools.thirdparty.mysql.MySQ
LConnectionCreator
DB Adapter warning: Replacing connection creator oracle.jdeveloper.db.adapter.Or
acleConnectionCreator for subtype oraJDBC with oracle.dbtools.raptor.standalone.
connection.RaptorConnectionCreator
Exception occurred during event dispatching:
java.lang.NullPointerException
at javax.swing.plaf.basic.BasicTreeUI.paint(BasicTreeUI.java:1215)
at javax.swing.plaf.ComponentUI.update(ComponentUI.java:142)
at javax.swing.JComponent.paintComponent(JComponent.java:742)
at javax.swing.JComponent.paint(JComponent.java:1005)
at oracle.ide.controls.JTreeTable$TreeTableCellRenderer.paint(JTreeTable
.java:309)
at javax.swing.CellRendererPane.paintComponent(CellRendererPane.java:134
at javax.swing.plaf.basic.BasicTableUI.paintCell(BasicTableUI.java:2071)
at javax.swing.plaf.basic.BasicTableUI.paintCells(BasicTableUI.java:1972
at javax.swing.plaf.basic.BasicTableUI.paint(BasicTableUI.java:1895)
at javax.swing.plaf.ComponentUI.update(ComponentUI.java:142)
at javax.swing.JComponent.paintComponent(JComponent.java:742)
at javax.swing.JComponent.paint(JComponent.java:1005)
at javax.swing.JComponent.paintWithOffscreenBuffer(JComponent.java:4963)
at javax.swing.JComponent.paintDoubleBuffered(JComponent.java:4916)
at javax.swing.JComponent._paintImmediately(JComponent.java:4859)
at javax.swing.JComponent.paintImmediately(JComponent.java:4666)
at javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:451)
at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(System
EventQueueUtilities.java:114)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
read.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:163)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:153)
at java.awt.Dialog$1.run(Dialog.java:515)
at java.awt.Dialog.show(Dialog.java:536)
at java.awt.Component.show(Component.java:1300)
at java.awt.Component.setVisible(Component.java:1253)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.dbtools.migration.workbench.core.ui.MigrationProgressBar.start
(MigrationProgressBar.java:338)
at oracle.dbtools.migration.workbench.core.ui.MigrationProgressBar.start
(MigrationProgressBar.java:233)
at oracle.dbtools.migration.workbench.core.ui.AbstractMigrationProgressR
unnable.start(AbstractMigrationProgressRunnable.java:127)
at oracle.dbtools.migration.workbench.core.FullMigrateInitiator.launch(F
ullMigrateInitiator.java:74)
at oracle.dbtools.raptor.controls.sqldialog.ObjectActionController.handl
eEvent(ObjectActionController.java:140)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:513)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:84
3)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:486)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:18
49)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.jav
a:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel
.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258
at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1
000)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMen
uItemUI.java:1041)
at java.awt.Component.processMouseEvent(Component.java:5488)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5253)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3955)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
read.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
SELECT DISTINCT(REF_ID_FK), REF_TYPE FROM MD_ADDITIONAL_PROPERTIES WHERE PROP_KE
Y IN (?) AND CONNECTION_ID_FK = ?
The Migration log message says like this :
a USE database statement is not allowed in a procedure or trigger.
Also, Iam not even able to migrate single table.
The Migration log gives the same message as:
a USE database statement is not allowed in a procedure or trigger.
Kindly let me know if am not clear in my explanation.
Kindly help me to proceed as soon as possible.
Thanks & Regards,
Inigo Skylab
Message was edited by:
Inigo Skylab

Oracle equivalent for MS Sql Server WITH(NOLOCK)

Hi all :-)
What is the equivalent of MS Sql Server WITH(NOLOCK)
hint in Oracle ... or ... how can I achieve the same
effect in Oracle SELECT queries ?

= dirty read .
to the op : read the concepts guide before going further; Oracle implements a different concurrency model than SQL Server

JavaDB / Apache Derby equivalent to the SQL Server IsNull and Oracle nvl

Similar Messages

Maybe you are looking for