Getting files from a PC via a wireless router?

I am trying to get files from my room mate's laptop by going to Finder and then Network. I see the computer's name (Toshiba-User) with a light gray network icon and when I double click to connect, it shows me the little white bar with the blue lines through it then it says:
"SMB/CIFS File System Authentication
Enter the workgroup or domain and your user name and password to access the server "TOSHIBA-USER."
Workgroup or Domain:
WORKGROUP (<-----that's a text box, I can type whatever I want in it but it's filled out like that automatically.)
Name:
LUIS (<------------That's another blank text box but it's automatically filled out like so)
Password:
(blank text space)
(box) remember this password in my keychain
Cancel OK
My room mate claims to never have set up any kind of "WORKGROUP" and doesn't even know what the password is. I need the assistance of the more mac-experienced!

Actually, you need someone more PC-experienced.
The fact is, if the PC user never defined a workgroup, then 'WORKGROUP' is the default, so that's what his machine is.
Despite how it may look, the Mac doesn't know that, it's just an assumption since it's the default on your Mac, too, unless you've changed it in Directory Access.
As for the Username, it's defaulting to 'Luis' since that's your username on your machine. The Mac OS assumes that your username is the same on the other machine, but if it isn't you're welcome to change it here.
As for the password, the account should have a password set on it - note that this is the password for the account on the remote PC and is in no way related to any password set on your machine.
You'd need to talk to your roommate to find out what username and password you should use to log onto his machine.
If he's truly never set a password on his machine, then the machine should be blank, but that's a horribly scary situation to be in - a Windows system with no password set? :: shudder :: I'm surprised it's not crawling across the desk with all the bugs, spyware and viruses it must be infected with.

Similar Messages

  • [Solved] Delete files from usb drive connected to wireless router

    Hello,
    I have a home network with Samba for file sharing.
    I have a Netgear router with a Western Digital 2TB external drive attached to the router.
    I installed Samba according to the arch wiki and everything works fine but I cannot delete or access some files from the shared USB drive.
    I access the file as follows:
    $ cd /mnt/smbnet/WORKGROUP/READYSHARE/USB_Storage/
    Here are the permissions:
    $ ls -l /mnt/smbnet
    total 0
    drwxrwxrwx 2 root root 0 Dec 31 1969 DEANSNETWORK
    drwxrwxrwx 2 root root 0 Dec 31 1969 MYGROUP
    drwxrwxrwx 2 root root 0 Dec 31 1969 WORKGROUP
    $ ls -l /mnt/smbnet/WORKGROUP/
    total 0
    lrwxrwxrwx 1 root root 13 Dec 31 1969 READYSHARE -> ../READYSHARE
    $ ls -l /mnt/smbnet/WORKGROUP/READYSHARE/
    total 0
    drwxrwxrwx 2 root root 0 Dec 31 1969 USB_Storage
    $ ls -l /mnt/smbnet/WORKGROUP/READYSHARE/USB_Storage/
    total 0
    drwxr-xr-x 2 edgar users 0 Jul 22 21:04 BACKUPS
    drwxr-xr-x 2 edgar users 0 Jul 15 10:43 WD
    $ ls -l /mnt/smbnet/WORKGROUP/READYSHARE/USB_Storage/BACKUPS/
    total 0
    drwxr-xr-x 2 edgar users 0 Jul 11 22:36 Laurie_Laptop
    drwxr-xr-x 2 edgar users 0 Jul 22 21:04 TRASH
    drwxr-xr-x 2 edgar users 0 Jul 12 09:50 Work_Laptop
    If I try to delete the BACKUPS directory, I get errors:
    $ rm -r BACKUPS/
    rm: cannot remove ‘BACKUPS/Laurie_Laptop’: Permission denied
    rm: cannot remove ‘BACKUPS/TRASH/Documents/C++Prog/2541/BibleTriviaTest’: Permission denied
    rm: cannot remove ‘BACKUPS/TRASH/Documents/C++Prog/2541/HouseTest’: Permission denied
    rm: cannot remove ‘BACKUPS/TRASH/Documents/C++Prog/Bitmanip’: Directory not empty
    rm: cannot remove ‘BACKUPS/TRASH/Documents/C++Prog/CurrentMusicPrograms/Musc110’: Directory not empty
    etc...
    Attempting to change the mode doesn't work:
    $ chmod 777 BACKUPS/
    [edgar@arch USB_Storage]$ ls -l
    total 0
    drwxr-xr-x 2 edgar users 0 Jul 22 21:04 BACKUPS
    drwxr-xr-x 2 edgar users 0 Jul 15 10:43 WD
    Thanks for any help you can provide.
    Last edited by mrgar (2014-07-24 02:11:56)

    Here is the output:
    $ mount | grep /mnt
    smbnetfs on /mnt/smbnet type fuse.smbnetfs (rw,nosuid,nodev,relatime,user_id=1000,group_id=100)
    The USB drive is Western Digital My Book 2 TB drive attached as a NAS to the router that shares it.  I installed Samba on the arch machine so I can access and backup various home computers onto the NAS.
    Here is some info I just found on the Western Digital Support site:
    The Western Digital units mentioned above use a proprietary file system and cannot be reformatted as FAT32, NTFS, or a Mac File System.
    The file system on the WD My Cloud EX2, WD My Cloud EX4, WD My Cloud, WD My Book Live, WD My Book Live Duo, WD ShareSpace, WD ShareSpace, WD TV Live Hub, My Net N900 Central, WD My Book World Edition, WD NetCenter hard drives support access from Windows, Mac and most Linux based computer systems through a SAMBA network sharing connection.
    I thought I would mention that I can access the NAS and write, read and execute from the drive.
    $ cd /mnt/smbnet/WORKGROUP/READYSHARE/USB_Storage/
    [edgar@arch USB_Storage]$ mkdir Test
    [edgar@arch USB_Storage]$ ls
    BACKUPS Test WD
    [edgar@arch USB_Storage]$ cd Test
    [edgar@arch Test]$ vim testfile.txt
    [edgar@arch Test]$ ls -l
    total 1
    -rwxr--r-- 1 edgar users 16 Jul 23 07:47 testfile.txt
    [edgar@arch Test]$ cat testfile.txt
    This is a test.
    [edgar@arch Test]$ rm testfile.txt
    [edgar@arch Test]$ cd ..
    [edgar@arch USB_Storage]$ rm -r Test/
    [edgar@arch USB_Storage]$ ls
    BACKUPS WD
    However I want to copy large files with cp -ruv from my arch machine to the NAS.
    This is where the trouble lies.  Thanks for your help.

  • Can I print from my iPad 2 via a wireless router to a kodak printer

    Is it possible to send a document from my iPad via my wireless router to a kodak printer.

    It's possible with AirPrint. See:
    AirPrint Information and FAQ: Apple Support Communities
    iOS: AirPrint 101
    If the printer does not support AirPrint then you may be able to activate it with AirPrint Activator 2.1b2 or Printopia 2.1.4.

  • How to upload words, exel, PDF file from the pc via itune to the iPad, and where will the uploaded file be saved? In the apps?

    How to upload words, exel, PDF file from the pc via itune to the iPad, and where will the uploaded file be saved? In the apps?

    You will need an app (or apps) on your iPad that is capable of reading the documents, as they will be saved with the app - if you don't have such an app then there is nothing to transfer them to or to read/access them.
    One method of transferring them is toconnect your iPad to your computer's iTunes, select it's app tab, and then scroll to the bottom of it - you should the apps That you've got that are capable of file-sharing (if you've got any).  Selecting/high-lighting one of them should then allow you to add files to it via the box to the right of it.
    An alternative way to get the documents onto your iPad is if the app that you want to transfer them to has a wifi setting, which will then allow you to transfer the documents wirelessly. You can also send the documents to yourself as attachments and then use Mail's 'open in' facility to copy them into your chosen app.
    Edit : more info on file sharing from the manual :
    File Sharing lets you transfer files between iPad and your computer. You can share files created with a compatible app and saved in a supported format.
    Apps that support file sharing appear in the File Sharing Apps list in iTunes. For each app, the Files list shows the documents that are on iPad. See the app’s documentation for how it shares files; not all apps support this feature.
    Connect iPad to your computer.
    In iTunes, select iPad in the Devices list, then click Apps at the top of the screen.
    In the File Sharing section, select an app from the list on the left.
    On the right, select the file you want to transfer, then click “Save to” and choose a destination on your computer.
    Transfer a file from your computer to iPad:
    Connect iPad to your computer.
    In iTunes, select iPad in the Devices list, then click Apps at the top of the screen.
    In the File Sharing section, click Add.
    Select a file, then click Choose (Mac) or OK (PC).
    The file is transferred to your device and can be opened using an app that supports that file type. To transfer more than one file, select each additional file.
    Delete a file from iPad: Select the file in the Files list, then tap Delete.
    Message was edited by: King_Penguin

  • How to get file from FTP Server using File Control

    Hi,
    Any one did getting file from FTP Server?
    Please let me know any one help me.
    I would need to get file from FTP Server.
    Thanks,
    Madhu

    Yes I have done that. But In FTP Server I cannt read file, because no previliges. Only I need to copy file from FTP Server to local server then only I can read that file.
    I tried all options using FileConrol(getFiles(),read()).
    getFiles() - It wont copy the file, it give information about file.
    read() - I dont have previliges to read the file.
    Please tell me any other procedure would be there for getting file from FTPServer.
    Thanks,
    Madhu

  • How can I safely and securely get files from my mac.

    I want something like LogMeIn Pro but for free. ther is a free version it DOES support mac BUT not gettong files. I want to be able to securely get files from my mac from school or anywhere whitout paying!!
    I HAVE had a look on google, no help.

    Try versiontracker.com

  • How to get file from server while click on link

    Hi,
    i created on link and i gave one server path to select file from server but while clickinng on link it no displaying any thing.
    following is the Destination url that i gave for the item.
    /u08/app/appvis/xxex/inst/xxex_apps/xxrbe/logs/appl/conc/log/
    please tell me how to get file from server while click on link.

    Ok I got your requirement now.
    If you are getting file names from view attribute then you should not be adding destination URI property for the link.
    Instead you can use OADataBoundValueViewObject API.
    Try below code in your controller processRequest method:
    I am assuming that you are using classic table.
    Also in below example it considers OAMessageStyleText and you can replace it with link item if you want.
    OATableBean tableBean =
    (OATableBean)webBean.findChildRecursive("<table item id>");
    OAMessageStyledTextBean m= (OAMessageStyledTextBean)tableBean.findChildRecursive("<message styled text in table item id>");
    OADataBoundValueViewObject tip1 = new OADataBoundValueViewObject(m, "/u08/app/appvis/xxex/inst/xxex_apps/xxrbe/logs/appl/conc/log/"+"<vo attr name which stores file name for each row>");
    m.setAttributeValue(oracle.cabo.ui.UIConstants.DESTINATION_ATTR, tip1);
    Regards,
    Sandeep M.

  • I have 3 computers. i want to get files from one to another. it doesn't work, i think it is a problem with the apple id?

    i have 3 computers. i want to get files from one to another. it doesn't work, i think it is a problem with the apple id?

    Roger:
    Zugriffsrecht means Access Right according to the translators.
    martinamm:
    You can't do what you want with iCloud.  You will need to setup remote access to your main computer with VPS or some similar remote access application.   With VPS you have an application running on your main computer turning it into a server and an client app on your laptop so you can access it remotely.  There are many such apps out there, some probably more feature filled than VPS.  You might post in the system forum that you're running and ask there.
    OT

  • How do I get files from multiple DVDs that are using thesame file names?

    How do I get files from multiple DVDs that are using thesame file names? Message says "file already exists in catalog"
    Message was edited by: marcr56

    marcr56
    I am viewing your question from different perspective, that is, the issue that you face when you are ripping VOBs from a second DVD-VIDEO on DVD disc using Premiere Elements,
    It is best to give the Premiere Elements version and computer operating system that it is running on. In the absence of that, I will generalize.
    Assuming that you are using
    Premiere Elements 12
    Add Media
    "DVD Camera or Computer Drive"
    Video Importer
    Typically the Video Importer Save In: is C:\Users\Owner\Videos
    Each of your DVD discs is going to have the same names for the ripped VOBs (VTS_01_1.VOB and so on depending on the duration of the movie). Consequently, after the ripping of the first DVD's VOBs and their save to Videos, you will end up with that "files already existing..." block for the ripping of the VOBs from the second DVD.
    The answer is, for each DVD disc VOB ripping, to plan ahead and create and set for different folders in Videos in the Save In field of the Video Importer.
    Please review and then let us know if that works for you. Please do not hesitate to ask if you need clarification on anything that I have written.
    Thank you.
    ATR.

  • Getting files from a business that uses Photoshop CS6. I use CS3 and have text problems

    Hi, I'm getting files from a business that uses Photoshop CS6. I use CS3 and when I edit the text, the text moves to a different location even off screen.
    Anyone know how to fix this?
    It makes it hard to copy the text and imposible to change the color or make corrections.
    This just started when they went to Photoshop CS6.
    Thanks,
    Jeffery

    Ask the folks supplying you with files whether they've updated to the latest version...  There were problems with Photoshop CS6 13.0.0. saving text layers in jumbled-up fashion.
    -Noel

  • Dispatcher yellow,J2EE status info unavailable,Could not get file from DB

    Hello Experts,
    I have successfully installed a ECC 6.0 server-ABAP +JAVA  system (DB2 v9.5 FP4 windows server 2008-x64 bit).
    Kernel: 700 , Patch: 185 ; SP level : rel 700 , level 17
    I upgraded JSPM sucessfully from 14 to 17.Then i was trying to apply JAVA sp's one by one using single sp option JSPM tool.
    I DEPLOYED the first sp component sucesfully but after that the next component gave warning in JSPM check that SDM is not started.
    I checked MMC.Dispatcher was YELLOW and J2EE status info unavailable. Cannot use JCMON to start SDM..option 20 gives error--cannot access shared memory
    I already tried Notes   784568 and 997510
    Relevant logs:-
    jvm_bootstrap.out
    =================================================================================================
    Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
    com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
    Attempt to fully materialize lob data that is too large for the JVM.
    Disable data source property "fullyMaterializeLobData" for locator-based lob implementation. ERRORCODE=-4499, SQLSTATE=null ERRORCODE=-4499, SQLSTATE=null
    Exception occurred:
    com.sap.engine.bootstrap.SynchronizationException: Unable to synchronize native files for instance [ID140026]!
    ==============================================================================================
    dev_jcontrol
    =============================================================================================
    Thr 4360] *** ERROR => JsfOpenShm: FtInit(SESSION, 2, 176) failed (got (rc = 0 operation successful), expected (rc = 8 already initialized)) [jsfxxshm.c   913]
    [Thr 4360] *** ERROR => Can't create shared memory segment 69 (rc = 1) [jcntrxx.c    1749]
    [Thr 4360] *** ERROR => Can't initialize JControl Administration [jcntrxx.c    273]
    [Thr 4360] JControlCloseProgram: started (exitcode = -1)
    [Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c   1243]
    [Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c   1250]
    [Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c   1257]
    =================================================================================================
    log_bootstrap_ID0140026.0
    ==========================================================================================
    Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
    com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
    ============================================================================================
    Eagerly looking forward to a solution from you experts..
    Thanks,
    Rakesh

    Hi,
    I am facing the same related problem with ECC 6.0.
    My dispatcher started it is showing yellow-  dialog queue standstill, J2EE status info unavailable
    after some time dispatcher has stopped.
    Please check my below trace file for dispatcher:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      03
    sid        DEV
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    114
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        13108
    Fri Nov 27 02:31:55 2009
    kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (03 13108) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 114 successfully loaded
         shared lib "dw_xtc.dll" version 114 successfully loaded
         shared lib "dw_stl.dll" version 114 successfully loaded
         shared lib "dw_gui.dll" version 114 successfully loaded
         shared lib "dw_mdm.dll" version 114 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3903
    Fri Nov 27 02:31:59 2009
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5361]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >sapdev_DEV_03                           <
    DpShMCreate: sizeof(wp_adm)          15800     (1436)
    DpShMCreate: sizeof(tm_adm)          4232256     (21056)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    DpShMCreate: sizeof(comm_adm)          528064     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1536)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 08290040, size: 4889440)
    DpShMCreate: allocated sys_adm at 08290040
    DpShMCreate: allocated wp_adm at 08292090
    DpShMCreate: allocated tm_adm_list at 08295E48
    DpShMCreate: allocated tm_adm at 08295E78
    DpShMCreate: allocated wp_ca_adm at 0869F2B8
    DpShMCreate: allocated appc_ca_adm at 086A5078
    DpShMCreate: allocated comm_adm at 086A6FB8
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 08727E78
    DpShMCreate: allocated gw_adm at 08727EB8
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 08727EE8
    DpShMCreate: allocated wall_adm at 08727EF0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    Fri Nov 27 02:32:00 2009
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 1023 blocks reserved for free list.
    ES initialized.
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 13356
      argv[0] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
      argv[1] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
      argv[2] = pf=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=2919
      argv[5] = -DSAPSYSTEM=03
      argv[6] = -DSAPSYSTEMNAME=DEV
      argv[7] = -DSAPMYNAME=sapdev_DEV_03
      argv[8] = -DSAPPROFILE=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
    ***LOG Q0K=> DpMsAttach, mscon ( sapdev.visu.com) [dpxxdisp.c   11753]
    DpStartStopMsg: send start message (myname is >sapdev_DEV_03                           <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Fri Nov 27 02:32:01 2009
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpJ2eeLogin: j2ee state = CONNECTED
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 114
    Release check o.K.
    Fri Nov 27 02:32:05 2009
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1468
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2927) [nixxi.cpp    4248]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=13356)
    ERROR => DpProcKill: kill failed [dpntdisp.c   371]
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Fri Nov 27 02:32:40 2009
    ERROR => W0 (pid 13364) died [dpxxdisp.c   14441]
    ERROR => W1 (pid 13372) died [dpxxdisp.c   14441]
    ERROR => W2 (pid 13380) died [dpxxdisp.c   14441]
    ERROR => W3 (pid 13388) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W4 (pid 13396) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W5 (pid 13404) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W6 (pid 13412) died [dpxxdisp.c   14441]
    ERROR => W7 (pid 13420) died [dpxxdisp.c   14441]
    ERROR => W8 (pid 13428) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W9 (pid 13436) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W10 (pid 13444) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:50 2009
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Thu Nov 26 21:02:50 2009
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA    13364 Ended         no      1   0        0                                                                         
    1 DIA    13372 Ended         no      1   0        0                                                                         
    2 DIA    13380 Ended         no      1   0        0                                                                         
    3 DIA    13388 Ended         no      1   0        0                                                                         
    4 UPD    13396 Ended         no      1   0        0                                                                         
    5 ENQ    13404 Ended         no      1   0        0                                                                         
    6 BTC    13412 Ended         no      1   0        0                                                                         
    7 BTC    13420 Ended         no      1   0        0                                                                         
    8 BTC    13428 Ended         no      1   0        0                                                                         
    9 SPO    13436 Ended         no      1   0        0                                                                         
    10 UP2    13444 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Thu Nov 26 21:02:50 2009
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    6
    6
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    since last update     total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    Dump of tm_adm structure:               Thu Nov 26 21:02:50 2009
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Thu Nov 26 21:02:50 2009
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:55 2009
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >sapdev_DEV_03                           < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (13340) (SOFT_KILL)
    Stop icman
    killing process (13348) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:13340  HANDLE:1564)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:56 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:13340  HANDLE:1564)
    wait for end of icman
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:57 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:58 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:59 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Please help me to start my SAP MMC.
    Thanks

  • Premier elements 10. Quits when opening "get files from..."

    How do I fix this issue: APE10 open, sets up a new project, but when I try to "get files" from "files an folders" it quits.
    Thanks

    luiscue
    There is a serious known issue with Premiere Elements 10 on a computer that uses a NVIDIA GeForce video card/graphics card. The answer to date has been to roll back
    the driver version to about May 2013. There is an Announcement at the top of this forum about all this, and much more information to be found elsewhere
    ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
    I am not sure if an automatic update of the driver version may have taken the driver version from the much older date to current version which is triggering your present situation.
    I am strictly an Elements Windows user so I am not sure if the following NVIDIA GeForce 9400 M driver version would work in your Mac computer environment.
    GeForce 320.49 May 23, 2013. The following is the NVIDIA GeForce 9400 M but listed on Windows
    NVIDIA Driver Downloads - Advanced Search
    The other consideration is the use of Premiere Elements 10 OS10.10.2. I have not seen any reports confirming that Premiere Elements 10 is compatible with OS 10.10.2.
    But then again, you report "It worked well 3 months ago. First time it has done it." Where you using the same operating system then as now?
    You can also factor into all this the usual drill considerations...
    a. Are you working with a pen and tablet device instead of mouse?
    b. Does the problem exist with antivirus and firewall(s) disabled?
    c. Have you deleted the Adobe Premiere Elements Prefs file
    Users/Owner/Libraries/Application Support/Adobe/Premiere Elements/10.0
    d. Is the latest version of QuickTime installed on your computer?
    Please review and consider and then we can discuss this further.
    Thank you for the follow up.
    ATR
    Add On..Since I am strictly an Elements Windows user, please indicate anywhere in the above where the question would not be applicable to Mac.

  • I can't open adobe ideas files from ps touch via the cloud. How do I do this?

    I can't open adobe ideas files from ps touch via the cloud. How do I do this?

    Oh good lord.  I can't believe I spent so much time on this and it's right there under Google.  Thank you so much!  Happy Thanksgiving!
    Laura
    Check me out @ http://www.lauramacky.com/

  • How do I send files from my IMAC via bluetooth to my ne Ipad.  They will not "pair" but they are connected and discoverable.  I send a file from Imac snow leopard OS X 10.6 to the ipad but the failure message says the ipad does not have the ncessary servr

    How do I send files from my IMAC via bluetooth to my new Ipad?  They will not "pair" but they are connected and discoverable.  I send a file from Imac snow leopard OS X 10.6 to the ipadusing bluetooth,  but the failure message says the ipad does not have the necessary services.  What are these?  Do I neeed to have iphoto and ms word to send pix and .doc files?

    File Sharing over Bluetooth is not a feature of iOS devices. iOS does not include the required Bluetooth profiles to allow this. You cannot add this feature, so you may as well stop trying.

  • WPF - Get files from directory with a shorter path

    Hello,
    I want to list the files in a combobox. My main question is how to get those files? I saw Directory.GetFiles(path), but I have to write the whole path (C:\Folder1\Folder2\Folder3\Folder4). How will this work on an other PC? Is somehow possible to write
    the path beginning just form the app's folder? For example: the .exe is in "C:\Folder1\Folder2", and now the path what I have to write is just ":\Folder3\Folder4".
    Thanks!

    I may be misunderstanding; please correct me if I am.  It sounds like you want to get a list of the files in the same directory as the program that's executing.  
    //A few ways to get files from the same location as the code that is executing:
    //Enumerate through each file
    foreach(var fileInfo in new System.IO.FileInfo(System.Reflection.Assembly.GetExecutingAssembly().Location).Directory.EnumerateFiles())
    //Get a collection of file information objects
    System.IO.FileInfo[] fileInfos = new System.IO.FileInfo(System.Reflection.Assembly.GetExecutingAssembly().Location).Directory.GetFiles();
    //Get the name of the directory
    string directoryName = new System.IO.FileInfo(System.Reflection.Assembly.GetExecutingAssembly().Location).DirectoryName;
    WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

Maybe you are looking for

  • SCCM App-V 5 packages to terminal server/Windows 7/Windows 10 design

     Hi, I would appreciate your input on a design question on App-V 5 on SCCM 2012 R2. Where we are: We have Terminal Servers running with App-V 4.6 Clients for some years. The users on these Terminal Servers could only receive the App-v 4.6 packages (s

  • Custom colors and fonts in in-context editor?

    I have added some custom colors and font families in our partner portal > online editor settings for a client site. When editing a page or web app item in the Manage tab of the admin console, I can see these colors and fonts in the editor. However, w

  • JAVA Performance data in EWA is missing.

    Hi SAP-experts, our EWA is missing the JAVA performance data.  In transaction  u201CSOLMAN_WORKCENTER->Root Cause Analysis->End-to-End-Analysis->JAVA-System-><One of our java-system>->Workload Analysis-><SID> - Applicaton Server Javau201D no data for

  • Detecting Non Ascii Characters

    I Have to implement a program that does a sort of form validation at server side it should be able to detect whether the user has entered any characters beside ASCII What is the simplest way of doing it Does Java String provide it Please Help

  • Aperture 3.5.1. crashes every time on startup.

    I'm having big troubles with Aperture 3.5.1, i downloaded the latest update but the program crashes on startup everytime. I really hope somebody could help me out on this... This is the logfile: Process:         Aperture [974] Path:            /Appli