Getting inputs on Digi 002 to be seen by Mac OSX Core Audio

My question revolves around getting step-by-step intructions for getting inputs to be recognized by Digi Core Audio. Microphone is not recognized when plugged into Digi 002. Working with a Digi 002, MidiMan 4x4, and Mac OSX Lion and using Logic Pro9. Can someone please tell me why computer is seeing the Digi 002 but is not seeing the microphone (inputs)? Do I need to set something up differently in the Mac Core Audio? Or did the PACE extensions I downloaded for userlok, or whatever that's called, mess up
the audio/MIDI configs?
[email protected]

hey thomas.. im using a Mac pro as well.. i had the same problem .. you need to purchase pro tools version 1.1 .it has whats called a Universal Binary Update.. it was made for intel macs... . it costs around $75 .. install it.. then goto the digidesign website and install the 1.1CS1 (customer service 1 update) you will need an authorization number.. which will come with Pro tools 1.1 you purchase.. i know it ***** to have buy pro tools software again... but its the only way... good luck!

Similar Messages

How can I get a version of Pages that is compatible with Mac OSX 10.6.8?

How can I get a version of Pages that is compatible with Mac OSX 10.6.8?

Buy an iWork retail package from a source such as Amazon or eBay.
(88544)

Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

Hello! Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

Hi
Given that your answer to 1. is 'pre-installed' and 3. is 'No', I think the only thing to do is to take it to an Apple store (ideally the one you bought it from) and have them reinstall it for you.
The intended solution in cases like yours is that you should be able to reboot and install even a wiped disk by using Apple's servers over the internet (you do this by restarting with 'command-r' and choosing 'reinstall Lion'). However if this isn't working for you then you need to get the store to do it. Don't let them fob you off with 'go home and try again'. Have them do it in the shop (you're still covered by Applecare warranty so it should cost you nothing save the inconvenience of the trip and possibly leaving the machine there while they fix it).
A reinstall should leave all your own personal data and programs in place.
Note for future: when you get it fixed, first thing to do is buy a cheap external drive and start keeping a backup (either Time Machine or clone with Carbon Copy Cloner).
Message was edited by: softwater

HT4587 I downloaded Airport Express Utility 5.6 to get my Airport Express to work with the latest Mac OSX 10.7.4, but when I install and run it, it still says my Airport Express is out-of-date and needs the 5.6 utility.

I downloaded and installed Airport Express Utility 5.6 to get my old Airport Express to work with the latest Mac OSX 10.7.4, but when I install and run it, it still says my Airport Express is out-of-date and needs the 5.6 utility. What's up?

It is likely that you downloaded AirPort Utility 5.6.1. If you checked the requirements, this only runs on Leopard or Snow Leopard Macs.
You have Lion, so you need AirPort Utility 5.6 for Mac OS X Lion

Can't get any audio ("no input or output devices") on MacBook Air, running MAC OSX 10.8.5

This happened today completely out of the blue.
I have tried some of the other suggestions posted here and other forums. I did a Disk Utility check and nothing seems wrong with the hard disk,
Rebooted 3 times.
Re-set the PRAM
Tried headphones (still no response from either audio volume key, as both show a circle with line through it,
and tried System Preferences on Sound, but I get the same message (no devices).
Tried to locate the preferences file called BezelServices that others have talked about, but can't find it...
Ted

This link may help: http://community.m-audio.com/m-audio/topics/m_audio_project_mix_i_o_driver_for_m ountain_lion
I haven't tried it myself, but I do plan to in the near future, as I dont want to shell out major bucks for a new control surface/interface.

I get a memory stacking kernel panic when I startup Mac osx

Can only boot into safe mode... When booted normally a black and white screen comes up with the aPple logo and a bunch of kernel code errors. I saw a pic online of someone else getting the same error message and the problem was referred to as a memory stacking issue where the ram may be bad in the iMac... Does anyone know how to fix this error so I can do a normal restart and not have to boot into safe mode? I have tried to run the apple hardware test, but I no longer have the system CDs...

See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

After downloading Firefox 4.0, I can't get it to run on my system, which is Mac OSX 10.4.11. What can I do?

I've downloaded Firefox 4.0 three times, but whenever I try to run it, I get a message to the effect that it cannot run on my system. I've read that it doesn't work on OSX 10.3, but my system is a later version. What's up?

http://www.mozilla.com/en-US/firefox/4.0/system-requirements/
Mac
Operating Systems
* Mac OS X 10.5
* Mac OS X 10.6
Recommended Hardware
* Macintosh computer with an Intel x86 processor
* 512 MB of RAM
* 200 MB hard drive space
For older Macs that aren't supported in Firefox 4.0, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/

Every time i try to download something, i get redirected to the home page and nothing happens (mac osx mavericks, 10.9.4) DETALS INSIDE!

so basically I'm on a Macbook Pro and i have osx mavericks 10.9.4
i tried to download HotSpot Shield. i go to their home page and click download and i get redirected to the home page and there is no download, NOTHING HAPPENS.
same thing with trying to download magnet links and .torrent files on Piratebay.se. i click "Get this Torrent" and i get REDIRECTED TO THE HOME PAGE. the .torrent file doesn't appear in Downloads. NOTHING HAPPENS!!
please help me. PLEASE!!

Other browsers that you can look at:
* http://caminobrowser.org/download/releases/
* [http://en.wikipedia.org/wiki/ICab iCab]: http://www.icab.de/
* http://www.seamonkey-project.org/releases/seamonkey1.1.19

Firefox 4.0 will not download at all, I get the circle with a slash. I have mac osx.

I had firefox 3.6, downloaded free upgrade, which totally replaced the old one, it's gone.
But the new icon has a circle and slash on it and is not viable. Doesn't work, doesn't open, messages says: You cannot open the application Firefox.app because it is not supported on this system.
I have Mac OSX 10.4.11.

Same problem, but I'm on OSX 10.5.8 - non Intel mac.
Wording is actually "... because it is not supported on this architecture."
Ironic that I have to use Safari to post this. :)

Why is logic pro only showing 8 inputs with core audio?

I use Logic Pro and Pro Tools HD TDM and I have 2 audio interfaces with a total of 20 analog inputs. It seems that in Logic, I can only access 8 inputs. I suspect this has something to do with core audio and logic but there has to be a way around this that allows me to use all 20 inputs right? Any help would be greatly appreciated.

Too bad you're not running an earlier version of Pro Tools, prior to 8.03 or you could use your system under DAE and have access to the HD system in Logic, or at least in some versions of Logic 9.
http://avid.force.com/pkb/articles/en_US/Compatibility/en363063
You will be limited to 8 ins under core audio as I recall... this is due to Avid's core audio driver.
Here's more about HD support.
http://documentation.apple.com/en/logicpro/tdmguide/index.html#chapter=preface%2 6section=1%26tasks=true

Logic 7.1 MIDI problem (Digi 002)

A year ago, I bought a dual G4, a Digi 002, and started recording. After realizing I was using GarageBand more than ProTools, I bought Logic Pro. Of course, the 002 isn't a supported interface, but I could still use it as an input device - I could have my microphones, guitars, etc. pugged into it. I was also able to have my keyboard plugged into the MIDI IN on my 002, and I could use it in Logic. My only use for it is to use the audio instruments, to create strings, etc.
Somewhere in an update, things changed. Now, Logic doesn't seem to recognize any MIDI coming from the 002. I have trashed prefs, messed around with the AudioMidi setup... in the AMSetup, I can see my 002, and I can add in my keyboard, and cable it to the MIDI port of the 002. I get nothing in Logic.
Another change (in case these are related): At the same time, whenever I open a new Logic project, the "output" track (says "output 1-2) has a red X through it. I can manually change that, but it is weird.
What I want to be able to do is play my keyboard and have it make sounds through the audio instrument tracks.
In my transport window, it used to show the note I was playing when I hit my keyboard. Now it says No In, No Out.
Details:
OS 10.4.2, CoreAudio 6.9.2, LogicPro 7.1
I lost MIDI BEFORE I went to 10.4 and after I went to CA 6.9 (tried reverting that but it still didn't help), and after I went to QT 7 (reverted but that didn't help either).
Anyone know what's going on?
I am a real noob when it comes to the environment. I have several logic books, but I still can't grasp it. I have the feeling I could solve this in the environment, but I'm not sure how.

Dirk, recently a whole load of musos like yourself started having problems with their misi setup following a security update from apple. The culprit seems to be update 2005-007. Anyway I spent hours trying to get my Logic Pro 7 to work properly again and after re-installing everything from Logic to the midi and audio drivers for my outboard midi and sound card to running first aid and doing permission repairs etc, I eventualfly went for the drastic step of doing an archive and re-install of my OS X.
How to do it properly is listed here:
http://docs.info.apple.com/article.html?artnum=107120
Follow the instructions and reboot.
You will then need to run the software updates up to but excluding security 2005-007
You may fing some of your other 3rd party software may need to be re-insatlled after this and possibly some of your drivers for midi. But take it step by step. After the archive and install, run your software update from the apple menu then try to run Logic as normal. If any errors come up concerning midi timing etc, quit and re-intall your midi drivers from the latest update at the manufacturers site. Then try Logic again after rebooting.
Hope this helps.
By the way, it took me 2!/2 hours to do all theat, so patience is needed!
best regards
martin
When Apple finally get round to sorting out what is causing this they may do a patch update. In the meantime this was how I got back up and running.

Digi 002

Dear Guys, can someone run me through setting up a Digi 002 to use as an interface with Logic Studio?

Bigseal wrote:
Hi Guys,
Me again. I have imported audio tracks from another studio and am mixing well but I want to add some more guitar. I made a new audio track, pressed record and all I get is a very loud hiss. I have Input 1 and Output 1 & 2 selected on the strip. How can I have sound coming through my Digi 002 from my guitar to the recorder on Logic? I can hear my other tracks through the Digi 002. Can someone tell me what I am doing wrong and what I should do?
This is a known issue with a version of core audio driver from Digidesign.
This was happening about a YEAR ago.
What version of digidesign software are you running? Are you on the latest possible version for you?
Cheers

Can't sync Digi 002 as an interface for Logic Pro 7

I discovered Logic about a year after I had already purchased a Digi 002, and have been using it as my interface for Logic Express for about 6 months.  No problems.  I upgraded to Logic Pro 7 last month and now get only garbled sound and the following error message. "Error while trying to synchronize audio and midi.  Sample rate 88215 recognized.  Check conflict between Logic and External Device."
I am trying to run Logic Pro 7.  I still also use Pro Tools LE version 7.0 which runs fine.  I can play itunes songs, Garage Band, movies, Pro Tools songs, etc., no problem, but not Logic Pro, or Logic Express.
When I switch to Built In Audio, Logic Pro works fine through the tiny built in speaker, but trying to use the Digi 002 as my interface all the sound comes out garbled.
I have been pulling out my hair for weeks.  Any help would be much appreciated.

Tony P.M. wrote:
The digi people also recommended buying the update for 7.3 and then updating to 7.3.cs4.  I am going to give that a try.  What does Pro App Support 4.0 do and where do I find it if you think that might help me?
That is what I'm running, and it works great. Give it a shot. You can do a search on this forum, or on the Apple Support section of the website, and search for that term (Pro Application Support).
Yes I have learned my lesson with auto update.  Live and learn.
Yes. Remember, a DAW machine is NOt a regular computer you can do whatever with. Audio software and hardware are finicky creatures that don't play nice if you're messing with their operating system willy-nilly.
I spoke with the Apple Store people today as well.  They suggest I spend $100 and sign up for one on one support and bring the whole **** set up in to the store and let them work on it. Seeing as how I am using a G5 tower, and we are talking about a digi 002 board, that is going to be alot of fun to lug across the mall.   I am just about that desperate though.  Any thoughts on one on one support in store?
LOL!!! they just want your money, and will most defniintely screw up your system. They'll update wrong, install stuff you don't want, and re-configure your system to THEIR liking. Stay away from the genius Bar. When it comes to Pro audio, they really know little or nothing. As an example, I went to my local Apple store recently and asked for a copy of Logic Pro. the helpful guy there responded "Logic what? we don't have that kind of software here."
Thanks for the help.  Again.
You're welcome. Hopefully soon you'll have it up and running.
Cheers

Logic 7.1 + OS 10.4.7 + Digi 002 problem

Hello!
I have a problem.
I just updated my OS to 10.4.7 and to Logic Pro 7.1
At the same time I uninstalled Pro Tools LE 6.4 (which I never used, only used the drivers for the Digi002) and installed Core Audio 7 instead.
Now, the Core Audio Manager can find the Digi 002, but logic, logic setup assistant cant find it. I have unplugged it, deleted preferences files and other things, but nothing seems to help.
Anyone got any suggestions?
Johan Carlsson
Mac G4 Mac OS X (10.4.7) Digi 002, Logic 7.1
Mac G4 Mac OS X (10.4.7) Digi 002

Hello!
I have a problem.
I just updated my OS to 10.4.7 and to Logic Pro 7.1
At the same time I uninstalled Pro Tools LE 6.4 (which I never used, only >>used the drivers for the Digi002) and installed Core Audio 7 instead.
Now, the Core Audio Manager can find the Digi 002, but logic, logic setup >>assistant cant find it. I have unplugged it, deleted preferences files and >>other things, but nothing seems to help.
Anyone got any suggestions?
Johan Carlsson
Are you sure that you are using CAD 6.9.2 with OS
10.4.7?
I read on Digidesigns website that 6.9 will not work
with 10.4
Try reinstalling all of it,but before you do...uninstall all of it...and double-check to make SURE there is nothing left of Digidesign's software anywhere...a pain..but worth it.Also,run your maintenance scripts before the re-install,and then immediately after.
Then...run PROTOOLS first...and set it up correctly.DON'T run Logic first...Then run your AMS (audio-Midi setup) and make sure you have all your harware set up there,and choose under Audio devices to use Digi as the default input and output,but your system's sound can be left as internal.
logic pro should now see the Digi interface.This is due to logic looking at AMS for info as to what audio interfaces are there in the system to begin with.
I hope this helps you,
Nick

Has anyone gotten the Digi 002 to work on Mavericks?

Has anyone gotten the Digi 002 rack to work on OSX Mavericks?
I know it says '002 rack and console are not supported (untested)' according to Avid's site, but I was curious if anyone has got it to run.
I am currently using Logic Pro 9 with it right now under OSX 10.8.5, but would like to upgrade my OS. (Logic Pro X is out until I can find a reliable 32 bit bridge for all of my plugs.)
Thnaks in advance.

the folks at Spashtop sent me a note indicating that its possible to get it to work remotely but they werent particularly clear as to how - especially with an aitport express
heere is the note they sent - but some of the urls dont resolve
Jaff said:
If you are attempting to connect your home computer via 3g or outside network, you will need to get another external ip address and do 3 ports forwarding on router as this link described:
http://support-remote.splashtop.com/entries/514213-how-do-i-connect...
Please confirm your external ip address by visiting this site and put it on ipad profile for outside connection:
http://www.whatismyip.com/
Please check this link to find your home router for more specific help on ports forwarding:(just click top right corner to skip advertisement)
http://portforward.com/english/applications/port_forwarding/Splasht...

Getting inputs on Digi 002 to be seen by Mac OSX Core Audio

Similar Messages

Maybe you are looking for