Getting "Invalid Keychain" error
I was getting an error message saying that iTunes was missing a component. I downloaded iTunes again, and that error is gone. But my AppleTV is no longer appearing and now when I tried to sync my iPhone it said operation cannot be completed because the keychain is invalid, run Keychain Access First Air and try again. I ran KeyChain Access First Aid and no problems were found. Even have gone so far as to reset my keychain to original factory settings, and still cannot get iTunes to work. My iPhone is critical to have for tomorrow and it is not in "emergency only mode" Please help.
I am experiencing the same thing. Does anybody know how to fix this??
Similar Messages
-
Getting invalid password error while logging onto application from frontend
Hi Guys
I am trying to login to one of our clones and i am getting invalid password error.
I ran fndcpass and change my username's password which got changed successfully
But still when i login to application using my username i am getting invalid password error
I am getting the same error if i login as sysadmin
Please suggest to resolve this
thanks !!Hi,
I am trying to login to one of our clones and i am getting invalid password error.What is the application release?
Please post the complete error message -- Also, check Apache log files for details (error_log* and access_log*).
I ran fndcpass and change my username's password which got changed successfullyWhat username password have you changed?
But still when i login to application using my username i am getting invalid password error
I am getting the same error if i login as sysadminDoes this happen when login as any application user?
Please verify that none of those users are end-dated.
Regards,
Hussein -
Trying to update to itunes 11.1 getting invalid signature error message
getting invalid signature error message when trying to upgrade itunes 11.1...help me please?
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Try this - Disable your firewall and anitvirus software temporarily. Then download and install the iOS update.
Cheers, Tom -
TO_CHAR to convert date getting 'Invalid number' error
I am trying to convert a static date value using TO_CHAR function but I can't believe I am not able to do it such a simple conversion.
//Obviously this is easy and everyone would like to give this as an example and this is what I see everwhere on Google and it works.
SELECT TO_CHAR(sysdate, 'YYYY-MM-DD') FROM DUAL;
How can I make it work like this?
SELECT TO_CHAR('2010-JUN-23', 'YYYY-MM-DD') FROM DUAL;
I keep getting "Invalid number" error. I changed my constant date to different formats but none works.Your first literal is not a date, assuming you didn't set NLS_DATE_FORMAT.
So the code should have been
SELECT TO_CHAR(to_date('2010-JUN-23','YYYY-MON-DD'), 'YYYY-MM-DD') FROM DUAL;
Please note DATEs are always converted to VARCHAR2 when you SELECT them, using NLS_DATE_FORMAT.
When you use a DATE string literal it ias always implicitly converted to a real date, by using NLS_DATE_FORMAT.
So if you want all your dates formatted as YYYY-MON-DD, you need to set NLS_DATE_FORMAT to that mask.
Sybrand Bakker
Senior Oracle DBA -
TO_NUMBER getting invalid number error
I want to use TO_NUMBER function to converse some float number,
but the following query always gets invalid number error:
select to_number('12.1073') from dual;
but if I add the format in, it runs as expected:
select to_number('12.1073', '99.9999') from dual;
From the syntax, the format parameter is optional, is it only optional for integers?
Thanks!Same here.
So, or you replace dot by comma, or you change the territory (or nls_numeric_characters) defined for your session :
SQL> select to_number('12.1073') from dual;
select to_number('12.1073') from dual
ERROR at line 1:
ORA-01722: invalid number
Elapsed: 00:00:00.00
SQL> alter session set nls_territory='america';
Session altered.
Elapsed: 00:00:00.00
SQL> select to_number('12.1073') from dual;
TO_NUMBER('12.1073')
12.1073
Elapsed: 00:00:00.00
SQL> alter session set nls_territory='france';
Session altered.
Elapsed: 00:00:00.00
SQL> select to_number('12.1073') from dual;
select to_number('12.1073') from dual
ERROR at line 1:
ORA-01722: invalid number
Elapsed: 00:00:00.00
SQL> alter session set nls_numeric_characters='.,';
Session altered.
Elapsed: 00:00:00.00
SQL> select to_number('12.1073') from dual;
TO_NUMBER('12.1073')
12.1073
Elapsed: 00:00:00.00
SQL> Nicolas. -
Please help getting invalid number error.
Hi Experts,
My requirement is
If DT_ID value of xmlmsg existed in the DT_ID of PART_ID_COLLES table then that record should be processd else should be skipped.
And xmlmsg of PART_ID should start with "A" and followed only by the number then that record should be processed else should be skipped.
And xmlmsg of DD_DAYS should contain only the number and grater than or equal to 0 ,then that record should be processed else should be skipped.
For that I have written this code.
But if I pass dt_id as string value in xmlmsg I am getting invalid number error.
DT_ID of PART_ID_COLLES table is number data type.
SELECT xmlmsg.part_id part_id,xmlmsg.dd_days dd_days,xmlmsg.dt_id dt_id
FROM XMLTABLE(
XMLNAMESPACES(
'urn:schemas-microsoft-com:rowset' as "rs"
, '#RowsetSchema' as "z"
'/z:row[not(@dt_id=following-sibling::z:row/@dt_id and @part_id=following-sibling::z:row/@part_id)]'
PASSING p_dd_days_vals
COLUMNS
ITEM_NO for ordinality
, dt_id VARCHAR2 (20) path '@dt_id'
, part_id VARCHAR2 (25) path '@part_id'
, dd_days VARCHAR2 (20) path '@dd_days'
) xmlmsg,
part_id_colles pic
WHERE REGEXP_REPLACE(TRIM(xmlmsg.dt_id),'^([0-9]+)$|.','\1') = pic.dt_id
AND REGEXP_LIKE (UPPER(TRIM(xmlmsg.part_id)),'^[A][0-9]+$')
AND (TO_NUMBER(REGEXP_REPLACE(TRIM(xmlmsg.dd_days),'^([0-9]+)$|.','\1')) >=0
AND REGEXP_LIKE(TRIM(xmlmsg.dd_days), '^-?[[:digit:],.]*$') ;
Sample message is
<MESSAGES>
<MESSAGE ID="12345">
<MSG_ID>3026900</MSG_ID>
<DT_POSTED>6/20/2013 08:15:48</DT_POSTED>
<POSTED_BY>GPD_MSG_EXTRACTOR</POSTED_BY>
<DT_LAST_QUEUED />
<MSG>
<WORK_SET TRANSACTION_ID="@TRANS_ID" TRANSACTION_TYPE="Batch" IS_ACID="@IS_ACID">
<WORK_UNIT GROUP="dd_days" ACTION="ADD" AFFECTED="dd_days">
<RECORDSET TABLE_NAME="dd_days">
<xml xmlns:s="uuid:BDC6E3F0-6DA3-11d1-A2A3-00AA00C14882" xmlns:dt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882" xmlns:rs="urn:schemas-microsoft-com:rowset" xmlns:z="#RowsetSchema">
<rs:data>
<z:row dt_id="430" part_id="A5556689" dd_days="10"/>
<z:row dt_id="550A" part_id="A8889965" dd_days="20"/>
</rs:data>
</xml>
</RECORDSET>
</WORK_UNIT>
</WORK_SET>
</MSG>
</MESSAGE>
</MESSAGES>
Please help me.
Thanks.Your code has ton of errors. Anyway:
with part_id_colles as (
select 430 dt_id,xmltype('<MESSAGES>
<MESSAGE ID="12345">
<MSG_ID>3026900</MSG_ID>
<DT_POSTED>6/20/2013 08:15:48</DT_POSTED>
<POSTED_BY>GPD_MSG_EXTRACTOR</POSTED_BY>
<DT_LAST_QUEUED />
<MSG>
<WORK_SET TRANSACTION_ID="@TRANS_ID" TRANSACTION_TYPE="Batch" IS_ACID="@IS_ACID">
<WORK_UNIT GROUP="dd_days" ACTION="ADD" AFFECTED="dd_days">
<RECORDSET TABLE_NAME="dd_days">
<xml xmlns:s="uuid:BDC6E3F0-6DA3-11d1-A2A3-00AA00C14882" xmlns:dt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882" xmlns:rs="urn:schemas-microsoft-com:rowset" xmlns:z="#RowsetSchema">
<rs:data>
<z:row dt_id="430" part_id="A5556689" dd_days="10"/>
<z:row dt_id="550A" part_id="A8889965" dd_days="20"/>
</rs:data>
</xml>
</RECORDSET>
</WORK_UNIT>
</WORK_SET>
</MSG>
</MESSAGE>
</MESSAGES>') p_dd_days_vals from dual)
SELECT xmlmsg.part_id part_id,
xmlmsg.dd_days dd_days,
xmlmsg.dt_id dt_id
FROM part_id_colles pic,
XMLTABLE(
XMLNAMESPACES(
'urn:schemas-microsoft-com:rowset' as "rs",
'#RowsetSchema' as "z"
'/MESSAGES/MESSAGE/MSG/WORK_SET/WORK_UNIT/RECORDSET/xml/rs:data/z:row[not(@dt_id=following-sibling::z:row/@dt_id and @part_id=following-sibling::z:row/@part_id)]'
PASSING p_dd_days_vals
COLUMNS
ITEM_NO for ordinality,
dt_id VARCHAR2 (20) path '@dt_id',
part_id VARCHAR2 (25) path '@part_id',
dd_days VARCHAR2 (20) path '@dd_days'
) xmlmsg
WHERE REGEXP_REPLACE(TRIM(xmlmsg.dt_id),'^([0-9]+)$|.','\1') = pic.dt_id
AND REGEXP_LIKE(UPPER(TRIM(xmlmsg.part_id)),'^[A][0-9]+$')
AND TO_NUMBER(REGEXP_REPLACE(TRIM(xmlmsg.dd_days),'^([0-9]+)$|.','\1')) >=0
AND REGEXP_LIKE(TRIM(xmlmsg.dd_days), '^-?[[:digit:],.]*$')
PART_ID DD_DAYS DT_ID
A5556689 10 430
SQL>
SY. -
Getting 'Invalid argument' error while uisng OPEN DATASET. Help!
Hi Experts,
I am trying to read a file from a shared server location using OPEN DATASET as shown below.
OPEN DATASET file_name FOR INPUT IN TEXT MODE ENCODING UTF-8 MESSAGE msg.
The file_name i gave is '
CNSGN-PRE-DM.COM\FUNCTIONAL\INVENTORY.CSV'.
The program compiles perfectly. But when I run the program I am getting 'Invalid argument' error. I have checked the authorization to the server, file name, file availability and everything is fine.
Strangely this code was working fine a week ago.
What could be the problem? Kindly help me!
Thanks
GopalHi Chndrasekhar,
You mean to say the we cannot use OPEN DATASET for reading file in shared server location. For example a shared folder in my PC.
Is there something wrong in the file name path I have given? It started with '//'. Do I have to start the file path wih 'file://..'?
Thanks
Gopal -
Help with updating to 10.5 from 10.3 and getting "invalid signature" error
I am trying to update to iTunes 10.5 so I can sync my new iPhone 4s but I keep getting the error message "invalid signature". I have tried turning off firewall and antivirus as suggested on this forum to no avail. Also going through Tools, Download only produced the same error. Any Suggestions?
I, too, am unable to update to iTunes 10.5 (iPhone 4) OR Safari. Contunally get "Invalid Signature" messages. I have "changed" each Apple, iTunes and Safari application through Add/Change Programs to no avail. I am forwarned removing iTunes from my PC will cause me to lose all my music. Any suggestions?
-
Files deleted using RSC Explorer - now getting "invalid path" error msgs
Yesterday I deleted about 10 images from RSC because (1) they were no longer used in the help project and (2) RH had not deleted them from source control itself. Note: I did not just hide these files - I deleted them.
Today when I try to "get" the whole project, I get error messages for each of those files. Caption: RoboSource Error. Message: "Error - path '[path & filename]' is invalid."
Since these files are in various subdirectories of the project, and RSC refuses to continue getting the rest of the files after it encounters this type of problem, this means I now have to "get" the project directory by directory. Grr.
Ok, so RSC did not like me deleting the files from RSC Explorer. So how do I fix this problem? I tried adding the files back into RSC, but I get a different error message: "Error - node '[path & filename]' already exists." (Um, which is it -- is the path invalid, as claimed by the first error message, or does it already exist, as claimed by the second one?)
I don't know what else to try.
The other (less urgent) question is, if I can't delete old images from RSC Explorer, and RH doesn't see to it that unused images are deleted from source control, then how do I get unused images out of source control?
Any help would be appreciated -- especially quick help! :-)
/EileenWe had already applied the 802 patch.
I don't remember now how I solved this problem (it was back in April I posted it), but it was probably by editing the root.fpj file.
Thank you for your replies!
/Eileen -
Problem updating itunes, keep getting invalid signature error message!!
Trying to update my itunes to latest version, keep getting "itunes has invalid signature" error message, any ideas of how to remedy this?
Many thanks in advance.
Meerkat68I've had this problem for awhile in Windows XP SP3. Last night, the simplest thing occurred to me...here's what I did (and I'm telling because it worked).
1. Clicked on Start
2. Clicked on Control Panel
3. Chose Add/Remove Programs
4. Found Apple Software Updater and clicked Remove, then responded Yes
5. Went to apple.com and clicked on Support, and then Downloads
6. Downloaded the latest version of Safari ONLY
7. Installed Safari (knowing it would install the latest version of Apple Software Update)
8. AFTER the installation was complete, I clicked again on Start, then All Programs
9. then, clicked on Apple Software Update -
Getting Invalid Directory error when saving mailbox edits
I current have two accounts set up for two separate mailboxes (I'm using IMAP) that I had in my old AOL account. Anyway, when I try to edit one of my mailboxes through the Mailbox Behavior tab and try to save it, I get an Invalid Directory error saying that /Users/username/Library/Mail is being used by the other account and consequently, my edits cannot be saved. Any ideas?
CurtCalled Apple support. I basically had to recreate my mail accounts and that fixed the problem.
-
Getting Invalid Cursor error in a procedure
Hi,
I have a procedure(1) which inturn calls another procedure(2) which does some task.
Procedure(1) accepts response from Procedure(2).
The error code of procedure(2) is *0* which is the success response.
Iam getting 0 from Procedure(2).
But still Procedure(1) gives me a Invalid cursor error ( eventhough all the cursors are closed and opened ).
Any suggestion on this????procedure p_create_conn -- Procedure(1) which is the calling proc
is
begin
connectivity_api.p_create_connection -- Procedure(2) called proc
in_scheme_number => in_scheme_number
,in_a_lp_sysid => in_a_lp_sysid
,in_z_lp_sysid => in_z_lp_sysid
,in_interconnect_name => in_interconnect_name
,in_mux_usage => in_mux_usage
,in_mux_type => in_mux_type
,out_a_end_sne => v_out_a_sne_id
,out_z_end_sne => v_out_z_sne_id
,out_sss_id => v_out_sss_id
,out_error_code => out_error_code
,out_error_message => out_error_message
,in_a_port_name => in_a_port_name
,in_a_port_signal => in_a_port_signal
,in_z_port_name => in_z_port_name
,in_z_port_signal => in_z_port_signal
,in_trs_area => in_trs_area
,in_alternate_id => in_alternate_id
,in_dcn_equipment_name => in_dcn_equipment_name
,in_dcn_equipment_id => in_dcn_equipment_id
,in_dcn_equipment_notes => in_dcn_equipment_notes
,in_tcode => in_tcode
if out_error_code != 0 --- Error code from Procedure(2) is 0 in my case
then
raise ex_p_create_connection;
end if;
-- Faliing after success response here
workflow_utils.create_link
in_link_type => 'A'
,in_source_workflow_name => con_wf_scheme_type
,in_source_record_id => in_scheme_number
,in_trigger_state => 'initial'
,in_dest_workflow_name => con_wf_connectivity
,in_dest_record_id => v_out_sss_id
,in_dest_from_state => null
,in_dest_to_state => null
,in_terminate_source => 'N'
,in_terminate_dest => 'N'
,in_user_account_name => v_user
-- in this proc all the cursors have been closed properly.
exception
when ex_p_create_connection
then
null;
when others
then
out_error_code := sqlcode;
out_error_message := sqlerrm;
end p_create_connection;
Is that fine with you???? -
Hi all I am a new developer trying to make the Phone app work. when I try to run the app I get the invalid URL error. I am putting my domain name between the quoetes. Please help
// please insert your web service URL here for exchanging peer ID
private const WebServiceUrl:String =""you must install a peer id registration/lookup service compatible with VideoPhoneLabs' queries onto your web server. a sample service is the "reg.cgi" python script included with VideoPhoneLabs. you must create the database it'll use according to the schema in the script comment and place the database (and the script) in your filesystem with appropriate permissions for your OS and web server. then you give the URL to that web service as the WebServiceUrl constant.
-
Hi ,
i am trying add RSS section with URL http://api.foxnews.com/proxy/content/v2?sort=date desc&omitHeader=true&api_key=cc23011f-3ace-40a4-bb63-bfa654af5bc8&format=full-content-rss.xml&rows=20&q=content_type:article AND image_url:*
AND section_path:fnc/entertainment , and it's giving invalid URL error. like @ Invalid Url, use http or https://[domain]. Please help what's going wrong with this URL content.I've recently deployed an application in Websphere and HTTPServer and have Oracle on the DB back-end. Tim, apparently your login problem happens inside the Websphere. You will have a better chance to ask this question in IBM's forums.
-
Getting invalid value error message
Hello,
I have 4 numeric fields.The user enters dollar amounts in the first 3 fields. I have a FormCalc script in the 4th field that takes fields 2 and 3 from field 1 and display the total. It looks fine until the user hits the submit button. They they get the following error message:
I've checked the Pattern and it's set to this pattern: num{($zzz,zzz,zz9.99)}
What am I missing? Thanks for your help.
MDawnChange the field type to Decimal instead of Numeric.
(OR) change the Data format to Float under the Binding tab for Numeric type field.
Thanks
Srini
Maybe you are looking for
-
I saw that the new version of firefox had come out, and I was prompted to download it. Version 4.0 asked me if it could replace the old version and I said yes. When I discovered my operating system would not support v 4.0, I was unable to find where
-
How to increase the length of a columnin existing publication item
We need to urgently increase the length of three columns in one of the tables that is sent offline as a publication item. I have searched everywhere to see if there is a procedure to see this. I only found process to add/drop columns but not modify t
-
Hi guys, We are using a SRM 5.0 (SAPKIBKT11) with a R/3 4.6C Backend system (Support Package 47). We are trying to transfer a Word-document as an attachment in a SHC to R/3 Backend Pur.Req. As far as we know, we followed the necesary steps documente
-
Hi, We recently upgraded our Sol Man system to EHP1 and we are in the process of Job Shedule Management. We imported few jobs from managed system and while monitoring ,getting error Business Proccess not created. Could any one please tell me one thin
-
SCN Wraps occured diffrently on two Database Servers
Hi , We have 2 development Databases which are on 10g(10.2.0.4) version. DB1 SCN = 4293806110 SCN_BAS=4293806110 SCN_WRP=0 Next it Incremented to SCN = 4299357627 SCN_BAS=4390331 SCN_WRP=1 DB2 SCN = 3418871189 SCN_BAS=3418871189 SCN_WRP=0 Next it Inc