Getting invalid password error while logging onto application from frontend

Hi Guys
I am trying to login to one of our clones and i am getting invalid password error.
I ran fndcpass and change my username's password which got changed successfully
But still when i login to application using my username i am getting invalid password error
I am getting the same error if i login as sysadmin
Please suggest to resolve this
thanks !!

Hi,
I am trying to login to one of our clones and i am getting invalid password error.What is the application release?
Please post the complete error message -- Also, check Apache log files for details (error_log* and access_log*).
I ran fndcpass and change my username's password which got changed successfullyWhat username password have you changed?
But still when i login to application using my username i am getting invalid password error
I am getting the same error if i login as sysadminDoes this happen when login as any application user?
Please verify that none of those users are end-dated.
Regards,
Hussein

Similar Messages

Error while logging into applications in R12(21.1.3)

Hi,
We are getting below error while logging into applications in R12 (12.1.3).
**"You have encountered an unexpected error. Please contact the system administrator for assistance"**
Everytime we face this issue, we will bounce OACORE services then the issue will not occur again.
Can you please help me in finding permanent fix for this issue?
FYI,
I have performed the following debugging steps to check the issue further
1.     Enabled FND diagnostics at the site level .
2.     Added following lines in ocj4.properties file
AFLOG_ENABLED=true
AFLOG_LEVEL=statement
AFLOG_MODULE=% (% captures all - preferable to use products such as fnd, ies, por)
AFLOG_FILENAME=/tmp/test.log
3.     Examined the output from aoltest.jsp. Please find the attached AOL-J diagnostics test file.
Then I have reproduced the issue, and examined all the log files but couldn’t find any error information.
Thanks,
Srinivasulu.

Everytime we face this issue, we will bounce OACORE services then the issue will not occur again.
Can you please help me in finding permanent fix for this issue?
Then I have reproduced the issue, and examined all the log files but couldn’t find any error information. If bouncing the services fixes the issue, then there must be some details about the error in the logs.
R12, 12.1 - How To Enable and Collect Debug for HTTP, OC4J and OPMN [ID 422419.1]
How to enable Apache, OC4J and OPMN logging in Oracle Applications R12 [ID 419839.1]
Thanks,
Hussein

Getting Invalid password message while running catalog utility

Hi,
I am trying to index the modifyTimestamp attribute using catalog utility in OID.
I am using the command as :
./catalog -connect=orcl -add=TRUE -attribute=modifyTimestamp
Enter OID password:
but I am getting Invalid password error when I am entering the super user (cn=orcladmin) password.
Could you please help me in solving this issue.
Also can someone help me in knowing how to check what should be the correct value of connect_string.
I am running this command on Solaris.
Thanks in advance!!
-Nitin

Rohit,
The fix to this is fairly straightforward.
You have input an incorrect path for the -infile parameter when calling cryptotools.
You entered , -infile OracleBIData_HOME/web/config/credentialstore.xml
when it should be, -infile C:\OracleBI\web\config\credentialstore.xml , depending on the absolute physical path to the credentialstore.xml file.
It looks like you were attempting to use either a Nix (unix/linux) path with the forward slashes or you where trying to use a environment variable for "OracleBIData_Home". I can see from the c:\ that you are on a Windows machine so the Nix path won't work. Also if you are attempting to use an environment variable that you have confirmed is indeed set, then you need to use %OracleBIData_HOME% in the command prompt which would look like %OracleBIData_HOME%\web\config\credentialstore.xml
So to answer your question your command should appear as below if I have accessed your path to the OracleBIData home correctly, you may need to change it based on your installation,
C:\OracleBI\web\bin>cryptotools credstore -add -infile C:\OracleBIData\web\config\credentialstore.xml
Just be mindful of your paths and your backslashes vs. forward slashes.
Please mark this as the correct answer to award points if it is or if you read it and it helped you.
Cheers,
Christian

Getting 'Invalid argument' error while uisng OPEN DATASET. Help!

Hi Experts,
I am trying to read a file from a shared server location using OPEN DATASET as shown below.
OPEN DATASET file_name FOR INPUT IN TEXT MODE ENCODING UTF-8 MESSAGE msg.
The file_name i gave is '
CNSGN-PRE-DM.COM\FUNCTIONAL\INVENTORY.CSV'.
The program compiles perfectly. But when I run the program I am getting 'Invalid argument' error. I have checked the authorization to the server, file name, file availability and everything is fine.
Strangely this code was working fine a week ago.
What could be the problem? Kindly help me!
Thanks
Gopal

Hi Chndrasekhar,
You mean to say the we cannot use OPEN DATASET for reading file in shared server location. For example a shared folder in my PC.
Is there something wrong in the file name path I have given? It started with '//'. Do I have to start the file path wih 'file://..'?
Thanks
Gopal

Getting Invalid URL error while creating the app even though it's returning valid content from browser.

Hi ,
i am trying add RSS section with URL http://api.foxnews.com/proxy/content/v2?sort=date desc&omitHeader=true&api_key=cc23011f-3ace-40a4-bb63-bfa654af5bc8&format=full-content-rss.xml&rows=20&q=content_type:article AND image_url:*
AND section_path:fnc/entertainment , and it's giving invalid URL error. like @ Invalid Url, use http or https://[domain]. Please help what's going wrong with this URL content.

I've recently deployed an application in Websphere and HTTPServer and have Oracle on the DB back-end. Tim, apparently your login problem happens inside the Websphere. You will have a better chance to ask this question in IBM's forums.

Getting JBO-34010 error while running the application

Hi,
I have created a small application using Toplink and ADF-RC. When I ran the application I am getting this below error...
oracle.security.jazn.JAZNRuntimeException: JBO-34010: The "model/DataBindings.cpx" descriptor appears in the application classpath more than once:
- file:/home/oracle/jdev/JDev/mywork/MyApp/ViewController/classes/model/DataBindings.cpx
- file:/home/oracle/jdev/JDev/mywork/MyApp/Model/classes/model/DataBindings.cpx
What could be wrong?
Please help me out as I compeltly stuck here.
Message was edited by:
Sreekanth

What is your desired startup page? Is it something like home.html, or index.jsp? Are you opening the application with a URL like:
http://myhost/myapp
If so, you probably need to add the welcome file definitions in your web.xml file. You can find the syntax in the OC4J docs.
John H.

Error while migrating JMS application from Weblogic8.1 to Weblogic10.3

Hi All,
I am migrating my JMS application from weblogic8.1 to 10.3. I'm able to publish and subscribe message from local weblogic server. But when i'm configuring ldap server in weblogic-ejb-jar.xml, while deploying the application itself i'm getting the below error. Same thing working fine in weblogic8.1.
For this am i need to use foreignjms?. If this is the case please let me know how to configure foreignjms in weblogic10.3 server.
below are the details i'm giving in weblogic-ejb-jar.xml:
<message-driven-descriptor>
<pool>
<max-beans-in-free-pool>10</max-beans-in-free-pool>
<initial-beans-in-free-pool>3</initial-beans-in-free-pool>
</pool>
<destination-jndi-name>evtTESTEH3Queue</destination-jndi-name>
<initial-context-factory>com.sun.jndi.ldap.LdapCtxFactory</initial-context-factory>
<provider-url>ldap://192.168.20.18:389/ou=mqseries,o=crimsonlogic.com</provider-url>
<connection-factory-jndi-name>ivtQCF</connection-factory-jndi-name>
</message-driven-descriptor>
Error:
weblogic.application.ModuleException: Exception activating module: EJBModule(evtEJB.jar)
Unable to deploy EJB: JMSTESTEVTEventSubscriberMDBean from evtEJB.jar:
unable to find EndPointFinder for ldap://192.168.20.18:389/ou=mqseries,o=crimsonlogic.com
at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:493)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:107)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:411)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:74)
Truncated. see log file for complete stacktrace
java.lang.AssertionError: unable to find EndPointFinder for ldap://192.168.20.18:389/ou=mqseries,o=crimsonlogic.com
[email protected] on Mar 18, 2009 3:07 AM

Hello TomB,
Could you elaborate a bit on your explanation? I'm having the same problem as talk2srujan. I currently have an application which works fine in weblogic81 and, when migrated to weblogic103, fails at deployment time. The error I get is: unable to find EndPointFinder for tibjmsnaming://host:port
We didn't have to register any foreign servers in weblogic81, should I do this in weblogic103?
Could you also give a pointer to the known bug you mentioned?
Thanks in advance,
Rudra

Error while launcing Planning applications from colloborator Workbench

Hi all,
We are on Demantra 7.3.1, Oracle 11g and we have the following problem:
When trying to launch from Collaborator Workbench any of the applications from the Planning Application tab (ie: Member Management, Business Modeler..) it results in the following error:
*"Can't connect to database ora - 12504: TNS: listener was not given the SERVICE_NAME in CONNECT_DATA".*
I investigated and found that from 11g onwards, the way of using the Hostname adapter has changed.Refer ID 556996.1
I am using a WIN 7 - 64 bit Machine , So I have installed 32-bit client too on my machine .
The tnsnames.ora ( under 32 bit client)*_
*# tnsnames.ora Network Configuration File: C:\Oracle\Client32bit\product\11.2.0\clienthome\network\admin\tnsnames.ora*_
*# Generated by Oracle configuration tools.*
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = GAEA-20)(PORT = 1521))
(CONNECT_DATA =
(SID = ORCL)
Listener.ora file is under the database home
*# listener.ora Network Configuration File: C:\Oracle\database64bit\product*
\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\Oracle\database64bit\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\Oracle\database64bit\product\11.2.0\dbhome_1\bin
\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = GAEA-20)(PORT = 1521))
ADR_BASE_LISTENER = C:\Oracle\database64bit
DEFAULT_SERVICE_listener_name= GAEA-20
Edited by: SenthilMuthuKumar on 03-May-2012 06:43

Hi,
Thanks for your suggestion's here i am going to run the datapump script so while i am running in workbench it is throwing data access error.So as you guy's suggested i created one import format and added this script to that import format which is added to one of my location even it is throwing the same error.I am getting the error at this sentence "strWorkTableName" I want to know what is this where it reflect's?So my question is Is there any difference while running data pump or integration script.Please let me know a detailed navigation steps to run this script's with out data access error to run these kind of scripts.
Note:Again my target is to load the data to planning database through fdqm which i am doing through sql statement's.
Suggest your valuable suggestion's
Thanks in advance...
I am getting the error at this sentence "strWorkTableName" I want to know what is this where it reflect's?

Getting run time error when accessing the file from frontend server using F4.....?

Category               ABAP Programming Error
Runtime Errors         CONVT_NO_NUMBER
Except.                CX_SY_CONVERSION_NO_NUMBER
ABAP Program           ZMM_MIGO_GOODS_ISSUE
Application Component Not assigned
Date and Time          26.05.2014 14:28:30
Short Text
     "C:\Users\SAP\Desktop\MIGO\MIGO.xlsx" cannot be interpreted as a number
What happened?
     Error in the ABAP Application Program
     The current ABAP program "ZMM_MIGO_GOODS_ISSUE" had to be terminated because
      it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     An exception has occurred which is explained in more detail below. The
     exception is assigned to class 'CX_SY_CONVERSION_NO_NUMBER' and was not caught
      in procedure
     "%_SEL_SCREEN_P_FNAME_V" "(FORM)", nor was it propagated by a RAISING clause.
     Since the caller of the procedure could not have anticipated this

HI CHIRUI,
I have changed and tried but still i a getting the same thing..
otherwise please check this i am using some class method i am not getting short dump,but excel file is not getting uploaded.
REPORT ZMM_MIGO_GOODS_ISSUE NO STANDARD PAGE HEADING.
DATA : BEGIN OF IT_DATA OCCURS 0,
         ID(10),
         BLDAT(10),                             " Document Date
         BUDAT(10),                             " Posting Date
         REF_DOC_NO(16),                        " Material Slip No
         DEL_NOTE(16),                          " delivery note
         MATNR TYPE MSEG-MATNR,                 " Material Number
         ERFMG(13) TYPE C,                      " Quantity
         BWART TYPE RM07M-BWARTWA,              " Movement Type
         SOBKZ(1),                              " Special Stock
         WERKS TYPE RM07M-WERKS,                " Plant
         LGORT TYPE RM07M-LGORT,                " Storage Location
         PS_POSID TYPE PS_POSID,                " WBS Element
         COST_CENTER TYPE KOSTL,                " cost center
         ORDER TYPE AUFNR,                      " order number
         SERNR TYPE RIPW0-SERNR,                " Serial Number
        END OF IT_DATA,
        BEGIN OF IT_HEAD OCCURS 0,
          ID(10),
          BLDAT(10),                            " Document Date
          BUDAT(10),                            " Posting Date
          REF_DOC_NO(16),                       " Reference document number
          "HEADER_TXT(25),                       " Header Text
          BWART TYPE RM07M-BWARTWA,             " Movement Type
        END OF IT_HEAD,
        BEGIN OF IT_ITEM OCCURS 0,
          ID(10),
          "ID1(10),
          WERKS TYPE RM07M-WERKS,               " Plant
          LGORT TYPE RM07M-LGORT,               " Storage Location
          VAL_TYPE TYPE BWTAR_D,
          MATNR TYPE MSEG-MATNR,                " Material Number
          ERFMG(13) TYPE C,                     " Quantity
          CHARG TYPE MSEG-CHARG,                " Batch
          BWTAR TYPE BWTAR_D,
          PS_POSID TYPE PS_POSID,                 " WBS Element
          ERFME TYPE MSEG-ERFME,                  " Unit
          COST_CENTER TYPE KOSTL,                " cost center
          ORDER TYPE AUFNR,                      " order number
          CUSTOMER TYPE EKUNN,                    " Account Number of Customer
          SERNR TYPE RIPW0-SERNR,                 " Serial Number
          AMOUNT_LC TYPE BAPI_EXBWR,
          SOBKZ(1),
        END OF IT_ITEM,
          HEADER   LIKE BAPI2017_GM_HEAD_01,
          CODE     LIKE BAPI2017_GM_CODE,
          ITEMS    LIKE BAPI2017_GM_ITEM_CREATE OCCURS 0 WITH HEADER LINE,
          SERIAL   LIKE BAPI2017_GM_SERIALNUMBER OCCURS 0 WITH HEADER LINE,
          RETURN   LIKE BAPI2017_GM_HEAD_RET,
          RET      LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE,
          TESTRUN LIKE BAPI2017_GM_GEN-TESTRUN,
          IT_TAB   TYPE FILETABLE,
          GD_SUBRC TYPE I,
          L_FILE   TYPE RLGRAP-FILENAME,
          IT_RAW   TYPE TRUXS_T_TEXT_DATA,
          COUNT(2) TYPE N,
          TEXT_C(30).
DATA: DATA     LIKE TABLE OF IT_ITEM WITH HEADER LINE.
DATA: IT_TEMP LIKE TABLE OF IT_ITEM WITH HEADER LINE.
DATA: IT_TEMP1 LIKE TABLE OF IT_ITEM WITH HEADER LINE.
DATA: IT_ITEM1 LIKE TABLE OF IT_ITEM WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_FILE TYPE RLGRAP-FILENAME.
*             p_test AS CHECKBOX.
SELECTION-SCREEN: END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
   CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
     EXPORTING
       WINDOW_TITLE = 'SELECT FILE'
     CHANGING
       FILE_TABLE   = IT_TAB
       RC           = GD_SUBRC.
   READ TABLE IT_TAB INTO P_FILE INDEX 1.
START-OF-SELECTION.
   PERFORM GET_EXCEL_DATA.
   PERFORM GET_HEADER_ITEM.
   PERFORM UPDATE_DATA.
*&      Form GET_EXCEL_DATA
*       text
* --> p1        text
* <-- p2        text
FORM GET_EXCEL_DATA .
   CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
     EXPORTING
       INPUT = P_FILE
     IMPORTING
       OUTPUT = L_FILE.
   CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
     EXPORTING
       I_LINE_HEADER        = 'X'
       I_TAB_RAW_DATA       = IT_RAW
       I_FILENAME           = L_FILE
     TABLES
       I_TAB_CONVERTED_DATA = IT_DATA
     EXCEPTIONS
       CONVERSION_FAILED    = 1
       OTHERS               = 2.
   IF SY-SUBRC <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
   ENDIF.
ENDFORM. " GET_EXCEL_DATA
*&      Form GET_HEADER_ITEM
*       text
* --> p1        text
* <-- p2        text
FORM GET_HEADER_ITEM .
   DATA : FLAG(1).
   LOOP AT IT_DATA.
     CLEAR FLAG.
     IF IT_DATA-ID IS NOT INITIAL.
       AT NEW ID.
         FLAG = 'X'.
       ENDAT.
     ENDIF.
     IF FLAG = 'X'.
       MOVE-CORRESPONDING IT_DATA TO IT_HEAD.
       APPEND IT_HEAD.
     ENDIF.
     MOVE-CORRESPONDING IT_DATA TO IT_ITEM.
     APPEND IT_ITEM.
   ENDLOOP.
   DATA[] = IT_ITEM[].
   IT_TEMP[] = IT_ITEM[].
   IT_TEMP1[] = IT_ITEM[].
ENDFORM. " GET_HEADER_ITEM
*&      Form UPDATE_DATA
*       text
* --> p1        text
* <-- p2        text
FORM UPDATE_DATA .
   DATA : COUNT1(10),
          L_QTY TYPE I,
          DAT(10).
   CONCATENATE SY-DATUM+6(2) '.' SY-DATUM+4(2) '.' SY-DATUM(4) INTO DAT.
   LOOP AT IT_HEAD.
     ON CHANGE OF IT_HEAD-ID.
       CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
         EXPORTING
           DATE_EXTERNAL       = IT_HEAD-BUDAT
           ACCEPT_INITIAL_DATE = 'X'
         IMPORTING
           DATE_INTERNAL       = HEADER-PSTNG_DATE.
       IF SY-SUBRC <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
       ENDIF.
       CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
         EXPORTING
           DATE_EXTERNAL       = IT_HEAD-BLDAT
           ACCEPT_INITIAL_DATE = 'X'
         IMPORTING
           DATE_INTERNAL       = HEADER-DOC_DATE.
       IF SY-SUBRC <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
       ENDIF.
       MOVE : '2'                TO HEADER-VER_GR_GI_SLIP,
              'X'                TO HEADER-VER_GR_GI_SLIPX.
*      IF r1 EQ 'X'.
       MOVE '05' TO CODE-GM_CODE.
       HEADER-REF_DOC_NO = IT_HEAD-REF_DOC_NO.
       "HEADER-HEADER_TXT = IT_HEAD-HEADER_TXT.
*      ELSEIF r2 EQ 'X'.
*        MOVE '04' TO code-gm_code.
*      ELSEIF r3 EQ 'X'.
*        MOVE '04' TO code-gm_code.
*      ENDIF.
*      IF p_test = 'X'.
*        MOVE 'X' TO testrun.
*      ENDIF.
     ENDON.
     IT_ITEM1[] = IT_ITEM[].
*delete it_item[] where werks = '' and id = it_head-id.
     DELETE ADJACENT DUPLICATES FROM IT_ITEM COMPARING ID MATNR.
     LOOP AT IT_ITEM WHERE ID = IT_HEAD-ID.
*      ON CHANGE OF it_item-id1.
       COUNT1 = COUNT1 + 1.
       CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
           INPUT = IT_ITEM-MATNR
         IMPORTING
           OUTPUT = ITEMS-MATERIAL.
       MOVE : IT_ITEM-WERKS TO ITEMS-PLANT,
              IT_ITEM-LGORT TO ITEMS-STGE_LOC,
*             it_item-lgort1 TO items-move_stloc,
              IT_ITEM-CHARG TO ITEMS-BATCH,
*            IT_ITEM-VAL_TYPE TO ITEMS-VAL_TYPE,
              'FRESH' TO ITEMS-VAL_TYPE,
              IT_HEAD-BWART TO ITEMS-MOVE_TYPE,
              IT_ITEM-SOBKZ TO ITEMS-SPEC_STOCK,
              IT_ITEM-ERFMG TO ITEMS-ENTRY_QNT,
              IT_ITEM-ERFMG TO ITEMS-ENTRY_QNT,
*            it_item-erfme TO items-entry_uom,
*            it_item-sgtxt TO items-item_text,
*            it_item-exbwr TO items-amount_lc,
              IT_ITEM-PS_POSID TO ITEMS-WBS_ELEM,
              IT_ITEM-PS_POSID TO ITEMS-VAL_WBS_ELEM,
              "IT_ITEM-CUSTOMER TO ITEMS-CUSTOMER,
              IT_ITEM-ERFMG TO L_QTY,
              IT_ITEM-AMOUNT_LC TO ITEMS-AMOUNT_LC,
              IT_ITEM-COST_CENTER TO ITEMS-COSTCENTER,
              IT_ITEM-ORDER TO ITEMS-ORDERID.
*             items-SPEC_MVMT = 'R'.
       CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
         EXPORTING
           INPUT = ITEMS-WBS_ELEM
         IMPORTING
           OUTPUT = ITEMS-WBS_ELEM.
       CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
         EXPORTING
           INPUT = ITEMS-VAL_WBS_ELEM
         IMPORTING
           OUTPUT = ITEMS-VAL_WBS_ELEM.
*      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
*        EXPORTING
*          input = it_item-lifnr
*        IMPORTING
*          output = items-vendor.
       APPEND ITEMS.
*      ENDON.
     ENDLOOP.
     DELETE ADJACENT DUPLICATES FROM IT_TEMP COMPARING ID MATNR.
     DELETE IT_TEMP1 WHERE ID <> IT_HEAD-ID.
     DELETE IT_TEMP WHERE ID <> IT_HEAD-ID.
     DATA: MAT_ITM TYPE MBLPO,
           SERNP TYPE SERAIL.
     MAT_ITM = '0001'.
     LOOP AT IT_TEMP.
       SELECT SINGLE SERNP FROM MARC INTO SERNP WHERE MATNR = IT_TEMP-MATNR.
       IF SERNP IS NOT INITIAL.
         LOOP AT IT_TEMP1 WHERE ID = IT_TEMP-ID AND MATNR = IT_TEMP-MATNR.
*    MOVE : it_item1-id TO serial-matdoc_itm,
*     MOVE : mat_itm TO serial-matdoc_itm,
           SERIAL-MATDOC_ITM = MAT_ITM .
           SERIAL-SERIALNO   = IT_TEMP1-SERNR.
           APPEND SERIAL.
           CLEAR IT_ITEM1.
         ENDLOOP.
         MAT_ITM = MAT_ITM + 1.
       ENDIF.
       CLEAR IT_TEMP.
     ENDLOOP.
     CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
       EXPORTING
         GOODSMVT_HEADER       = HEADER
         GOODSMVT_CODE         = CODE
         TESTRUN               = TESTRUN
*       GOODSMVT_REF_EWM      =
       IMPORTING
         GOODSMVT_HEADRET      = RETURN
*       MATERIALDOCUMENT      =
*       MATDOCUMENTYEAR       =
       TABLES
         GOODSMVT_ITEM         = ITEMS
         GOODSMVT_SERIALNUMBER = SERIAL
         RETURN                = RET
*       GOODSMVT_SERV_PART_DATA =
*       EXTENSIONIN           =
     CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
       EXPORTING
         WAIT = 'X'
*   IMPORTING
*       RETURN        =
     IF NOT RETURN IS INITIAL.
       WRITE :/ 'Material Document Number Generated: ' ,RETURN-MAT_DOC,RETURN-DOC_YEAR.
     ELSE.
       LOOP AT RET.
         WRITE : RET-TYPE,    RET-MESSAGE.
*      log-index = sy-index.
*      log-matnr = header-material.
*      log-message = ret1-message.
*      APPEND log.
       ENDLOOP.
     ENDIF.
     REFRESH : ITEMS,RET.
     CLEAR : HEADER,RETURN.
     CLEAR: TESTRUN ,
            RETURN,
            ITEMS[],
            SERIAL[],
            RET[],
            HEADER,
            IT_TEMP[] ,
            IT_TEMP1[].
     IT_TEMP[] = DATA[].
     IT_TEMP1[] = DATA[].
   ENDLOOP.
ENDFORM. " UPDATE_DATA
Regards,
Suresh bheema

Getting Invalid Address Error while trying to order iPhone

I don't knoe what';s going on and I wish I could talk to a real live person but I am trying to pre-order the iphone and it won't accept any way that I enter my address.
My billing and shipping addresses are different, but even when I made them the same, I got and error! Help PLEASE! I want to go back to bed! Thank you =)

I don't knoe what';s going on and I wish I could talk to a real live person but I am trying to pre-order the iphone and it won't accept any way that I enter my address.
My billing and shipping addresses are different, but even when I made them the same, I got and error! Help PLEASE! I want to go back to bed! Thank you =)

Error while accessing an application from logon page

Hello all,
I have created an application on WD Java which inturn talks to my ECC at the backend. I want to fix on my portal Logon Page, i have attached the location to an ivew which as Anonymous access still i am not able to open the link ..the error say access denied.
when i attach this application inside the portal on some role i am able to open the link ....
following is the error which is seen, please help
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/hr_portal_folder/iviews/com.rr.ess.java_local_PasswordResetPr_com_password_reset_PasswordReset
Component Name : com.sap.portal.wdintegrator.WebDynproIntegrator
Problem creating the Application Integrator, exception occured during onNodeReady was: com.sapportals.portal.prt.runtime.PortalRuntimeException: Access is denied: com.sap.portal.appintegrator.sap.WebDynproPageBuilder - user: Guest, .
Exception id: 01:13_31/08/07_0081_14574951
See the details for the exception ID in the log file

HI!
Are you aware of note https://service.sap.com/sap/support/notes/1031159 and did you follow the steps?
Rgs, Sigi

I am getting ORA-02063 error while copying bulk data from DBLINK

Hi all ,
I am trying to copy data from DBlink ,whenever i am trying to pull more data ,The db link break down ,
I have try to put /*+ APPEND */ (Hint) in insert statement.Below is the insert code from my procedure
from where i am getting below error
"Error in copy_data_pkg-3113 ORA-03113: end-of-file on communication channel
ORA-02063: preceding line from TESTDBLINK"
Insert code:
INSERT /*+ APPEND */ INTO target_tab
select
col1,
col2,
col3,
col4,
col5,
o_time
FROM padmin.V_tab1@testdblink
    where
trunc (sysmodtime) = trunc(sysdate)-1
and O_time >= al_time
and (CLEAR_TIME is null or CLEAR_TIME >= occur_time)
    and (res_code is null or (UPPER(res_code) not LIKE '%TEST TT%' and UPPER(res_code) not LIKE '%TEST SITE%'))
    and ((UPPER(BRIEF_DESC) not like '%TEST TT%' and UPPER(BRIEF_DESC) not LIKE '%TEST SITE%'))
    and (o_time+(330/(24*60))) <= trunc(SYSDATE)-1/24/60/60
    and catvar IN('POS')
and UPPER(action_var) not like '%SC_NET%' and UPPER(action) not like '%ROAM_NET%' and UPPER(action) not like '%PUP_NET%';
COMMIT ;
Please suggest me ,why i am getting this error.

Can you elaborate the thing... I don't think /*+ APPEND */ this is working for me ,still I am getting same error.
If you have any other suggestion,I would like to hear.
Should i not put commit after some 500 records inserted ? As i am putting commit once after whole data gets inserted.

Error while deploying my application

Hi,
I am getting the following error while deploying my application.
com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'password' missing
    at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:457)
    at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1015)
    at com.sap.mw.jco.JCO$Client.connect(JCO.java:3255)
    at com.sap.dictionary.runtime.mdi.DataProvider.<init>(DataProvider.java:91)
at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:319)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:687)
     at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
     at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
Thanks ,
nadh

Hi Nadh,
This is the code to execute RFCst
Z_Notification_Create_Input input = new Z_Notification_Create_Input();
wdContext.nodeZ_Notification_Create_Input().bind(input);
wdContext.currentZ_Notification_Create_InputElement().modelObject().addFlines(longText);
wdContext.currentZ_Notification_Create_InputElement().modelObject().execute();
Best regards,
Chinnu

Error while installing an application into different work spaces in APEX

Hi All,
I am getting an below error while installing the application in the same workspace.APEX Version i am using is 4.0.2
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 6, column 41: PLS-00103: Encountered the symbol &amp;quot;PK &amp;quot; when expecting one of the following: ( - + case mod new not null &amp;lt;an identifier&amp;gt; &amp;lt;a double-quoted delimited-identifier&amp;gt; &amp;lt;a bind variable&amp;gt; continue avg count current exists max min prior sql stddev sum variance execute for
i have checked different ways.But i could not able to resolve it :(
Someone please help me as early as possible...URGENT

Hi,
Thanks for the reply.
For example,the 112 application which i want to copy is having 129 pages.
The application is working great and is having no errors
When i am trying to copy/import this application by auto assigning application iD ,its throwing an earlier mentioned error.
For every page,im using different scripts.
Is that code error?

Error while logging into BI Publisher

Hello All,
I get the below error while logging into BI Publisher with the Default credentials
"oracle.apps.xdo.servlet.resourc eNotFoundException: %s_Reports_Path%/Admin/Security/principals.xml "
Any inputs on this is highly appreciated.
Thanks,
Vasavi

Hi ,
Check the following thread
BI Publisher login fails
May be the same issue is sloved...
Thanks,
Ananth

Getting invalid password error while logging onto application from frontend

Similar Messages

Maybe you are looking for