Getting Location of Report File

In a Report I need to know where the Report-File is located (full path) but I didn't find any Variable or Built-In which tells me that.
I need that to dynamically change the path of my DTD- and XML-File the Report uses. I can't hardcode that because for every customer we have the deployment may be different (directory structure).
Any clues?

Hello Thomas,
Thanks for your reply. Actually I had used JavaScript to just test whether file is uploaded successfully or not (also want to confirm whether this function creates a file in some directory of server or passes the contents of the file to server).
According to you do I need to create a custom transformation which will take input as byte stream and return required XML output?
I checked the SAP help which gives information about that transformation 'id'.Also I tried to included that code as
data ?= CL_HTMLB_MANAGER=>GET_DATA(
                       request = runtime->server->request
                       name    = 'fileUpload'
                       id      = 'myfileupload1'
IF data IS NOT INITIAL.
f_content      = data->file_content.
call transformation id
source SOURCE = f_content
result xml XML_STRING.
endif.
and then on view <htmlb:textView><%=XML_STRING%> but still it prints binary string itself.
Regards
Rajeev Patkie

Similar Messages

Get report file name

i am using 9ids
i use
web.show_document() to run report.
now report gets generated into cache and then it is viewed. now i want two things.
1) i want to get the genrated report file name.
2) copy that file to user-end.
through webutil.
pls help me how or give me function/procedure to do this.
thanks.
now report has run.
please guide me further how to get file name from report/cache.
and download into user-end.

Rajendra,
webutil can download files based on a URL. Just provide the URL that you usually put into web.show_document() to webutil.
From the comments in webutil.pll:
* DownLoadFromURL - pulls a file from the specified URL on * the server and sends it via http to the specified destination
* on the client
* If you specify file size we can so a comparison after
* download to ensure that the sizes match
* Additionally of you specify withProgress and size you
* will get a progress bar
* Note that the Title, subtitle and message strings cannot
* contain the '|' character
FUNCTION DownLoadFromURL(sourceURL in VARCHAR2,
clientDestination in VARCHAR2,
fileSize in PLS_INTEGER default 0) return BOOLEAN;
FUNCTION DownLoadFromURLWithProgress(sourceURL in VARCHAR2,
clientDestination in VARCHAR2,
fileSize in PLS_INTEGER,
progressTitle in VARCHAR2,
progressSubTitle in VARCHAR2,
progressMessage in VARCHAR2) return BOOLEAN;
Frank

Report File Path Directory

How can i get the definitive report file path in teststand V3.0

Hi,
The report file path is generated inside of the process model. If you look at the Test UUTs entry point inside of the SequentialModel.seq, you will see a C/C++ Adapter step called "Determine Report File Path". After this step executes, the variable Locals.ReportFilePath inside of the entry point contains the full path to where the report will be saved. Let me know if this is what you are looking for.
Ryan

Invalid report file path.

I have a .NET C# Web App with embedded Crystal Reports (version 10.2.3600) running on Windows Server 2003 Standard Edition (Service Pack 2). Every few days the reports generate errors and we have to restart IIS to get them to run again. I cannot figure out what is causing the system to lock up. The error I am getting is 'Invalid report file path.' Do you know what would cause this to happen?

this is the C# code we used to fix this issue:
private ReportDocument CrystalRpt;
    //Declaring these here and disposing in the Page_Unload event was the key. Then the only other issue was the
    // limitations of Crystal 11 and simultaneous access to the rpt file. I make a temp copy of the file and use that in the
    // method. Then I delete the temp file in the unload event.
    private ReportDocument mySubRepDoc;
    private ReportClass ReportObject;
    private string tmpReportName;
    protected void Page_UnLoad(object sender, EventArgs e)
Try
            CrystalReportViewer1.Dispose();
            CrystalReportViewer1 = null;
            CrystalRpt.Close();
            CrystalRpt.Dispose();
            CrystalRpt = null;
            mySubRepDoc.Close();
            mySubRepDoc.Dispose();
            mySubRepDoc = null;
            ReportObject.Close();
            ReportObject.Dispose();
            ReportObject = null;
            GC.Collect();
            File.Delete(tmpReportName);
catch
{ ...Error Handler }
protected void Page_Load(object sender, EventArgs e)
        CrystalRpt = new ReportDocument();
        ConnectionInfo CrystalConn = new ConnectionInfo();
        TableLogOnInfo tblLogonInfo = new TableLogOnInfo();
        ReportObject = new ReportClass();
        TableLogOnInfo CrystalLogonInfo = new TableLogOnInfo();
        ParameterField CrystalParameter = new ParameterField();
        ParameterFields CrystalParameters = new ParameterFields();
        ParameterDiscreteValue CrystalParameterDV = new ParameterDiscreteValue();
        TableLogOnInfo ConInfo = new TableLogOnInfo();
        SubreportObject mySubReportObject;
        mySubRepDoc = new ReportDocument();
        //Report name is sent in querystring.
        string ReportName = Request.QueryString["ReportName"];
        // I did this because Crystal 11 only supports 3 simultaneous users accessing the report and
        // we have up to 60 at any time. This copies the actual rpt file to a temp rpt file. The temp rpt
        // file is used and then is deleted in the Page_Unload event
        Random MyRandomNumber = new Random();
        tmpReportName = ReportName.Replace(".rpt", "").Replace(".ltr", "") + MyRandomNumber.Next().ToString() +".rpt";
        File.Copy(ReportName, tmpReportName, true);
        CrystalRpt.Load(tmpReportName);

Locating Crystal Reports

I'm having a problem with locating my report files. In the config file I have ../.. setup and my report are located relative to my Application root. The probem I am seeing is the application seems to be looking for the files relative to the <server>/.wlnotdelete/extract/<earFile>_<appName>/jarfiles/WEB-INF/lib directory as opposed to the
<server>/.wlnotdelete/<earFile>/<appName>/WEB-INF/lib driectory which makes it impossible to see my report that are in a directory within the application context.
Is there a server config param to keep the jarfile from being copied? Or another posible solution?

I have Crystal Reports XI R2 .Net Server 2005 installed. I don't think this SP5 https://smpdl.sap-ag.de/~sapidp/012002523100013876392008E/crxir2win_sp5.exe is the correct version for what I have installed.
Is there a patch for the ADO.NET Slow Performance issue for Crystal Reports XI R2 .Net Server 2005?
Thanks

Getting Report File Path location at execution in TestStand 2012 and later

I need to include PNG pictures into my TestStand Report (HTML, XML, ATML).
When report generation was made through plugins (before TestStand 2012), it was easy to get report file location during execution through variable RunState.Root.Locals.ReportFilePath in order to save PNG files near the report file (in same directory).
I didn't find yet an easy an simple way to do the same in TestStand 2012 with Result Processing Plugins.
Any idea ?
Remarks :
Since this functionnality has to be included within MESULOG TS+ last version which is a TestStand Add-on, I cannot modify Report Options, Process Model or include a callback (like GetReportFilePath.
In need ReportFilePath within a Custom Step Type which cannot wait for PostUUT or ReportGeneration to save its PNG files.
Jean-Louis SCHRICKE
├ CTA - Certified TestStand Architect (2008 & 2010 & 2014)
├ CTD - Certified TestStand Developer (2004 & 2007)
└ CLD - Certified LabVIEW Developer (2003 & 2005)

jiggawax,
Thank you for you quick answer.
RunState.Root.Locals.ModelPluginConfiguration.Plugins[<plugin index>].PluginSpecific.Options.Directory is valid only if
RunState.Root.Locals.ModelPluginConfiguration.Plugins[<plugin index>].PluginSpecific.Options.DirectoryType is set to "SpecificDirectory".
It seems that I cannot get the complete ReportFilePath before "UUT Done" plugin entry which is after MainSequence execution.
Jean-Louis SCHRICKE
├ CTA - Certified TestStand Architect (2008 & 2010 & 2014)
├ CTD - Certified TestStand Developer (2004 & 2007)
└ CLD - Certified LabVIEW Developer (2003 & 2005)

Error when running oracle report - Cannot locate the font file 'arial.ttf'

Hello
I am running a report and I am getting the following error. Terminated with error: <br>REP-3316: Cannot locate the font file 'arial.ttf' REP-1924:
Any help appreciated.
David

Hello,
REP-1924: Cannot locate the font file '<filename>'Cause:
The font file specified in UIFONT.ALI is not found.
Action:
Make sure that the font file exists in REPORTS_PATH.
So, it seems that you are using DESFORMAT=PDF and that subsetting has been configured in the file uifont.ali
In this case, a file arial.ttf must exist in a directory of REPORTS_PATH
regards

New-Cluster Report file location

Hi All,
I’m creating a cluster with new-cluster cmdlet and I need this to be a silent run.
New-Cluster
-Name $ClusterName
-Node $Node1,
$Node2,
$Node3 -NoStorage
-StaticAddress $IPAddress,$IPAddress2
*>&1 |
Out-Null
But I can’t get around the following output: Report file location: C:\Windows\cluster\Reports\Create Cluster Wizard <servername> on 2015.04.07 At 13.32.33.mht
I have tried it with:
$WarningPreference
= "SilentlyContinue"$VerbosePreference
= "SilentlyContinue"$DebugPreference
= "SilentlyContinue"$ProgressPreference
= "SilentlyContinue"
$leeg
= New-Cluster
-Name $ClusterName
-Node $Node1,
$Node2,
$Node3 -NoStorage
-StaticAddress $IPAddress,$IPAddress2
*>&1 |
Out-Null
$leeg
= New-Cluster
-Name $ClusterName
-Node $Node1,
$Node2,
$Node3 -NoStorage
-StaticAddress $IPAddress,$IPAddress2
-verbose:$False
-Debug:$False
-OutVariable out
-WarningAction SilentlyContinue
-WarningVariable wout
| Out-Null
But I keep getting the following output on screen:
Report file location: C:\Windows\cluster\Reports\Create Cluster Wizard <servername> on 2015.04.07 At 13.32.33.mht
Best regards,
Chris

Hi Chris,
this is due to non-conformance with PowerShell best practices by the coder of the FailoverCluster-Module developer.
New-Cluster writes directly to the host and thus can't be suppressed this way.
You may have more luck handling this odd output by running this command within a job or runspace.
Cheers,
Fred
There's no place like 127.0.0.1

Every time I try to upload MOV files from my iphone 5s onto my adobe premiere elements on windows 8 i get 'the importer reported a generic error'

every time I try to upload MOV files from my iphone 5s onto my adobe premiere elements on windows 8 i get 'the importer reported a generic error'

jade harding
What version of Premiere Elements are you using on Windows 8.1 64 bit? For now I will assume Premiere Elements 12 in a NTSC set up.
Your iPhone 5s video is expected to be 1080p @ 30 progressive frames per second? Do you confirm that? Because of the source of your video, it is highly likely that you are dealing with a variable frame rate.
Please give the following a try to see if you then have an "importable" product to take into Premiere Elements presumed 12/12.1.
Download and install the free HandBrake program.
http://handbrake.fr/
Import your video file into the program.
Make sure you browse to and set Destination (suggested Desktop location)
Go to the Video Tab and set
Video codec = H.264 (x264)
Frame Rate = 29.97
put a dot next to Constant for the Frame Rate
Click on the Start at the top left of the workspace
Wait for the "Queue Finished" to appear in the progress bar at the bottom left of the workspace.
Then see if this H.264.mp4 (1920 x 1080 @ 29.97 progressive frames per second file can be imported into Premiere Elements 12 project with a manually set project preset of NTSC/DSLR/1080p/DLSR 1080p30@ 29.97.
Details for setting manual project preset can be found in
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
The details that I have posted in this reply are customized for Premiere Elements and should work fine for you.
We will be watching for your results.
ATR

[LV - TS] How to execute a SEQ file, get the result (PASS/FAIL) and the report file ?

Hello,
I'm looking for the most obvious and simple way to, from Labview :
1- Start the Teststand engine : DONE
2- Get a list of SEQ files to execute : DONE
3- Loop through the list to execute each SEQ file : <- found some examples but I have some trouble with the UIMessage stuff
http://zone.ni.com/reference/en-XX/help/370052N-01/tsexamples/infotopics/executing_sequences_using_api_labview/
4- Get the result of the SEQ execution : <- unsure
5- Get the XML path+name of the report file generated : <- obviously not easy
http://digital.ni.com/public.nsf/allkb/3D3B2358DF9B786B8625789500549A3B
http://forums.ni.com/t5/NI-TestStand/Getting-Report-File-Path-location-at-execution-in-TestStand-2012/td-p/3041789
Here is my current implementation :
David Koch

Hello,
I tried to work from this example :
http://forums.ni.com/t5/NI-TestStand/Execution-of-TestStand-Sequence-in-LabVIEW-via-TS-API-Different/td-p/2939616/page/2#M46686
However it remains unclear about how to get a simple
answer from just running a sequence file out of any
model so far (Simple Pass). Like I told you, all what
I need, once the TS engine is started, is a VI with the
following interface :
INPUT
1- TS engine reference
2- SEQ file path (path or string)
3- Sequence name to execute
4- UUT string (optional, but yeah)
5- error in
OUTPUT
1- Result boolean (PASS/FAIL)
2- Path to XML report
3- error out
It would be so cool to just have this
About the surrounding UI, I'm working on it. The LV
code is not really important at this point, it's running
a SEQ file that matters to me.
David Koch

TestStand 2012 Report File Location variable

Hi,
In TestStand 2010 SP1, I have the "report file path" as one of the column into the database using the RunState.Report.Location. This has been working until I upgraded to TestStand 2012. The RunState.Report.Location is always empty. I also tried to use the RunState.Root.Locals.ReportFilePath but I get an error that this is an unknow variable when logging to the database. Even when removing the <UUTStatus> from the file path expression below, there is no difference.
I am using the following report file path expression:
"C:\\TSReports\\<UUTStatus>\\<ClientFileName>_Report[<FileDate>][<FileTime>][UUT]_<UUTStatus>.<FileExtension>"
Which variable contains the report file path in TestStand 2012.
Solved!
Go to Solution.

I haven't tried it, but RunState.Report.Location might work if you set the New Thread option on the Report and Database to False (assuming the report is first in the list) so you can be sure that the Report has been generated before you check that value.
You have to set the Configure>>Result Processing>>Show More Options to see the New Thread options.
This should give you access to the path of the Displayed report (the one with the checkmark in the Display column). However, in TS 2012, you can have any number of reports.
There is a new callback, GetReportFilePath, you can add to your sequences to obtain the report paths as they are determined. You could store the paths in a station global or runtime variable for later use if needed.

TS1717 iTunes will not open. I get a message that says, "The iTunes Library.itl file cannot be found or created. The default location for this file is in the "iTunes" folder in the music folder." How can I fixt this?

iTunes will not open. I get a message that says, "The iTunes Library.itl file cannot be found or created. The default location for this file is in the "iTunes" folder in the music folder". How can I fix this?

Hi pgarard1,
If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
http://support.apple.com/kb/TS2363
Regards,
- Brenden

I am trying to open iTunes on my Windows 7 PC and am getting the following message...the itunes library can not be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder. Any ideas?

I am trying to open iTunes on my Windows 7 PC and am getting the following message...the itunes library can not be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder. Any ideas?

Let's try this first. Hold down the Shift key while you try to launch iTunes. You should eventually see the following dialog:
Click "Choose library". Browse to inside the following location (depending on what operating system you're running):
Operating System
Default location of iTunes library
Microsoft Windows XP
\Documents and Settings\[your username]\My Documents\My Music\iTunes\
Microsoft Windows Vista
\Users\[your username]\Music\iTunes\
Microsoft Windows 7
\Users\[your username]\My Music\iTunes\
... and open the iTunes library you find in there.

I keep getting the following message The iTunes library cannot be found or created. The default location for this file is in the iTunes folder in the music folder.

I keep getting the following message The iTunes library cannot be found or created. The default location for this file is in the iTunes folder in the music folder. All of my playlists have disappeared and I am trying to recover them however I now can't even open iTunes!

Hi crazymaiden,
I have two articles for you here that should be able to help you troubleshoot this issue with your ability to launch iTunes:
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/HT2311
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Get report file name in oracle report builder at run time

Dear All,
Is there any way to get the report file name in oracle report builder at run time?
for example "HR_REP012.REP"
i need this very important...
Regards,
Yousef
Edited by: Yousef_m on Jun 2, 2012 5:18 AM

Hello,
Did you try the builtin SRW.GET_REPORT_NAME built-in function ?
Example
function AfterPForm return boolean is
my_var varchar2(80);
BEGIN
SRW.GET_REPORT_NAME(my_var);
SRW.MESSAGE(0,'Report Filename = '||my_var);
RETURN (TRUE);
END;
Regards

Getting Location of Report File

Similar Messages

Maybe you are looking for