Getting lots of "NetStream.Play.InsufficientBW" when there's plenty of Bandwidth

Hi All,
We've upgraded our production servers to 3.5.3 on Windows 2008, and now I'm seeing a lot of "NetStream.Play.InsufficientBW" statuses in our client app's log. The server is streaming a very low bandwidth live video/audio stream, and the client has more than plenty of bandwidth to play it. The stream doesn't exhibit any audio drops or skipped frames, and there are no message drops on the server side. We have had clients complaining of random disconnects. Does anyone know why I might be getting this message? If anyone from Adobe could help with this, I'd greatly appreciate it. Thank you.
Best,
-Costin

Hi Asa,
Thanks for the reply!
Unfortunately, I already had this in my Application.xml and it was still doing it:
<Queue enabled="false">
Any other work arounds at this time?
In addition, I'm getting reports that users are getting disconnected. After some arbitrary time, the server issues a "NetConnection.Connect.Rejected" for no reason, or at least none that I can find. Is this also a known issue? Please advise, since this is happening on our production systems. Should I roll back to 3.5.2?
Thank you!
-Costin

Similar Messages

NetStream.Play.InsufficientBW when streaming server side playlist

Hi
I am streaming pre recorded audio files (mp4) to an AIR client. I have tried two different solutions,
streaming the file directly with the NetStream.play("mp4:xxxxx.m4a") and creating a server side playlist, adding the
same sound clip and then streaming the playlist. The problem is, when streaming the playlist i get a few NetStream.Play.InsufficientBW, this does not happen when streaming the file direct. Both solutions uses bufferTime=1.0
I would like to use a server side playlist to implement a simple key solution so that the client dont know the full path to
the file, but instead sends a key to a custom server side function that looks up the file path and creates a stream for the client.
TIA
Ruben Chadien
FMS 4.0(linux)

Subscribing via playlist and playing file directly are two different things , as first one is live mode of play while other is playing recorded file - so the way streams are delivered are also quite different. Can you try setting higher buffer and see if that helps or if you don't want to set higher buffer, see if disabling AggregateMessages (you will find the tag in Application.xml under Live/Queue) helps

"NetStream.Play.InsufficientBW" dispatched when there's plenty of Bandwidth

Hi,
     I am working on the Audio-Video application having two Flash Media Server, One is Flash Media Interactive Server and another is Flash Media Streaming Server.
I am publishing stream on Flash Media Streaming Server and receiving stream from Flash Media Streaming Server. Flash Media Interactive Server publish stream to live folder
"rtmp://xxx.xxx.xx.xx/live" Flash Media Streaming Server from server side code.
when application.onPublish of Interactive server dispatch then the stream published by interactive server has been republished to live of the streaming server and from there client receive stream by
making connection with live folder of Streaming server. Stream from streaming server received successfully but .....
After few minute at receiving side receiving netStream Object dispatch "NetStream.Play.InsufficientBW" and stop receiving stream.
Please help if anyone know any solution.
Thanks.

Hi,
          I want to add more to above, that for testing purpose I am using Flash Media Developement server as the Flash Media Interactive Server and Flash Media Streaming Server.
Thanks

How do I get Cross Dissolves to work even when there is plenty of media

I have 10 minute movie with many different video segments. I have added cross dissolves throughout the movie, and many go in with no problem, I just drag and drop them, and then I can easily drag the dissolve longer or shorter. However, on about half of the clips, I can't add a dissolve. There is plenty of media available (most clips are about 10 or 15 seconds long). It won't let me drop a cross dissolve at all. Sometimes, it lets me drop the dissolve, but only on one of the two clips I want it, and when that happens, the dissolve is very short and it won't let me extend it. Again, there is plenty of media available, and it will let me use the dissolve on about half of the clips (all the clips are pretty much the same--same source, same file type, same length, etc.). I've tried some suggestions online, but most suggest that the problem is with available media--I don't think that's my problem. Any suggestions?

+I've tried some suggestions online, but most suggest that the problem is with available media--I don't think that's my problem. Any suggestions?+
You don't have enough media.
Move your IN point a few seconds into the clip, and then drop it into the timeline.
Now apply dissolve
Niel

When I synch my ipod touch it only lets 50 videos get on ipod . I can't get the other videos on even though there's plenty of space available and it's set to synch all movies

When I synch my ipod touch it only lets 50 videos get on ipod . I can't get the other videos on even though there's plenty of space available and it's set to synch all movies. What am I missing?

i had the same problem. did a lot of research..my phone became unusuable. do you use the htc mail? if so that is your problem. there is a bug with it that it keeps eating your memory until you cannot use your phone. i had to do a hard reset. back to factory condition..not happy! but then went to the marketplace and got k-9 mail. that is now my default mail program. i have not had any issues since then. this is what i kept reading over and over for complaints on this phone. it is a major glitch and the only way, as of the time it happened to me, to fix it..

How do get rid of the twitter app when there's no trace of it except for update notices on app store and that too with a stranger's id ??

How do get rid of the twitter app when there's no trace of it except for update notices on app store and that too with a stranger's id ??

ayk74,
so you have no idea where some of your installed software originally came from?

[svn:osmf:] 14601: Fix bug where parsing of stream that gets passed to NetStream.play doesn' t take urlIncludesFMSApplicationInstance into account, resulting in stream not found error.

Revision: 14601
Revision: 14601
Author:   [email protected]
Date:     2010-03-05 09:47:28 -0800 (Fri, 05 Mar 2010)
Log Message:
Fix bug where parsing of stream that gets passed to NetStream.play doesn't take urlIncludesFMSApplicationInstance into account, resulting in stream not found error.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/net/NetStreamPlayTrait.as
    osmf/trunk/framework/OSMF/org/osmf/net/NetStreamUtils.as
    osmf/trunk/framework/OSMF/org/osmf/net/dvr/DVRCastNetConnectionFactory.as
    osmf/trunk/framework/OSMFTest/org/osmf/net/TestNetStreamUtils.as

I had a while ago similar problem with USB memory stick. At the end, I don't know why, just formatting it using WinXP helped me.
S-
Last edited by StenM (2011-07-22 17:56:32)

My mac won't save to a flash drive. It always says the disc is full when there is plenty of space. Solution pls?

My mac won't save to a flash drive. It always says the disc is full when there is plenty of space. Solution pls?

Hi and welcome to Apple Discussions,
Did you get the flash drive from a reliable source. There are some available on the net that show a large capacity but are only 512 mb. or 1 gb. drives that have been altered to display a much larger capacity.
Good luck,
Alan

Database Instance Using Swap Space even When There is Plenty of Free RAM

Hi,
I am facinga strange issue in oracle on solaris 5.10
Platform:solaris 5.10
Database version:11.2.0.1.0
Our database Instance Using Swap Space even When There is Plenty of Free RAM.
We have 80GB of physical RAM, 32GB is set to oracle SGA_MAX_SIZE
memory parameters:
memory_max_target big integer 32G
memory_target big integer 32G
sga_max_size big integer 32G
sga_target big integer 32G
but still oracle is taking memory from swap even though we have enough physical memory.
please find the top output
load averages: 0.09, 0.18, 0.84 01:07:49
134 processes: 133 sleeping, 1 on cpu
CPU states: 99.4% idle, 0.4% user, 0.3% kernel, 0.0% iowait, 0.0% swap
Memory: 80G real, 69G free, 35G swap in use, 49G swap free
PID USERNAME LWP PRI NICE SIZE RES STATE TIME CPU COMMAND
1052 oracle 13 59 0 95M 66M sleep 13:16 0.07% oraagent.bin
10256 oracle 1 59 0 32G 835M sleep 0:00 0.03% oracle
1227 oracle 15 59 0 78M 56M sleep 4:27 0.02% ocssd.bin
9524 vector1 112 59 0 1704M 776M sleep 45:04 0.02% java
988 oracle 38 59 0 119M 92M sleep 3:00 0.02% ohasd.bin
1297 oracle 1 101 -20 453M 390M sleep 2:47 0.02% oracle
1765 oracle 1 101 -20 32G 329M sleep 2:45 0.02% oracle
10258 oracle 1 59 0 32G 345M sleep 0:00 0.02% oracle
10259 oracle 1 59 0 3400K 2024K cpu/20 0:00 0.01% top
1777 oracle 1 59 0 32G 342M sleep 1:14 0.01% oracle
1246 oracle 6 59 0 56M 44M sleep 1:22 0.01% diskmon.bin
1803 oracle 1 59 0 32G 514M sleep 0:30 0.01% oracle
1215 oracle 15 59 0 71M 46M sleep 1:12 0.00% cssdagent
1307 oracle 1 59 0 453M 390M sleep 0:45 0.00% oracle
1217 oracle 11 59 0 81M 49M sleep 0:35 0.00% orarootagent.bi
Vmstat output:
$vmstat 5 5
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr s3 s3 s3 s3 in sy cs us sy id
0 0 0 53698448 73900568 20 81 32 6 5 0 1 -0 0 1 -0 2235 1447 1984 1 0 99
0 0 0 51196160 72037552 1 13 0 0 0 0 0 0 0 0 0 2505 1403 2204 0 0 100
0 0 0 51193488 72035864 55 380 0 0 0 0 0 0 0 0 0 2487 2143 2203 0 1 99
0 0 0 51183856 72030176 0 0 0 3 3 0 0 0 0 0 0 2496 1370 2182 0 0 99
0 0 0 51182648 72029112 22 117 0 0 0 0 0 0 0 0 0 2503 1408 2193 1 0 99
$cat /etc/release
Solaris 10 10/09 s10s_u8wos_08a SPARC
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 September 2009
I refered the metalink document id: [ID 761960.1]
Database Instance Using Swap Space When There is Plenty of Free RAM metalink note [ID 761960.1]
and tried the disabling the sga_max_size and memory_max_target and memory target with all different combination but no use.
We have one more box where same setup was configured in solaris platform but there the above memory parameters are not disabled but it is not using swap space it takes memry only from physical RAM
Can any one throw some lights on this issue. It wopuld be great if I come to know where the exact problem
Thanks in advance
With Regards,
Boobathi P

Hi,
I didn't say I am not using 11gr2 memory parameters I am using all the automatic memory parameters but the thinks is as per the metalink note I tried by disabling the automatic memory parameters. but that didn't help me in preventing unnecessary swap usage. So I reverted. now it is using automatic memory parameters.
so What is the solution for this?
With Regards,
Boo

How can I get my iPod to play noise when it says my headphones are in but they arnt and I can't get it to play music with out my headphones in ?

How can I get my sound to play my iPod says my headphones are in all the time and they arnt so it will only play sound when my headphones are in

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem..
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

NetStream.Play.StreamNotFound when connecting to my AMS

When I try and connect to the video on my AMS using Flash and AS3 I keep getting NetStream.PLay.StreamNotFound
The exact same video streams on the AMS home page.
I can stream from http://www.helpexamples.com/flash/video/cuepoints.flv but nothing from own server in flash.
Here is my code with the IP Address removed
import flash.media.Video;
var video:Video = new Video();
this.addChild(video);
var mNetConnection:NetConnection=new NetConnection();
mNetConnection.connect(null);
var mNetStream:NetStream=new NetStream(mNetConnection);
video.attachNetStream(mNetStream);
mNetStream.play("rtmp://000.000.000.000/vod/mp4:sample1_1500kbps.f4v");
mNetStream.client=this;
mNetStream.addEventListener(NetStatusEvent.NET_STATUS, onNetStreamStatusEvent);
mNetStream.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
function onNetStreamStatusEvent(event:NetStatusEvent):void
     if (event.info.code == "NetStream.Play.Start")
          trace("NetStream.Play.Start");
     if (event.info.code == "NetStream.Play.StreamNotFound")
          trace("Video Not Found");
     if (event.info.code == "NetStream.Buffer.Full")
function onMetaData(metadata:Object):void
function securityErrorHandler(event:SecurityErrorEvent):void {
     trace("securityErrorHandler: " + event);

Ok founbd a way to adjust the code to work with a f4v file over rtmp.
However I am still not able to stream from an f4m. Can someone help?
import flash.media.Video;
var nc:NetConnection = null;
var video:Video = null;
var mNetStream:NetStream = null;
video = new Video();
this.addChild(video);
nc=new NetConnection();
nc.addEventListener(NetStatusEvent.NET_STATUS, onNetStatus);
nc.connect("rtmp://000.000.000.000/vod");
nc.client = this;
function onNetStatus(event:NetStatusEvent):void
     //Trace the value of event.info.code
     trace( event.info.code );
     /*Check for a successful NetConnection, and if successful
     call publishCamera(), displayPublishingVideo(), and displayPlaybackVideo()*/
     if( event.info.code == "NetConnection.Connect.Success" )
          mNetStream=new NetStream(nc);
          video.attachNetStream(mNetStream);
          mNetStream.play("mp4:sample1_1500kbps.f4v");
          mNetStream.client=this;
          mNetStream.addEventListener(NetStatusEvent.NET_STATUS, onNetStreamStatusEvent);
          mNetStream.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
function onNetStreamStatusEvent(event:NetStatusEvent):void
     if (event.info.code == "NetStream.Play.Start")
          trace("NetStream.Play.Start");
     if (event.info.code == "NetStream.Play.StreamNotFound")
          trace("Video Not Found");
     if (event.info.code == "NetStream.Buffer.Full")
function onMetaData(metadata:Object):void
function securityErrorHandler(event:SecurityErrorEvent):void {
     trace("securityErrorHandler: " + event);

How do I get iTunes to keep playing (radio) when I am not using the compute

How do I get iTunes to keep playing - radio or CD - when the computer is otherwise idle? It cuts off after about 5 minutes and goes into sleep mode. thanks,
Vlasta

Hey vlasta4444,
It sounds like you'll want to change the time it takes for the computer to goto sleep from System Preferences> Energy Saver.
http://docs.info.apple.com/article.html?path=Mac/10.5/en/10330.html
Jason

How do I get my iTunes to playing music when laptop is closed?

How do I get my iTunes in my mac book pro to playing music when laptop is closed?

Mac notebooks: How to use your computer in closed clamshell
InsomniaX

How to get the location of a pageitem when there are pageitems with same UID?

There are two text frames with same UID but on different pages( also defferent spreads ). What I want to know is how I can get the location of them both.
The following code can only get the location of the first frame because the second frame has the same UIDRef with the first one(because they are in one document with same UID) .
    InterfacePtr<IGeometry> splineGeo(ItemRef, IID_IGEOMETRY);
    PMMatrix itemPMMatrix = ::InnerToPasteboardMatrix( splineGeo );
    PMRect itemPMRect = itemGeo->GetStrokeBoundingBox( itemPMMatrix );
Is there any way I can get the second frame location?
Thanks a lot.

No.
Just copy the pageitems from master page to document page.

Tired of getting plugin disables every few days when there's an update

Not a question... A comment.
I, for one, am getting tired of having plugins that I use A LOT and depend on, suddenly disabled every few days when Firefox updates itself. Maybe YOU think that's "progress"...When I keep adding substitute add-ons to replace ones that suddenly don't work, and then a few days later those get disabled too, it makes me wonder if Firefox is a good long-term browser choice. If I were a plugin developer I would be ticked-off beyond belief, and after awhile I'd probably stop developing for Firefox.
Congratulations on a path that will surely make you obsolete sooner rather than later.

The list of plugins (which is rather long) was submitted with the crash report.
My attitude is based on the reality of the frustration of the plugins I use the most being continually disabled by the never-ending parade of upgrades. It is what it is.

Getting lots of "NetStream.Play.InsufficientBW" when there's plenty of Bandwidth

Similar Messages

Maybe you are looking for