Getting "ORA-12703" error in forms 10.1.2.3.0 and database 11.1.0.6.0
Hello All,
I am using forms 10g (10.1.2.3.0) version with database 11g (11.1.0.6.0).
I did some modification in a package. That package is getting called in the forms. After doing modification (just add one if condition) in the package procedure (Not added parameter) I connected to the application and calling the form. I am getting the error message "ORA-12703". After that if I am just compile all the forms, one form is working fine. But in some other form it is not working properly. Still I am getting the error message "ORA-12703". I just put some debug message in the package and form, I compiled both form and package. At this time both are working fine. But if I am putting some debug message in the package only then it is not working. Getting the same error message.
Does it a forms or database issue or I need to do some thing? Any suggestion welcome.
Thanks
SUN
ORA-12703 this character set conversion is not supported
Cause: An attempt was made to use the CONVERT function to convert between two character sets, and the requested conversion is not possible due to unavailability of one or both character sets.
Action: Use character sets available on the system in the CONVERT function.
What character set do you have on the database and what charset on the client side? Maybe SQL*Net issues the convert function when you use different charsets for both?
Similar Messages
-
Getting ORA-01429 error while changing character set
When I am changing character set from WE8DEC to AL32UTF8, I am getting ORA-01429 error
SQL> ALTER DATABASE CHARACTER SET INTERNAL_USE AL32UTF8 ;
ALTER DATABASE CHARACTER SET INTERNAL_USE AL32UTF8
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01429: Index-Organized Table: no data segment to store overflow row-piecesChockalingam wrote:
I am using above steps as per oracle doc only.
http://docs.oracle.com/cd/B10500_01/server.920/a96529/ch10.htm
No, you are not.
- You are not using the correct version doc vs. Oracle server version. Try to find the same suggestion in the relevant doc.
- The doc you reference specifically says "... it can be used only under special circumstances. The ALTER DATABASE CHARACTER SET statement does not perform any data conversion, so it can be used +if and only if the new character set is a strict superset of the current character set+." (emphasis is mine)
You do not have a strict superset.
- Also the special clauses you have used are not documented - for a reason.
Please edit your posts above to remove the ill-advice (steps with internal use only clauses) that does not belong on a forum.
Edited by: orafad on Mar 16, 2012 9:47 PM -
Suddenly getting ORA-12514 error Oracle 11gr2
I installed Oracle 11g r2 fine, had 2 databases (se3 and mydb, both have db_domain .orcl i.e. mydb.orcl and se3.orcl) running on it fine till yesterday. but suddenly im getting ORA-12514 error (TNS:listener doesn't know of service requested in connect descriptor)..
My tnsnames.ora file:
# tnsnames.ora Network Configuration File: G:\oracledb\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
LISTENER_MYDB =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
MYDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = mydb.orcl)
SE3 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = se3.orcl)
LISTENER_SE3 =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
and my listener.ora file is as follows:
# listener.ora Network Configuration File: G:\oracledb\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = G:\oracledb\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:G:\oracledb\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ADR_BASE_LISTENER = G:\oracledb
* i have both of databases up and running(confirmed through administration assistant), the listener is up.. im able to execute "tnsping mydb/se3".. i'm not able to connect to either one of them through sqlplus/sql developer.. The result of "lsnrctl service" is as follows:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
PLEASE HELP ME FRIENDS!! I HAVE A PROJECT DUE IN EARLY OCTOBERHi,
Instead of this:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = G:\oracledb\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:G:\oracledb\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
have the following in your listener file
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = G:\oracledb\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:G:\oracledb\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(SID_NAME = mydb)
(ORACLE_HOME = G:\oracledb\product\11.2.0\dbhome_1)
(SID_DESC =
(SID_NAME = se3)
(ORACLE_HOME = G:\oracledb\product\11.2.0\dbhome_1)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
Also, dont have 'localhost' in your listener.ora file, provide the actual IP or hostanme. NEVER YOU should have
localhost.
Restart listener and try.
Thanks &
Best Regard, -
I have difficulty sending photos through iPhoto 11 often get a connection error. When I go to my email and copy the photos in email the emails go out right away and never seem to have a connection problem? Why did they cahnge the process for sending photos form iphoto?
It is an addition option some people like and other do not (I do not) -- to use it as always is trivial - in the iPhoto preferences set Apple Mail as the e-mail client
LN -
Question - Trying to use Icloud on a PC - I get a server error after I put in my e-mail and password. Why? I can sync up all my devices from Itunes with my MaC, Iphone and IPad but I can't do it with my PC
I regret that you're having trouble setting up your email, corbad! You're on the right track with your incoming email address. You might also try incoming.verizon.net or incoming.yahoo.verizon.net as possible alternatives, and 995 as the port number. Please let me know how that goes!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport -
I can't get artwork, I get a -609 error. I have tried turning off firewall and antivirus. Theewindows firewall is set to allow itunes anyhow. Any suggestions?
Perhaps try the "Error -609" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp but with no sucess. Any suggestions?
Hi Berriedale,
Please try the below steps and check.
Turn off any antivirus or software security program.
Download the update patch 11.0.10 manually from the below link and run it.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5859
Regards,
Anand -
Tried to download TV series from ITunes. Most ok, but 4 will not download. All I get is: download error. Tap to retry. Repeats over and over. Please help!
If you sync with iTunes on your computer - connect the iPad to your computer and launch iTunes. Click on the iPad name on the left side. Then at the top of iTunes go to Store>Check for available downloads. See if the TV shows will download there and then sync them to the iPad.
If you don't sync with iTunes, try signing out of your account, restart the iPad, sign in again and then try to download the shows again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to download again. -
Hi,
I am getting a "Internal error occurred" message when I try to drag and drop common library items on to my canvas.
I have noticed that there are a number of these error messages and tried one solution of renaming a couple of files, I tried this and no joy.
Has any one go a solution for this before I purchase Fireworks please?
Kind regards,
Dave GI can no longer get Firework CS6 to run - The program loads but without any toolbars/properties etc. It just has an 'AN INTERNAL ERROR OCCURRED' message that cannot be dismissed. The only way to close the program is via Task Manager (this is on a Window 8 PC). I have uninstalled the program, rebooted the PC and re-installed (several times) but it has not resolved the problem.
Fireworks is part of my Creative Cloud subscription and when reporting this via the live chat I was given the telephone number for Seagate Drives ??
Anybody got a solution?
Or, does anybody know how to open native Fireworks CS6 png files in Photoshop *but* with all the Fireworks layers preserved.
Think I'll also post this as a new topic as the problem is slightly different to SirBasher's issue. -
Hi,
i have created a new procedure to import a file on the machine to the database BLOB object. the procedure ran succesfully in the SQL prompt. In the Oracle forms builder, I created a new button and on the WHEN_BUTTON_PRESSED PL/SQL logic, i pasted the same procedure. But I got ORA-00439 error while running the form and clicked on the button. Could anyone of you help me out? Is that something to do with any restrictions on Forms?
Below is the code that i used in the PL/SQL logic of WHEN_BUTTON_PRESSED event.
declare
src_file BFILE; -- source file
dst_file BLOB; -- designation file
lgh_file BINARY_INTEGER; -- file length
pdname VARCHAR2(255) := '/appl/pce/d1/eai/informatica/Temp/';
pfname VARCHAR2(255) := 'router.cfg';
file_readonly CONSTANT BINARY_INTEGER := 0;
BEGIN
src_file := bfilename('RNDVPVOUS', pfname);
-- insert a NULL record to lock
INSERT INTO temp1
(name, file_1)
VALUES
(pdname, EMPTY_BLOB())
RETURNING file_1 INTO dst_file;
-- lock record
SELECT file_1
INTO dst_file
FROM temp1
WHERE name = pdname
FOR UPDATE;
-- Open the file
dbms_lob.fileopen(src_file, file_readonly);
-- Determine length
lgh_file := dbms_lob.getlength(src_file);
-- read the file
dbms_lob.loadfromfile(dst_file, src_file, lgh_file);
-- Update the blob field
UPDATE temp1
SET file_1 = dst_file
WHERE name = pdname;
commit;
-- Close file
dbms_lob.fileclose(src_file);
END load_file;
I'm also sending the version details of Forms Builder below.
Forms [32 Bit] Version 6.0.8.18.3 (Production)
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.6.0 - Production
Oracle Toolkit Version 6.0.8.18.0 (Production)
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.17.0 Build #863 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 6.0.7.1.0 - Production
Oracle Virtual Graphics System Version 6.0.5.38.0 (Production)
Oracle Tools GUI Utilities Version 6.0.5.32.0 (Production)
Oracle Multimedia Version 6.0.8.18.1 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.1
Oracle CORE Version 4.0.6.0.0 - Production
Please help me out in this regard as I have an urgent release this weekend.
Cheers
SarmaThank you very much. This problem is now solved as I have used FORMS_DDL to execute the procedure from database and not from Forms. But could anyone of you tell me if we can have a link in Forms for BLOB object, where if there is a word document in the database BLOB object, by clicking on that link, that document should open in word. Similarly if there is an image file in the BLOB object, then clicking on that link in Forms should open it some Image processing software which that OS has. Is this really possible? Please let me know. If we update the contents of the document opened, they should get reflected in the database BLOB object. Is this really a HERCULIAN task?
-
Oracle 8i, Getting ORA-1501 error while creating new DB
Hi folks,
I am trying create a new database on an HP Machine (Details given below) but getting following error.
ORA-1501 - signalled during Create Database
LOGFILE 'G:\logfiles\logaf1.ora'
We actually have a custom application setup.exe to create new database.
Same setup when installed on a different low end machine works fine.
Before begining the setup in summary page it shows following information.
Block buffer count = -3 Bytes
Shared Pool Size = -41425 KBytes
Yes the values displayed are in negative.
Don't know if this is the reason for the ORA-1501 error.
Can anyone please suggest how to resolve this issue.
Machine configuration is as follows:
H/W details:
HP Server with RAID configuration
4, PIII CPU's
RAM: "4 GB"
S/W details
O.S:Windows 2000 Server with Service Pack-2
Oracle Version: 8i
Patch applied: Oracle8i Patch Set Version 8.1.7.3.0Try look to alert<SID>.log file for full error report (you could paste it here).
Also from alert log you could get real values for db_block_buffers and shared_pool_size parameters that used during instance startup. -
Oracle 10g installing on Oracle EL, getting ORA-12157 error?
My boss is getting really impatient. I have tried installing Oracle 10g on... Oracle EL, CentOS 4, Fedora 4, Fedora 5, and I get the same error on them alll...
ORA-12157: TNS: internal network communication error
This occurs during the end phase of the installation, when it says "Clone database creation". Network seems to be working, can ping the server, static IP, all that?
Any help appreciated, I've been working on this for 5 days.
JonVerbatim, this error means:
ORA-12157: TNS:internal network communication error
Cause: Internal error during network communication.
Action: Not normally visible to the user. For further details, turn on tracing and reexecute the operation. If error persists, contact Worldwide Customer Support.Have you met all requirements before proceeding with installation? Do you have all required patches? Is there any warnng during the prerrequisites verifying routine? Is there any outstanding issue recorded on your install log file?
I suggest you, after verifying above points, to go ahead wiht a software only installation, next, using the network and databse assistants perform a network configuration and a database creation, this way you'll be able to isolate the source of the problem and go ahead with a specific troubleshootig. -
Materialized view fast refresh ...getting ORA-22992: error
Hi All,
Oracle version 11.1.0.7
While creating a materialized view(Fast refresh) on remote tables ... i am getting the ORA-22992: cannot use LOB locators selected from remote tables ... error.
but the actual scenario is... i am not selecting any of the BLOB/LOB columns from the remote tables. I did n't include them in my materialized query.
I am able to refresh it complete but couldn't refresh it fast. Here i want to mention other thing... when ever i have records in Mat view log(Base table has a blob cloumns in it)
i am getting the above error. when no record in the Mat view log(i.e on BLOB base table) .. i can able to refresh it as FAST.
MV_CAPABILITIES table tells that ...My Mat view is able to refresh it FAST.I don't know howw to approach to solve this issue.could some one tell me the approach..to solve it?
Here is the sample code ....this is what i have done so fat
session 1 (REMOTE_ONE)
I have created synonyms for the remote tables on current schema. That's why i didn't include @DBLINK.
create table RT_A ( col1_A varchar2(20), col2_A BLOB,COL3_A NUMBER);
create a table RT_B (COl1_B varchar2(20), col2_B BLOB, COL3_B NUMBER);
create a table RT_C (COL1_C varchar2(20), col2_C VARCHAR2,COL3_C NUMBER);
create MATERIALIZED VIEW LOG ON RT_A
WITH ROWID EXCLUDING NEW VALUES;
create MATERIALIZED VIEW LOG ON RT_B
WITH ROWID EXCLUDING NEW VALUES;
create MATERIALIZED VIEW LOG ON RT_C
WITH ROWID EXCLUDING NEW VALUES;
grant select on RT_A to CUURRENT_ONE with grant option;
grant select on RT_B to CUURRENT_ONE with grant option;
grant select on RT_C to CUURRENT_ONE with grant option;
grant select on MLOG$_RT_A to CUURRENT_ONE with grant option;
grant select on MLOG$_RT_B to CUURRENT_ONE with grant option;
grant select on MLOG$_RT_C to CUURRENT_ONE with grant option;Session 2 (CUURRENT_ONE)
create materialized view ABC_MV
BUILD IMMEDIATE REFRESH FORCE ON DEMAND START WITH SYSDATE NEXT SYSDATE+1
AS
select A.ROWID AS A_ROWID,
B.ROWID as B_ROWID,
C.ROWID AS C_ROWID,
A.COL1_A,
B.col1_B,
c.col1_c
from RT_A, RT_B,RT_C
where COL3_A = COL3_B(+)
and COL3_B = COL3_C(+)Appreciate your help.
Thanks,
MikeThanks for the reply
In that he/she is selecting the LOB column from the remote database(master site).
I am just referencing the table which has BLOB column in it.I am not referencing any LOB column in my select(Mat view) query...
is there anything i need to check..?
Regards,
Mike -
Need help trouble shooting Database Gateway for MS SQL Server setup, getting ORA-28546 error
Dear All,
I am trying to setup Oracle Database Gateway for MS SQL Server(I don't have admin access to the MS SQL Server). When I try to test the dblink connection, I get the following error.
I issued select * from dual@xyz;
ORA-28546: connection initialization failed, probable Net8 admin error
ORA-28511: lost RPC connection to heterogeneous remote agent using SID=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=dg4msql)))
ORA-02063: preceding 2 lines from xyz
28546. 0000 - "connection initialization failed, probable Net8 admin error"
My setup is the following.
1. Oracle 11gR2 running on Oracle Linux 6, the same version gateway is installed on the same server, but different home directory.
2. Oracle DB home directory is /u01/app/oracle/product/11.2.0/dbhome_1, gateway home directory is /u01/gateway.
3. I use the same listener.ora file for both the db and the gateway.
4. the contents of my listener.ora, tnsnames.ora and the initdg4msql.ora are below.
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
#(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
(ADDRESS = (PROTOCOL = TCP)(HOST = db.abc.com.tw)(PORT = 1522))
mssql =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME=db.abc.com.tw)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME=orcl)
SID_LIST_mssql =
(SID_LIST =
(SID_DESC =
(SID_NAME=dg4msql)
(ENVS=LD_LIBRARY_PATH=/u01/gateway/dg4msql/driver/lib:/u01/gateway/lib)
(PROGRAM_NAME=/u01/gateway/bin/dg4msql)
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP)(HOST = db.abc.com.tw)(PORT = 1522))
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = db.abc.com.tw)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.abc.com.tw)
dg4msql =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP) (HOST=localhost)(PORT = 1521))
(CONNECT_DATA=(SID=dg4msql))
(HS=OK)
/u01/gateway/dg4msql/admin/initdg4msql.ora
HS_FDS_CONNECT_INFO=[192.168.0.1]:1433//XIETEST
# alternate connect format is hostname/serverinstance/databasename
HS_FDS_TRACE_LEVEL=255
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
dblink was created using statement below.
CREATE DATABASE LINK "xyz.abc.COM.TW"
CONNECT TO SA IDENTIFIED BY
USING 'dg4msql';
Couple more things, that I have done to check the work above.
[oracle@db admin]$ ping 192.168.0.1
PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.
64 bytes from 192.168.0.1: icmp_seq=1 ttl=61 time=7.61 ms
64 bytes from 192.168.0.1: icmp_seq=2 ttl=61 time=7.41 ms
^C
--- 192.168.0.1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1818ms
rtt min/avg/max/mdev = 7.417/7.516/7.615/0.099 ms
[oracle@db admin]$ tnsping dg4msql
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 11-SEP-2013 10:53:11
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP) (HOST=localhost)(PORT = 1521)) (CONNECT_DATA=(SID=dg4msql)) (HS=OK))
OK (0 msec)
[oracle@db admin]$ lsnrctl status mssql
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 11-SEP-2013 10:54:23
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
Alias mssql
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 11-SEP-2013 10:09:46
Uptime 0 days 0 hr. 44 min. 37 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/db/mssql/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "dg4msql" has 1 instance(s).
Instance "dg4msql", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Obviously, I would like to get this setup to work, but I also have couple other questions regarding this setup.
1. When installing the gateway, it asks to run the root.sh script. the root.sh script as for the following.
Enter the full pathname of the local bin directory: [/usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: n
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: n
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: n
is the above answer correct?
Thanks for reading.Dear Klaus,
I did start a new SQL*PLUS session
The output of /u01/gateway/bin/dg4msql is
[oracle@db log]$ /u01/gateway/bin/dg4msql
Oracle Corporation --- WEDNESDAY SEP 11 2013 14:45:06.604
Heterogeneous Agent Release 11.2.0.1.0 - 64bit Production Built with
Oracle Database Gateway for MSSQL
The output of env is
HOSTNAME=db.abc.com.tw
SHELL=/bin/bash
TERM=xterm
HISTSIZE=1000
ORACLE_UNQNAME=orcl
TMPDIR=/tmp
QTDIR=/usr/lib64/qt-3.3
QTINC=/usr/lib64/qt-3.3/include
USER=oracle
LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/dbhome_1/lib:/lib:/usr/lib
LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=01;05;37;41:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.tbz=01;31:*.tbz2=01;31:*.bz=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=01;36:*.au=01;36:*.flac=01;36:*.mid=01;36:*.midi=01;36:*.mka=01;36:*.mp3=01;36:*.mpc=01;36:*.ogg=01;36:*.ra=01;36:*.wav=01;36:*.axa=01;36:*.oga=01;36:*.spx=01;36:*.xspf=01;36:
ORACLE_SID=orcl
ORACLE_BASE=/u01/app/oracle
ORACLE_HOSTNAME=db.abc.com.tw
MAIL=/var/spool/mail/oracle
PATH=/u01/app/oracle/product/11.2.0/dbhome_1/bin:/usr/sbin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/oracle/bin
PWD=/home/oracle
LANG=en_US.UTF-8
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
HISTCONTROL=ignoredups
SHLVL=1
HOME=/home/oracle
TMP=/tmp
LOGNAME=oracle
QTLIB=/usr/lib64/qt-3.3/lib
CVS_RSH=ssh
CLASSPATH=/u01/app/oracle/product/11.2.0/dbhome_1/jlib:/u01/app/oracle/product/11.2.0/dbhome_1/rdbms/jlib
LESSOPEN=|/usr/bin/lesspipe.sh %s
ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
G_BROKEN_FILENAMES=1
_=/bin/env -
Getting ORA-22920 Error With 'FOR UPDATE' clause
Hello all,
I scanned through all the messages regarding this error and the suggestion posted was to have 'FOR UPDATE' in the SELECT query. I do have that, but I am still getting ORA-22920 (row containing the LOB value is not locked) error.
I am using JDBC thin driver with 8.0.5. I know the thin driver installation works because I can read data that I inserted using 'INSERT INTO ...' from svrmgr30.
Can anyone show me some light on this?
Thanks
SureshHi,
This helped me:
Before the insert statement:
connection.setAutoCommit(false);
..what you like to do
at the end..
connection.commit()
HTH
Martin
Maybe you are looking for
-
Firefox wont open and i can't uninstall it from the control panel
firefox wont open and i can't uninstall it from control panel.When i try to open it i get a message saying "windows cannot access you may not have appropiate permission to access" Have tried to download firefox hoping would clear the old one also tri
-
Also, I see that Acrobat X Pro does not install all plugins. There are several that I want shown as not installed. But how can I get these installed, as there is no button to say "install this"??
-
What are the correct steps for installing Oracle Entitlement Server SSM?
Can somebody explain what are the correct steps to install OES SSM 10.1.4.3? I have installed OES admin 10.1.4.3 and applied the CP2 patch. it is allowing me to open Entitlement Administration, where I can define the policy. Is it sufficient to have
-
I would like to know how I can get a radio application for my blackberry.
-
Noob: failed attempt to update inner join
I'm attempting to update fields in joined tables bh and bhp, based on information contained in both. The updated fields are not the fields the tables are joined on. I'd expect that to fail but I can't figure out why what I'm trying to do fails. I've