Getting problem during deploying desktop application with JNLP File.

Hi,
I am developing one standalone (desktop) application in swing. I want to make one jnlp file that would be install on my computer as a client(suppose). When i am doing jav web start enabled after that making application descriptor. But when i am running a web browser where i have stored my html file. but it is giving me an error that codebase or something like this. Please tell me is there any other way to do this task. Please help me to do this. Is NetBeans ide is best way to do this. please help me.
Thanks in advance.
Manveer.

>
...but it is giving me an error that codebase or something like this. ...>Try changing the JNLP file to 'something like that', that might work.
In case it does not, I provide a tool called JaNeLA that will provide a lot more specific error message(s) than 'something like this'.
Really, I cannot see you getting better help than on some of your other recent threads, with vague, unspecific error messages, and without putting the JNLP file and other relevant information.

Similar Messages

Problem deploying an application with more task flow

Hi all,
I am using Jdeveloper 11.1.1.0 and weblogic 10.3.1
I am trying to deploy an application that has more task flows.
I am in the home page and I click on a button and I go to a new task flow.
If I run the application from Jdeveloper it works, but if I deploy the application and try to do it I have this error on the page .jspx:
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
and this error on the server log:
servlet failed with Exception oracle.adf.controller.security.AuthorizationException:ADFC-0619: Can't check authorization at:
'/myFolder/calledTaskFlow.xml#myViewActivityoracle.adf.controller.internal.security.AuthorizationEnforcer.handleFailure<AuthorizationEnforcer.java:147>
oracle.adf.controller.internal.security.AuthorizationEnforcer.checkPermission
oracle.adf.controller.internal.security.AuthorizationEnforcer.checkRead
oracle.adf.controller.internal.security.AuthorizationEnforcer.getTaskFlowDefinition
oracle.adfinternal.controller.activity.TaskFlowCallActivityLogic.findTaskFlowDefinition
What's the problem?
Thanks
Edited by: user10799119 on 2-set-2009 6.27

I have not understood well what you mean: "Its better you create an EAR profile, have proper ADF Security set up in Jdev with users and roles, and also proper roles and permissions assigned to taskflows, and then deploy the profile directly from JDev."
I have proper ADF Security set up in Jdev with users and roles, and also proper roles and permissions assigned to taskflows, and then deploy the profile directly from JDev. After that I have deployed my application to EAR file. I am using the EAR file create by default by Jdeveloper. Is this correct? Or have I to create another profile?
"If you still wanna deploy the EAR, check the Users and Roles section under security in the Weblogic console. Users and Roles need to be configured in Weblogic as well. In 11g they get deployed automatically but with any previous version of Jdev you might have to check this in the WLS console."
In the weblogic console, clicking on Security realms --> myRealm --> providers, I have defined myAuthenticator
I am using Jdeveloper 11.1.1.0 and web logic server 10.3.1, so it seems to me that users and roles get deployed automatically
what have I to do?
thanks

Problem while deploying ADF application in glassfish

Hello I am using JDeveloper 11.1.2.3.0
I have configured Glassfish in my computer and I have followed the instructions as Shay explained here: https://blogs.oracle.com/shay/entry/deploying_oracle_adf_applications_to
The problem is that when I try to deploy my ADF application as "Deploy to application server" with glassfish in this case I get an error saying that:
[#|2013-08-21T11:45:47.516+0200|SEVERE|glassfish3.1.2|org.apache.catalina.core.ContainerBase|_ThreadID=62;_ThreadName=Thread-2;|ContainerBase.addChild: start:
org.apache.catalina.LifecycleException: java.lang.IllegalArgumentException: java.lang.ClassNotFoundException: oracle.adf.share.glassfish.listener.ADFGlassFishAppLifeCycleListener
If I deploy the ADF aplication as an EAR file and then I try to deploy this EAR file to glassfish through the admin interface I get this other error:
[#|2013-08-21T15:40:16.452+0200|SEVERE|glassfish3.1.2|javax.enterprise.system.tools.deployment.org.glassfish.deployment.common|_ThreadID=65;_ThreadName=Thread-2;|Exception while invoking class com.sun.enterprise.web.WebApplication start method
java.lang.Exception: java.lang.IllegalStateException: ContainerBase.addChild: start: org.apache.catalina.LifecycleException: java.lang.RuntimeException: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! javax.el.ELContext
Can anyone help on this?
Thanks

I removed the jar files from /lib/ext and putted el-api.jar by myself in /lib directory. Now I can deploy my application as EAR file without problems but when I try to deploy it directly through JDeveloper the problem is the same:
[#|2013-08-22T09:43:22.507+0200|SEVERE|glassfish3.1.2|org.apache.catalina.core.ContainerBase|_ThreadID=98;_ThreadName=Thread-2;|ContainerBase.addChild: start:
org.apache.catalina.LifecycleException: java.lang.IllegalArgumentException: java.lang.ClassNotFoundException:oracle.adf.share.glassfish.listener.ADFGlassFishAppLifeCycleListener
I do understand that I should have this JAR but I do not know where to find it and where to put then.
Can you help in this point? Thanks

Problem while deploying ear application in OAS

Hello,
I am trying to undeploy application or redeploy, its is giving exception below exception
ADMN-300071
No ApplicationInfo is associated with application named: example1
oracle.ias.sysmgmt.deployment.j2ee.exception.J2eeDeploymentException: No ApplicationInfo is associated with application named: example1 ,
Again i have tried to deploy application freshly, it is telling already application is exists, i am not getting what we can do, even i have checked list of applications , the above application is present in list ,
i am also getting admn-300075
i am not able to deploy, redeploy or undeploy , i am not able to do anything.
Thanks,
Chaitanya

I removed the jar files from /lib/ext and putted el-api.jar by myself in /lib directory. Now I can deploy my application as EAR file without problems but when I try to deploy it directly through JDeveloper the problem is the same:
[#|2013-08-22T09:43:22.507+0200|SEVERE|glassfish3.1.2|org.apache.catalina.core.ContainerBase|_ThreadID=98;_ThreadName=Thread-2;|ContainerBase.addChild: start:
org.apache.catalina.LifecycleException: java.lang.IllegalArgumentException: java.lang.ClassNotFoundException:oracle.adf.share.glassfish.listener.ADFGlassFishAppLifeCycleListener
I do understand that I should have this JAR but I do not know where to find it and where to put then.
Can you help in this point? Thanks

Deploying APEX application with web host

Hi guys,
Whats the process of deploying APEX application with a webHost?
We got a good deal from a web host with dedicated database, it still being processed.
Currently we have a domain name hosted elsewhere (non APEX host) . What I am planning to do is, create a subdomain with our existing web host and point it to the IP address of the DB machine the apex host will give us.
So I am guessing the process will involve:
1) getting the IP address of the database machine
2) configure the my existing web hosting setup to create a sub-domain and make it point to the IP address (for example 174.184.223.441)
Would I need Port number of the machine running Oracle DB with APEX and the local IP address (the one starts with 10.0.0.xxx) etc?
Would be grateful if someone can share what you did given you already have a domain hosted and need to create a subdomain to make it point to another APEX host.

Hi Jim,
Try to replace,
<jnlp spec="1.0+" codebase="http://localhost:8080/fileviewer" href="index.jnlp">
with
<jnlp spec="1.0+" codebase="$$codebase" href="index.jnlp">
But i was using JNlpdownload servlet to do the task
Regards
Leo

Problem while deploying ADF application to standalone WLS server

Hi,
I am facing a problem while deploying ADF application to standalone WLS Server.
Following is the error message that I am getting.
[07:24:03 PM] ---- Deployment started. ----
[07:24:03 PM] Target platform is (Weblogic 10.3).
[07:24:07 PM] Retrieving existing application information
[07:24:08 PM] Running dependency analysis...
[07:24:08 PM] Building...
[07:24:13 PM] Deploying 2 profiles...
[07:24:14 PM] Wrote Web Application Module to D:\WorkSpace3\DashboardUi\deploy\Dashboard.war
[07:24:14 PM] Wrote Enterprise Application Module to D:\WorkSpace3\deploy\Dashboard.ear
[07:24:14 PM] Deploying Application...
[07:24:22 PM] [Deployer:149191]Operation 'deploy' on application 'Dashboard' is initializing on 'msDevServer1'
[07:24:27 PM] [Deployer:149193]Operation 'deploy' on application 'Dashboard' has failed on 'msDevServer1'
[07:24:27 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application Dashboard on msDevServer1.: .
[07:24:27 PM] Weblogic Server Exception: weblogic.application.ModuleException:
[07:24:27 PM] Caused by: weblogic.common.ResourceException: DataSource DashboardDb already exists
[07:24:27 PM] See server logs or server console for more details.
[07:24:27 PM] weblogic.application.ModuleException:
[07:24:27 PM] #### Deployment incomplete. ####
[07:24:27 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)Any suggestion how to fix this.
Thanks
Ajay

I logged into console and browsed to 'Home >Summary of JDBC Data Sources' but not able to locate DashboardDb. Please let me know where to find DashboardDB on wls console.
Also, please let me know how to configure the app to not to auto-deploy JDBC data sources

Problem during deployment of axis (stock) examples

Hi all
I am getting problem during the deployment of stock example given in the apache site.
Even i am not getting the right response from the URL
http://localhost:8080/axis/services/Version?method=getVersion
and
http://localhost:8080/axis/EchoHeaders.jws?method=list.
I am using tomcat 4.1 and JDK1.4.
I have set all the jar files in the axisclasspath.
At the deployment i am using the commond
C:\tomcat4\webapps\axis\WEB-INF\classes>java -cp %AXISCLASSPATH% org.apache.axis.client.AdminClient -lhttp://localhost:8080/axis/services/AdminService samples\stock\deploy.wsdd
and getting fault as
Processing file samples\stock\deploy.wsdd
Exception: AxisFault
faultCode: {http://xml.apache.org/axis/}Server.NoService
faultSubcode:
faultString: The AXIS engine could not find a target service to invoke! targetService is null
faultActor:
faultNode:
faultDetail:
{http://xml.apache.org/axis/}hostname:Divyakant-verma
If anybody has solution please let me know
Thanks in advance
Divyakant Verma

I too am having the same issue and I am using the Java2WSDL and the WSDL2Java to create both the WSDL and the WSDD and I still get Server.NoService when I try to use the AdminClient to deploy the wsdd?
I have tried using both 1.2 and 1.2.1.
I am going to try to use an older verison to see if this is a bug..
If any one know the answer to this deployment problem please speak up.

How to Deploy J2ME applications with data in RMS?

Hello everyone,
I am designing a J2ME application, a simple "Who wants to be a millionaire game". It stores questions and answers from a rms datastore. I want to to how can I deploy this application with questions and answers in the recordstore. Each time I run the emulator, the data stored previously gets deleted. Is it possible to attach the rms recordstore along with the .jar or .jad files? If so how can I do it. Please help.
Thank you all in advance.

Thank you Sypress.. When I install it the code works fine. But I wanted to include data with the application. I think I found a way way. I added the data in a text file and while starting the application I inserted data from the file into the recordstore.

Problem while deploying WD application thru SDM

Hi friends ,facing problem while deploying webdynpro application on SDM.It takes much time deployment but for the past 1 or 2 day its not working properly ..i..e error is coming while deploying WD application................................................"Cannot login to the SAP J2EE Engine using user and password as provided in the Filesystem Secure Store. Enter valid login information in the Filesystem Secure Store using the SAP J2EE Engine Config Tool. For more information, see SAP note 701654.."
If how know how to resolve this then waiting for ur response..
Thanx in advance
Hanif

Hi Hanif,
The SDM password should be reset if it is not the same as mentioned in your Filesystem Secure Store or vice versa.
If you have changed your administrator password, kindly do change the same in secure store as well via the config tool.
Use the Config Tool to change the entry in secure storage as follows:
1. Start the Config Tool.
           (Go to <drive>:\usr\sap\<SID>\<instance>\j2ee\configtool --> configtool.bat.)
2. Select the secure store node.
           The configuration for the secure storage in the file system appears.
3. Select the admin/password/<SID> entry.
4. Enter the administrator user's new password in the "Value" field and choose "Add".
5. Choose "File" --> "Apply" to save the data.
          Note: Contrary to the message that appears, you do not need to restart the server or cluster for this change to take effect.
6. Finally restart SDM server.
Regards,
Anagha

Software Center Application Uninstallation Button Greyed Out and Deploying an Application with Uninstall switch Fails

Hi,
I tried everything I could find on the internet but no luck so far. I can successfully deploy MS Visio 2013 to the clients. I also want to be able to uninstall it from the clients. On the client machine Uninstall button is greyed out. This deployment is
installed as "Available" and there is only one deployment type within that MS Visio 2013 Application.
I tried the following uninstall commands in my deployment:
setup.exe /uninstall
setup.exe /uninstall
VisPro
/config .\vispro.ww\uninstallvisio.xml
“\\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\setup.exe” /uninstall VisPro /config "\\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\vispro.ww\uninstallvisio.xml"
\\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\setup.exe /uninstall VisPro /config \\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\vispro.ww\uninstallvisio.xml
I checked Product ID from Setup.xml and I know it is correct. My uninstallvisio.xml' content is below:
<Configuration Product="VisPro">
<Display Level="basic" CompletionNotice="yes" SuppressModal="yes" AcceptEula="yes" />
<Setting Id="SETUP_REBOOT" Value="Never" />
</Configuration>
Last night, I downloaded and installed Cumulative Update 1 for SCCM 2012 R2 and I haven't tried the deployment after the update,yet. I will try it today but please let me know what else to check.
Yavuz Selim Atmaca

After I updated SCCM Server and test client pc with CU1 , I tried to deploy visio as Required. It installed successfully. Then I uninstalled visio by deploying the application with Uninstall Action.
After that I tried to deploy visio as "Available" to see if Software Center Uninstall button works. However visio deployment does not come to Software Center's Available Applications List. I check the status of the deployment under the Deployments monitoring
node and it says Success "Already Compliant". I dont know what it means. Does config manager thinks that visio already installed?
Yavuz Selim Atmaca
2 or 3 hours later that -Succes "Already Compliant"- status of the deployment under the Deployments monitoring node is vanished automatically and Software Center application list showed the new deployment. I installed it and uninstalled it succesfully.
So, you are right Solution is the CU1 but I am still wondering why my available deployment took so time to be visible in Software Center althought I didn't enter any schedule to be available.
Yavuz Selim Atmaca

The error when I deploy ess application with SDM

SOS!!!when I deploy ess application with SDM(ESS05P_1-10002965.sca), It failed.please help me.
The trace file:
#1.5#00145ED221BE00F7000000B90011A07C0004421B32EEBBA8#1198584492898#com.sap.engine.services.webdynpro.WebDynproContainer##com.sap.engine.services.webdynpro.WebDynproContainer#J2EE_ADMIN#15220####0f7fa990b2e211dca62200145ed221be#SAPEngine_Application_Thread[impl:3]_173##0#0#Error#1#/System/UserInterface#Java###Failed to deploy application '''' for deployment state listener ''''.
[EXCEPTION]
#3#sap.com/essauaddr#com.sap.tc.webdynpro.serverimpl.wdc.repository.RepositoryContainerHook#com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to deploy the file '/usr/sap/EP1/DVEBMGS02/j2ee/cluster/server0/./temp/webdynpro/public/sap.com/essauaddr/webdynpro/Applications/com.sap.xss.hr.per.au.address.Per_Address_AU/Per_Address_AU.xml' into the database. Reason: Development Object 'sap.com/ess~au' contains already same repository content. Hint: fully qualified name of the repository VMO must be globally unique.
     at com.sap.tc.webdynpro.repository.deploy.RepositoryUpdateManager.checkVMOsExistInOtherDC(RepositoryUpdateManager.java:504)
     at com.sap.tc.webdynpro.repository.deploy.RepositoryUpdateManager.deployRepositoryContent(RepositoryUpdateManager.java:98)
     at com.sap.tc.webdynpro.serverimpl.wdc.repository.RepositoryContainerHook.onDeploy(RepositoryContainerHook.java:232)
     at com.sap.engine.services.webdynpro.WebDynproContainer.deploy(WebDynproContainer.java:1007)
     at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
     at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
     at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:552)
     at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:215)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
#1.5#00145ED221BE00F7000000BB0011A07C0004421B32EF7CEE#1198584492948#com.sap.engine.services.deploy##com.sap.engine.services.deploy#J2EE_ADMIN#15220####0f7fa990b2e211dca62200145ed221be#SAPEngine_Application_Thread[impl:3]_173##0#0#Error#1#/System/Server#Java#deploy_5029##Exception in operation deploy with application sap.com/essauaddr.#2#deploy#sap.com/essauaddr#
#1.5#00145ED221BE00F7000000BC0011A07C0004421B32EF7F24#1198584492949#com.sap.engine.services.deploy##com.sap.engine.services.deploy#J2EE_ADMIN#15220####0f7fa990b2e211dca62200145ed221be#SAPEngine_Application_Thread[impl:3]_173##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception in operation deploy with application sap.com/essauaddr.
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.rollbackPart(ApplicationTransaction.java:394)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:294)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:552)
     at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:215)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Cannot deploy application sap.com/essauaddr.
     at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:330)
     at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
     ... 13 more
Caused by: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application sap.com/essauaddr. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
     at com.sap.engine.services.webdynpro.WebDynproContainer.deploy(WebDynproContainer.java:1016)
     at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
     at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
     ... 15 more

Check these below links
https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4611860
https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4562067
https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4258751
https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4474525
https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4543091
https://forums.sdn.sap.com/click.jspa?searchID=7622331&messageID=4368694
reward points if helpful

How to deploy cairngorm application with FTP support?

Hi,
I have a cairngorm application, it works fine in my local
computer.
But I need to upload it to a website in my web hosting
company with FTP,
but it doesn't work in the hosting server because I can not
add the cairngorm.swc file to the application.
Please give me a idea how to deploy the application with ftp
software.
Thanks a lot
Mark

Any opinions are welcome

I keep getting "Problem during delivery processing" messages

This morning I started getting "Problem during delivery processing" messages like this one...

Same problem here. And i can't fine apple support contact for submit this problem. Bad bad bad bad support page appe .

Problem with .jnlp files

I have an iMac running 10.6.8. I'm having a problem with .jnlp files. I've downloaded two, cgoban.jnlp and gopanda.jnlp. When I double-click the file, nothing happens. If I Control-click and select Open With Java Web Start, same. Nothing happens. Software Update says my Java is up to date. Any ideas?

A few other similar threads were solved by this — I'd like to give credit where credit's due but I can't find the original posting.
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources/XProtect.meta.p list
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>

        <key>LastModification</key>
        <string>Thu, 31 Jan 2013 04:41:14 GMT</string>
        <key>PlugInBlacklist</key>
        <dict>
                <key>10</key>
                <dict>
                        <key>com.macromedia.Flash Player.plugin</key>
                        <dict>
                                <key>MinimumPlugInBundleVersion</key>
                                <string>11.3.300.271</string>
                        </dict>

                </dict>
        </dict>
        <key>Version</key>
        <integer>2028</integer>
</dict>
</plist>

Deploying application with class files compiled using ojspc

Hi,
I want to deploy the application having class files compiled using ojspc in Oracle9iAS Release 2 rather than having JSP pages.
Thanks,
Pritam

Hi Manoj,
I have tried doing something like this.
If you want to try this out running on a NW2004s.You need to first download the entire project from perforce branch (
tc\webdynpro\clientserver)for NWDS 7.0 and then build the project locally in your java perspective.
During the local build of the project.It will also point out the dependent projects required by this project(clientserevr).
Once the project is build.
Create seperate external jars of the clientserver project and its dependent projects and save them locally.
Open your SDM manager,pick up this jar file from there and deploy it.
Once the deployment is over, the server is ready to run the application you created.
But this make your NWDS2004s to behave jus like NWDS7.0 .
Just a small suggestion ,instead of going through this tedious process you can shift to NWDS7.0 itself.
regards
aarthi mathivanan

Getting problem during deploying desktop application with JNLP File.

Similar Messages

Maybe you are looking for