Getting RPC_S_SERVER_UNAVAILAIBLE WHILE DOING WEBENROLLMENT

Hi All,
I am getting the below error while doing web enrollment . Can any suggest suggest some pointers to fix it.
Puneet Singh

Thanks for the reply Brian but i have few more question with respect to your answer
Assuming that the Web server (/CertSrv) site is on a separate server, ensure that [Puneet] Yes your assumption is correct:
1) You can run certutil -config CADNSName\CALogicalName -ping successfully
(tests if you can make an RPC connection from the certsrv server to the CA 
2) Verify that you have delegation correctly setup (DNS name used to connect to the app server is registered as a SPN for the account used by the DefaultAppPool [Puneet] these are the steps i followed for setting the delegation  do you feel i missed something
To configure delegation 
1. Open Active Directory Users and Computers.
2. Locate EACH of the Web Enrollment/NDES servers and do the following:
3. In the details pane, double-click the account, and then click the Delegation tab.
4. Click Trust this user for delegation to specified services only.
5. Select the Use any authentication protocol check box.
6. Click Add, and then click Users or Computers.
7. Find/enter the name of the CA specific to that Web Enrollment/NDES server, and then click OK.
8. In the Available Services list, click HOST and rpcss, and then click OK. Hold down the CTRL key to select multiple items.
9. Click OK to save the changes.
3) You have configured delegation correctly on that account's Delegation tab to use either Kerberos or any authentication protocol to the CA computer accounts HOST and RPCSS services [Puneet] Is this needs to be
done on certificate authority box ?
Puneet Singh

Similar Messages

  • I am getting error while doing MFBF for semifinisg good

    Hi,
    i am getting error while doing MFBF for semifinisg good
    Existing standard cost estimate cannot be used
    Message no. RM175
    Diagnosis
    This error appears under the following circumstances:
    The existing standard cost estimate cannot be used for backflushing activities as the repetitive manufacturing profile was not maintained correctly when the standard cost estimate was carried out.
    The standard cost estimate must come from product costing. Other cost estimates (such as base object controlling) are not possible.
    Procedure
    The repetitive manufacturing profile assigned to the material at the time of the planned cost estimate must be a profile for repetitive manufacturing with product cost collector.
    Use product costing to create the standard cost estimate.

    I had already check REM profile repetitive mfg profile final backflush w. activities.
    this particular material is semifinish material attached in BOM of finish material.
    backflush of finish good is possible but now new requirement is to do production booking for the semifinish material.
    i had assign production version , done routing and maintain REM profile,
    created material cost with quantity structure ck11n then run the costing in ck40n.
    still getting the error what else is to done to able to book this thru MFBF.

  • Getting Error while doing Control Panel - Windows Update Error code is 80070103

    Getting Error while doing Control Panel -> Windows Update Error code is 80070103. The optional Windows 7 update is
    Microsoft - Other hardware - WinUsb Device
    Please provide your email ID to send the Error screen shot.

    Hi!
    Check the following link to see if it solves your problem:
    http://support.microsoft.com/kb/952032
    Best regards
    Andreas Molin
    Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin

  • Getting Error while doing Subcontract PO-MIGO

    Dear All,
    While doing subcontract gr i am getting error
    Deficit of Stock w. vendor unr. 2.336 KG : FR-BAJRA-4903-1.5 1002 O
    my PO quantity is 5,200 EA
    for the PO i have send to vendor with component material qty is 121.486 KG
    Ratio is 1 KG=22 EA
    Now vendor sending for 1 KG is 25 EA ...when i am taking GR for rest 100 EA system thronging error
    Please suggest me how take GR with tolerance...

    Hi,
    Your PO qty is 5200 EA . For this to happen the component to be 1 KG for 22 EA of the sub con main material . Is this correct ?
    If so 236 .36 KG - 5200 EA means , 5200 EA needed to be created by vendor , it requires 236.36 KG of the component ,
    Did you in fact sent the component for the 236.36 KG to vendor ? to get the 5200 EA ?
    But as per you post for the PO qty 5200 EA youi sent 121.486 KG . then 1 EA = 2.336 KG .Please check the previous GR document for the component how much it is consumed . It has to be 119.149 approx . If in that document the consumption is more , defintly system will ask for more qty and give deficit .
    Please check the components sent to the vendor and the consumption . probably this flow is missed for the deicit .
    Regards,

  • Equipment master ie03 partner getting deleted while doing material return

    Hi
    We are facing some problem in serial no
    1.We are creating equipment master in IE08 and assigning same equipment no as serial no in ie02
    Update partner functions in IE02
    2.Then we are creating a repair type sales order
    3.Do goods receipt using VRRE by assinging serial no
    4.While doing goods receipts(653 movement type) in transaction VRRE,the parter function gets deleted in equipment master IE03 for that serial number
    5.But at the same time when iam doing post goods issue for the same material after repair and same serial no using vl02n,601 movement type,Partner gets updated.
    Is this the normal SAP behaviour.While doing goods return from customer will the partner function get deleted in equipment master and while doing vl02n,goods issue 601 will it update again
    Regards
    Swetha

    Dear all
    Can you please reply
    Regards
    Swetha

  • Getting error while doing make to order scenario

    Hello Sap Gurus,
    While doing make to order scenario(strategy 20),when i am giving customer requirement through md81(using reqmt type KE),i am getting the following error,"Receiver category is not allowed by settlement profile SD1."
    Could you guys help me in solving this error.In settlement profile SD1  i have checked that valid receivers material,sales order are kept as optional,then also getting error.

    Hi Jitendra
    Can u confirm what setting is kept against reciever "sales order"? Is it kept as settlement required or optional? Ideally it should be "required"
    Also provide the error message number which u are getting
    Rgds

  • Getting error while doing stream setup through OEM

    hi all,
    I am getting following error while doing stream setup for user stradmin (ORCL) db to stradmin_dest (orcldestination) on same windows m/c.
    java.sql.SQLException: ORA-20204: User does not exist: STRADMIN ORA-06512: at "SYSMAN.MGMT_USER", line 122 ORA-06512: at "SYSMAN.MGMT_JOBS", line 139 ORA-06512: at "SYSMAN.MGMT_JOBS", line 78 ORA-06512: at line 1
    I provided everything (host credential, usernames for new users and table capture)
    its urgent
    Help in advance

    hi,
    thanks for reply but DB user exists. It seems to be problem of WIN environment with Streams. I could solve it. But after whole setup and starting Apply and capture capture process goes for hours, not replicated at destination database. Normally how fast is replcation when done for small db like scott on table emp.
    thanks

  • Getting error while doing pgi

    i am getting an error while doing pgi, the error is 'runtime error - description of exception'
    how could i overcome this problem
    pls help me to solve this problem

    Hi,
    Consult your abaper he can give you a solution.
    Thank you,

  • Getting error while doing Intercompany asset transfer

    This is the first time that they are doing an intercompany asset transfer in our client. Intracompany asset transfers were done in the past. While doing an intercompany transfer, an error is popping up as given below.:
    Account 'Contra account: Acquisition value' could not be found for area 01
    Message no: Au133
    Diagnosis
    When creating the accounting document the system could not find account 'Contra account: Acquisition value' in depreciation area 01 for Company code( sending company code)
    Procedure:
    Enteer this account in the account determination for Asset Accounting.
    Since, this is the first time an intercompany transfer is happening I assume that there is some configuration or some settign that might have to be done. Please could you help me.

    Hi,
    first set your COD with OAPL.
    Go to transaction AO90 and select your COA and click on account determination, and select the account determination key, which is used for your sending asset and doublie click on blanace sheet accounts.
    There one field will be there called Contra account: Acquisition value, so enter a B/S GL account there and SAVE it.
    Since this account is required to enter at both COD level, like sending assets COD and receiving assets COD. But if you have your both assets in same COD, no need to maintain twice.
    The purpose of this GL account is used while transfering one asset from one company code to another to capture the NBV as clearing entry between inter company code trasnfers. (This is as good as OBYA settings in FI). But this GL account here is not specific for one particular company code as like in FI.
    This will solve your problem.
    Cheers,
    Srinu

  • Getting error while doing AIBU

    Hi All,
    Getting error while running AIBU that critical number reached 99801,for group asset IN65PLANT.
    Please do the needful for the issue.

    Whant is the error number and the long text

  • Getting Error while doing Reverse Engineering Processes.

    Hi all,
    I am new to ODI, i tried ODI with SAP ABAP, after i my all settings after doing reverse Engineer Processes, I cant able to see the Metadata browser while checking Log i am getting the below given error.
    ODI-1217: Session Sap ERP Source (27001) fails with return code 7000.
    ODI-1226: Step Sap ERP Source fails after 1 attempt(s).
    ODI-1229: An error occurred while performing a Reverse operation on model code SAP_ERP_SOURCE.
    Caused By: org.apache.bsf.BSFException: BeanShell script error: Sourced file: inline evaluation of: ``//////////////////////////////////////////////////////////////////////////////// . . . '' : Class: DestinationDataProvider not found in namespace : at Line: 275 : in file: inline evaluation of: ``//////////////////////////////////////////////////////////////////////////////// . . . '' : DestinationDataProvider
    BSF info: Create Java Classes at line: 0 column: columnNo
    Pl. help me to come out from this error.
    bdharanr

    Hi,
    Thanks for the reply.
    I am trying to reverse SAP tables. Initially the Reversal process stuck at Set MetaData step. I stopped the session and restarted it then Set MetaData completed successfully but Set FlexFields give the error.
    Any idea?
    Regards,
    Arsalan.

  • Getting Error while doing MIGO

    Hello Gurus,
    I am facing one problem recently. While I m doing MIGO_GR against PO, I am getting the error for Account Determination Key and Document Splitting. I have gone through all the configuration for Document splitting & Account Determination and found all correct.
    I created PO on 01.03.2008 for 10000 Qty and i was doing MIGO_GR partially. When i m trying to do MIGO_GR for the rest of qty. I m getting the error for Account Determination key and Document splitting.
    It very urgent and right now i m searching for work around solution.
    Can anybody help me pls in this regards??
    Its very urgent!!!!
    Regards,
    Jigar

    Hi,
    Message No. is GLT2152.
    Account Determination 01001/missing
    Procedure :
    either check the splitting rule or create the account determination key.
    I checked all these scenarios.
    I m using 6.0 version
    I am purchasing the material and i have already activated document splitting. earlier i was not getting any error though document splitting was activated.
    What should i do?
    Thanx in advance
    Regards,
    Jigar

  • Getting error while doing sales planning in COPA

    Hello Friends,
    While i m doing the sales planning in COPA via KEPM, I am getting the dump for ABAP Feilds regarding Volume and Weight.
    Error has been stated below.
    Runtime Errors CONVT_OVERFLOW
    Except. CX_SY_CONVERSION_OVERFLOW
    Date and Time 19.03.2008 16:16:40
    Short dump has not been completely stored (too big)
    Short Text
    Overflow when converting from "1.12036e+12"
    What Happned?
    Error in the ABAP Application Program
    The current ABAP program "SAPLKEAB" had to be terminated because it has come across a statement that unfortunately cannot be executed.
    Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not caught in
    procedure "GET_WEIGHT_AND_VOLUME" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated.
    The reason for the exception is:
    When attempting to convert the value "1.12036e+12", an overflow occurred.
    As i m getting the ABAP Error while making the sales planning for Finished Product

    My guess - because I don't know your system - is the system is looking for one particular type of value, but is being fed a different one. While trying to convert, the value foes into data overflow.
    Check:
    1. If the planning is in Alternative Units of measure and this alternative is well defined in the material master.
    2. If a standard conversion routine has been assigned to any of the values and the conversion routine is not consistent with the data type / data element.
    3. Check your upload file / data. Is there a column defined there that should contain data of a specific type (decimals, or number formats, etc.) but is not the case.
    4. If all else fails, you need an ABAPer to decode the error for you.
    Cheers.

  • Business Area field should not get translate while doing allocations in co

    Dear All,
    In ecc 6.0 when we will be allocating expenses through assessment and Distribution the system credits sender cost center and debits receiver cost center,the same will be applicable for Business Area also.
    But my client is having plant =business area for which they are making financial statements business area wise.
    The client wants its business area not to get affected by above allocations ,Is there any method of restricting costs to remain in same business area and not getting translated to another business area.
    Example :                    cost center           profit center           business area
    expenses                      1011                   1001                     101
    allocation from cctr to cctr 1012 which is having pctr 1002 and business area 102
    expenses                      1012                   1002                       102
    So my requirement is the system should not update business area 102
    Thanks and regards
    vijay

    Hi Vijay,
    Profit Center is derived basing on Assignments. If you have assigned a Profit Center in the Cost Center Master
    Data, obviously for whatever the postings that take place in that Cost Center, will be posted to Profit Center also
    (Statistical).
    In your case, Cost Center 1011 and 1012 have been assigned to different Profit Centers 1001 and 1002. So,
    conceptually what the system is doing is correct.
    You want to restrict the postings to happen to Business Areas. I suggest you, this is not problem of
    stopping/restricting the transaction postings but You have to restructre your Cost Centers and Profit Centers.
    It's rather a Business Process / Structure change required than technical requirement in the system by restricting
    the postings.
    Pls revert back for further discussion...
    Srikanth Munnaluri

  • Getting Error while doing month end provisions using FS00

    Hi Guru,
    please suggest.
    while making month end provisions for salraies by using t code FS00 geeting error that Account XXXXX does not exist in company code level
    please help me on reslove this.
    Rgds..Suresh

    Hello Suresh,
    The GL Account does not exist for that Company code. Hence extend the GL Account to the Company Code by using Copy with template in FS00.
    Regards
    Kalpana

Maybe you are looking for