Getting run time error when executing stanard SAP transaction
Hi experts,
I am trying to run the standard SAP report transaction S_ALR_87013557. but it is giving the run time error "LOAD_PROGRAM_NOT_FOUND". i also check the program name that appears in the short dump with SE38. it gives the message that no program exist.
but when i try to run other S_ALR_ trasactions, they are running correctly.
So can just help me in this regards.
Check if this program GPA8PD2X83M8PML7SBUU3COEFIK exist in your system.
if yes then see which transaction it is attached.
if that transaction is executing properly, then functional person can tell if that's the report they are looking for.
if no u can execute this prog from se38 & check. if that works, then you can create z transaction & attach that program.
This will be workaround, ideally you should raise OSS ticket. SAP may release new Note .
Similar Messages
-
Getting run time errors while executing the copied SAP programs
Hi folks,
i want to copy an sap program.after coping i need to change some coding there.then i have to create a new transaction for that.
i am just copying the sap program RQEEAL10(transaction-QA32) to Z_RQEEAL10. it has 4 include programs.i am copying them to z programs like
RQ00MF10 copied to z_RQ00MF10
RQALVF14 copied to z_RQALVF14
RQALVF16 copied to z_RQALVF16
RQALVTOP copied to z_RQALVTOP.
now i am executing that program Z_RQEEAL10.but i am getting run time errors as given below.
<b>runtime error---</b>
The termination occurred in the ABAP program "Z_RQEEAL10" in
"SELECT_FIELDS_MANIP2_F16".
The main program was "Z_RQEEAL10 ".
The termination occurred in line 257 of the source code of the (Include)
program "RQALVF16"
of the source code of program "RQALVF16" (when calling the editor 2570).
--Error in ABAP statement when processing an internal table.
--When changing or deleting one or more lines of the internal table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS" or when inserting in the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS", 0 was used as
the line index. An index less than or equal to zero is not
allowed.
The error can occur when using the following options:
1. "INDEX idx" for specifying the line number in the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS"
where you want to change, insert or delete.
2. "FROM idx" for specifying the start index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS".
3. "TO idx" for specifying the end index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS".
When the program terminated, the table had 2 lines.
these r the runtime errors what i am getting.where is the problem?i have activated all interface & includes.plz advice.
Thanks & regardsHi Madhu,
I will give you one more check point where you have to give your concentration while copying the standard programs....
Call Customer-Function (Function Exists) if any in the Program when copied will not get executed. Instead you need to call the FM Directly.
one more is also here
You are likely to have some problems with the text-elements and translation that may have been maintained for the original report.
~~Guduri -
MSS PORTAL - RUN TIME ERROR WHEN EXECUTING A WORK ITEM IN UWL
Hi all,
I've a requirement wherein I need to have a custom screen in place of 'standard user decision' task in the UWL of MSS portal. I've developed a custom screen with Approve and Reject buttons and it works fine if I execute the work item from SAP inbox whereas in portal (UWL), it gives a run time error stating,
Portal Runtime Error
An exception occurred while processing your request
Exception id: 10:56_12/05/08_0020_509163550.
I'm sure that this error is due to missing configuration between the dynpro and the Portal. All inputs in this regard will be of great help and will be valuable to me.
Thanks in advance,
Bharathi.Hi
Looking at the error message I feel like there is something wrong in the task object and object method. You are using a class in the task make sure that class has the IF_WORKFLOW. Mak sure the task is enabled with synchronous task method check box.
Regards
Pavan -
Getting Run time error when trying to open WAD
I get the following message when opening WAD either from Business Explorer or from the start menu of the window.
run time error '438'.
Object does not support this property or method.
Any Insights? I was able to do this earlier.
Thanks
Amit.Stefan,
What is your front end patch level ? to find out , open the Logon pad ad right click on the icon on the status bar and select about , you will know the patch level for the same , that might give you some idea , what you have to possibly do is implement a front end patch.
Arun -
Run time error when executing J2IU
On execution of the report its showing the following dump.
Runtime Errors PERFORM_CONFLICT_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Date and Time 28.05.2011 13:26:24
Short text
Structure-type conflict when calling a FORM
What happened?
Error in the ABAP Application Program
The current ABAP program "J_1IRUTZ" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
The call of the FORM "DETERMINE_DEFAULT_VALUES" is incorrect:
The actual parameter no. 2 is at PERFORM not compatible with the
structure type requested by FORM "DETERMINE_DEFAULT_VALUES".
The FORM "DETERMINE_DEFAULT_VALUES" is defined in program "SAPMJ1II".
This error occurs in Unicode if the fragment view of the types is
incompatible.
Missing Handling of System Exception
Program J_1IRUTZ
Trigger Location of Exception
Program J_1IRUTZ
Include J_1IUPBO
Row 97
Module type (MODULE PBO)
Module Name FILL_PAYABLE_AMOUNT
Source Code Extract
Line SourceCde
67 ENDIF.
68 ENDMODULE. " FILL_ACCOUNT_BALANCES OUTPUT
69 &----
70 *& Module FILL_PAYABLE_AMOUNT OUTPUT
71 &----
72 * text *
73 -
74 MODULE fill_payable_amount OUTPUT.
75 IF flg_first_time = 'X' .
76 *get the total value of amount payable
77 LOOP AT it_exchdr.
78 totals-bed = totals-bed + it_exchdr-exbed.
79 totals-aed = totals-aed + it_exchdr-exaed.
80 totals-sed = totals-sed + it_exchdr-exsed.
81 totals-cess = totals-cess + it_exchdr-cess.
82 totals-ecs = totals-ecs + it_exchdr-ecs.
83
84 *NCCD changes starts
85 totals-nccd = totals-nccd + it_exchdr-nccd.
86 *NCCD changes ends
86 *NCCD changes ends
87 ENDLOOP.
88 *determine default values based on customization
89
90 PERFORM determine_default_values(sapmj1ii)
91 USING p_exgrp
92 totals "#EC NO_INCOMP
93 max_bal
94 CHANGING rg23a
95 rg23c
96 st_pla.
>>>>> ent_tot-bed = rg23a-bed + rg23c-bed + st_pla-bed.
98 ent_tot-sed = rg23a-sed + rg23c-sed + st_pla-sed.
99 ent_tot-aed = rg23a-aed + rg23c-aed + st_pla-aed.
100 ent_tot-ecs = rg23a-ecs + rg23c-ecs + st_pla-ecs.
101
102 *NCCD changes starts
103 ent_tot-nccd = rg23a-nccd + rg23c-nccd + st_pla-nccd.
104 *NCCD changes ends
105 ent_tot-cess = st_pla-cess.
106
107 flg_first_time = space.
108 ENDIF.
109 *
110 PERFORM check_min_balances.
111 ENDMODULE. " FILL_PAYABLE_AMOUNT OUTPUT
112 &----
113 *& Module STATUS_9010 OUTPUT
114 &----
115 * text *
116 -
Please help me out.....
Regards.
Durga Naresh
Edited by: NareshBD on May 30, 2011 7:28 AMCheck if this program GPA8PD2X83M8PML7SBUU3COEFIK exist in your system.
if yes then see which transaction it is attached.
if that transaction is executing properly, then functional person can tell if that's the report they are looking for.
if no u can execute this prog from se38 & check. if that works, then you can create z transaction & attach that program.
This will be workaround, ideally you should raise OSS ticket. SAP may release new Note . -
Category ABAP Programming Error
Runtime Errors CONVT_NO_NUMBER
Except. CX_SY_CONVERSION_NO_NUMBER
ABAP Program ZMM_MIGO_GOODS_ISSUE
Application Component Not assigned
Date and Time 26.05.2014 14:28:30
Short Text
"C:\Users\SAP\Desktop\MIGO\MIGO.xlsx" cannot be interpreted as a number
What happened?
Error in the ABAP Application Program
The current ABAP program "ZMM_MIGO_GOODS_ISSUE" had to be terminated because
it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception has occurred which is explained in more detail below. The
exception is assigned to class 'CX_SY_CONVERSION_NO_NUMBER' and was not caught
in procedure
"%_SEL_SCREEN_P_FNAME_V" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated thisHI CHIRUI,
I have changed and tried but still i a getting the same thing..
otherwise please check this i am using some class method i am not getting short dump,but excel file is not getting uploaded.
REPORT ZMM_MIGO_GOODS_ISSUE NO STANDARD PAGE HEADING.
DATA : BEGIN OF IT_DATA OCCURS 0,
ID(10),
BLDAT(10), " Document Date
BUDAT(10), " Posting Date
REF_DOC_NO(16), " Material Slip No
DEL_NOTE(16), " delivery note
MATNR TYPE MSEG-MATNR, " Material Number
ERFMG(13) TYPE C, " Quantity
BWART TYPE RM07M-BWARTWA, " Movement Type
SOBKZ(1), " Special Stock
WERKS TYPE RM07M-WERKS, " Plant
LGORT TYPE RM07M-LGORT, " Storage Location
PS_POSID TYPE PS_POSID, " WBS Element
COST_CENTER TYPE KOSTL, " cost center
ORDER TYPE AUFNR, " order number
SERNR TYPE RIPW0-SERNR, " Serial Number
END OF IT_DATA,
BEGIN OF IT_HEAD OCCURS 0,
ID(10),
BLDAT(10), " Document Date
BUDAT(10), " Posting Date
REF_DOC_NO(16), " Reference document number
"HEADER_TXT(25), " Header Text
BWART TYPE RM07M-BWARTWA, " Movement Type
END OF IT_HEAD,
BEGIN OF IT_ITEM OCCURS 0,
ID(10),
"ID1(10),
WERKS TYPE RM07M-WERKS, " Plant
LGORT TYPE RM07M-LGORT, " Storage Location
VAL_TYPE TYPE BWTAR_D,
MATNR TYPE MSEG-MATNR, " Material Number
ERFMG(13) TYPE C, " Quantity
CHARG TYPE MSEG-CHARG, " Batch
BWTAR TYPE BWTAR_D,
PS_POSID TYPE PS_POSID, " WBS Element
ERFME TYPE MSEG-ERFME, " Unit
COST_CENTER TYPE KOSTL, " cost center
ORDER TYPE AUFNR, " order number
CUSTOMER TYPE EKUNN, " Account Number of Customer
SERNR TYPE RIPW0-SERNR, " Serial Number
AMOUNT_LC TYPE BAPI_EXBWR,
SOBKZ(1),
END OF IT_ITEM,
HEADER LIKE BAPI2017_GM_HEAD_01,
CODE LIKE BAPI2017_GM_CODE,
ITEMS LIKE BAPI2017_GM_ITEM_CREATE OCCURS 0 WITH HEADER LINE,
SERIAL LIKE BAPI2017_GM_SERIALNUMBER OCCURS 0 WITH HEADER LINE,
RETURN LIKE BAPI2017_GM_HEAD_RET,
RET LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE,
TESTRUN LIKE BAPI2017_GM_GEN-TESTRUN,
IT_TAB TYPE FILETABLE,
GD_SUBRC TYPE I,
L_FILE TYPE RLGRAP-FILENAME,
IT_RAW TYPE TRUXS_T_TEXT_DATA,
COUNT(2) TYPE N,
TEXT_C(30).
DATA: DATA LIKE TABLE OF IT_ITEM WITH HEADER LINE.
DATA: IT_TEMP LIKE TABLE OF IT_ITEM WITH HEADER LINE.
DATA: IT_TEMP1 LIKE TABLE OF IT_ITEM WITH HEADER LINE.
DATA: IT_ITEM1 LIKE TABLE OF IT_ITEM WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_FILE TYPE RLGRAP-FILENAME.
* p_test AS CHECKBOX.
SELECTION-SCREEN: END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'SELECT FILE'
CHANGING
FILE_TABLE = IT_TAB
RC = GD_SUBRC.
READ TABLE IT_TAB INTO P_FILE INDEX 1.
START-OF-SELECTION.
PERFORM GET_EXCEL_DATA.
PERFORM GET_HEADER_ITEM.
PERFORM UPDATE_DATA.
*& Form GET_EXCEL_DATA
* text
* --> p1 text
* <-- p2 text
FORM GET_EXCEL_DATA .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = P_FILE
IMPORTING
OUTPUT = L_FILE.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_LINE_HEADER = 'X'
I_TAB_RAW_DATA = IT_RAW
I_FILENAME = L_FILE
TABLES
I_TAB_CONVERTED_DATA = IT_DATA
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GET_EXCEL_DATA
*& Form GET_HEADER_ITEM
* text
* --> p1 text
* <-- p2 text
FORM GET_HEADER_ITEM .
DATA : FLAG(1).
LOOP AT IT_DATA.
CLEAR FLAG.
IF IT_DATA-ID IS NOT INITIAL.
AT NEW ID.
FLAG = 'X'.
ENDAT.
ENDIF.
IF FLAG = 'X'.
MOVE-CORRESPONDING IT_DATA TO IT_HEAD.
APPEND IT_HEAD.
ENDIF.
MOVE-CORRESPONDING IT_DATA TO IT_ITEM.
APPEND IT_ITEM.
ENDLOOP.
DATA[] = IT_ITEM[].
IT_TEMP[] = IT_ITEM[].
IT_TEMP1[] = IT_ITEM[].
ENDFORM. " GET_HEADER_ITEM
*& Form UPDATE_DATA
* text
* --> p1 text
* <-- p2 text
FORM UPDATE_DATA .
DATA : COUNT1(10),
L_QTY TYPE I,
DAT(10).
CONCATENATE SY-DATUM+6(2) '.' SY-DATUM+4(2) '.' SY-DATUM(4) INTO DAT.
LOOP AT IT_HEAD.
ON CHANGE OF IT_HEAD-ID.
CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
EXPORTING
DATE_EXTERNAL = IT_HEAD-BUDAT
ACCEPT_INITIAL_DATE = 'X'
IMPORTING
DATE_INTERNAL = HEADER-PSTNG_DATE.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
EXPORTING
DATE_EXTERNAL = IT_HEAD-BLDAT
ACCEPT_INITIAL_DATE = 'X'
IMPORTING
DATE_INTERNAL = HEADER-DOC_DATE.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MOVE : '2' TO HEADER-VER_GR_GI_SLIP,
'X' TO HEADER-VER_GR_GI_SLIPX.
* IF r1 EQ 'X'.
MOVE '05' TO CODE-GM_CODE.
HEADER-REF_DOC_NO = IT_HEAD-REF_DOC_NO.
"HEADER-HEADER_TXT = IT_HEAD-HEADER_TXT.
* ELSEIF r2 EQ 'X'.
* MOVE '04' TO code-gm_code.
* ELSEIF r3 EQ 'X'.
* MOVE '04' TO code-gm_code.
* ENDIF.
* IF p_test = 'X'.
* MOVE 'X' TO testrun.
* ENDIF.
ENDON.
IT_ITEM1[] = IT_ITEM[].
*delete it_item[] where werks = '' and id = it_head-id.
DELETE ADJACENT DUPLICATES FROM IT_ITEM COMPARING ID MATNR.
LOOP AT IT_ITEM WHERE ID = IT_HEAD-ID.
* ON CHANGE OF it_item-id1.
COUNT1 = COUNT1 + 1.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = IT_ITEM-MATNR
IMPORTING
OUTPUT = ITEMS-MATERIAL.
MOVE : IT_ITEM-WERKS TO ITEMS-PLANT,
IT_ITEM-LGORT TO ITEMS-STGE_LOC,
* it_item-lgort1 TO items-move_stloc,
IT_ITEM-CHARG TO ITEMS-BATCH,
* IT_ITEM-VAL_TYPE TO ITEMS-VAL_TYPE,
'FRESH' TO ITEMS-VAL_TYPE,
IT_HEAD-BWART TO ITEMS-MOVE_TYPE,
IT_ITEM-SOBKZ TO ITEMS-SPEC_STOCK,
IT_ITEM-ERFMG TO ITEMS-ENTRY_QNT,
IT_ITEM-ERFMG TO ITEMS-ENTRY_QNT,
* it_item-erfme TO items-entry_uom,
* it_item-sgtxt TO items-item_text,
* it_item-exbwr TO items-amount_lc,
IT_ITEM-PS_POSID TO ITEMS-WBS_ELEM,
IT_ITEM-PS_POSID TO ITEMS-VAL_WBS_ELEM,
"IT_ITEM-CUSTOMER TO ITEMS-CUSTOMER,
IT_ITEM-ERFMG TO L_QTY,
IT_ITEM-AMOUNT_LC TO ITEMS-AMOUNT_LC,
IT_ITEM-COST_CENTER TO ITEMS-COSTCENTER,
IT_ITEM-ORDER TO ITEMS-ORDERID.
* items-SPEC_MVMT = 'R'.
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
EXPORTING
INPUT = ITEMS-WBS_ELEM
IMPORTING
OUTPUT = ITEMS-WBS_ELEM.
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
EXPORTING
INPUT = ITEMS-VAL_WBS_ELEM
IMPORTING
OUTPUT = ITEMS-VAL_WBS_ELEM.
* CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
* EXPORTING
* input = it_item-lifnr
* IMPORTING
* output = items-vendor.
APPEND ITEMS.
* ENDON.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM IT_TEMP COMPARING ID MATNR.
DELETE IT_TEMP1 WHERE ID <> IT_HEAD-ID.
DELETE IT_TEMP WHERE ID <> IT_HEAD-ID.
DATA: MAT_ITM TYPE MBLPO,
SERNP TYPE SERAIL.
MAT_ITM = '0001'.
LOOP AT IT_TEMP.
SELECT SINGLE SERNP FROM MARC INTO SERNP WHERE MATNR = IT_TEMP-MATNR.
IF SERNP IS NOT INITIAL.
LOOP AT IT_TEMP1 WHERE ID = IT_TEMP-ID AND MATNR = IT_TEMP-MATNR.
* MOVE : it_item1-id TO serial-matdoc_itm,
* MOVE : mat_itm TO serial-matdoc_itm,
SERIAL-MATDOC_ITM = MAT_ITM .
SERIAL-SERIALNO = IT_TEMP1-SERNR.
APPEND SERIAL.
CLEAR IT_ITEM1.
ENDLOOP.
MAT_ITM = MAT_ITM + 1.
ENDIF.
CLEAR IT_TEMP.
ENDLOOP.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
GOODSMVT_HEADER = HEADER
GOODSMVT_CODE = CODE
TESTRUN = TESTRUN
* GOODSMVT_REF_EWM =
IMPORTING
GOODSMVT_HEADRET = RETURN
* MATERIALDOCUMENT =
* MATDOCUMENTYEAR =
TABLES
GOODSMVT_ITEM = ITEMS
GOODSMVT_SERIALNUMBER = SERIAL
RETURN = RET
* GOODSMVT_SERV_PART_DATA =
* EXTENSIONIN =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
* IMPORTING
* RETURN =
IF NOT RETURN IS INITIAL.
WRITE :/ 'Material Document Number Generated: ' ,RETURN-MAT_DOC,RETURN-DOC_YEAR.
ELSE.
LOOP AT RET.
WRITE : RET-TYPE, RET-MESSAGE.
* log-index = sy-index.
* log-matnr = header-material.
* log-message = ret1-message.
* APPEND log.
ENDLOOP.
ENDIF.
REFRESH : ITEMS,RET.
CLEAR : HEADER,RETURN.
CLEAR: TESTRUN ,
RETURN,
ITEMS[],
SERIAL[],
RET[],
HEADER,
IT_TEMP[] ,
IT_TEMP1[].
IT_TEMP[] = DATA[].
IT_TEMP1[] = DATA[].
ENDLOOP.
ENDFORM. " UPDATE_DATA
Regards,
Suresh bheema -
Getting Run-time error when using Client ADI with Office 2010
Hi,
We are unable to import journals from Client ADI when using Office 2010.
Please let me know how to resolve this issue.
Thanks,
PoojaDuplicate post -- Client ADI display A runtime error in Office 2010
-
Run time error when we click "Leave overview " in ESS - pl help
Hi Gurus ,
We are getting run time error when we
click the 'Leave Overview' in
ESS.
when emloyee applies for leave he may
need to wait for aproval during
that time he cannot access the 'leave
overview' screen he will be
facing run time error .
because of this run time error system
performance become very slow .
please help me .i will give points for valid answers .
:-Suneetha reddyHi ,
I am soory for late reply ,
I changed the runtime parameter to 1200 and monitaring the system .
Now there is no Run time error but still Leave overview is taking time .
Please help
Thanks,
Sunitha -
Have Elements 11 and I get a Run Time Error when going into editor?
I have Elements 11 and I am getting a run time error when I select editor. It worked 2 weeks ago and now I get the message. I use Windows 7 and it nothing has changed in the past two weeks that I know of. The error is Microsoft Visual C ++ runtime Library
Windows was installed in 2013, so it is whatever that dumb version was with
no 'off'...
I have Photoshop Elements 10.0
I have no idea what an optimized computer means.
When I say 'either editor' I mean I can't use the Full or Quick editor,
they both produce the same message stream.
As follows:
Box pops up that is Microsoft Visual C ++ Runtime Library with the
message:
Runtime Error
Program : C:\Program files
THis application has requested the Runtime to terminate it is an
unusual way....
PLease contact the application support team for more information
If I click the OK button then I get an Adobe Photoshop Elements 10 box that
pops up which says
"Elements 10 has stopped working"
I have no problem downloading images into the program or renaming files or
pulling images back out I just can't edit.
Hope that helps.
Leslie
On Tue, Mar 31, 2015 at 11:27 AM, A.T. Romano <[email protected]> -
I get aq run time error when trying to load the latest version of iTunes. Help.
I get a run time error when attempting to install the latest version of iTunes & now cannot access iTunes. Can anyone help me?
Hi jalbany,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari -
Run Time Error when trying to get into the organizer
Does anyone know when I keep getting a run time error when I'm trying to go into the organizer and how I get it to go away?
The answer is that maybe someone does know ... but unless you give us the basic details of what you are doing, we probably can't help.
So ...
What version of PSE?
What operating system?
What is the EXACT word-for-word verbatim error you are seeing?
Does any part of PSE (like the "splash" screen) pop up before this error? If so, describe it or give us a screen capture.
Please provide all requested information. -
Iam getting run time error message when i try to open dream weaver cs4
iam getting run time error message when i try to open dream weaver cs4
exact message am getting when i try to open dreamweaver cs4- this application has requested the run time to terminate in it in an unusual way . please contact the applications support team for more information.
-
ABAP Run time Error whle executing the Balance sheet report in FGI0
Hi,
I am getting the below ABAP Run time error while executing the Balance Sheet report in FGI0.It was working before but now it is giving the error.Kindly help me in solving this.
Runtime Errors MESSAGE_TYPE_X
Date and Time 06/12/2009 15:17:17
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
RAISE RKD_CONDITION_READ (internal error)
Long text of error message:
Diagnosis
The program was terminated because a situation occurred which
should not have arisen.
Procedure
Analyze the situation and contact SAP.
Technical information about the message:
Message class....... "KH"
Number.............. 299
Variable 1.......... "RKD_CONDITION_READ"
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Trigger Location of Runtime Error
Program SAPLKYPR
Include LKYPRU31
Row 36
Module type (FUNCTION)
Module Name RKD_CONDITION_READ
Thanks
SupriyaHello,
Please refer SAP
Note 971535 - dump when deleting characteristic with hierarchy
Regards,
Ravi -
Run-time error while executing alv grid report
Hi everyone
I m trying to run a alv grid report it is giving a run time error while executing the statement CALL METHOD V_ALV->SET_TOOLBAR_INTERACTIVE.
Actually i added 2 buttons in the toolbar.after that when i execute the report i m getting errors.
<b>Error Analysis</b>
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "TOOLBAR_MENUS_INIT" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "ME->M_CL_MENU_BUTTON_VARIANT").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.Hi Dinesh,
Seems you have not initialised ( Instantiated in OO ) the object and / or the parent container.
Check if you have create object for both the parent as well as the alv object.
So when you instatntiate the object of ALV you pass the object ( instantiated before hand ) in the parent container position.
Also you would have to register the events to the object using method. Then only the buttons will finction.
eg :
IF G_CUSTOM_CONTAINER IS INITIAL.
CREATE OBJECT CUSTOM_CONTAINER_1
EXPORTING CONTAINER_NAME = CONTAINER_1.
CREATE OBJECT GRID1
EXPORTING I_PARENT = CUSTOM_CONTAINER_1.
CALL METHOD ALV_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING I_STRUCTURE_NAME = 'VBAK
CHANGING IT_OUTTAB = IT_VBAK.
Reward points if useful. -
Run time error when loding the WEB clint
Dear
All
I am in sap ides 4.0 I am trying to login the web Clint thru the BSP application in the se80 t code I got in to that code select the BSP application after that cic_ic and F8.
New internet explore opened and asked for user id password after that. The page is loding after that no action but I refresh the page it is saying that ending the section.
I find that i am getting two types of run time errors when page loding i find this thru st22 list of run time errors.
that are 20.10.2008
1.09:26:15 gopinath SAPUSER 800 C SYNTAX_ERROR CRM_MKTTG_PROC_TG_FEXP_BATCH 1
2.18.10.2008 14:05:55 gopinath 000 C DBIF_RSQL_INVALID_REQUEST SAPMSYST 1
and i check in event viewer also in that it is showing that.
SAP-Basis System: Transaction Canceled 00 671 ( SYNTAX_ERROR 20081020092615gopinath SAPUSER 8001 )
with Regards,
Prakesh.Hi
I would suggest you to create a OSS request using service.sap.com and ask SAP to help on this
Regards
Madhan
Maybe you are looking for
-
"Anybody tried this at home?"...a follow-up!!
Hi all, To anybody who got interested in my crazy idea of using an SD card as an audio HD on the current MBP, i finally got one and tried it. I don't know if my procedure is right, though. I used a current "work in progress" containing 5 soft synths
-
Hi, I have a G5 running tiger (soon to be running leopard hopefully) with a DVI cinema display. I have a PC that I use for testing my work on the Web. I was able to switch back and forth easily with a Belkin KVM switch back when I was using a VGA mon
-
I'm trying to open LR5 from CC for the first time.
I've been runnng LightRoom 4 for the past year. Decided to Check out LightRoom 5. Tired it for 30 days and really liked it. So I decided to upgrade to Creative Cloud and get LR 5 and Photoshop at the same time. The problem is I can;t figure out h
-
Custom fields for ROS initial page in BSP application
Hi, We want to add some more customer fields in ROS initial page, for example TIN number. We have added a field to ZZTIN in the include CI_CUF_REQ_FIELDS of structure ROS_CUF_REQ_FIELDS and also implemented BAdI ROS_REQ_CUF. After adding custom codes
-
Install Process for solaris 10 6/06
After installation, Solaris prompts me for a login and pass What is the default admin pass??