Getting ~ saperated values in to plsql tables or refcursor
Hi<br>
<br>
If have a column with ~ saperated value as <br>
<br>
pen~pencil~rubber <br>
<br>
This string does not have fixed number of ~ in the string column how can i <br>saperate these values and store it in plsql table or ref cursor .
can i get this using sql statement <br>
for ex
i want that in similar fashion in plsql table
<br>
pen <br>
pecil<br>
rubber<br>
<br>
<br>
Can i get what is the number of ~ in the above string using sql statement<br>
<br>
Regards<br>
vamsi krishna
This string does not have fixed number of ~ in the string column how can isaperate these values and store it in plsql
SCOTT@demo102> drop table tild;
Table dropped.
SCOTT@demo102> create table tild (id number, text varchar2(20));
Table created.
SCOTT@demo102>
SCOTT@demo102> insert into tild values (1,'pen~pencil~rubber');
1 row created.
SCOTT@demo102> insert into tild values (2,'ent~stand~expr');
1 row created.
SCOTT@demo102> insert into tild values (3,'rugby~football');
1 row created.
SCOTT@demo102>
SCOTT@demo102> set serveroutput on
SCOTT@demo102>
SCOTT@demo102> declare
2 type mytype is table of varchar2(20);
3 mytable mytype:=mytype();
4 mystr varchar2(20);
5 i number:=0;
6 begin
7 for x in (select text from tild) loop
8 mystr:=x.text||'~';
9 while instr(mystr,'~')>0 loop
10 i:=i+1;
11 mytable.extend(1);
12 mytable(i):=substr(mystr,1,instr(mystr,'~')-1);
13 mystr:=substr(mystr,instr(mystr,'~')+1);
14 dbms_output.put_line(mytable(i));
15 end loop;
16 end loop;
17 end;
18 /
pen
pencil
rubber
ent
stand
expr
rugby
football
PL/SQL procedure successfully completed.
SCOTT@demo102> Nicolas.
Similar Messages
-
Getting selected values from a data table
My data table gets values directly from a result set.
I went through http://balusc.blogspot.com/2006/06/using-datatables.html#top ,
however, the data table shown in this example takes values from a simple list. I have trouble in getting selected values.
Can anyone suggest how to select multiple values. here is a small code sample of what I have
SessionBean
ResultSet rs= db.retrieve_draft();
datamodel = new ResultSetDataModel();
datamodel.setWrappedData(rs);This is the JSF
<h:dataTable binding="#{Engineer.dataTable1}" headerClass="list-header" id="dataTable1"
rowClasses="list-row-even,list-row-odd" style="left: 144px; top: 192px; position: absolute"
value="#{SessionBean1.datamodel}" var="currentRow">
<h:column id="column1">
<h:outputText id="outputText77" value="#{currentRow['report_number']}"/>
<f:facet name="header">
<h:outputText id="outputText78" value="Report Number"/>
</f:facet>
</h:column>Edited by: ktip on Jul 29, 2008 11:04 AMHere is what I was doing :
This is my Session Bean (viz. SessionBean1)
private CachedRowSetDataProvider draft_infoDataProvider;
private CachedRowSetXImpl draft_RowSet;
public CachedRowSetDataProvider getDraft_info() {
return draft_infoDataProvider;
public void setDraft_info(CachedRowSetDataProvider draft_info) {
this.draft_info = draft_infoDataProvider;
public CachedRowSetXImpl getDraft_RowSet() {
return draft_RowSet;
public void setDraft_row(CachedRowSetXImpl draft_row) {
this.draft_row = draft_RowSet;
public void get_drafts()
Class.forName("com.mysql.jdbc.Driver");
String url = "jdbc:mysql://localhost:3308/test";
String dbUser = "root";
String dbPassword = "adminadmin";
con = DriverManager.getConnection(url, dbUser, dbPassword);
String sql="SELECT report_id from reports WHERE status='Draft' ";
ResultSet rs=null;
try
Statement stmt1=con.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
rs=stmt1.executeQuery(sql);
draft_RowSet=new CachedRowSetXImpl();
draft_RowSet.populate(rs);
draft_infoDataProvider=new CachedRowSetDataProvider(draft_RowSet);
result="ok";
catch(SQLException e)
System.out.println(e);
result="fail";
Here is my jsp page (developed in Netbeans 6.1) showing the data table
<webuijsf:table augmentTitle="false" binding="#{Engineer.table1}" clearSortButton="true" deselectMultipleButton="true"
id="table1" selectMultipleButton="true" sortPanelToggleButton="true"
style="left: 48px; top: 144px; position: absolute; width: 450px" title="Table" width="0">
<webuijsf:tableRowGroup id="tableRowGroup1" rows="10" sourceData="#{SessionBean1.draft_infoDataProvider}" sourceVar="currentRow">
<webuijsf:tableColumn headerText="report_number" id="tableColumn1" sort="test_report.report_number">
<webuijsf:staticText id="staticText1" text="#{currentRow.value['reports.report_id]}"/>
</webuijsf:tableColumn>
</webuijsf:tableRowGroup>
</webuijsf:table>Doing all this just resulted in a javax.Naming.Exception : Data Source is null
I tested this piece of code to give me the number of rows in the underlying rowset and it worked well. But somehow I could not get to display the data. Am I missing something?
Edited by: ktip on Jul 31, 2008 1:21 PM -
How to get SelectOneChoice value from a af:Table
JDeveloper v11.1.2.4.0 - JSF
Greetings,
im having a problem getting a column value that is a select one choice object.
This is not a common problem since i actually did different thing than others so please follow my problem
description and if you have any answer/questions please reply below.
I have create a Database View that returns me 3 columns, lets say TestCode, TestDescription, TestValue.
I have added one extra temporally column in my OV and called Temp.
I drag & drop my OV, delete Temp value, and its column position, i drag&drop a LOV that is from another View,
that shows me Doctor's name & surname and return doctor's id as select one choice value.
Im using a function that go thru the iterator, gets the rows, and save them in database (doesn't matter how).
The problem is, my selectonechoice, do not have row.bindings.DoctorId.InputValue but bindings.DoctorId.InputValue instead, so i can retrieve the current row's selectonechoice value.
So when my loop is finish and insert the rows in to my database, all row's doctor's id is the same since the binding do not change thru the loop.
I don't know how to get the current row's select one choice value to use the correct value on each row loop.
Here is my loop function:
DCBindingContainer bc = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding iterator = bc.findIteratorBinding("ExaminationsIterator");
DCBindingContainer bindings = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
RowSetIterator rsi = iterator.getRowSetIterator();
int i=0;
OperationBinding save_exams = bindings.getOperationBinding("SAVE_EXAMINATION");
OperationBinding save_exams_commit = bindings.getOperationBinding("SAVE_EXAMINATION_COMMIT");
try{
while(i < rsi.getRowCount()){
Row r = iterator.getCurrentRow();
save_exams.getParamsMap().put("CodeTest", r.getAttribute("CodeTest"));
save_exams.getParamsMap().put("Dates", r.getAttribute("Dates"));
save_exams.getParamsMap().put("CodeId", orderid.getValue());
save_exams.getParamsMap().put("Times", r.getAttribute("Times"));
save_exams.getParamsMap().put("DoctorId", resolveExpression("#{bindings.DoctorId.attributeValue}").toString());
save_exams.getParamsMap().put("IdPatients", patientid.getValue());
save_exams.execute();
rsi.next();
i++;
save_exams_commit.execute();
I get the current doctor's id binding and not each row's value.
Can you assist me on this please?I have created a work around solution, until any more expert than me come with more advance solution.
1) I add a LOV at doctor's id on target View object.
2) On runtime, i populate my Database View
3) go through all rows in my DB View iterator
4) add each row on the target View Object (missing the doctor's id, since i want that to be on runtime) & commit rows
5) after the loop is done and the target view object show me the results of the DB View, i choose on runtime the doctor's id and commit the changes so
the new rows, with new updated date will be finally populated to the database.
Hope this helps if anyone have a similar task.
Please let me know if you find a more direct solution, that working with 2 tables to populate 1. -
Get the value from destination db table
Hi,
I have a below requiremnt. Please suggest me how to do this.
From source(Oracle), I am getting three columns data and I have to insert this data into destination table. Two columns i have mapped diectly. Upto here no issue.
Think that my third column is country name and in the destination I have to insert the countryid instead of country name. Country master table is in destination db.How can I get the country id using the country name and how to insert this into my destination
table along with other two columns.
Thanks
Ramesh DIf you're not familiar with the lookup component, you may want to follow the guidance at http://www.katieandemil.com/ssis-lookup-transformation-example-sql-server.
If you need country id or null, it sounds like you could use "Ignore Failure" for how to handle rows with no matching entries. -
Get unique value for a range of values from a table
Please help to identify the sql to get unique value for following scenario
Table A has 3 columns
column1 column2 column3user7666373 wrote:
Please help to identify the sql to get unique value for following scenarioUnique combinations of three columns? If so:
select DISTINCT column1,column2,column3 from A;SY. -
How to get the plsql table data into output cursor
Hi,
Could anybody please help me.
Below is an example of the scenario..
CREATE OR REPLACE PACKAGE chck IS
PROCEDURE getdata(dept_no IN VARCHAR2,oc_result_cursor OUT sys_REFCURSOR);
TYPE get_rec is record (ename varchar2(20),
eno number(12));
TYPE t_recs IS TABLE OF get_rec INDEX BY BINARY_INTEGER;
emp_tab t_recs;
END chck;
CREATE OR REPLACE PACKAGE BODY chck AS
PROCEDURE getdata(dept_no IN VARCHAR2,oc_result_cursor OUT sys_REFCURSOR)
is
BEGIN
select ename, eno
bulk collect into emp_tab
from emp;
open oc_result_cursor for select * from table(emp_tab); -- I believe something is wrong here ....
END;
END chck;
the above package is giving me an error:
LINE/COL ERROR
10/29 PL/SQL: SQL Statement ignored
10/43 PL/SQL: ORA-22905: cannot access rows from a non-nested table
item
let me know what needs to be changed
Thanks
Manjumanjukn wrote:
once i get the data into a plsql table, how to get this plsql table data into the cursor?There is no such thing as a PL/SQL table - it is an array.
It is nothing at all like a table. It cannot be indexed, partitioned, cluster, etc. It does not exist in the SQL engine as an object that can be referenced. It resides in expensive PGA memory and needs to be copied (lock, stock and barrel) to the SQL engine as a bind variable.
It is an extremely primitive structure - and should never be confused as being just like a table.
Its use in SQL statements is also an exception to the rule. Sound and valid technical reasons need to justify why one want to push a PL/SQL array to the SQL engine to run SELECT 's against it. -
Hi,
In forms, I am storing some values in a plsql table(like an array). Everytime a value is chosen in the filter, I do a sequential search of the table to retrieve my values. As this is a single table the search is taking a long time.I would like to replace this with multiple run time record groups. My question is whether the storing and retrieval from record groups are in any way faster or slower than retrieval from a table? I dont know the exact row number. So I have to do a sequential read of the record group also. So it will be something like :
for i in 1..10 loop
v := get_group_char_Cell('col name',i);
end loop;
Is this faster than
for i in 1..10 loop
v := tab(i).col;
end loop;
Ps: The record group could be smaller than the table as it will be multiple. Table will be always be one.
Thanks in Advance.Hi ,
I have a filter which has certain values. When the value is chosen, I need to look thru either the table or record group sequentially to get the matched record and apply it. We want to make this process as fast as possible. Hence the question of using plsql table vs record groups vs GLOBAL table. I was given to understand that if the global table is indexed it could be as fast or faster than the plsql table. The advantage in using GLOBAL table might be that I can directly select the value instead of retrieving the entire PLSQL table and compare the values.
EG -
for i in 1..tab.count loop
tab(i).col = val;
end loop
select col into v from GLOBAL_TAB where col1 = val;
So which you think would be faster? Also consider the record groups.
Thanks in Advance. -
Distinct values from dynamic internal tabls
Hi All,
I have a dynamic internal tables like <dy_table> , i want to get distinct values from this internal tables,
how to do that, structure of dynamic internal tables is dynamic acc. to user conditions.
regards,
AnujHi Anuj
Just try this,
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = tb_fields_for_it
IMPORTING
ep_table = gp_dyn_table.
ASSIGN gp_dyn_table->* TO <gt_table>.
ASSIGN LOCAL COPY OF INITIAL LINE OF <gt_table> TO <fs_table>.
LOOP AT tb_output.
*To assign value for serial number.
ASSIGN COMPONENT 1 OF STRUCTURE <fs_table> TO <ls_field>.
<ls_field> = tb_output-sno.
UNASSIGN <ls_field>.
*To assign value for Sales Organization.
ASSIGN COMPONENT 2 OF STRUCTURE <fs_table> TO <ls_field>.
<ls_field> = tb_output-vkorg.
UNASSIGN <ls_field>.
*To assign Rate for its respective Condition type.
LOOP AT tb_konp WHERE knumh = tb_output-knumh.
READ TABLE tb_fieldcat1 WITH KEY fieldname = tb_output-kschl.
IF sy-subrc EQ 0.
lv_count = tb_fieldcat1-col_pos.
ASSIGN COMPONENT lv_count OF STRUCTURE <fs_table> TO <ls_field>.
IF tb_konp-konwa EQ '%'.
tb_konp-kbetr = tb_konp-kbetr / co_10.
<ls_field> = tb_konp-kbetr.
ELSE.
<ls_field> = tb_konp-kbetr.
ENDIF.
ENDIF.
ENDLOOP.
lv_count = lv_count + 1.
APPEND <fs_table> TO <gt_table>.
CLEAR <fs_table>.
ENDLOOP.
Hope this proves helpful to you. -
BDC-How to get the value of the screen field
Hi All,
I am facing a problem while writing the BDC code for the XK02 transaction.
Recording:
We have recorded like this :after giving the values in the initial screen(vendor no and purchase group and selecting the purchasing data check box) and enter into the second screen and then click on alternative data icon.There we ll have set of plants we have to check auto ordering (by selecting the plant and click purchasing icon)for the plants which are in the given file.
Problem:
Suppose there are five plants(like 1,2,3,4,5) for a particular vendor but we are having only three plants in the file for which auto ordering check has to be done.The problem is that its doing auto ordering check for the first three plants(1,2,3) in the transaction.But in the file we are having Plants like (1,3,5).How to get the screen field value directly or is there any other way to resolve the problem?Dear Raja,
You cannot get hold of screen values while running through the BDC Operation.
Only way you can get the value --> populating an Internal Table from the Database Table.
Regards,
Abir
Don't forget to award Points * -
Get the value from a selected row in a table
Hi all,
My table contains a tree structure.
When I select a single row, I need to get the value of a particular column.
I created an action on the leadSelect of the table and gave the following code:
public void onActionleadValue(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionleadValue(ServerEvent)
String strLeadValue = wdContext.nodeAttribute_View_Out().currentAttribute_View_OutElement().getAttributeAsText("<MyModelAttributename>");
wdComponentAPI.getMessageManager().reportSuccess("selected lead value "+strLeadValue);
wdContext.currentContextElement().setLeadselectedvalue(strLeadValue);
//@@end
My Bapi returns me 6 records. and when I click on any row its always pointing to the last record value.
What could be the problem?
Thanks
AnjanaHi Anjana,
Try this.
try
IWDMessageManager msg = wdComponentAPI.getMessageManager();
int leadselect = wdContext.nodeSChild1().getLeadSelection();
for(int i=0;i<wdContext.nodeSChild1().size();i++)
if(leadselect == i)
//Displaying output in diff table
// IPublicTestComp.ITableNodeElement tabelm = wdContext.createTableNodeElement();
// tabelm.setAttribute1(wdContext.nodeSChild1().getSChild1ElementAt(i).getAttribute1());
// tabelm.setAttribute2(wdContext.nodeSChild1().getSChild1ElementAt(i).getAttribute2());
// tabelm.setAttribute3(wdContext.nodeSChild1().getSChild1ElementAt(i).getAttribute3());
// wdContext.nodeTableNode().addElement(tabelm);
String att1 = wdContext.nodeSChild1().getSChild1ElementAt(i).getAttribute1();
String att2 = wdContext.nodeSChild1().getSChild1ElementAt(i).getAttribute2();
String att3 = wdContext.nodeSChild1().getSChild1ElementAt(i).getAttribute3();
msg.reportSuccess("Row ("i") : "att1"====="att2"======"+att3);
} catch (WDDynamicRFCExecuteException e) {
wdComponentAPI.getMessageManager().reportException("Message : "+ e.getMessage(),true);
Regards,
Mithu -
How to get string value from database table using Visual Studio 2005?
Hi,
Im developing plugin in illustrator cs3 using visual studio 2005. I need to get the values eneterd in database. Im able to get the integer values. But while getting string values it is returning empty value.
Im using the below code to get the values from database table
bool Table::Get(char* FieldName,int& FieldValue)
try
_variant_t vtValue;
vtValue = m_Rec->Fields->GetItem(FieldName)->GetValue();
FieldValue=vtValue.intVal;
CATCHERRGET
sprintf(m_ErrStr,"Success");
return 1;
Im using the below code to get the values.
AIErr getProjects()
char buf[5000];
int i;
std::string catName;
::CoInitialize(NULL);
Database db;
Table tbl;
errno_t err;
err = fopen(&file,"c:\\DBResult.txt","w");
fprintf(file, "Before Connection Established\n");
//MessageBox(NULL,CnnStr,"Connection String",0);
if(!db.Open(g->username,g->password,CnnStr))
db.GetErrorErrStr(ErrStr);
fprintf(file,"Error: %s\n",ErrStr);
fprintf(file, "After Connection Established\n");
if(!db.Execute("select ProjectID,ProjectName from projectsample",tbl))
db.GetErrorErrStr(ErrStr);
fprintf(file,"Error: %s\n",ErrStr);
int ProjectID;
int UserID;
int ProjectTitle;
char ProjectName[ProjectNameSize];
if(!tbl.ISEOF())
tbl.MoveFirst();
ProjectArrCnt=0;
for(i=0;i<128;i++)
buf[i]='\0';
int j=0;
while(!tbl.ISEOF())
if(tbl.Get("ProjectID",ProjectID))
fprintf(file,"Project ID: %d ",ProjectID);
ProjectInfo[ProjectArrCnt].ProjectID = ProjectID;
sprintf(buf,"%d",ProjectID);
//MessageBox(NULL, buf,"f ID", 0);
j++;
else
tbl.GetErrorErrStr(ErrStr);
fprintf(file,"Error: %s\n",ErrStr);
break;
//if(tbl.Get("ProjectTitle",ProjectName))
if(tbl.Get("ProjectName",ProjectName))
MessageBox(NULL,"Inside","",0);
fprintf(file,"ProjectTitle: %s\n",ProjectName);
//catName=CategoryName;
ProjectInfo[ProjectArrCnt].ProjectName=ProjectName;
//sprintf(buf,"%s",ProjectName);
MessageBox(NULL,(LPCSTR)ProjectName,"",0);
else
tbl.GetErrorErrStr(ErrStr);
fprintf(file,"Error: %s\n",ErrStr);
break;
ProjectArrCnt++;
//MessageBox(NULL, "While", "WIN API Test",0);
tbl.MoveNext();
//MessageBox(NULL, ProjectInfo[i].ProjectName.c_str(),"f Name", 0);
::CoUninitialize();
//sprintf(buf,"%s",file);
//MessageBox(NULL,buf,"File",0);
fprintf(file, "Connection closed\n");
fclose(file);
for(i=0;i<ProjectArrCnt;i++)
sprintf(buf,"%i",ProjectInfo[i].ProjectID);
//MessageBox(NULL,buf,"Proj ID",0);
//MessageBox(NULL,ProjectInfo[i].ProjectName.c_str(),"Project Name",0);
return 0;
In the above code im geeting project D which is an integer value. But not able to get the project name.
Please some one guide me.As I said in the other thread, this really isn't the place to ask questions about a database API unrelated to the Illustrator SDK. You're far more like to find people familliar with your problem on a forum that is dedicated to answering those kinds of questions instead.
-
Get Field Values from Table using Java api
I am using the example java code "RetrieveLimitedRecords" that can be found at :
https://help.sap.com/javadocs/MDM71/current/API/index.html
The code give the expected result and retrieves the record count for the main table
Now I want to get the values of the fields for one record
I added the lines:
Record[] records = recordResultSet.getRecords() ;
FieldId[] fields = records[0].getFields();
System.out.println ("Field Length = "+fields.length);
and the output is::
Field Length = 0
How can I get the fields of the record and read their values?
Thanks
NicolasAssuming you want every field, the equivalent of "SELECT *" in SQL, you can use the RepositorySchema object to get a TableSchema, and with that get all FieldIds for the table.
If your RepositorySchema variable is rs it would be something along the lines of:
TableSchema mainTableSchema = rs.getTableSchema(mainTableId);
ResultDefinition rd = new ResultDefinition(mainTableId);
rd.setSelectFields(mainTableSchema.getFieldIds());
Hope this helps,
Greg -
Get Qualifier value from Qualified table
Hi,
I am trying to get all the qualifier value for a qualified table. What is the best way to do it. Can I use QualifierSearchDimension to search for all the qualifier value.
Re: Lookup [Qualified Flat] type field how to use as a query condition? link gives us a way to do this , but it talk about getting the non - qualifiers only , so How can we get the qualifier values.
The link Search Qualifier Fields : MDM Java APIs gives us a way to this , but it is using old Java API , does anyone know how to do it using MDM API SP06.
Thanks and Regards,
SubhasisHi Subhasis,
The Search API's will only search for a particular value in the qualified tables. In order to read all the qualifier and non qualifier for a record, please follow the below mentioned steps.
Assuming 'rec' is the variable that holds the reference for the current record.
MdmValue lookUpVal = rec.getFieldValuel(<Field Id of the field>);
com.sap.mdm.valuetypes.QualifiedLookupValue val = (com.sap.mdm.valuetypes.QualifiedLookupValue) lookUpVal;
// Get the total number of qualified records present for that field
int size = val.getValuesCount();
// Iterate through each qualified record to fetch the details
for(int i=0;i<size;i++){
MdmValue nqVal = val.getValue(i);
if(nqVal != null){
MdmValue incVal = val.getQualifierFieldValue(i,<Field Id of the qualifier field value>);
Regards,
Ponraj M
Edited by: Ponraj M on Jul 10, 2009 10:12 AM -
Get cell value from Woodstock table
Hello,
I am using a Woodstock Basic Table from the NB palette.
One of the columns is editable and I need to get the updated values upon a button click event.
How do I get the value of a specific cell from the table?
ThanksHi Rajashekar ,
here is the code :
// Get a handle to the table footer bean
OATableBean tableBean = ...;
OATableFooterBean tableFooterBean = tableBean.getFooter();
if (tableFooterBean != null)
// Get a handle to the total row bean
OATotalRowBean totalRowBean = tableFooterBean.getTotal();
--Keerthi -
Get inputText value from ADF table
Hi
I have a read-only table and a custom column of inputText for entering values by user. My question is that how can I get inputText values row by row in backing bean?
I founded some solutions that got values from binding, but it isn't useful for me. I should get the user entered values.
I am so confusing than can't find any solution for this common need.
Thanks
Alihi user,
My question is that how can I get inputText values row by row in backing bean?
have a listener do as like of dvohra says.if it is not work for you means.
have DCIteratorBindings class grab the corresponding iterator then iterate row by row to get the value. but it should a persistent attribute.
thanks
Maybe you are looking for
-
I'm running FCP 5.1.3 on a MacBook Pro 17" with 2GB memory - my camera is HVX200. All went perfectly during shoot & edit. Now I can't print to tape. I followed the helpful posts on hooking up cameras via firewire and got the camera to go as far as sh
-
Ipod shuffle will not connect to itunes on win7
Ipod touch will not connect to Itunes on WIN7. Used to work on Vista but has never worked on new WIN7 computer. Tried several cables and tried an Ipod shuffle. No joy. Current version of Itunes, restarted apple services and checked USB driver install
-
How to get get PO Actual Price value in tocode me21n
hi there, Do any one know how can we get the Actual price value from me21n ? Actual Value is the result value from condition type in ech po Item. Where can i can this value from what table ? THanks
-
WDA + AIF : Get modified PDF source (XSTRING) after user input
Hi guys, I have this problem. I have an online adobe interactive form (ZCI layout) with fillable and dynamic attributes sets to 'X'. The interface is type "Dictionary Based" (not XML). I've created a wda that calls standard ADS function modules (FP_J
-
Where can I get a mouse for Mac OS 9? New ones say they're for Mac OS X.
Any one know where I can get a new mouse for OS 9? the ones at the store all say you need 10.4...This computer does have a manually install USB port, anyone know what will work or where to get one?