HVX200 Won't Print To Tape

I'm running FCP 5.1.3 on a MacBook Pro 17" with 2GB memory - my camera is HVX200. All went perfectly during shoot & edit. Now I can't print to tape.
I followed the helpful posts on hooking up cameras via firewire and got the camera to go as far as showing a still-image (from the canvas) on the LCD. This image changes whenever I stop the timeline (shows whatever frame I've got the timeline on but it doesn't move - the images are still-images only) The audio comes through - and records - perfectly. Camera won't record any images but records audio. The camera is set to MCR/VCR setting, using tape as media.
I removed the FCP preferences. I have Quicktime 7 installed. (Removed all receipts from QT.) I used disk utility to repair permissions.
My reason for print to tape: I have cinema screenings planned and want to project the film from a miniDV source instead of DVD because I think the quality (and reliability) would be better. [Any notes on this concept of mine would also be appreciated.]
By the way, as a test, I hooked the camera up to my PowerBook G4 with FC Express HD and the camera works perfectly as output device. I can print to tape there no problem. But the old computer can't run FCP 5.1.3 which is what I cut my movie on.
I cut the movie without the use of output device just the hard drives, my computer, and an Apple Cinema HD display. I have output successfully to DVD Studio Pro using Compressor.
MacBook Pro 17" Mac OS X (10.4.8) 2 GB Memory

Your cam settings HAVE to match your sequence
settings.
If you have the cam set to anything native, as in
24pn or 30pn, nothing will stream over firewire.
You haven't indicated either settings: cam or FCP
Need to know that.
Thanks for your reply... I'm getting closer to figuring it out. (I'm experimenting with camera settings now...)
I recorded the movie in 720 24pn. Does this mean I can't stream over DV - can't use the hvx200 as print-to-tape device?
My objective is to get image quality that will hold up when it's blown up to movie cinema screen size - the DVDs seem to show their compression when the image is big. Any suggestions on getting movie-house quality?
Thanks!

Similar Messages

FCE won't print to tape

This is one of the stranger problems I've seen; hopefully someone knows a solution!
FCE will capture fine, but it will not print to tape. The deck is recognized; it starts recording and everything, but no audio or video shows up. I've even tried a different deck and firewire cable.
I also tried sharing to the deck in imovie, but with the same results.
Is there a preference somewhere that would cause this?
thanks so much!

You're connecting via firewire and not USB, correct? Have you ever successfully printed to tape using this deck? Do you have a camcorder you could try instead? That would help isolate the problem.

Print to Tape

Does anyone have any suggestions on clearing a lot of DVCPro HD footage from my media drive? I'd like to print it to tape, but I only have MiniDV tapes for HDV footage. I assume that will be a pretty big drop in quality. I do have a Kona LHe card, but no tape deck other than my HVX200.
Would I use the media manager to do this?
Any ideas?
Lawrence

Sorry, VERY unclear on what you want to do. Why would you print to tape to clear out footage from your media drive? And that camera records DV to tape, NOT HDV...and DVCPRO HD to P2 cards. And yes, going from DVCPRO HD to DV will be a big quality hit.
Media Manager was designed for this...clearing up space. However, the option it has to do this will either copy the sequence using only the footage used in the cut, or totally erase all the footage other than what is in your cut. Unless you are done cutting, there is no point to this.
Running low on space? get more drives. They are cheap.
Shane

Print to tape problems-Get the audio but no video

I'm going from a QT file I brought into FCS and rendered, et al to tape. I'm able to get the audio track output but no video!
The QT original of my film was 720x486 NTSC 4:3 H.264 and is a .mov file format. Bringing this into FCS, FCS asks whether I want to automatically convert the thing to fit the specs offered in tape output - which, when I actually look in the dropdown for output settings, don't have a 720x486 but does have the usual 720 x 480. FCS chooses the 720 x 480. Ok, so fine. It converts the clip to 720 x 480 and playing back the rendered clip t 720 x 480 looks fine and saves to a QT file fine but when trying to get onto DV tape, the video won't print. I do know it's possible to get a print to tape of my film since a week or so ago, someone made a digibeta output of my film for me using FCS and it came out just fine (I didn't pay attention to what they were doing exactly and perhaps they did some magic that someone else here might be able to fill me in on...).
Anyway, I'm stuck - canNOT get the video track to output to tape. Any clues appreciated. I've been through the output setting module a million times, tried creating a new QT file original to work from, and have confirmed that the recorder works fine because other QT files we created worked fine - though they were 720x480. But shouldn't the conversion FCS does from 720x486 to 720x480 suffice????
Help!

H.264 isn't supported as an editing format in FCP... convert the files to a supported format. If it seems to be OK in playback in the Canvas, I'd suggest you export it as a QuickTime Conversion movie and choose DV as the format... reimport that and print to a DV deck/camera.
H.264 is a delivery format, not an editing format... resizing it probably hurt the picture too BTW... If it's really critical, then you should do the above to the source clips and re-edit, but choose ProRes as the codec, and keep it 720X486... no resize that way. Re edit in a ProRes sequence matching the frame rate and size. FCP will set it up for you when you drag to it just as it did before, but it will not resize in that case.
Jerry

HDV Print-to-Tape problems

About a half hour into a "print to tape" from an HDV sequence to a Sony M25U HDV tape deck, I get an error message that has something to do about a specified file being locked [first issue]. Since I could not determine which file it was having a problem with I decided to render a complete self contained Quicktime and then output that.
When I try to print that to tape it skips [second problem] and it appears to do that with any rendered quicktime. I would think that FCP should have no problems with files that it rendered. This happens with multiple tape decks and FCP workstations.
Anyone else experiencing this? Any suggestions on how to resolve this?
Thanks

Cody,
I have a Z7 which should operate pretty much like the FX1. I did this about a month ago and remember struggling with it. Here are my notes, which may or may not help. It is only vague in my mind at the moment, sorry.
1. I am pretty sure when editing I had Render Control set to ProRes, as you do. When I did print to video, I copied my whole sequence, then put it into a new HDV sequence where the render was set to HDV. This took a long time--2:1 on my MacPro Dual 3GHz. I also have starred here--"When copy to HDV sequence, check titles/etc to make sure aspect ration still OK."
2. I have this part starred--"EACH TIME print to HDV tape on Z7U, go into Easy Set-up and choose HDV 1080i60. Defaults to custom which won't work."
3. Here are some more notes I took, which aren't particularly clear to me at the moment
PTV with the "Different settings" box checked and have this be HDV (1440x1080i60). That may have had to do with the fact I was using the MXO and monitoring with a second monitor. May not apply to you. I also see the note "Playback HAD been set to none".
4. Also this last note:
"Camera AV set to HDV, not 'auto' for this. Usually have on auto. Also FW out HDV-->DV is still ON, which is what need for timecode through AJA. Still seems to record into camera as HDV. Instruction book says to turn this 'off' when record HDV to tape, but seems to work either way."
Hope one of these notes helps you. If I had to pick one to try first, it would be #2. I had it starred the most
Sharon

My ipad2 won't print e-mails to my hp photosmart 6520 printer

My ipad2 won't print e-mails to my hp photosmart 6520 printer

So when you open and email and tap the Reply arrow at the button you don't see a button for Print?

Printer won't print too- need a new printer head. i want to know if you have one in stock

Hi, my printer won't print and the error message states "bad printerhead". My printer model is HP officejet d 155xi. I need to know how much it costs or would it be cheaper to buy a new printer. Still have four cartridges of ink. Please advise. Thanks.

HI,
You can find the General prices for the printheads HERE, if you only have to replace one its ok, but keep in mind that the other printhead are likely to be just as old and might break down as wel.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

I have an hp photosmart c7280 all-in-one series printer won't print. error message, system problem

I have an HP Photosmart All-in-One C7280 series printer/fax/copier/scanner. I have been having issues with printing for the past few weeks. It is a wireless printer, with a jack into the wall (for fax) and it is plugged into a power source. I never used to have issues with it before, but recently, it won't print when I send a document to it to print. It will print its configuration pages, reports, etc if I select them from the Printer's menu but not when I send a doc to it to print. First it was saying it was offline, but I figured out how to override that by operating as an administrator and selecting "Use Printer Online" from the dropdown menu when I right clicked on the printer from the control panel. But now it says "Error: Printer failed to print document. System error".
Noooo clue what to do now. This is the only color printer we have so we kind of need it to work. We bought this printer off the shelf at a office store (before I started working here) and so we don't have any designated technichians to work on it. I asked the guy who services our Image Runner Copier to look at it but he had no clue what was wrong with it. Hopefully someone can help?

goestherain,
I need to know what operating system you are using to helps narrow troubleshooting a bit, what OS are you running?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Hp deskjet 1510 series won't print

We mloved recently to la Gomera (Canarian isle) and there I bought a hp deskjet 1510. It won't print when connected to my lap top, also HP with Windows vista, although it is connected, is on, and is the default printer. I tried everything the print and scan doctor suggested (like switch off fire wall, chekc print ooler, remove and reinstall driver and software etc) and everything else I found in support from HP. it still does not print. When connected to our other lap top, also HP but with windows 7, it works fine. The only thing I managed to print is a diagnostic page but it give only numbers and letters like SN = CN39a19mmp05yr 21 PG =81 12 PER = -5yr 22 FB = 0/0 etc. Tjat does nog help me :-(. does anybody know how to solve this?
This question was solved.
View Solution.

Hello,
Please try the below mentioned steps..
Click START > Device and Printer > Add a Printer > Add a local printer >
( if the printer is connected with USB )
Select "Use Existing Port " then Virtual USB from drop down , Click NEXT, in the Manufacturing list , select HP / Hewlett packard, and from the right pane , select Deskjet 6980 and complete the wizard
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Deskjet 3050 Won't Print Wirelessly

Hi there,
My new all in one 3050 won't print for me. It is "Offline" in the network page. I feel I have explored every avenue and it will still not print. The wireless network configuration page I printed says everything passed. The home network disagnostic tool says "software missing" after i click test connection. The print diagnostic tool fails on connectivity everytime. I can connect to the printer ip 192.168.1.3 in the browser 95% of the time but not always. My router is a Zyxel P-660HW-T1 v3. I'm really close to tears with frustration, I'm quite computer and networking savvy but I cannot fix this. please help, I'd be eternally grateful.
Kind Regards,
Larry.

Hello dkkenny1,
Are you running Windows on your computer? If so, I recommend running the HP Print and Scan Doctor. This tool provides a quick and easy way to diagnose and resolve many printing, scanning, and connectivity problems. Click the link below for details on how to download and run this tool:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03286146&lc=en&cc=us&dlc=en&product=4066452
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HP Officejet Pro 8100 Everything fine; Just won't print

HP Officejet Pro 8100 working on a Windows 8 PC
I like this printer, had it for a few months, worked fine at the start. For more than a week now, it just won't print. Troubleshooting reveals no problems with set-up or anyhing. No error messages. Files go to the printer, listed on the queu, but nothing happens thereafter. Help!

This solution was created to address the issue you've described.
Print jobs stuck in queue / No response
I am an HP employee.

Remote laptop won't print to new HP4622 wireless printer

My new HP 4622 won't print from wife's laptop (Compaq Presario CQ-60-224NR w/ Windows Vista) in another part of the house on my home Centurylink DSL network with very good connectivity. I have the printer installed at my desktop (Gateway Microsoft XP SP3) and it prints fine from the desktop. Does the printer software also need to be installed on the laptop? I sent a .jpg file to the printer from the laptop and it printed one line of unicode? code per page until I cancelled the job from the print queue. I have gone thru the installation guide a couple of times and nothing is fixed. Test results say that everything passed and install is successful. I downloaded and tried the print doctor wizard and it says no problems found. I have McAfee total protection running, could there be a firewall problem? I'm not sure about enabling ports or that sort of thing. I dumped a perfectly good Lexmark X7170 all-in-one because it wasn't wireless and we couldn't get it configured to print peer-to-peer. Now I have a new wireless printer and con't get to print remotely either. Hope you can help. Let me know if you need more info. Thanks.
This question was solved.
View Solution.

Hi Ken,
I would recommend giving the printer a static IP address for the wireless connection (not USB):
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you will have delete and re-add the printer on your computer. Do it this way:
0. Go to Start > Control Panel > Devices & Printers and delete all instances of the printer.
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
2. Click >> Start >> Control panel >> Devices & Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
If you're still experiencing issues try changing the channel on your router to 11 and the encyption to WPA.
Say "Thanks" by clicking the blue Kudos star in the post that helped you.

Report won't print to the end of width in Oracle E-Business Suite

Hello all,
I desperately need help to setup Reports 6i layout. I created a report for a 8.3 x 11.69" and it seems fine when I print directly from Reports Developer but when I register it in Oracle E-Business Suite 11.5.10.2 it won't print to the end of page width. It always cut the print in about 3/4 of page width. I already setup the report as a text and pdf but still no success. Enlarge the width and height of the report won't help either. Anyone can suggest something to help? Thanks.

Hi Clamarion,
Login as those users and check the preferences, or you can check the value from the backend (through FND_USER_PREFERENCES table).
About "Applications Start Page" profile option (Doc ID 729375.1)
https://forums.oracle.com/thread/940401
Thanks,
Hussein

Won't Print to Kodak 1400 Professional - "Printing" never ends

Hi - Using MacBook Pro 17" and Aperture. OS 10.4.x. Out of box, new Kodak 1400 Professional Printer worked fine, and printed several great pictures. A week later, I was unable to print anything at all. Printer Window shows "PRINTING" and the twirling barber pole thermometer, but it NEVER prints however long I wait and no error message.
I've opened and closed printer, restarted printer and computer, checked that the firmware is up to date, re-set the paper in tray, etc. ALSO, it won't print JPGS from Preview, or apparently anything.
What could have happened?
Fix?
David Ferleger
email [email protected]

I have no idea if this will help anyone, but it helped me. I had my Kodak 1400 working with no problems for quite a while. I never really printed much, but I did now and then. About two months ago, I ran out of paper and didn't purchase any more for a while. I finally got my two packs (so I could get the third free!) about two weeks ago. I now have two clients who need prints, a total of about 85 8x10s.
So, I setup the printer, installed the driver, and started going about my business. Setup the prints, got it all rolling, and prepared to run the first print through as I've found the first print on a new ribbon is a dud due to dust. Nothing happened. It went to "printing" and stared at me as though it were as dumbfounded I asked it to print as I was that it WASN'T printing.
That was yesterday. Since then, I've removed the driver about a bajillion times. Googled this, FAQ'd that, held my tongue appropriately, used different USB cables, different USB ports, removed the other printer, blahdy blahdy blah. Then, this afternoon while I was somewhere between awake and sleep, it hit me: why not try an older driver. I thought about it, and realized that since the last time I was using the 1400 successfully, I'd reinstalled OSX. What were the odds that when I downloaded the driver the last time, I downloaded the "wrong" driver and got the old one (1.0.2) instead of the NEW correct driver, 2.0.0.
So, I removed the old driver from everywhere I could. Restarted the computer. Installed 1.0.2, cliked print, and felt my heart sink as the red Error light blinked intermittently with the "Media" light. Shot through the heart... then, all of a sudden, it sucked in some paper, and started printing! Problem solved!
So, if you still can't print, try using 1.0.2. It might not work, but if you can't print with 2.0.0, what harm can it do? NONE! Muhahahaha. I feel so adventurous for using an old driver. (yes, this is what now counts as "adventure" for me... now go away or I shall taunt you a second time.)
Hope that works for someone!
--Mike
MBP 2.0ghz Mac OS X (10.4.7)

Won't print to photo tray, but will print test page

I have most current Vista driver, but can't print to photo tray. It won't pull the tray in, although it works great when printing test page. I tried various page/paper settings and "photo tray" light settings, but still won't print from Vista.
Tried 8250 printer properties, changing paper settings, but can't recognize settings, even though it sees the paper and prints the test page. Seemed to work just fine with XP.
This question was solved.
View Solution.

Plugged into an XP machine, photo printed.
Plugged back into Vista, fooled with the settings, then it worked!
I don't know what exactly fixed it...

HVX200 Won't Print To Tape

Similar Messages

Maybe you are looking for