Getting the end point to end point connections paths that exist from Switch Exe

Can I query the Switch Exe data base and get a list of the existing paths that Switch EXE has connected?
I have a debug app that reads the channel names (via a property node) and present them to the operator to manually connect and disconnect paths using the end points. I would like to have an indicator showing the current paths that are connected and I was hoping to be able to get that from Switch Exe without me having to add code to keep track of it myself.
The goal is to be able to click on any existing path to disconnect it. 
I do query the switch cards and display the actual relays that are closed, but that is hard to relate that to what channels that are connected when we have 8 matrix cards all interconnected.
Thanks
Omar
Omar

Hi Omar,
Try using something like the example below that incorporates an array to check every connection.  If the path is found to exist, then you could add that combination to an array that is displayed on the front panel.  Also see this knowledge base article about the known issue with the Find Routes VI.  Use the VI from the bottom of the page in place of the Find Routes from the palette.  Hopefully this helps!
Regards,
h_baker
National Instruments
Applications Engineer
Digital Multimeter Resources

Similar Messages

  • The end of data was reached while from reading from a container

    I keep on getting "The end of data was reached while from reading from a container" error message when I try to use the Filter > Camera Distortion Feature on Elements 11. How can I clear this?

    Thanks Barbara B.
    Yes that was along the same lines as the solution I found. Tried reinstalling a few times with no change. Eventually uninstalled and deleted all related files in my User folder, then reinstalled and bingo...back in business!
    My workflow thanks you!
    Cheers
    SP

  • I am unable to get the resize pointer to appear.

    I often use the resize pointer to adjust Excel column sizes and Desktop window sizes.  In perhaps the past month or so, I haven't been able to get this cursor even to appear.  If I hold the arrow pointer to a column edge or a window edge, it appears to flash very rapidly between the arrow pointer and the resize pointer, but I can't get the resize pointer to remain and be used.
    My apologies for opening a new issues, but I have not been able to find this issue clearly described, or any significant solution to cursor problems.  It took a lot of searching just to learn the term "resize pointer".
    I have a 2009-ish MBP and OS X 10.8.4.  I also have a Magic Mouse connected, but the problem occurs on either the mouse or the trackpad, and whether or not the mouse is connected.
    Thanks.

    Wow!  All fixed.  I ran defaults delete -g which did not show immediate improvement, but then I rebooted.  I must admit I did a Safe Boot, just to throw in one other solution I had seen.  However, everything is back to normal.  Thanks very much.

  • How to get the end time of an Interface?

    How to get the end time of an Interface?

    Hi,
    As per your reuirement. I will suggest to use IKM SQL to SQL append. and Before Insert statement in IKM u need to add one more step i.e update. Your update should be like this
    command on sourse.
    <%for (int i=0; i < odiRef.getDataSetCount(); i++){%>
    <%=odiRef.getDataSet(i, "Operator")%>
    select      <%=odiRef.getPop("DISTINCT_ROWS")%>
         <%=odiRef.getColList(i,"", "[EXPRESSION]\t[ALIAS_SEP] [CX_COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
    from     <%=odiRef.getFrom(i)%>
    where     <% if (odiRef.getDataSet(i, "HAS_JRN").equals("1")) { %>
         JRN_FLAG <> 'D'
         <%} else {%>
         (1=1)     
         <% } %>
    <%=odiRef.getJoin(i)%>
    <%=odiRef.getFilter(i)%>
    <%=odiRef.getJrnFilter(i)%>
    <%=odiRef.getGrpBy(i)%>
    <%=odiRef.getHaving(i)%>
    <%}%>
    Command on target..
    UPDATE <%=odiRef.getTable("L", "TARG_NAME", "A")%> T
    set <%=odiRef.getColList("", "T.[COL_NAME]", ",\n\t", "", "(UD2)")%> ='N',
    <%=odiRef.getColList("", "T.[COL_NAME]", ",\n\t", "", "(UD1)")%> =SYSDATE
    where (<%=odiRef.getColList("","T.[COL_NAME]", ", ", "", "UK")%>)
    in(<%=snpRef.getColList("", ":[CX_COL_NAME]", ", ", "", "UK")%>) and <%=odiRef.getColList("", "T.[COL_NAME]", ",\n\t", "", "(UD2)")%> <> 'N'
    check UD1 and UD2 columns.
    Hope this will help you.
    Regards
    Saurabh

  • How to get the entry point in the ActiveX/COM adaptor

    below is the description of the Demo of using the ActiveX/COM to call new seq . 
    API Demo
    1. Manually add a Message Popup step to the MainSequence of a
    new sequence file. Save the sequence file as launch.seq.
    2. Create another sequence file and save the file as caller.seq.
    3. In the MainSequence of the caller.seq file, add Action steps
    using the ActiveX/COM Adapter to call into the TestStand API and
    launch the launch.seq file in a new execution.You might need the
    following two methods to complete this step.
    . Engine.GetSequenceFileEx
    . Engine.NewExecution
    so the question as follows:
    1.i call the method of get sequencefileEx
    2. call the method of getmodlesequenceFile
    3.call the method of evalEntryPointNameExpression
    4.call the method of NewExecution.
    but at the step of 3. i haven't get the entry point.
    so how to solve this issue? thanks
    Attachments:
    QQ图片20140115200924.jpg ‏58 KB
    QQ图片20140115201708.jpg ‏100 KB

    This is a duplicate post of this:
    http://forums.ni.com/t5/NI-TestStand/How-to-get-the-entry-point-in-the-ActiveX-COM-adaptor/m-p/27005...

  • How to get the shipping point details nothing but (name , address, etc)

    Hi, i am having the billing document number from that i am fetching the delivery doc number and shipping point.
    how i can get the shipping point details from the shipping point number.in which table i  need to pass this shipping point number(VSTEL)?

    Hi Praveen,
    TVST Shipping point
    KNVS Customer Master Shipping Data
    VTTK Shipment header
    VTTP Shipment item
    VTFA Flow shipping documents
    TVSTZ Organizational Unit: Shipping Points per Plant
    B024 Shipping point
    TVSRO Shipping points: Countries in Which Routes are Defined
    TVSWZ Shipping Points per Plant
    You can get the details from ADRC table. Please note that the TVST table has got a field ADRNR, pls use the same field in identifying the number and goto ADRC table enter the number under the ADDRNUMBER. It will fetch the address details for you.
    For ex from the standard SAP: I have taken std 0001 shipping pt. When I run TVST table for shipping points I get to see that ADRNR field has 297 as the number. I take the same number 297 and goto ADRC table and enter it under ADDRNUMBER and it will give me the address details entered for shipping pt 0001.
                                                              (or)
    All Standard Reports which are available are as under:
    SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
    Shipping point -> Deliveries / Returns
    Shipping point Analysis - MC(U
    Shipping point Analysis-Returns - MC-O
    Reward if helpful,
    Regards,
    Harini.S

  • How to get the highest point of the taskbar

    I would like to show a JWindow just above taskbar.
    How can I get the highest point of the taskbar? Is there a way like System.getProperty("os.taskbarHeight") ?
    In MS windows the taskbar has standard height but in KDE the taskbar has variable height (I am not sure about Gnome). Moreover the taskbar sometimes is hidden. How Do I get if it is hidden or not?
    Thank you in advance.

    You would use the "Screen Bounds" and "ScreenSize" info to calculate what you want:
    import java.awt.*;
    import javax.swing.*;
    public class FrameInfo
        public static void main(String[] args)
            String laf = "javax.swing.plaf.metal.MetalLookAndFeel";
    //        laf = "com.sun.java.swing.plaf.windows.WindowsLookAndFeel";
    //        laf = "com.sun.java.swing.plaf.motif.MotifLookAndFeel";
            try { UIManager.setLookAndFeel( laf ); }
            catch (Exception e) { System.out.println(e); }
            GraphicsEnvironment env = GraphicsEnvironment.getLocalGraphicsEnvironment();
            Rectangle bounds = env.getMaximumWindowBounds();
            System.out.println("Screen Bounds: " + bounds );
            GraphicsDevice screen = env.getDefaultScreenDevice();
            GraphicsConfiguration config = screen.getDefaultConfiguration();
            System.out.println("Screen Size  : " + config.getBounds());
            JFrame frame = new JFrame("Frame Info");
            frame.setSize(200, 200);
            frame.setVisible( true );
            System.out.println("Frame Size   : " + frame.getSize() );
            System.out.println("Frame Insets : " + frame.getInsets() );
            System.out.println("Content Size : " + frame.getContentPane().getSize() );
    }

  • [iPad] How can I get the popoverController pointer in the viewController

    UIViewController* viewController = [[UIViewController alloc] init];
    UINavigationController* navcontroller = [[UINavigationController alloc] initWithRootViewController:viewController];
    UIPopoverController* aPopover = [[UIPopoverController alloc] initWithContentViewController:navcontroller];
    [aPopover presentPopoverFromBarButtonItem:buttonID permittedArrowDirections:arrowDirections animated:YES]; // popup the popoverView
    precondition：I can't pass the popoverController point to the viewController directly.
    How can I get the popoverController pointer in the viewController?
    I try to use the following function, but it can't get the popoverController:
    self.navigationController.parentViewController
    Message was edited by: MarginD

    There is no "book box in preferences' general".
    There is a new iBooks application that appears on Mavericks' dock.  It looks like this:
    Go there to add books from your Mac to your iPad.

  • I am trying to join my wireless network and I am getting the error "Could not join" A connection timeout occurred.

    I am trying to join my wireless network and I am getting the error "Could not join" A connection timeout occurred.
    Any suggestions

    It is very tough to help you when you don't fill out your profile, this is needed to get an idea of what your system looks like. Please read the Profile Update for instructions. Once you post that info then we have a starting point to begin helping you.

  • What are the key points to beconsider while upgrading from 4.7 to ECC 6.0

    hai
    What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
    please provide sufficient material
    points will be rewarded
    regards
    v.sridhar

    Hi Sridhar,
    Please visit the following links:
    http://service.sap.com/erp
    http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
    http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
    Select the Solution Area like Financials, Human Capital Management, Sales....
    Select module like MM, PP, SD, and QM.....
    Click on Search
    then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
    And also check the release notes of ECC 6.0 in service.sap.com.
    When you are upgrading from 4.6C to ECC6
    Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
    To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
    Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
    For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
    For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
    ECC6.0 supports UNCODE.
    For installing 4.6 you don't require solution manager key. It only having ABAP stack.
    4.6C supports NONUNICODE.
    Major difference is ECC6 is netwear product having WASJAVA+ABAP
    secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
    Please go through the link that is shown here and if there is any doubts then feel free to ask.
    Major difference is ECC6 is net weaver  product having WASJAVA+ABAP
    secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
    For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
    For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
    ECC6.0 supports UNCODE.
    For installing 4.6 you don't required solution manager key. It only having ABAP stack.
    4.6C supports NONUNICODE.
    Please also Refer sdn thread and make a small search where u can find lot of information Reg this
    olution Browser would give the differences (Features):
    http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
    Release Info:
    ECC 6.0:
    http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
    Refer below and search for posts on this topic on sdn
    There are so many differences between the version in different objects
    I
    These are the some of the settings that are differed in the two versions and in that two objects
    Please visit the following links:
    http://service.sap.com/erp
    http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
    http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    Upgrade from 4.6c to 6.0 ECC
    upgrade from 4.7 to ecc 6.0
    Please Do Reward If Really Helpful,
    Thanks and Regards,
    Sateesh.Kandula

  • TS1368 I am unable to connect to the itunes store; I get the message 'Itunes could not be connected to the itunes store.  An unknown error occured (-3212).  Also when I plug my iphone in to the computer it doesn't ever pick it up

    I am unable to connect to the itunes store; I get the message 'Itunes could not be connected to the itunes store.  An unknown error occured (-3212).  Also when I plug my iphone in to the computer it doesn't ever pick it up please help!!

    same here no solutions

  • What do I do when I get the message my printer is not connected? HP Officejet Pro 8500A e-All-in-One

    What do I do when I get the message my printer is not connected when I want to print wirelessly.? HP Officejet Pro 8500A e-All-in-One.  I have a macintosh computer using snow leopard.  I have used the printer for 6 months.  Nothing has changed.  I shut off the printer and turned it on.  The internet is working altough I will turn it off and on.  What do I do next?  Thank you.

    The easiest and fastest thing for you is to reset the printer to its defaults and then just install the printer again following the instructions in the manual when you received it.  If you don't have these you will find this on the HP web site.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • I have downloaded Disney HD tv to my sons ipod touch, but when he goes to watch it on his ipod we get the following error "Please check your connection and restart the application" or cannot connect to server". How can I fix this?

    I have downloaded Disney HD tv shows to my son ipod touch, but when he goes to to watch it we get the following error message " or "cannot connect to the server" How can we fix this?  Thank you

    You have to enter the Apple ID and password. You are running into the Activation Lock
    iCloud: Find My iPhone Activation Lock in iOS 7
    Is there a way to find my Apple ID Name if I can't remember it?
    Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
    How do I change or recover a forgotten Apple ID Password?
    If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

  • I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. Someone can fix this?

    I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. The app is on the home screen, and its downloading is blocked at its end, without showing the app like it should when it's finished downloadung. Does someone can help me and fix this please?

    Hi Tom
    Thanks for replying!
    I had heard that these switches didn't stack unless everything was identical.
    I only tried it at all out of pure desperation.
    I've applied and tested every version 3 firmware in standalone mode via a console cable and xmodem.
    They either never come up properly receiving decompression errors and reboot constantly in a loop.
    Occasionally they stall / jam and stay there displaying the same error with no rebooting.
    And twice out of 80-100 times I got it to boot to the username and password screen in standalone mode.
    But as soon as I made a change it crashed and started the rebooting cycle again.

  • I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live were we only have dial-up and the Apple Store said this is what I need.

    I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.

    Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.

Maybe you are looking for