Getting the error message

Getting the error message when trying to enddate the trainer
Start Date;26-May 1987 (Also the hiring date of the employee)
End date: 01-Jan-2013
The trainer does not exist or is not effectively employed during the resource period.

931161 wrote:
Getting the error message when trying to enddate the trainer
Start Date;26-May 1987 (Also the hiring date of the employee)
End date: 01-Jan-2013
The trainer does not exist or is not effectively employed during the resource period.
Please see (Unable End Date or Delete These Employees As Trainers As They No Longer Are Resources. [ID 1491672.1]).
Thanks,
Hussein

Similar Messages

I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?

I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?

Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

In iCal - I keep getting the error message " This calendar was created by Mail" and it will not accept any input; why..??

In iCal - I keep getting the error message “ This calendar was created by Mail” and it will not accept any input; why..??

use Disk Utility and Verify Permisions then fix and Verify Disk and fix, this should fix it.

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

answered in your other thread LR 4 suddenly no longer recognizes files.

I purchased Elements 13. When I tried to install I get the error message that it is not supported by Vista. Now what do I do?

I purchased Elements 13. When I tried to install it I get the error message that it is not supported by Vista. What do I do now?

If you can't install Windows 7 or higher or get a new computer with Windows 7 or higher, you won't be able to run Photoshop Elements 13.
There are many inexpensive refurbished or "off lease" computers available at very reasonable cost. Here is one example (scroll down):
Computers & Tablets, Desktop PCs, All Desktop PCs, Refurbished - Newegg.com

HT4623 When I plug my ipad to itunes i get the error message that it is not supported and I have to go to itunes and get itunes re-installed? i never had this problem before. if i do this will i loose all my files, music, etc?

When I plug me ipad to itunes i get the error message that it is not supported and that i have to go to itunes and get "itunes installer" and re-install. if i do this will i loose my files and music?

No, you should not lose anything.

I have just bought an iPhone 5 and it won't sync to iTunes. It says it needs iTunes 10.7, which I have downloaded and installed. I still get the error message and looking at "about iTunes" it says 10.6.3. What do I do??

I have just bought an iPhone 5 and it won't sync to iTunes. It says it needs iTunes 10.7, which I have downloaded and installed. I still get the error message and looking at "about iTunes" it says 10.6.3. What do I do??

Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X

How can i get the error message from the thrown/raised exception?

DB version:10gR2
Examples for this thread taken from
Want Stored Procs to get exectuted regardless of preceeding SPs Success or
I have a package with several functions and procedures inside.I created a caller procedure called callProcs, which will execute various procedures within the package in the appropriate order.
In the below example i cannot get the error message thrown from line 20
create or replace package body mypackage
is
variable_proc1 number;
variable_proc2 number;
variable_proc3 number;
v_result       number;
my_exception   exception;
procedure proc1
is
begin
select 8/0 into variable_proc1 from dual;
exception
          when others
          then raise my_exception; ----line 20
end;
procedure proc2
is
begin
select 1 into variable_proc2 from dual;
exception
          when others
          then
               null;
end;
procedure proc3
is
begin
select 3 into variable_proc3 from dual;
exception
          when others
          then
               null;
end;
Procedure caller_proc
is
begin
proc1;
proc2;
proc3;
v_result:=variable_proc2+variable_proc3;
dbms_output.put_line('The output is '||v_result);
exception
          when my_exception
          then
dbms_output.put_line('Heyyyyy the error is '||SQLERRM); -- exception caught at line 64 of caller proc
end;
end mypackage;
When i try executing the caller proc, i don't get the error. Instead i get the text User-Defined Exception as shown below
set serveroutput on
exec mypackage.caller_proc;
Heyyyyy the error is User-Defined Exception
PL/SQL procedure successfully completed.Edited by: user10633418 on Mar 10, 2009 11:30 PM

Thank you justin.
Sorry my earlier post was a bit ambiguous.
I wanted the error generated at proc1 to be captured at caller proc's Exception handling section (line 64) so that i could log the error to an ERR_LOG table.
I can actually log this error at proc1 itself like
exception
when others
THEN
error_message :='My custom message for the particular proc '||SQLERRM;
dbms_output.put_line(error_message);
logerror(error_message); --an autonomous error logging proc
raise;But there is a RAISE statement in proc1's exception handling, so the exception gets propogated to caller proc's exception handling section {color:#ff0000}*and another redundant row will be created at ERR_LOG table for the same error because there is a*{color}
logerror(error_message);--an autonomous error logging proc
in the WHEN OTHERS section of exception handling section of the caller proc
I want to avoid the creation of this redundant row in ERR_LOG table.

I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version. How do I update my PHONE and why is an itunes update being confused for my iphone?

I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version. How do I update my PHONE and why is an itunes update being confused for my iphone?

You need iTunes 10.0 or greater to update your phone...iTunes isn't confused at all. If you're on a Mac, you'll need OS X 10.5.8 or greater to update iTunes to 10.0 or greater.

When I attempt to connect to iCloud I get the error message: Apple id's email address cannot be verified. There is nothing wrong with my apple id and I do not want to change it.Any suggestions?

When I attempt to connect to iCloud I get the error message: Apple id's email address cannot be verified. There is nothing wrong with my apple id and I do not want to change it.Any suggestions?

Debi....
Try "resetting" your Apple ID password > Apple - My Apple

Why do I get the error message "unable to load page (HTTP 502) when I try to open Mobile Web?

I have an LG Octane 3 basic phone.   Does everything I need, phone and text, and I never was interested in web or e-mail capabilities until I recently upgraded our plan to the "More Everything" and was able to use data and check e-mail and access the internet.   Whenever I try to open Mobile Web, I get the error message "unable to load page (HTTP 502)".    As of March 31, 2015, all of us basic phone users lose the "Mobile Email" app on our phones, and will have to access web versions of our e-mail via the web. Which is currently unavailable and doesn't work.
Over a week ago, did a chat session with a tech support rep, and she indicated that either she or an engineer would contact me with how to fix the problem.   Have not heard anything from anybody, and the deadline is approaching quickly.   Have no need of all the excess features of a smart phone, nor do I wish to be forced to jettison a perfectly working phone for my needs and buy something I don't want to be able to do 2 simple things.............check e-mail to see if there's something that needs to be answered right away, and to check traffic reports when I'm on the road, or find something in an area with which I'm not familiar.     Not really too much to ask, you would think....   )
Has anyone else had this same problem, and if so, how do we fix it....??? My next move is a phone call, but those haven't always been very productive.
If any of you have any ideas why this error keeps coming up and the web can't load, and some on how to fix it, I would really appreciate some advice.
Thanks in advance.
Karen

Since the chat session got no reply, I contacted Verizon by phone and a very nice level 2 tech created a trouble ticket and sent it up the food chain. Got a call back, maybe 2 days later, and had a nice, although very long session with a higher level tech. They had determined that the browser for the LG Octane is an old one and no longer supported by Verizon.    We tried everything we could to download the Opera browser, but since I was totally unable to get Mobile Web to work, couldn't do it.   The only other possible "fix" was to totally reset the phone to factory specs and try it again.   That would mean a lot of work on my part to move anything I didn't want to disappear off the phone, and find a place to forward texts that had to be saved.   Caught our tenants lying about why the rent was late (again), and need that for when I put them back on a lease....
Long story short is that unless we try this total reset, which isn't a sure fix, either, anyone who isn't able to access the Mobile Web with the LG Octane will have to change their plan to avoid paying for data that you can't access using any method.
I ran a test with an app that I knew was no longer valid.....that was sending photos to PixPlace.   Got the exact same error message as when trying to access Mobile Web to get the web version of my e-mail.   That just verified that the 502 error is, at least in the LG Octane, for an app that no longer works.   After today, we'll get the same thing when we try to access Mobile E-Mail.
Have to admit, it's a real ****-off, but this shouldn't surprise me, since Verizon won't repair older copper phone lines if you are in an area where FIOS is offered.
I am going to immediately change my husband's and my cell phone plan to one without data, and see what I can find that will still give unlimited calls and text. The way my luck runs, they won't offer one for a decent price. The other half has some very long-winded friends and he was always running over minutes, and some months are very text-heavy and I'd go over my limit.   Absolutely HATE touch screens, and am not looking forward to having to get a new phone.

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

HT201413 I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the sign that says this application has failed because MSVCR80.dll was not found.

I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the banner that says this application has failed because MSVCR80.dll was not found. anyone have a fix suggestion? thanks

Click here and follow the instructions.
(98724)

Library Lost - Please HeIp I tried updating my old ipod & now all 10,000 songs in my library have an ! next to them and I get the error message "song " " could not be used because the original file could not be found" on every song I try to play

Please help - this morning I tried updating one of my old ipods for my wife (this ipod hasn't been updated in 2-3 years). I plugged it into my pc, it was recognized and the software updated. I created a new playlist and tied to sync the ipod. This ipod had never been used on this pc/itunes since the pc is only 2 years old. When I tried to sync the ipod it stated that it would have to erase all the old songs on the ipod prior to syncing. I clicked ok and it proceeded to wipe out the old ipod and sync the new playlist (~1000 songs). When the sync was complete there were only 6 songs from the new playlist (all purchased this morning from itunes) on the ipod and to my horror all ~10,000 song on my pc in itunes now have a ! next to them. Only my recent purchases from itunes do not. When I click on a song with the ! I get the error message "the song " " could not be used because the original file could not be found." How do I correct this issue - I am scared to hook my ipads or other ipods to my pc for fear of losing everything?!?!? I spent 100s of hours burning the 10,000 songs from my cd collection and do not want to have to do it again.
Any help is greatly appreciated.

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

I bought an eBook from iTunes. I can view/read it perfectly on my iPhone but when I try to open the eBook file on my iPad, I get the error message, "Cannot open book. This book is protected by an incompatible technology." Any ideas for me? thx

i bought an eBook from iTunes. I can view/read it perfectly on my iPhone but when I try to open the eBook file on my iPad, I get the error message, "Cannot open book. This book is protected by an incompatible technology." Any ideas for me? thx

Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry.

Getting the error message

Similar Messages

Maybe you are looking for