Getting User Accounts on Target Systems.

Hi All,
I want to get the user account info on the target system for an OIM user. I am trying to find the tables in which this info is stored. But as each target resource will have its own table for storing their respective user account information, so getting this result in a query for a user will not be possible.(Getting the target account info for all traget resources for that user.)
Can anyone suggest me a Thor API for getting this info.
TIA,
Andy

Thnx Kevin,
But as each resource has it own table to store their respective user accounts information. So how we can join these tables dynamically?. Can you just let me know the tables I can refer in the OIM DB. I have used so far ORC, OIU and OST tables for fetching the resource info. But any of these tables doe not contain the user account info on that particular resource. Any sample will be helpful...
TIA,
ANdy

Similar Messages

Data Buffer error USER_AUTH_FAILED: User account for logonid "SYSTEM"

All, I have the following errors on both the Quality and the Production system in our data buffer job.
com.sap.security.api.NoSuchUserException: USER_AUTH_FAILED: User account for logonid "SYSTEM" not found!
These entries will not process because they are generating an error about the loginid for the Username SYSTEM is not found.
So I am thinking that somehow the MII system is not capturing the correct username when they are being added into the Data Buffer Jobs, or there is something I am overlooking when I set up the databuffering.
Other entries that were in the data buffer jobs were listed as using the RS1000SVC-QMUSBATCH, RS1630SVC-PMIIBATCH User accounts. These are the accounts that our scheduled tasks run under.
Those entries process OK out of the data buffer jobs.
I did notice a similarity between the data buffer jobs in the quality and production systems as it pertains to the following transactions.
Production MII ver 12.0.7 (Build 20)
Muscatine%2FIntegration%2FSAP%2FPROD_CONFIRMED_INPUT_InsertQuery
Which is called from the MIIC1043_IDOC Message Processing Rule.
Muscatine%2FIntegration%2FSAP%2FHEADER_InsertQuery
Which is called from the MIIC1043_Control_Recipe_Download Message Processing Rule.
Quality MII 12.0.11 (Build 14)
Muscatine%2FIntegration%2FSAP%2FPROD_CONFIRMED_INPUT_InsertQuery
Which is called from the MIIC1043_IDOC Message Processing Rule.
So the commonality is that these transactions are being initaiated by the Message processing rules.
Are there known issues with data buffering from transactions initiated with Message Processing Rules?
Is anyone sucessfully using data buffering of transactions called by message processing rules?
Any help is appreciated.
Bob

Jeremy, Thanks for your reply.
There doesn't seem to be much detailed information on the use of Catagories with Processing rules in Help or in the forums. So let me see if I understand your suggestion correctly.
On the MII server create a processing rule for the message using a category instead of using a transaction, The message received by the message listener will be placed in a buffer. I am assuming these messages whould show up in the message monitor and not in the Data Buffer jobs/entries.
So in my transaction which normally processes this data I could add logic to access the message data; using the Message Service (Query, Read, Update and Delete) action blocks. I could pare down the selection by selecting messages based on the MessageCategory that I defined in the message processing rule. This will allow me to access the stored message data.
Finally use a scheduled Job to execute the transaction. The scheduled job would be run with a valid userID and Password so if it connection to the external database failed the enteries would be placed in the data buffer jobs with a valid userID credentials.
Does this sound like what you had in mind?

Can't get user account from 10.7.5 to Mavericks with Migration Assistant

I am perplexed about this one. I want to use migration assistant to get a user account from an old Mac Pro running 10.7.5 to a 2012 iMac that has Mavericks on it.
I've tried:
1 - Migration assistant over the network - migration assistant says the Mac Pro needs a higher operating system, but the computer can't be upgraded.
2 - Target mode of Mac Pro to iMac: Migration assistant sees the volume, but doesn't acknowledge any user accounts. It only acknowledges applications, and other files.
Any ideas folks. I simply want to bring the user accout over to the new computer and perhaps the applications.

LOL - I figured it out. I had to update the Mac Pro which included a new migration assistant update.

User accounts missing after system crash

I have an iMac running Lepoard
It reset itself possibly it got too hot.
After it had reset all of the user accounts seem to have disappeared.
The system goes through startup and presents a Logon dialog. The only user that shows up is a user called Other. This is not a valid user in the system.
The other piece of diagnostic information is that all keyboard keys during startup are ignored. Have tried getting to a CD boot, single user etc, nothing seems to be acknowledged.
Any thoughts as to what has happened or how to repair.

If you are able to I suggest you try a different keyboard for using the key commands at startup.
I would suggest a good third party repair utility like DiskWarrior or Drive Genius may be your best bet. If you are able to get a keyboard working with the Mac and you have the option then use target disk mode to mount your Mac on the Desktop of another Mac and back it up or if you have a bootable external HD then use that to boot the Mac up and again back up your data. Hardware can be replaced or repaired and applications can be reinstalled but data cannot unless you have a backup so make sure your data is safe first before you tinker too much.

OIM 9031: Best way to handle application/test account on target system.

Hi Guys,
I am wonder what will be the best way to handle application account created in target sytem . i.e. I have target system Active Directory and on non-trusted reconciliation, I also fetch application/test account which not going to match to any existing user ,but should be capture for reporting or any future action .
Any input or idea is most welcome !!
Cheers,
Ankit

There are basically two approaches to handle service accounts.
Either you model them as a free standing RO very similar to a normal AD account or you use the built in "service account" and associate the account with an already existing AD RO instance. I haven't used the "service account" approach in any customer project yet so I can't really comment on the details of that approach (hopefully someone else will be able to do that).
Are you sure that you have service accounts in AD that you can't attribute to a specific users? Most organizations require service accounts to be linked to a user or a group of users so that the need for the account to continue existing can be verified by a human. Having live accounts in your AD that no one can say what they do or why they exist is normally a very scary thought for most organizations.
Hope this helps
/M

Getting user account lockout continuosly

I am getting lockout continuosly for one account. I tried reconfiguring user profile and system restart. But still user account lock out coming..
I enabled audit logs and found failed logs. In that i am getting caller process id as 0x1a8.
I installed procmon, in that PID coming in numbers..
How to convert caller process id into PID or any other way to find which application that process is related to..

You could download the Account Lockout Status tool to get more information where the source is.
http://www.microsoft.com/en-us/download/details.aspx?id=15201

CS4-64bit in Vista - Keep getting "User Account Control" popup whenever I open a file! Argh

Anyone know how to turn off the lame User Account Control switch for Photoshop? Whenever I try to open a PSD file (even from Bridge), I get the annoying Vista warning window asking me if I really want to open the file.
Anyone know?

"I'm the only one who uses this computer so I naturally log in as
administrator. In order to not get the popup when I open it with PS, are you
saying I should turn OFF administrator settings for Photoshop.exe? Or should
I create a new user (for myself) without Administrator rights?"
Neither. If you create a new user without Administrator rights, you won't
get the popup, but you may not be able to access the file because of the
file permissions. The thing to do is find out what's denying you access to
the files and correct the problem.
To start, use Windows Explorer to locate one of the PSD files you get the
popup with. Right click on the file name and select "properties". The
properties dialog box will have a "security" tab. Select it. At the top,
there is a box labeled "Group or user names". That contains a list that
normally would contain 4 entries. "System", the creator of the file,
"Administrators", and "Users". You could have more or less entries than
that. Click on each entry in turn and the permissions for that group will
be shown in the permisions box at the bottom. Normally, the default is to
allow "Read & execute" for "Users" and full control for the owner, system
and administrators. Look for any that are marked "Deny". If the "Users"
group is missing and your id is not listed as the creator, that could also
be cause of the UAC prompt.
Do you see anything obvious? It's really unusually for this, I'd be curious
to hear what you found.
At the bottom of the security tab there is an Advanced button. Click it and
under the permission tab, it will show you where the file inherited its
properties. Permission are inherited, depending on what needs to be
changed, if you make the correction at the right level, you may be able to
correct the access problems with one change. Click the owner tab and you
can see or change the file owner. Some people just name themselves as owner.
There is quite a bit of information on how to assign and manage permissions
in the help file. Click on "managing permission entries" at the bottom to
access it. It's much to involved to go into detail here. Microsoft could
definitely have done a better job with the security documentation and the
user interface. Let's hope they do a better job with the next version of
Windows.
Turning off UAC is an easy out and you will not need to learn how to
establish permissions to stop the popup, but it will also allow a malware
process to make changes using your administrator rights without your
knowledge.
FYI, the first user defined after a clean install is assigned to the
administrator group by default. Subsequent users are not and are ordinary
users. If you are paranoid or just super careful you could create a second
ordinary user name for yourself as your normal account and reserve the
administrator id for maintenance and cleanup. I doubt many will do that.

Second user account crashes the system?

I'm really stumped; after enduring the migration assistant screw up and crash the newly installed Snow Leopard system on my macbook pro...THREE TIMES and finally ferrying all the documents and apps manually to my primary (home) account, I created a second user account to use for my office work. The home account seems to work fine, but when I logout and try to access the new, empty office account, it's like opening the door and stepping into blank space; all I get is the pink and blue astral plane and the spinning beachball of death!! The only solution is to press the on off button and reboot.
What do I do? This seems to be a different problem from the guest account accidentally wiping the hard drive clean? HEEELLLP!! I can't work until I can get my computer up!

Thanks VK and KT for the replies. I''ve done it both ways: I've deleted the second account and recreated it with a new name...still doesn't work. Changed the 2nd account from a Admin account to Standard, and that didn't work. AND I've tried logging out of one and directly into the other, and when that didn't work (because the system crashed) I started up from scratch and went directly to the second user account... and the same thing happened. LOL at least it's consistent <rueful grin>

How to classify new and old user account from idm system using SPML

hi all,
i can use SPML code to create new user on IDM system but, i can't classifying new or old user account
any advise ? very thank you in advanced.
athikom.

Hi Vikram,
Iam not sure though, did you chekced EXIT_SAPMM06E_022 if it helps you in anyway.
Regards,
Swarna Munukoti

Reconciliation for the deleted user accounts on Target Resource

Hi,
I am trying to run reconciliation on a DB Table as the target resource. It is linking the user accounts that are present in the target resource.
But for the user accounts that are deleted on the target resource Reconciliation is not showing any action on the IdM user accounts under resource profile. The resource object link still shows the status "Provisioned".
Ideally when the users are deleted on the target resource User's profile, Does it require any customizations to make the resource assignment status to "revoked" instead of "Provisioned".
Any response would be of great help.
Thanks in advance.

See there could be two possibilities only:
*1) User Status Recovery via trusted Reconciliation*
Associated field in OIM responsible for it - Status field of OIM User Profile -> Check Process Definition for Xellerate User or any Trusted resource in "Reconciliation Field Mappings" section
Valid values are : Active, Disabled and Deleted
*2) Account Status Recovery via target Reconciliation*
Associated field in OIM responsible for it - OIM_OBJECT_STATUS field from Process Data Field -> Check Process Definition for Your custom resource of DB App Table in "Reconciliation Field Mappings" section
Valid values are : Enabled, Disabled and Revoked
So you are trying to achieve the second part.
Hope its clear.
Thanks
Sunny

Create user account on TARGET Golden Gate

Can I create a independent user account on Golden Gate Target ?. This is like we do on a logical standby server.
the user account in question does not exist in the source.
If yes, what are the steps invloved if any that is not normally followed.

Let me rephrase my question :
I have an GG set up between a AIX server ( source) and Linux server ( Target). Currently it is functioning and replication is upto date. I want to create a separate user account on the TARGET. This user account does NOT exist on the SOURCE. Is this possible ?
In other words in a logical standby env, we are allowed to create addition user accoints that are not part of the primary database. Those accounts will have their own objects such as tables, views etc.

User account changes to system account

I created a few pages and approved them. When I goto View All Site Content>>Pages
I see that "Modified by" column shows "System Account" instead of my user id.
Any one had this problem ?

Hi,
You've probably used your account as a system account for SharePoint, when you installed it. SharePoint automatically changes the name of the system account to 'System Account', instead of DOMAIN\Administrator or something like that.
So, it's by design. You can fix it by changing the system account to another account in SharePoint.
- Mart

How to get my accounts pane in System Preferences to open.

The accounts pane of System Preferences won't open it simply loads and then System Preferences quits. I have repaired disk permissions many times but it hasn't helped. I don't have the reinstall disks to fix the computer. What can I do?

Hi Miss Moo,
Could it be anything related to this, it can happen spontaneously also?
Return to default desktop, apparent "loss" of home directory...
http://docs.info.apple.com/article.html?artnum=107854
ChangeShortName 10.4 only...
http://www.macupdate.com/info.php/id/16620
If not...
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!
applesetupdone...
http://discussions.apple.com/thread.jspa?messageID=6059333&#6059333
http://www.askdavetaylor.com/howdo_i_reset_my_mac_os_x_admin_rootpassword.html

Can't inherit role privileges to user accounts in targets.

Hello,
We have the role MXGR0001 and it has a privilege associated (PRIV:GROUP:AD:CN=UMonterrey,OU=Security,OU=Groups,OU=Monterrey,OU=Mexico,DC=mabenet,DC=corpmabe,DC=com)
as is indicated on u201CMember Privilegesu201D tab. When we see the privilege properties, it says the role is a member from this privilege.
In the u201CTasksu201D tab of the privilege, we have associated a task in the part of u201CProvisioning Tasku201D, our task is u201CCreateADSUseru201D, the reason of this association was because at the moment of the assignation of the role, the task associated to the privilege could be executed and the privilege could be associated to the user.
Note: The Active Directory user has static values just to see the association with the privilege.
For example, we wanted to associate the user 1000611 with the role MXGR0001, it works fine, but when I look for the created user in Active Directory in the tab "Member of" of my user, the privilege is not associated. Do you know why this is happening? or do you know how to associate privilege to an Active Directory User from the Identity Center, which are the fields or tasks that I need to change into the Privilege or Role?
I hope you could help me with this!
Regards!
Edited by: Andrés Alavez on Nov 8, 2011 11:13 PM

That's a bit unusual, and perhaps if you start the computer from the OS X
Install disc and run Disk Utility's first-aid from that version on the booted
install disc; have it 'repair disk' and also 'repair disk permissions.'
Sometimes, just starting in SafeBoot, then 'repair disk permissions' from
Disk Utility in the Utilities/Applications folder (see Go in Finder menu,
choose Utilities folder; find Disk Utility; launch) and when it is done,
quit Disk Utility and restart and allow the computer to boot normally.
This may resolve the user account issue; or it may not.
See various instructions (can be used outside of context)
"Resolve startup issues and perform disk maintenance
with Disk Utility and fsck" - http://support.apple.com/kb/TS1417
In a worse-case scenario, an "archive & install" and update may be
required, if an issue cannot be resolved through other means. More
would need to be known about the machine, its use & status before
suggesting any one course of action. There may be something else
behind the symptom you described.
Good luck & happy computing!

I get error: account locked of system user

helllo
i get constanty the error: account locked for the system user
i need to unlock it for constant how can i reach this task ?

784633 wrote:
i type the wrong password ... my mistake
i want to disable the locking of the user systemNo you don't. That is a security hole.
What you want to do is find out where the bad connection attempts are coming from and address that issue.

Getting User Accounts on Target Systems.

Similar Messages

Maybe you are looking for