Gibt es einen Data Plug In für Almemo Datenlogger 2590

Wir haben einen Datenlogger Fa Almemo 2590 für Klimadaten im Einsatz.
Ein älteres Data Plug In für Almemo Geräte hat zwar die Messkanäle einwandfrei importiert aber nicht den  Zeitkanal .
Grund scheint zu sein, dass zur Datenreduktion unser neues Gerät das Datum nur einmal erfaßt und dann erst wieder nach der letzten Messung ( 23:59 Uhr ) ein neues Datum im Almemo Zeitkanal hinterlegt.
Beim importieren mit dem alten Data plug  in ergänzt Diadem die fehlenden Datumsangaben mit 01.01.0000 usw. bis wieder ein
 reales Datum aus dem Almemo Zeitkanal erfaßt wird.
Dadurch steht  jedoch keine echte Zeibasis zur Verfügung um die Klimadaten mit anderen Messungen zusammenzuführen.
Gibt es für diesen Datenlogger ein passendes Data Plug in ??
Jürgen    

Hallo juergen300,
unter diesem Link kann ein Almemo-PlugIn heruntergeladen werden:
http://zone.ni.com/devzone/cda/epd/p/id/42
Aber das ist vermutlich das was Sie schon haben.
Ansonsten können Sie sich auch selbst DataPlugIns schreiben, wie hier erklärt:
http://zone.ni.com/devzone/cda/epd/p/id/4822
Eventuell besteht auch die Möglichkeit ein PlugIn von einem unserer Alliance-Partner schreiben zu lassen.
Einen entsprechenen Partner finden Sie hier: http://www.ni.com/alliance/ oder kontaktieren Sie ihren regionalen
Vertriebingenieur von National-Instruments.
Regards
DianaS

Similar Messages

  • Data Plug In für Messgerät Fa Ahlborn - ALMEMO 5690-2M

    Wir benutzen zur mobilen Datenerfassung ein Messgerät-Logger ( ALMEMO 5690 -2M ) der Fa Ahlborn .Wir möchten die erfassten Daten ( Temperatur + Drücke  max 40 Kanäle ) mit DIADEM 10.1 auswerten . Gibt es ein Data Plug In für dieses Gerät bzw hat jemand schon ein solches erstellt ?
    Juergen Rausch

    Hallo Jürgen,
    unter ni.com/dataplugins finden Sie ein DataPlugin für CSV-Dateien (comma separated values) die vom Almemo 8990-8 gespeichert wurden. Vielleicht funktioniert das auch für Ihr Gerät?
    Falls das existierende DataPlugin nicht funktioniert, wäre ein Link zur Beschreibung des Almemo-Formats (am besten mit Beispieldateien) sehr hilfreich.
    Viel Erfolg,
    Ralf

  • Finder menu not accessible. When clicking finder menu all icons blink. Clock gone. Safari quits "help data plug in" Etc.

    When I attempt to click anywhere on my top menu bar all of my desktop icons blink and I am not able to access anything such as my apple icon, shut down or restart or file, etc. My clock is gone, my search bar is gone, etc. Safari also keeps quitting unexpectedly while using the "help data" plug in. I can attempt to add video of the action if necessary if you need it.  Any help would be really appreciated. First time using the community. Thank you!

    Update: If I click somewhere in the menu bar everything flashes as previously posted. But if I click the menu bar again after the flash I can then access the options in the bar, but everthing still missing as reported and safari crashing.

  • Displaying signed 8 bit integers using a data plug-in

    Hi there,
    I'm currently using DIAdem 10.1 and I'm writing a data plug-in in order to read binary data. What I'm missing is a data type "eI8" to read and display 8 bit signed integers. Obviously, to get the data into a channel, I have to use the data type eByte, but how do I make DIAdem display it as a signed value in the data portal?
    Many thanks in advance!
    Regards,
    Stefan

    Hello Stefan,
    you can use the method:
    Value = Object.GetNextBinaryValue(eDataType)
    eDataType
    Aufzählung.
    Bestimmt den Datentyp des auszulesenden Werts.
    2 - eI16
    16-Bit-Integer.
    3 - eI32
    32-Bit-Integer.
    4 - eI64
    64-Bit-Integer.
    5 - eByte
    Byte.
    6 - eU16
    16-Bit-Unsigned-Integer.
    7 - eU32
    32-Bit-Unsigned-Integer.
    9 - eR32
    32-Bit-Real.
    10 - eR64
    64-Bit-Real.
    Regards,
    Rebecca Fox
    Applications Engineer
    National Instruments

  • Data plug-in for binary data with byte streams of variable length

    Hi there,
    I would like to write a data plug-in to read binary data from file and I'm using DIAdem 10.1.
    Each data set in my file consists of binary data with a fixed structure (readable by using direct access channels) and of a byte stream of variable length. The variable length of each byte stream is coded in the fixed data part.
    Can anyone tell me how my data plug-in must look like to read such kind of data files?
    Many thanks in advance!
    Kind regards,
    Stefan

    Hi Brad,
    thank you for the very quick response!
    I forgot to mention, that the data in the byte stream can actually be ignored, it is no data to be evaluated in DIAdem (it is picture data and the picture size varies from data set to data set).
    So basically, of each data set I would like to read the fixed-structure data (which is the first part of the data set) and discard the variable byte stream (last part of the data set).
    Here is a logical (example) layout of my binary data file:
    | fixedSize-Value1 | fixedSize-Value2 | fixedSize-Value3 (=length of byte stream) | XXXXXXXXXXXXX (byte stream)
    | fixedSize-Value1 | fixedSize-Value2 | fixedSize-Value3 (=length of byte stream) | XXXXXX (byte stream)
    | fixedSize-Value1 | fixedSize-Value2 | fixedSize-Value3 (=length of byte stream) | XXXXXXXXXXXXXXXXXXXX (byte stream)
    What I would like to show in DIAdem is only fixedSize-Value1 and fixedSize-Value2.
    ´
    If I understood right, would it be possible to set the BlockLength of each data set by assigning Block.BlockLength = fixedSize-Value3 and to use Direct Access Channels for reading fixedSize-Value1 and fixedSize-Value2 ?
    Thank you!
    Kind regards,
    Stefan

  • C++ data plug-in for DIAdem

    Hello,
    I need to developp a C++ data plug-in for DIADem, I read it's possible, but I don't find any information about how to do this.
    I downloaded the labview_dataplugin_sdk_2011.exe because I'm using DIAdem 2011.
    Does someone now how to do this in C++ and where I can fine C++ example ?
    Futhermore, the measurement file is associated to 2 other files, one containing the channels and the frequencies, the other containing the scaling information for analog input. The scaling is polynomial and more than degree 1.
    Is it possible to create a data plug-in that reads information in 3 files ?
    Is it possible to set polynomial information instead of factor and gain for scaling settings ?
    Thanks.
    CFOE
    Solved!
    Go to Solution.

    Hello Andreas,
    I know that there is a Labview sdk to develop such plug-in but I didn't find something about the C++ one although NI said me that it could be done.
    I searched on the website and the forum but I didn't find the API and documentation.
    If you know where I can download it, it would be great give me the information.
    Thanks.
    CFOE

  • The latest firefox 33.0 doesn't display the tamper data plug-in. I need the plug-in for research purposes

    I had to use the tamper data plug-in for my assignment in Software security course. The plug-in has installed correctly but it is not being displayed. Am I doing it any wrong or else is there a problem with the new firefox?

    Have you been using the Tamper Data extension in an earlier version of Firefox?
    Is the problem that there is no visible way to call up or configure Tamper Data? I don't use this extension myself, but generally speaking, you could check the following locations:
    (1) Tools menu
    To display the classic menu bar temporarily, tap the Alt key. To make it persistent, after tapping Alt, use View > Toolbars > Menu Bar
    (2) Developer Tools menu - in case it now integrates here
    * "3-bar" menu button > Developer
    * menu bar: Tools > Web Developer
    (3) Unused buttons - in case it has a button that just isn't on any toolbar
    Use the Customize feature to check the available buttons and drag to the desired location. See: [[Customize Firefox controls, buttons and toolbars]].
    Can you find a way to run it?

  • Data Plug In for FAMOS (*.raw)

    I am lookimg for a data plug in to load FAMOS data (*.raw). Where can I get this data plug in?

    Hi Mavis,
    Thanks for your reply.
    Date and time of famos data were created by IMC device. 
    The following attachment is an example to get waveform's t0, but I did not get what i want .
    Attachments:
    Load_famos_raw_data.vi ‏63 KB
    plugin.zip ‏100 KB
    raw data.zip ‏14 KB

  • Verizon RJ45 data plugs - proprietary?

    Does Verizone use a proprietary data plugs?  I'm trying to move the location of my modem and had to run new Cat5 cable.  The plugs I got at Home Depot don't fit - too big.  Is there another type?
    Wikipedia states: There are two types of 8P8C plugs, sockets, and diesets (used for crimping): Western Electric/Stewart Stamping (WE/SS) and Tyco/AMP. While both types look remarkably similar, they are mutually exclusive and cannot be interchanged. Tyco/AMP 8P8C plugs are proprietary, and have smaller spacing between contacts than the WE/SS style.
    Does Verizon use Tyco?  Can we get them?
    Thanks.

    I found another user's description of the install (I guess my installer added a block/jack to anchor the cable inside the house as it comes through the wall):
    The ONT acts like a miniature central office. To my house it provides four POTS lines for voice service and one 10/100 Mbps Ethernet port for data service. The ONT accepts a single fiber-optic cable that connects all of these services back to Verizon’s central office.  To provide data service to my house, the installer ran a CAT-5 cable from the ONT’s 10/100 Ethernet port into my house, where it plugs into a D-Link 4-port “Ethernet Broadband Router,” provided by Verizon for free.
    There's a picture at:
    http://images.google.com/imgres?imgurl=http://community.moertel.com/~thor/pix/20051115/img_0820.jpg&...
    Still trying to determine if Verizon has a special plug for that data port.

  • In der Mac-Version von CC Photoshop gibt es einen Anwendungsrahmen, in dem die CC Photoshop Version aufgewührt ist. Gibt es diese Möglichkeit auch unter der Windows-Version?

    In der Mac-Version von CC Photoshop gibt es einen Anwendungsrahmen, in dem die CC Photoshop Version aufgewührt ist. Gibt es diese Möglichkeit auch unter der Windows-Version?

    Musste mich auch erst durchfragen......   siehe Anhang.
    Am 20.06.2014 15:48, schrieb Doc Maik:
    >
          In der Mac-Version von CC Photoshop gibt es einen
          Anwendungsrahmen, in dem die CC Photoshop Version aufgewührt
          ist. Gibt es diese Möglichkeit auch unter der Windows-Version?
    created by Doc Maik <https://forums.adobe.com/people/Doc+Maik> in
    /Deutsche Foren/ - View the full discussion
    <https://forums.adobe.com/message/6477895#6477895>

  • Problem with the data plug-in ATF

    Hello everybody,
    I am trying to load the attached file with Diadem. Normally, it should open thanks to the plug-in ATFX. However, Diadem manages to load it, but when I go through the channels, they all are empty (NO VALUE). One of my collegue tryed to open it and for him it works... I don't understand what happens. Couls you help me please? Thank you.
    Attachments:
    test03_1_101.ATF.zip ‏58 KB

    Hi ernoult,
    It looks to me like this ATFX file contains the data model and all meta-data (attributes) but references most of the channel (measruement_quantity) values in external files.  My guess is that there are other files on your colleague's computer that start with "test03_1_101" but end with something other than ".atfx".  You need to copy those files to the same folder on your computer that contains the "test03_1_101.atfx" file.
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • Nikon D7200 Camera Raw Data plug-in..

      Just bought Nikon D7200 yesterday and now find out that my Elements 12 software will not process my images because the Raw Data profile for the D7200 is not in the files...Anyone else hear of this or know how to get the plug-in update ?

    We are just users like yourself, and have no insight as to what Adobe's plans are. It is likely that there will be an update that will include the D7200. It will be supported at some point. But it will be necessary to see how Camera Raw and updates transpire to know whether or not there will be an update for Photoshop Elements 13 that will support the camera..
    Anyone who knows the answer is restricted by nondisclosure agreements. So it really is simply a wait and see situation.

  • Vimeo audio stutters in Safari 7 (Mavericks), Flash Player up to date, plug-ins are switched ON, extensions switched OFF.

    Noticing this problem recently, guessing it has been occurring since the update to Mavericks.
    Video from Vimeo is streaming fine but the audio stutters from the beginning and never improves.
    As the title suggests, I have ensured that my Flash Player is up to date, I have switched off the new Safari feature which will turn off plug-ins to save power (so the plug-ins are allowed to run immediately on my system) and I have switched off all Safari extensions.
    I have found a number of threads in the communities but no solutions so far.
    No problems with YouTube audio.
    And no problems with Firefox or Chrome - audio is flawless. It is a Safari-issue.
    Anybody got any ideas?

    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Follow the prompts.
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Allow  Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.
        Press " Manage Website Settings" button for more options.

  • Errors using SIF data plug in?

    I am trying to open a SIF (somat informtaion file) file using the SIF data plugin found on the NI website.  It works great for files less than 1 GB.  When I try open files larger than 1 GB I get the following error.
    Error Type: Access Violation
    Error Address: 004E53E
    Module Name: dacasr.dll
    Thanks,
    Noah
    Solved!
    Go to Solution.

    Hi Noah,
    I was able to drag and drop your SIF file into my DIAdem 2011 without trouble-- I have a Win7 64 bit laptop with 8 GB of RAM.  I converted it to a TDMS file and zipped it up and reposted it to the NI outgoing site.  See if you can work with this file on your computer any better:
    ftp.ni.com/outgoing/sif_sample_TDMS.zip
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • Gibt es einen Update auf win7/64 für Photoshop Elements 1.0

    gibt es ein update auf win7/64 für Photoshop Elements  1.0

    Nein. Macht ja auch keinen Sinn. Deine Software ist über 10 Jahre alt.
    Mylenium

Maybe you are looking for