Gige ethernet camera lost its connection while running

Dear All,
I am using a Gige ethernet camera for triggered acquisition.I need to achieve a network speed of 1Gbps with 9000 maximum packet size for my application. But sometimes this network speed drops down to100Mbps with 1450 packet size due to noise and some other artifacts which leads to  lost camera connection from system.To again get camera in connection I need to close the application and restart it .Sometimes I close the application and reconnect the ethernet cable to get camera properly connected with the system.
As I cannot completely get rid of noise and other interefrence I want to connect and configure a disconnected camera in run time.So on error of device connection lost I tried using IMAQdX unconfigure acquisition.vi and IMAQdX configure acquisition.vi but it was of no use.Then I tried to close camera connection first and repeated whole the procedure of opening and configuring the camera but everything done was of no use.
Please suggest me any solution to this problem.
Thank You
Anagha

Hi Anagha.G,
It's not only with ethernet, infact with every other camera/hardware.
Whenever u open a device during starting phase, the labview gets hold of the device driver.
If the device is not properly closed for some reason during some processing, the device handle will be locked and labview will not be able to get hold of device back.
For that to happen, i think the probabilistic solution is only close labview which is using the device and restart the code.
May be try, not only unconfiguring but also close the connection and try reopening during an error and check (may work).
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

Similar Messages

  • DateField lost its style while running

    I found out that datefield control has lost its style (all of style)
    My app is calling dialog like this
    Application
    > Module
    > Title Window "A"
         > Title Window "B"
              >Title Window "C"
    at Title Window A, B, C have datefield but in Title Window "C" all date field had lost all their style and throw error message cause of it not found "headerColor" style (error message from control processing)
    but other process that use the same code same function as this except it start call Title Window "A" from a Canvas had no problem
    Application
    > Module
    > Canvas
    > Title Window "A"
         > Title Window "B"
              >Title Window "C"
    (flow like this)
    anyone tell me how it happen and how to solve this problem

    I had the same situation (TitleWindow call from canvas in one of the application module, Flex SDK 4.1) when DateField and DateChooser controls have lost styles (and skins).
    I solve this problem by adding private var df:DateField = new DateField();   to my application. There were no references to the DateField in application before I added this code.

  • "Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."  Trying to format my iomega external HD for use with Mac

    Hi. Trying to connect iomega ext. HD. i have to reformat for Mac. When i plug in & go to Disk Utility,the external shows up and i'm supposed to click "partition". When i do, a box comes up saying ""Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." I quit and relaunched, same results. After googling my question, i came up with this:
    "Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."
    (Quitting and reopening Disk Utility does not help.)
    The following also appears in Console log:
    *** malloc[419]: Deallocation of a pointer not malloced: 0x290a410; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug : for architecture i386 object: ./Applications/iTunes.app/Contents/MacOS/iTunes malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 27 can't byte swap it)
    Workaround
    Quit Disk Utility.
    From the Finder's Go menu, choose Go to Folder....
    Type the following, then click OK: /Library/Receipts
    Temporarily remove these iTunes receipts from /Library/Receipts (sort the folder alphabetically as a list):
    iTunes.pkg
    iTunes4.pkg
    You can put them on the desktop, for example. Do not remove iTunesX.pkg or iTunes Phone Driver.pkg.
    Open Disk Utility and repair disk permissions again.
    Quit Disk Utility.
    Put the removed iTunes receipts back in /Library/Receipts.
    Note: This issue does not affect Disk Utility's verify or repair disk features.
    All seemed good, for a moment, until, upon going back to Disk Utility after removing itunes4.pkg and putting on desktop (i did not have itunes.pkg to remove) the same thing was happening. When i highlite my iomega ext. on left of page, disk perrmissions is grayed and does not allow me to click on it. Same problem from the start. Can somebody please help me out here? That would soooo awesome. Thanx!

    i'm just scared i will do something wrong on my own and lose my data.
    You shouldn't be scared of that, because you should already have backups. If you don't have backups, then backing up is the first priority.
    Insert the Snow Leopard DVD and restart. When you hear the chime, hold down the C key and keep holding it until the Apple logo appears on the display. You should now see the language selection screen. Select your language, then choose Utilities > Disk Utility from the menu bar. In the Disk Utility window, select the external drive (not the internal). The drive may already have a data partition, in which case there will be another icon below the drive icon. Choose the drive icon, then select the Partition tab. Create a single partition with the default options (GUID partition table, Mac OS X Extended Journaled).
    When the partitioning is done, select the startup volume on your internal drive in the DU window. Select the Restore tab. Drag the icon of the startup volume to the "Source" field. Then drag the icon of the newly-created volume on the external drive to the "Destination" field. Make sure you have this right. Then click the Restore button, and the data on your startup volume will be copied to the external drive.

  • BBM lost its connection

    Can anyone help with this - I installed the latest update last night which was a long update, probably wouldn't have done it if I knew it was changing everything again. Although I didnt lose anything this time but my BBM is saying it's lost its connection, please wait while the server tries to connect. It hasn't worked since updating, wondering if anyone knows or has encountered this and if there is a fix? I have re-started and still having the same issue.

    Good day
    Welcome too BB forums
    Quick question for are you connected to the Mobile network when this happens or connected to a Wi-Fi network?
    Want to contract me? You can follow me on Twitter @RobGambino
    Be sure to click Like! for those who have helped you.
    Click Accept as Solution for posts that have solved your issue(s)!

  • Xfce4 applications lost its connection to display

    Hi, I was using arch with xfce4 with no problem at  all... but today xfce4 seems to have very strange problems...
    As usual I logged in and give the startx command, well this time xfce starts loading but after this i've only a black screen with mouse pointer....
    I thought it was an X server problem, but blackbox works fine... Then I discovered that xfce is running but not showing anything,  if i tape ALT+F2 xfrun4 starts and I can start any applications I want (as the browser I'm using now) including xfce4 application like xfce4-panel or xfce4-session , that didn't start before as usual...
    So the problem seems to be that the DE can't initialize it's services, but it sounds strange 'cause before I never had any problems, and I don't remember if I upgraded somethingh during laste working session...
    Xorg log in /var/log  seems to be useless, so I post my ~/.xsession-errors:
    bash: no job control in this shell
    /usr/bin/startxfce4: X server already running on display :0
    /etc/xdg/xfce4/xinitrc: line 56: xscreensaver: command not found
    Agent pid 5880
    ** Message: This build doesn't include support for XF86Misc extension
    ** Message: Querying Xkb extension
    ** Message: Xkb extension found
    ** Message: Querying Xkb extension
    ** Message: Xkb extension found
    ** (xfwm4:5892): WARNING **: The display does not support the XComposite extension.
    ** (xfwm4:5892): WARNING **: Compositing manager disabled.
    (Thunar:5893): thunar-vfs-WARNING **: Impossibile connettersi al demone di HAL: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
    (xfdesktop:5894): thunar-vfs-WARNING **: Impossibile connettersi al demone di HAL: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
    The application 'Terminal' lost its connection to the display :0.0;
    most likely the X server was shut down or you killed/destroyed
    the application.
    The application 'xfce4-session' lost its connection to the display :0.0;
    most likely the X server was shut down or you killed/destroyed
    the application.
    The application 'xfwm4' lost its connection to the display :0.0;
    most likely the X server was shut down or you killed/destroyed
    the application.
    The application 'Thunar' lost its connection to the display :0.0;
    most likely the X server was shut down or you killed/destroyed
    the application.
    The application 'xfdesktop' lost its connection to the display :0.0;
    most likely the X server was shut down or you killed/destroyed
    the application.
    (xfce4-panel:5896): libxfcegui4-WARNING **: ICE I/O Error
    (xfce4-panel:5896): libxfcegui4-WARNING **: Disconnected from session manager.
    The application 'xfce4-panel' lost its connection to the display :0.0;
    most likely the X server was shut down or you killed/destroyed
    the application.
    The application 'xfce-mcs-manager' lost its connection to the display :0.0;
    most likely the X server was shut down or you killed/destroyed
    the application.
    alsa: Mixer attach default error: No such device
    The application 'xfce4-menu-plugin' lost its connection to the display :0.0;
    most likely the X server was shut down or you killed/destroyed
    the application.
    Agent pid 5880 killed
    Thanks for answers....
    jacopo
    Last edited by jtheripper (2007-09-17 15:21:26)

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Can flash app work with GigE ethernet Camera?

    Hi there,
    Have anyone have similiar experience work with GigE ethernet camera with flash app? 
    recently need to test high resolution with high fps such as 1600x1200 @60 fps work with flash application or it required to via other C#/delphi/C++ programming to work together?
    In windows xp environment
    all GigE are connected  local , not to internet server.
    this product looks like fit my need :prosilica GX1660
    please be advised,
    Vossler

    The best way you can go in my opinion is developing a java application that connects and controls the camera, then you can use merapi to call java functions
    Merapi is a Java-AS3 bridge (http://merapiproject.net/)

  • Photosmart wireless B110 printer has lost its connection with my desktop PC.

    My Photosmart wireless B110 printer has lost its connection with my desktop PC. I can still print from my laptop so I know the printer is working fine.
    When I check ink levels through 'Printer Proerties' the message I get is 'The computer is unable to establish two-way communication with the device', so I guess this is a clue. I would appreciate any help you can give. 
    THank you.

    Just as a preliminary step, we're going to go through a complete and clean uninstallation and reinstallation. First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer. 
    In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it. 
    Then follow this link to download the full feature software and drivers for the printer (be sure to select your correct OS): 
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4022343
    Install that and let me know the result! 
    Have a great day!

  • Win 7(3) computers has lost its connection

    ok i have a 3 wireless computers one with cat5 the problem  one of the wireless was vista and it was working good antill i upgrade my sistym to win7 and soemtimes i have a good conection  and sometimes i have to restart the wrt600n
    here is what i change i did what  dibbler
    have you tried setting the radio band to standard - 20MHz and the standard channel to '11'?
    but i lost its connection. with 5G here is what i have on both
    5ghz
    netwo mode mixe
    radio ban standard 20mhz channel
    standard channe outos
    ssid broadcast enabled
    2.4ghz
    netwo mode mixe
    radio ban standard 20mhz channel
    standard channe  11-22.4ghz
    ssid broadcast enabled
    only one computer can see the 5ghz  connection
    or do i need a new one i was looking at the one or can any one
    Linksys E4200
    or can someone tell me a good wireless router
    thank you

    Only one computer can see 5 GHz wireless network. That means that computer must be having wireless adapter compatible with 5 GHz wireless band.
    Try changing some advanced wireless settings on the router.
    Open the setup page of the router and go to Wireless tab. Click on Advanced wireless settings sub tab. Chnage the Beacon Interval to 75, RTS and fragmentation threshold to 2304. Save the settings.
    You have upgraded the system to windows 7. Try to update the drivers of the wireless adapter on that computer.
    Did you try to upgrade the firmware on your router? If not then upgrade the firmware on your router and see if that helps you.

  • The bbm error message says: "BBM has lost its connection​. Please wait for my z10

    having bbm issue cannot connect to my bbm messenger on my z10 for more then 30 seconds always having a message saying bbm has lots its connection trying to reconnect to the server please wait while server attemps to reconnect and my cell phone is register under the black berry services .
    I already try to fix issue by changing my sim card and updated my os to a new one but no succes issue came back inside of 24 hours. those solution were not succesful.
    any suggestion are help would be appreciated
    thank you

    Good day
    Welcome too BB forums
    Quick question for are you connected to the Mobile network when this happens or connected to a Wi-Fi network?
    Want to contract me? You can follow me on Twitter @RobGambino
    Be sure to click Like! for those who have helped you.
    Click Accept as Solution for posts that have solved your issue(s)!

  • Lost internet connection while restoring iphone 4S from backup after iOS 6

    Hi everyone..
    I have just updated my iPhone 4S to iOS6 yesterday. It was iOS5.1.1 and was in jailbreak mode before the update.
    I did sync my iphone and did the 'Backup' as well before the update by using my latest iTunes via my laptop.
    The iOS6 update was successful.
    However, the 'Restore from backup' failed.. many times!! Everytime I tried to Restore from backup, i lost internet connection towards the end of the 'restore in progress'  process so it was never complete. I had to pull out the iphone cable or restart my pc every single time that happened. Because i cannot get an internet connection after that happened. I cannot connect to any wireless network, so I had to restart the pc!
    (the iPhone says 'Restore complete' as soon as I pulled out the cable. But phone stays as NEW phone, none of my backup data was restored).
    During the 'restore from backup' attempts (via iTunes 10.7 on laptop), I have tried:
    - Restoring to factory settings first and then restore from backup = tried many times and still failed.
    - Uninstalled Apple mobile device and iTunes and re-installed them = still failed.
    - Switched OFF the phone and hold the Home button while connecting to the laptop. Restored to factory settings, then tried to restore from backup = still failed!!
    - switching to different USB ports on my laptop including USB 2.0 and USB 3.0 = no luck, still failed.
    NOTES:
    -Laptop is on Windows 7 and have had NO such problems so far. I have been using iPhone since 3GS.
    -Internet connection is via wireless router, steady connection.
    -My 3GS was on jailbreak mode before. I bought iPhone 4S and successfully restored from my '3GS backup' without any problem.
    -iTunes 10.7 installed/updated.

    Nevermind.. I just found the solution to my problem.
    I copied the Backup folder into my mate's laptop and did the 'Restore from backup'.
    All is good now.. Only need to re-install my apps, soon after all will be back as per normal!

  • I lost internet connection while entering in an Itunes gift card and now there is no money on my account and it says my card has been used

    I was entering my itunes gift card and after  hit submit I lost internet connection. I never got my giftcard redeemed and now the card wont work. Help please

    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Camera unable to grab while running in 30 fps through ImaqDx driver.

    Hi,
    I am using 3 cameras running on Imaq Dx driver.
    The video mode is 800 X 600 YUV 4:2:2  30fps, speed 800Mbps.
    2 cameras are connected on express 1394b and other is connected to PCI 1394b.
    All 3 cameras are triggered through hardware trigger.
    After some iterations the camera stops transmitting the image 
    Everytime we are finding the problem repeating in camera connected to PCI card other than the camera connected to the Express card.Definitely there is no problem with the PCI card..We had contacted the manufacturer i.e Point Grey,but they are telling the problem is with the Imaqdx driver.So kindly reply us back faster.
    Regards
    Abhishek Verma

    Hello Abhishek,
    This could be due to the Bandwidth limitations in Firewire. I have attached a Firewire Bandwidth Allocation file. Use that and identify how much is the maximum speed you can achieve for your configuration.
    -Sundar
    Attachments:
    firewirebandwidthallocation.xls ‏33 KB

  • Problem of connection while running a program on PXI

    Often, when I use a Labview program running on PXI, I lose the connection with PXI and have to stop my program and reboot PXI.
    It's happens with heavy program using a lot of IO port, but also some very basic and light program. Have you ever had this kind of problem ? Do you think it comes from PXI or from my laptop (which is quite powerfull however), or the cross cable which links both ?
    thanks for your help.

    Hello Foxone,
    Can you please give us more details about your system?
    Which PXI you use? Which devices?
    Do you receive any error message?
    Regards,
    Sanaa T
    National Instruments
    Sanaa T.
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    >> http://www.nidays.fr/images/081110_ban_nidays09_468X60.gif

  • Lost wifi connection while activation so my installation code is already used... what to do?

    Hey there Adobe people!
    I have a question about my installation code of the Creative Cloud membership. I've bought it  at from a site my school suggests. Later when I received the installation code and download link I began with the activation on my Mac.  After the step where I placed my installation code I had to keep my activation of my membership for a longer time. But then my wifi lost connection. I wanted to refresh the page but then the white squares where empty so I had to fill in my installation code again. But it said the code was already used. So I hope you have a solution for this.
    Thank you in advance!
    Simone

    you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Pages has lost its connection to iCloud

    I have a mid 2010 iMac 27" 2.93 Ghz i7 with 8GB of ram.
    When I go to open files from iCloud in Pages (and the other icloud connected apps) the finder window blinks as if trying to connect but then displays my local documents folder. I have repaired permissions, logged out and back into iCloud services to no avail.  I created a new profile on the mac, linked to iCloud services and everything worked fine!. Before I just give up and move all of my files over to a new profile, I was hoping someone out there had a fix for this.
    BTW I have the latest version of Pages and Pages 09 installed same issue with both versions.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Maybe you are looking for