Camera unable to grab while running in 30 fps through ImaqDx driver.

Hi,
I am using 3 cameras running on Imaq Dx driver.
The video mode is 800 X 600 YUV 4:2:2 30fps, speed 800Mbps.
2 cameras are connected on express 1394b and other is connected to PCI 1394b.
All 3 cameras are triggered through hardware trigger.
After some iterations the camera stops transmitting the image
Everytime we are finding the problem repeating in camera connected to PCI card other than the camera connected to the Express card.Definitely there is no problem with the PCI card..We had contacted the manufacturer i.e Point Grey,but they are telling the problem is with the Imaqdx driver.So kindly reply us back faster.
Regards
Abhishek Verma

Hello Abhishek,
This could be due to the Bandwidth limitations in Firewire. I have attached a Firewire Bandwidth Allocation file. Use that and identify how much is the maximum speed you can achieve for your configuration.
-Sundar
Attachments:
firewirebandwidthallocation.xls ‏33 KB

Similar Messages

While running Auto payment program through F110 getting error

Dear Experts,
while running Auto payment through F110 we are getting below error
"F0417 warning: check whether a duplicate payment medium has been created".
I dont have any problem for payment summary and payment advice, issue only for payment voucher.
Would appreciate if you could provide some inputs on this.
Thanks and Regards,
N.C.Reddy

Hi,
I have done some changes configuration in Paying company codes and payment method in company code, the issue has been resolved.
Thanks and Regards,
N.C.Reddy

Gige ethernet camera lost its connection while running

Dear All,
I am using a Gige ethernet camera for triggered acquisition.I need to achieve a network speed of 1Gbps with 9000 maximum packet size for my application. But sometimes this network speed drops down to100Mbps with 1450 packet size due to noise and some other artifacts which leads to lost camera connection from system.To again get camera in connection I need to close the application and restart it .Sometimes I close the application and reconnect the ethernet cable to get camera properly connected with the system.
As I cannot completely get rid of noise and other interefrence I want to connect and configure a disconnected camera in run time.So on error of device connection lost I tried using IMAQdX unconfigure acquisition.vi and IMAQdX configure acquisition.vi but it was of no use.Then I tried to close camera connection first and repeated whole the procedure of opening and configuring the camera but everything done was of no use.
Please suggest me any solution to this problem.
Thank You
Anagha

Hi Anagha.G,
It's not only with ethernet, infact with every other camera/hardware.
Whenever u open a device during starting phase, the labview gets hold of the device driver.
If the device is not properly closed for some reason during some processing, the device handle will be locked and labview will not be able to get hold of device back.
For that to happen, i think the probabilistic solution is only close labview which is using the device and restart the code.
May be try, not only unconfiguring but also close the connection and try reopening during an error and check (may work).
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

Error while running Real Time Job through SOAP UI

Hi Experts,
I am using real time job for search the duplicates in the data base using attribute values. After running the job iam getting correct result in the xml message.
I configured real time job in management console and taking the WSDL and giving the in put in SOAP UI then iam getting the message like this after 2 timedouts.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Sender</faultcode>
<faultstring>Web Services is unable to process the request to call real-time service 'RT_SEARCH' using Access Server 'uplt-abk-052:4000'. Error: Server sent back error: Communication Error. See real time job log for details.</faultstring>
<faultactor/>
<detail/>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
In the real time job log file iam getting the message like this
(12.2) 06-01-10 09:37:41 (E) (0620:2732) Unknown: SP(RT_SEARCH, UPLT-ABK-052:3501)::flowThread() Flow became invalid while waiting for reply from real time job. (BODI-300136)

In Management Console,
PLease take a look at websevices-> partciular JOB-> historyLog-> errorlog and tracelog to see the more details of the error. It should definetly whats the cause of the error.
-Subhadra

Error while running SQL Developer from a network drive.

I get following error when I start SQL Developer from an un-mapped network drive
java.lang.NoClassDefFoundError: oracle/classloader/util/AnnotatedNoClassDefFoundError
     at oracle.dmt.dataminer.mviewer.dtree.DecisionTreeEditorAddin.getEditorWeight(Unknown Source)
     at oracle.ideimpl.editor.EditorAddinRegistry.getAddinsImpl(EditorAddinRegistry.java:182)
     at oracle.ideimpl.editor.EditorAddinRegistry.getAddins(EditorAddinRegistry.java:154)
     at oracle.ideimpl.editor.EditorManagerImpl.getAddins(EditorManagerImpl.java:828)
     at oracle.ideimpl.editor.TabGroupState.loadStateInfo(TabGroupState.java:958)
     at oracle.ideimpl.editor.TabGroup.loadLayout(TabGroup.java:1959)
     at oracle.ideimpl.editor.TabGroupXMLLayoutPersistence.loadComponent(TabGroupXMLLayoutPersistence.java:31)
     at oracle.ideimpl.controls.dockLayout.DockLayoutInfoLeaf.loadLayout(DockLayoutInfoLeaf.java:123)
     at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:631)
     at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:628)
     at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:614)
     at oracle.ideimpl.controls.dockLayout.DockLayout.loadLayout(DockLayout.java:302)
     at oracle.ideimpl.controls.dockLayout.DockLayoutPanel.loadLayout(DockLayoutPanel.java:128)
     at oracle.ideimpl.editor.Desktop.loadLayout(Desktop.java:406)
     at oracle.ideimpl.editor.Desktop.loadLayout(Desktop.java:430)
     at oracle.ideimpl.editor.EditorManagerImpl.init(EditorManagerImpl.java:2022)
     at oracle.ide.layout.Layouts.activate(Layouts.java:814)
     at oracle.ide.layout.Layouts.activateLayout(Layouts.java:195)
     at oracle.ideimpl.MainWindowImpl$6.runImpl(MainWindowImpl.java:728)
     at oracle.javatools.util.SwingClosure$1Closure.run(SwingClosure.java:50)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:199)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Below I am also attaching the long console log if I run
\\mt000xvrpt91\tools\SQLDeveloper\sqldeveloper\bin\sqldeveloper.exe
One thing I noticed in that log is the file path
file:////mt000xvrpt91/tools/SQLDeveloper/ide/extensions/oracle.ide.db.jar
that is wrong it should be file://///mt000xvrpt91/tools/SQLDeveloper/ide/extensions/oracle.ide.db.jar
ie, 5 "/" after "file:" instead of 4 "/"
If I run SQL developer after Mapping the network drive to "S" I get following.
S:\SQLDeveloper\sqldeveloper\bin>sqldeveloper
Registered TimesTen
log4j:ERROR setFile(null,true) call failed.
java.io.FileNotFoundException: S:\SQLDeveloper\sqldeveloper\extensions\oracle.datamodeler\log\datamodeler.log (Access is denied)
at java.io.FileOutputStream.openAppend(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:177)
at java.io.FileOutputStream.<init>(FileOutputStream.java:102)
at org.apache.log4j.FileAppender.setFile(FileAppender.java:273)
at org.apache.log4j.RollingFileAppender.setFile(RollingFileAppender.java:156)
at org.apache.log4j.FileAppender.activateOptions(FileAppender.java:152)
at org.apache.log4j.config.PropertySetter.activate(PropertySetter.java:247)
at org.apache.log4j.xml.DOMConfigurator.parseAppender(DOMConfigurator.java:210)
at org.apache.log4j.xml.DOMConfigurator.findAppenderByName(DOMConfigurator.java:140)
at org.apache.log4j.xml.DOMConfigurator.findAppenderByReference(DOMConfigurator.java:153)
at org.apache.log4j.xml.DOMConfigurator.parseChildrenOfLoggerElement(DOMConfigurator.java:415)
at org.apache.log4j.xml.DOMConfigurator.parseRoot(DOMConfigurator.java:384)
at org.apache.log4j.xml.DOMConfigurator.parse(DOMConfigurator.java:783)
at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:666)
at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:616)
at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:602)
at org.apache.log4j.helpers.OptionConverter.selectAndConfigure(OptionConverter.java:460)
at org.apache.log4j.LogManager.<clinit>(LogManager.java:113)
at org.apache.log4j.xml.DOMConfigurator.configure(DOMConfigurator.java:697)
at oracle.dbtools.crest.util.logging.Logger.init(Unknown Source)
at oracle.dbtools.crest.util.logging.Logger.<init>(Unknown Source)
at oracle.dbtools.crest.fcp.DataModelerAddin.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:247)
at oracle.ideimpl.extension.AddinManagerImpl.createAddin(AddinManagerImpl.java:433)
at oracle.ideimpl.extension.AddinManagerImpl.initializeAddins(AddinManagerImpl.java:212)
at oracle.ideimpl.extension.AddinManagerImpl.initProductAndUserAddins(AddinManagerImpl.java:128)
at oracle.ide.IdeCore.initProductAndUserAddins(IdeCore.java:1949)
at oracle.ide.IdeCore.startupImpl(IdeCore.java:1573)
at oracle.ide.Ide.startup(Ide.java:703)
at oracle.ideimpl.DefaultIdeStarter.startIde(DefaultIdeStarter.java:35)
at oracle.ideimpl.Main.start(Main.java:184)
at oracle.ideimpl.Main.main(Main.java:146)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.PCLMain.callMain(PCLMain.java:62)
at oracle.ide.boot.PCLMain.main(PCLMain.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.classloader.util.MainClass.invoke(MainClass.java:128)
at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:189)
at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:89)
at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:65)
at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.Launcher.invokeMain(Launcher.java:713)
at oracle.ide.boot.Launcher.launchImpl(Launcher.java:115)
at oracle.ide.boot.Launcher.launch(Launcher.java:68)
at oracle.ide.boot.Launcher.main(Launcher.java:57)
log4j:ERROR setFile(null,true) call failed.
java.io.FileNotFoundException: S:\SQLDeveloper\sqldeveloper\extensions\oracle.datamodeler\log\datamodeler.log (Access is denied)
at java.io.FileOutputStream.openAppend(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:177)
at java.io.FileOutputStream.<init>(FileOutputStream.java:102)
at org.apache.log4j.FileAppender.setFile(FileAppender.java:273)
at org.apache.log4j.RollingFileAppender.setFile(RollingFileAppender.java:156)
at org.apache.log4j.FileAppender.activateOptions(FileAppender.java:152)
at org.apache.log4j.config.PropertySetter.activate(PropertySetter.java:247)
at org.apache.log4j.xml.DOMConfigurator.parseAppender(DOMConfigurator.java:210)
at org.apache.log4j.xml.DOMConfigurator.findAppenderByName(DOMConfigurator.java:140)
at org.apache.log4j.xml.DOMConfigurator.findAppenderByReference(DOMConfigurator.java:153)
at org.apache.log4j.xml.DOMConfigurator.parseChildrenOfLoggerElement(DOMConfigurator.java:415)
at org.apache.log4j.xml.DOMConfigurator.parseRoot(DOMConfigurator.java:384)
at org.apache.log4j.xml.DOMConfigurator.parse(DOMConfigurator.java:783)
at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:666)
at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:616)
at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:602)
at org.apache.log4j.xml.DOMConfigurator.configure(DOMConfigurator.java:697)
at oracle.dbtools.crest.util.logging.Logger.init(Unknown Source)
at oracle.dbtools.crest.util.logging.Logger.<init>(Unknown Source)
at oracle.dbtools.crest.fcp.DataModelerAddin.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:247)
at oracle.ideimpl.extension.AddinManagerImpl.createAddin(AddinManagerImpl.java:433)
at oracle.ideimpl.extension.AddinManagerImpl.initializeAddins(AddinManagerImpl.java:212)
at oracle.ideimpl.extension.AddinManagerImpl.initProductAndUserAddins(AddinManagerImpl.java:128)
at oracle.ide.IdeCore.initProductAndUserAddins(IdeCore.java:1949)
at oracle.ide.IdeCore.startupImpl(IdeCore.java:1573)
at oracle.ide.Ide.startup(Ide.java:703)
at oracle.ideimpl.DefaultIdeStarter.startIde(DefaultIdeStarter.java:35)
at oracle.ideimpl.Main.start(Main.java:184)
at oracle.ideimpl.Main.main(Main.java:146)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.PCLMain.callMain(PCLMain.java:62)
at oracle.ide.boot.PCLMain.main(PCLMain.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.classloader.util.MainClass.invoke(MainClass.java:128)
at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:189)
at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:89)
at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:65)
at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.Launcher.invokeMain(Launcher.java:713)
at oracle.ide.boot.Launcher.launchImpl(Launcher.java:115)
at oracle.ide.boot.Launcher.launch(Launcher.java:68)
at oracle.ide.boot.Launcher.main(Launcher.java:57)
===================================================================
Console Log if I run
\\mt000xvrpt91\tools\SQLDeveloper\sqldeveloper\bin\sqldeveloper.exe
========================================================================
Mar 30, 2011 4:36:37 PM javax.ide.extension.spi.DefaultElementContext getMacroValue
SEVERE: jar:/file:////mt000xvrpt91/tools/SQLDeveloper/ide/extensions/oracle.ide.db.jar!/META-INF/extension.xml:22: Unable to find resource bundle class: oracle.ideimpl.db.resource.UIBundle
Mar 30, 2011 4:36:37 PM javax.ide.extension.spi.DefaultElementContext getMacroValue
SEVERE: jar:/file:////mt000xvrpt91/tools/SQLDeveloper/ide/extensions/oracle.ide.db.jar!/META-INF/extension.xml:23: Unable to find resource bundle class: oracle.ideimpl.db.resource.UIBundle
Mar 30, 2011 4:36:37 PM javax.ide.extension.spi.DefaultElementContext getMacroValue
SEVERE: jar:/file:////mt000xvrpt91/tools/SQLDeveloper/ide/extensions/oracle.ide.db.jar!/META-INF/extension.xml:26: Unable to find resource bundle class: oracle.ideimpl.db.resource.UIBundle
Mar 30, 2011 4:36:37 PM javax.ide.extension.spi.DefaultElementContext getMacroValue
SEVERE: jar:/file:////mt000xvrpt91/tools/SQLDeveloper/ide/extensions/oracle.ide.db.jar!/META-INF/extension.xml:26: Unable to find resource bundle class: oracle.ideimpl.db.resource.UIBundle
Mar 30, 2011 4:36:37 PM javax.ide.extension.spi.DefaultElementContext getMacroValue
SEVERE: jar:/file:////mt000xvrpt91/tools/SQLDeveloper/ide/extensions/oracle.ide.db.jar!/META-INF/extension.xml:43: Unable to find resource bundle class: oracle.ideimpl.db.resource.UIBundle
Mar 30, 2011 4:36:37 PM javax.ide.extension.spi.DefaultElementContext getMacroValue
SEVERE: jar:/file:////mt000xvrpt91/tools/SQLDeveloper/ide/extensions/oracle.ide.db.jar!/META-INF/extension.xml:46: Unable to find resource bundle class: oracle.ideimpl.db.resource.UIBundle
Mar 30, 2011 4:36:37 PM javax.ide.extension.spi.DefaultElementContext getMacroValue
SEVERE: jar:/file:////mt000xvrpt91/tools/SQLDeveloper/ide/extensions/oracle.ide.db.jar!/META-INF/extension.xml:50: Unable to find resource bundle class: oracle.ideimpl.db.resource.UIBundle
Mar 30, 2011 4:36:38 PM javax.ide.extension.spi.SAXManifestParser$Handler endElement
SEVERE: jar:/file:////mt000xvrpt91/tools/SQLDeveloper/sqldeveloper/extensions/oracle.sqldeveloper.jar!/META-INF/extension.xml:316: Exception processing manifest: oracle.classloader.util.AnnotatedNoClassDefFoundError:
Missing class: oracle.dbtools.raptor.controls.grid.IRaptorGridModel
Dependent class: oracle.dbtools.raptor.controls.grid.IResultSetTableModel
Loader: ide-global:11.1.1.0.0
Code-Source: //mt000xvrpt91/tools/SQLDeveloper/sqldeveloper/extensions/oracle.sqldeveloper.jar
Configuration: extension jar in \\mt000xvrpt91\tools\SQLDeveloper\sqldeveloper\extensions
The missing class is not available from any code-source or loader in the system.
oracle.classloader.util.AnnotatedNoClassDefFoundError:
Missing class: oracle.dbtools.raptor.controls.grid.IRaptorGridModel
Dependent class: oracle.dbtools.raptor.controls.grid.IResultSetTableModel
Loader: ide-global:11.1.1.0.0
Code-Source: //mt000xvrpt91/tools/SQLDeveloper/sqldeveloper/extensions/oracle.sqldeveloper.jar
Configuration: extension jar in \\mt000xvrpt91\tools\SQLDeveloper\sqldeveloper\extensions
The missing class is not available from any code-source or loader in the system.
at oracle.classloader.PolicyClassLoader.defineClass(PolicyClassLoader.java:2387)
at oracle.classloader.PolicyClassLoader.findLocalClass(PolicyClassLoader.java:1546)
at oracle.classloader.SearchPolicy$FindLocal.getClass(SearchPolicy.java:226)
at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1728)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1689)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1674)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:621)
at oracle.classloader.PolicyClassLoader.defineClass(PolicyClassLoader.java:2364)
at oracle.classloader.PolicyClassLoader.findLocalClass(PolicyClassLoader.java:1546)
at oracle.classloader.SearchPolicy$FindLocal.getClass(SearchPolicy.java:226)
at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1728)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1689)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1674)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:621)
at oracle.classloader.PolicyClassLoader.defineClass(PolicyClassLoader.java:2364)
at oracle.classloader.PolicyClassLoader.findLocalClass(PolicyClassLoader.java:1546)
at oracle.classloader.SearchPolicy$FindLocal.getClass(SearchPolicy.java:226)
at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1728)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1689)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1674)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at oracle.dbtools.raptor.controls.grid.RSTModelHook$ProviderChildVisitor.end(RSTModelHook.java:64)
at javax.ide.extension.spi.SAXManifestParser$Handler.endElement(SAXManifestParser.java:138)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1359)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:376)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:322)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:226)
at javax.ide.extension.spi.SAXManifestParser.parse(SAXManifestParser.java:87)
at javax.ide.extension.spi.SAXManifestParser.parse(SAXManifestParser.java:57)
at javax.ide.extension.ExtensionRegistry.loadExtension(ExtensionRegistry.java:295)
at oracle.ideimpl.extension.ExtensionManagerImpl.loadExtension(ExtensionManagerImpl.java:701)
at javax.ide.extension.ExtensionRegistry.loadExtensions(ExtensionRegistry.java:275)
at oracle.ideimpl.extension.ExtensionManagerImpl.loadExtensions(ExtensionManagerImpl.java:612)
at javax.ide.extension.ExtensionRegistry.loadExtensions(ExtensionRegistry.java:171)
at oracle.ideimpl.extension.ExtensionManagerImpl.loadExtensions(ExtensionManagerImpl.java:510)
at javax.ide.extension.ExtensionRegistry.initialize(ExtensionRegistry.java:381)
at oracle.ideimpl.extension.ExtensionManagerImpl.initialize(ExtensionManagerImpl.java:954)
at javax.ide.Service.getService(Service.java:68)
at javax.ide.extension.ExtensionRegistry.getExtensionRegistry(ExtensionRegistry.java:400)
at oracle.ide.ExtensionRegistry.getExtensionRegistry(ExtensionRegistry.java:191)
at oracle.ide.IdeCore.startupImpl(IdeCore.java:1384)
at oracle.ide.Ide.startup(Ide.java:703)
at oracle.ideimpl.DefaultIdeStarter.startIde(DefaultIdeStarter.java:35)
at oracle.ideimpl.Main.start(Main.java:184)
at oracle.ideimpl.Main.main(Main.java:146)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.PCLMain.callMain(PCLMain.java:62)
at oracle.ide.boot.PCLMain.main(PCLMain.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.classloader.util.MainClass.invoke(MainClass.java:128)
at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:189)
at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:89)
at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:65)
at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.Launcher.invokeMain(Launcher.java:713)
at oracle.ide.boot.Launcher.launchImpl(Launcher.java:115)
at oracle.ide.boot.Launcher.launch(Launcher.java:68)
at oracle.ide.boot.Launcher.main(Launcher.java:57)
And more........... I exceeded 30000 character limit at this form

I am OK to ignore the error. But better option will be SQL Developer take care of this situation.
My intention is to keep SQL Developer on a readonly share folder and send the path to end users.
Ideally I wish I could use UNC path so that I dont have to worry about the drive mapping.

Facing Issue while running from on desktop through oracle form builder 10g.

Dear All,
I am facing No plugin to show content error while trying to run oracle from on desktop through form builder 10g. please help.
Thanks,
Pradeep

I am facing No plugin to show content error while trying to run oracle from on desktop through form builder 10g. What is your OS version?
What Java version are you using?
Have you configured your Oracle Developer Suite (ODS) 10g to run forms from the Forms Builder?
Craig...

Unable to deploy and run WD Java app through NWDS with a remote J2ee engine

Hi ,
We have a clustered server instance configuration in our environment.
I have already added the message server port and the server details in the remote J2ee engine configuration in NWDS through windows->preferences .
I found the port no. and the host server name using <servername>:<portname>sap/monitor/systeminfo
Also, I can see the SDM , dispatcher and the server running/shown in green in the J2ee engine setting.
But when I was trying to connect deploy and run the application, first it asks for the SDM password and after entering it , it aborts with the following message :
Sep 18, 2007 8:32:15 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : XXX00
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/check1/LOCALS~1/Temp/temp11565my_pro.ear
Deployment exception : Server XXX00 did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server XXX00 at port 50018: Connection timed out: connect
Inner exception was :
Server XXX00 did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server XXX00 at port 50018: Connection timed out: connect
Can anyone let me know what can be the reason.
Best Regards
Sid

Hi Siddharth,
Re-start SDM process of J2EE engine.Make sure when you are deploying u r project others are not deploying their project.
SAP Note : <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_jas/~form/handler">701654</a>
Regards,
Mithu

Issues while running a WebDynpro Application through portal.

Hi,
I am trying to execute a webdynpro application through portal and facing some issues. I hope to get a significant help from the experts:
> Initially, a report is called from the portal which in turns calls the WebDynpro Application.
> After this, I am again trigerring "FIRE" event in order to go back to report.
At this step, portal shows a message "The Page Can Not be Displayed". Browser link field contains the event name which I am passing to the Fire Event.
Can anybody let me know the root cause for this issue? Below is the piece of code that I am using for navigating from Webdynpro to Report.
        l_sapgui_manager->fire(
          EXPORTING
            name = 'INDI'
        parameters = lt_parameters ).
lt_parameters contains some field values which are required in the report.
Thanks,
Ashish

No Solution

When I download an app while running iTunes from an external hard drive, the app is automatically saved to the my music folder on my desktop.

Also, when I move an updated app from the my music folder to the external hard drive, it no longer automatically deletes the old version of the app in the folder.

Hi, I was waiting for somebody with experience to pipe in, but as I understand it it'll be that way for upto 5 users if your Sharing iTunes.

Error while running my javascript file

I got javascript error while running my script file through visual basic. But i did not get error if i run the script strightly through script folder. Kindly advice me how to solve it

Photoshop Scripting Forum http://www.adobeforums.com/webx?13@@.3bbf2765

Trouble with running form on web through form builder

Can anyone help me? I have research every document, talked with metalink and have checked everything. I cannot find the problem.
While running form on web through form builder, receive error FRM-92100 Connection to server was interrupted. I have checked details and receive java exception java.lang.ArrayIndexOutofBoundsException:256. Not sure this means anything but adding it just in case.
I am running Forms 6i, version 6.0.8.20.1 Loaded forms from CD which did not include the WEBDB listener, so loaded listener seperately. Loaded database version 8.1.7 with apache server.
Information in my httpd.conf file shows servername myserver.domain, port 80 and listen 80.
Information in my formsweb.cgf file shows serverport 9000 connectmode:socket
What else should I check? What is set wrong? All services up and running.
Can anyone help?

Toni,
try the following
from the orant/bin directory type the following
ifweb60 <modulename> <userid>
make sure that the Forms module to start is in the Forms60_Path and can be found.
If all works well then this should start teh Appletviewer showing the Forms you request
to run.
Hope that I am not misunderstanding you and you are looking for starting Forms from the Forms developer by clicking on the preview button in the toolbar. If you are looking for Web deploying Forms applications, requesting it from a Browser, then the configuration is different.
Frank

Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.

Hi, We recently started getting these errors a couple times a day. There are 12 of them in total. We also have exactly 12 subscriptions. Does this indicate some db issue causing all of these
to fail?
Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
The following error(s) were encountered:
Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
One or more workflows were affected by this.
Workflow name: Subscription8b108a3e_4e3d_4fd0_b67e_cbfc21cd10b8
Instance name: Alert Notification Subscription Server
Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
Management group: A Company Management Group
Thanks Lance

Hi,
Do you have hotfixes applied?
http://blogs.technet.com/kevinholman/archive/2009/01/27/which-hotfixes-should-i-apply.aspx
Also, I found a relevant thread for your reference.
Alert subscription data source module encountered errors while running</u1:p>
http://social.technet.microsoft.com/Forums/systemcenter/en-US/50557249-7f97-4b67-9729-f7088202385b/alert-subscription-data-source-module-encountered-errors-while-running?forum=operationsmanagergeneral</u1:p>
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

IPhoto suddenly quit while importing photos from camera unable to import photos from camera

iPhoto suddenly quit while importing photos from camera unable to import photos from camera that were imported before iPhoto quit. Photos are still on the camera however iPhoto only "sees" the photos that were not imported on this computer. I can connect to my other mac and see all the photos. This has happened before and I wanted to learn how to deal with this problem. Thanks Ed

I am using a MacBook Pro OS 10.9.2, iPhoto 9.5.1 connected via usb to a Canon G12. I have had this issue before when importing photos. I can work around by using my other Mac and download the photos. I believe that there maybe a setting on the Mac that prevents duplicating photo downloads that may be preventing me from seeing these photos stored in the camera memory although I can view them on the camera.

I have Os Lion on my mac book pro, im not a fan of this because i cant run many games, i have the disk for snow leopard my machine came with but i get a error saying "unable to unmount disc" when i try erase my hard drive i just want OS SL back any help?

I have Os Lion on my mac book pro, im not a fan of this because i cant run many games, i have the disk for snow leopard my machine came with but i get a error saying "unable to unmount disc" when i try erase my hard drive i just want OS SL back any help?
many thanks Carl.

You must boot from another drive in order to erase the system drive.
Try starting up with Snow Leopard DVD inserted and C depress. That should get you booted from the DVD. Then start Disk Utitlity from DVD and erase the disk then you should be able to install Snow Leopard.
Remember that everything will be removed from the disk when you erase it and install Snow Leopard so backup first.
Allan

My Mac G4 came unplugged while running and now when I start it up all I get is a continuous reboot loop.

While sliding my Mac G4 tower out from under the desk it came unplugged. It was running at the time. After plugging it back in all I get is a continuous reboot loop. I have tried the Shift and the Command Option P R boots to no avail. What am I missing here? I have had no problems in the past with this system. I am running Panther.

I have tried the Shift and the Command Option P R boots to no avail.
Are you using an Apple keyboard or something else. It is rather common for non-Apple boards, especially those pulled from a PC, to not respond to the traditional Apple startup key command combos.
Take the computer off wall power again then press and hold the power button for about 20 seconds. Then restore power and try a normal start. That worked for me when I had a similar failure to start with my G4 MDD.
If you have never replaced the internal backup battery ("PRAM" battery) it is, by, now surely extremely dead and it could not preserve the needed start parameters when power was unexpectedly cut. If you get the computer going, consider installing a new PRAM battery so you won't replay today's issues. tomorrow. The batteries are cheap and replacing one is a three-minute at-home job:
NewerTech 3.6v Lithium 1/2 AA PRAM Computer Clock Battery

Camera unable to grab while running in 30 fps through ImaqDx driver.

Similar Messages

Maybe you are looking for