Give me detail functions use boolean function, use detail

give me detail functions use boolean function, use detail func in calculated key figure

Hi,
Adding to that some more few links which helps you are
Defining Formulas:[http://help.sap.com/saphelp_nw70/helpdata/EN/71/0aec3b6e011341e10000000a114084/content.htm]
Percentage Functions:[http://help.sap.com/saphelp_nw70/helpdata/EN/e2/16f13a2f160f28e10000000a114084/content.htm]
Data Functions:[http://help.sap.com/saphelp_nw70/helpdata/EN/e2/16f13a2f160f28e10000000a114084/content.htm]
Boolean Operators:[http://help.sap.com/saphelp_nw70/helpdata/EN/23/17f13a2f160f28e10000000a114084/content.htm]
Technicle Notes About Formula Operators:[http://help.sap.com/saphelp_nw70/helpdata/EN/37/b4393ccab19b57e10000000a114084/content.htm]
Defining Restricted Key Figures :[http://help.sap.com/saphelp_nw70/helpdata/EN/61/d0b143aa26b849b4e79a859ea1d7d1/content.htm]
Defining Calculated Key Figures :[http://help.sap.com/saphelp_nw70/helpdata/EN/13/e072abaddb574284d22361f0b824bf/content.htm]
[http://help.sap.com/saphelp_nw70/helpdata/EN/d3/8057f830a911d4b2be0050dadfb23f/content.htm]
[http://help.sap.com/saphelp_nw70/helpdata/EN/d7/c70540ba5ee569e10000000a155106/content.htm]
Regards,
Rajkandula

Similar Messages

GIVE ME DETAILS FUNCTION ON T CODE RSRV DETAILS

GIVE ME DETAILS FUNCTION ON T CODE RSRV DETAILS

Hi,
RSRV is a diagnostic tool in BW, System will automatically corrects if there are any inconsistancies with the BW objects
It is used for Analysis and Repair purpose of BW objects like:
1. Master Data Consistency Checks
2. Transaction Data Consistency Checks
3. Size of Dimensio tables
4. Checking SID values
5. PSA duplicate record check
6. Checking Aggregates
7. Partitions of Info cuses etc...
You can check everything.
Just expand it > drag n drop the required test to the right panel and give the object > execute.
Transaction RSRV: BI Data and Metadata Test and Repair Environment.
Transaction RSRV checks the consistency of data stored in BI. It mostly examines the foreign key relationships between individual tables in the enhanced star schema of the BI system.
The transaction interface was re-designed for SAP BW release 3.0A. The following provides an introduction to running the transaction.
Starting the Transaction
You can reach the test and repair environment:
by entering the transaction code RSRV
in the SAP Easy Access Menu under SAP Menu -> Administration -> Analysis Tool>/>
from InfoObject maintenance (transaction RSD1)
from transaction RSD1 by choosing Analyze from the initial screen.
in the maintenance screen for a characteristic by choosing Edit -> Analyze InfoObject from the main menu.
The Initial Screen
When using the test and repair environment for the first time, the message "Values were not found for all setting parameters" draws your attention to the fact that there are not any saved settings for your user.
After confirming the dialog box, you reach the initial screen of the transaction. This is divided into two parts:
1. On the left-hand side, you can see a tree structure with the pool of available tests.
2. The right-hand side is empty at first. The tests you have selected will be put here. A selection of tests is called a Test Package here.
Combined and Elementary Tests
An Elementary Test is a test that cannot be divided into smaller tests and can therefore only be executed as a whole (or not at all).
In this regard, a Combined Test determines which elementary tests are to be executed after entering the parameters. You can remove individual elementary tests from the test package before carrying out the actual test run, in order to reduce run time, for example.
Combining a Test Package and Executing it.
Firstly select one or more tests with drag&drop or by double-clicking. Each selected test appears as a closed folder in the view of your test package. (An exception is elementary tests without parameters: These do not appear as a folder). You can also drag a whole folder of tests from the test pool across to the right-hand screen area; all tests that are located in the hierarchical structure under this folder are then added to the test package. You can also display a short description of the test, if required. Do this right-clicking on a test and choosing "Description" from the context menu.
Afterwards, you must supply the tests with parameters. Tests without parameters must not be given parameters. You are given notification of this when selecting them. You can enter parameters by double-clicking on a test (test package) or by opening a test folder.
A popup appears in which you have to enter the required parameter values. Often, there is value help available. After the parameters are entered, a folder with the name Parameter is added under the test. This contains the parameter values. The test name can change in some circumstances, enabling you to see at first glance for which parameter values the test is to be executed. It is possible, and often useful, to select the same test several times and give it different parameters. When you have supplied the combined test with parameters, the folder with the name Elementary Tests is added under this one. It contains the elementary tests from which the combined test is built. You can delete individual elementary tests in the test pool using drag&drop.
After supplying all tests with parameters, you can start the test run by clicking on the Execution button. After execution, the test icons change from a gray rhombus to a red, yellow or green one, depending on whether the test had errors, warnings or was error-free.
Test Results
The test results are written to the application log. Depending on the settings, the system jumps automatically to this display, or you can reach it by clicking on the Display button. The results are saved in the database, and can therefore be compared later with additional test runs.
In the left-hand side of the window, you can see an overview of the most recent test runs. Double-clicking on a folder displays all messages under these nodes as a flat (non-hierarchical) list in the right-hand screen area. Long texts or detail data may be available for individual messages, which can be displayed with a mouse click.
Repairs
Some tests can repair inconsistencies and errors. Automatic correction is generally not possible: If entries are missing from the SID table for a characteristic, in which case the lost SIDs are still being used in a dimension table (and the corresponding dimension keys are still being used in the fact table) of an InfoCube, you can only remove the inconsistency by reloading the transaction data of the InfoCube. Also note that you must make repairs in the correct sequence. You must always read the documentation for the test and have a good idea about how the error occured, before making the repairs.
After executing the test run, go from the application log back to the initial screen to make these repairs. Click on the Fix Errors button to start an error run. Since the dataset could have changed between the test and the repair run, the required tests are executed again before the actual repair. The results can be found in the application log once again.
After a repair, the test package should be executed again in order to check that the error has been fixed.
Test Packages
The test package is deleted if you do not save the test package in the display before leaving the test environment. Choose Test Package -> Save Test Package from the main menu. You can do the following from options in the Test Package menu:
Load packages; locks are not set for the package; it can only be saved under different names.
Load for processing - the package is then locked against changes by others - and you can save the package again under a different name.
Delete and
Schedule execution at a later date or at regular intervals in background processing.
Note that the execution of test packages can be integrated in process chains. See below for how you do this.
Settings
In the Settings menu option, you can make user-specific settings (adjust the size of the screen areas, for example) and save them. These settings are read automatically when starting the test environment. Additional settings options are being delivered with support packages since the test environment is currently still under development. A message notifies the user at the start if there aren't any values for the setting options.
Jobs Menu Option
You can access the job overview via the Jobs -> Job Overview menu. Use this when you want to check the status of a test package you have scheduled.
Application Log Menu Option
You can display old logs from previous test runs in the dialog box, as well as scheduled ones. The option of deleting test logs can also be found here.
New Selection
The currently selected test package is deleted using the New Selection function (from the memory, though not from the database if the test package had already been saved).
Filter
Use Filter to delete all elementary tests without errors or warnings from the test package after a test run.
Executing Test Packages in Process Chains
In process chain maintenance, transaction RSPC, add your process chain to ABAP program RSRV_JOB_RUNNER. (To do this, in the process type view under General Services, choose the ABAP Program process type by Drag&Drop. When you maintain the process variants, you are asked to specify the program name and a program variant. Enter RSRV_JOB_RUNNER as the name of the program. Choose a program variant name and then Change. On the next screen, you can change or display already existing variants and create new variants. When creating a new variant you are asked to specify the package name (value help is available), the level of detail for the log (to which the RSRV log is to be integrated in the process chain log), and a message type that signifies process chain processing is to be terminated.
The RSRV processes log in the process chain is structured as follows:
It starts with a summary of any errors or warnings that have been produced for each elementary test.
It finishes with a view of the log from the RSRV test package, up to and including the specified level of detail.
Example: If you choose 3 as the level of detail, only messages at levels up to 3 are included in the Process Chain log. Messages produced for a more detailed level of the test package when it is tested are not displayed in this log. Note that, in contrast to the application log, errors are not passed from more to less detailed levels in the process log. For example, if a single error is produced at level 4, the initial summary reports that the test has produceded an error, but this error is not listed in the second part of the log.
A complete log is always written, independently of the log for the RSRV process in the process chain. You can view this log from the menu option Application Log -> Display Log -> From Batch.
Note that there are currently no transport objects for test packages, meaning that these cannot be transported. Process chains that execute RSRV test packages have to be postprocessed manually after being transported into another system: You have to create the corresponding test packages.
on RSRV
Thanks,
JituK

Give me details about rule details functions conversion, currency etc in bi

give me details about rule details functions conversion, currency etc in bi when creating transformation

Rule Type
Use
The rule type determines whether and how a characteristic or key figure, or a data field or key field is updated into the target.
Direct Assignment:
The field is filled directly from the selected source InfoObject. If the system does not propose a source InfoObject, you can assign a source InfoObject of the same type (amount, number, integer, quantity, float, time) or you can create a routine.
If you assign a source InfoObject to a target InfoObject that has the same type but a different currency, you have to translate the source currency into the target currency using a currency translation, or apply the source currency.
If you assign a source InfoObject to a target InfoObject that has the same type but a different unit of measure, you have to convert the source unit of measure into the target unit of measure using a unit of measure conversion, or apply the unit of measure from the source.
Constant:
The field is not filled by the InfoObject; it is filled directly with the value specified.
Formula:
The InfoObject is updated with a value determined using a formula.
Read Master Data:
The InfoObject is updated by reading the master data table of a characteristic that is included in the source with a key and a value and that contains the corresponding InfoObject as an attribute. The attributes and their values are read using the key and are then returned.
The Financial Management Area characteristic is included in the target but does not exist in the source as a characteristic. However, the source contains a characteristic (cost center, for example) that has the Financial Management Area characteristic as an attribute. You can read the Financial Management Area attribute from the master data table and use it to fill the Financial Management Area characteristic in the target.
It is not possible to read recursively, that is, to read additional attributes for the attribute. To do this, you have to use routines.
If you have changed master data, you have to execute the change run. By reading the master data, the active version is read. If this is not available, an error occurs.
If the attribute is time dependent, you also have to define when it should be read: at the current date (sy-date), at the beginning or end of a period (defined by a time characteristic in the InfoSource), or at a constant date that you enter directly. Sy-date is used as the default.
Routine:
The field is filled by the transformation routine you have written.
The system allows you to select whether the routine is to be valid for all attributes for this characteristic, or only for the attributes displayed.
Transformation rules generally only have one return value. If you select Return Table, the corresponding key figure routine no longer has a return value; it has a return table. You can then generate any number of values from a data record.
For DataStore objects and InfoObjects: you cannot use the return code in the routine for data fields that are updated by being overwritten. If you do not want to update specific records, you can delete these from the start routine.
If, for the same characteristic, you generate different rules for different key figures or data fields, a separate data record can be created for each key figure from a data record of the source.
With InfoCubes: You can also select Routine with Unit. The return parameter 'UNIT' is then also added to the routine. You can store the required unit of the key figure, such as 'ST', in this parameter. You can use this option, for example, to convert the unit KG in the source, into tons in the target.
If you fill the target key figure from a transformation routine, currency translation has to be performed using the transformation routine. This means that automatic calculation is not possible.
Time Update:
When performing a time update, automatic time conversion and time distribution are available.
Direct Update: the system automatically performs a time conversion.
Time Conversion:
You can update source time characteristics to target time characteristics using automatic time conversion. This function is not available for DataStore objects, since time characteristics are treated as normal data fields. The system only displays the time characteristics for which an automatic time conversion routine exists.
Time Distribution:
You can update time characteristics with time distribution. All the key figures that can be added are split into correspondingly smaller units of time. If the source contains a time characteristic (such as 0CALMONTH) that is not as precise as a time characteristic of the target (such as 0CALWEEK), you can combine these characteristics with one another in the rule. The system then performs time distribution in the transformation.
The time distribution is always applied to all key figures.
Initial:
The field is not filled. It remains empty.
No Transformation:
The key figures are not written to the InfoProvider.
Unit of Measure Conversion and Currency Translation
You can convert data records into the unit of measure or currency in the target transformation.
Assigning InfoObjects for Converting Amounts or Currencies
Use
An InfoObject has to be assigned to a source field of a DataSource if currencies or units of measure need to be converted. The translation types require InfoObjects as input fields to carry out a conversion. You therefore have to assign the appropriate InfoObject to the source field.
If the target has a fixed unit, you only have to assign an InfoObject if you want to carry out a conversion. Otherwise, you can select the No Conversion option.
Procedure
1.      You are in the rule details. Select the rule type Direct Assignment.
2.      Select an appropriate key figure in the InfoObject Assignment field in the Source Fields of Rule area.
3.      Choose the required conversion in the Currency field.
4.      Choose Transfer Values.
Example
In your transformation, you want to assign the AMOUNT field of the DataSource to the FIX_EUR InfoObject in your target, carrying out a currency conversion. To do so, you assign the FIX_EUR InfoObject to the AMOUNT field in the rule details so that the currency can be read from the InfoObject.
Hope this helps u...
Regards,
KK.

Give me details about customer exit, sap exit using characterstics variabl

give me details about customer exit, sap exit using characterstics variable

Hi,
Customer Exit:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a56f5e09411d2acb90000e829fbfe/content.htm
SAP Exit:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a56f5e09411d2acb90000e829fbfe/frameset.htm
Characteristic Variables:
http://help.sap.com/saphelp_nw04/helpdata/en/5c/8db07d555411d189660000e829fbbd/frameset.htm
SAP and Customer Exit:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
Some Imp Docs:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/650ee690-0201-0010-4bb7-83c3e2a74039
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/009819ab-c96e-2910-bbb2-c85f7bdec04a
Assign points if these are helpful.
Rgs,
I.R.K

Server Groups - "Give Preference" vs "Only Use"

Hi All,
I'm working on a project where we want to have batches of reports being scheduled to specific server groups. Currently when these batches are run, the reports use the "first available server" option in CMC. This is problematic as the reports are just being scheduled to whatever server has the least load at the time, so on demand reports just have to wait until the long batches are over before they can be scheduled.
In CMC, there are two options for setting up server groups:
"Give preference to servers belonging to the selected group"
"Only use servers belonging to the selected group"
Our fix was to schedule these batches to server groups so that some of the servers would be available for on demand reporting. Since our goal is to have distinct server groups to help with load balance, we went with the "Only use" option. The functionality of this is pretty clear: Even if the needed servers (AJS) are disabled, stopped, or busy, the reports will still be scheduled to this server group. However, the functionality regarding the "Give preference" option is unclear.
My question is: Under what conditions would BusinessObjects switch to using a server not included in the server group if the "Give preference" option were used?
As far as documentation goes, the best answer I found was that the server would switch when the needed servers are "not available". What exactly does this mean?
When the server is disabled? (Assuming yes, this would be good for us)
When the server is stopped? (Assuming yes, this would be good for us)
When the server is busy? (No idea..., if yes, this would be bad)
If the server switches when the specified server is busy, then we just run into the same issue we had before, so we wouldn't want to do that. Does anyone have any insight into how this works so we can figure out which option to go with?
Thanks everyone!
Valentin Lazar

First reports will try to use the servers in the group, if they are not available, then it will go other servers.It may be disabled, or stopped.

Give me the functionality of transaction code st01

give me the functionality of transaction code st01

Hi Ravi,
The tx ST01 give a datailed trace of the underlying system while executing something from sap.
For example what Authorization objects are hit by a user when he performs a tcode or what are the dbtables/sqlstatements etc are run or what kernel functions are executed .
This somewhat helps in debugging like matters.
One can even set parameters for this by using filters.Suppose u want to trace what authorization objs are hit by a specific user when he executes a specific tcode got to edit ->filter->shared and enter the user name client no and tcode. So that not all the users are traced but only this specific user for the specific tcode is traced. On analysis u can knaow what authorization objects he hitted on executing the specific tcode.
Try it with the other areas like Db access, Table Buffer, etc and u will get a more clearer picture.
http://help.sap.com/saphelp_nw2004s/helpdata/en/1f/83113f4bc511d189750000e8322d00/frameset.htm
This is a good place to start with.
Pl dont forget to award points if resolved.
Regards

Function module to give all partner functions for given customer

Can anyone tell me function module name which gives all partner functions for a customer. For ex if we give customer number and sales area then it should give the list of all partner functions of this customer.
I know 'CUSTOMER_PARTNERFS_GET' function module. But I want other than this.

Hi,
U can join VBAK and VBPA table and get the parrtners of the customer..
Regards,
Nagaraj

How to give only one function module execution Auth for a User ?

Dear Experts
I have reviewed S_DEVELOP auth object. It is not ful filling my requirement
Any Ideas !!
Rgds

Rakesh...Firstly thanks for reply.
As i said i reviewed these and found it is not meeting my requirement.
As we aware We can control auth to Function modules thru object type
Filed OBJTYPE----
FUGR --> 1st control
and with Function Group Name
Field OBJNAME----
<Function Group Name> --> 2nd control
In my scenario - I have given the authroizations as below
++++++++++++++++++++++++++++++++++++++++++++++++++++
ACTVT            Activity                                                 Display, Execute
DEVCLAS       Package                                               *
OBJNAME      Object name                                         ZECC_FG
OBJTYPE       Object type                                           FUGR
P_GROUP       Authorization group ABAP/4 pro              *
++++++++++++++++++++++++++++++++++++++++++++++++++++
The above authroization is giving all Function modules authrozation under ZECC_FG Function Group.
My Requirement
I shoudl be able to give only one Function Module of a Function group where multiple function modules exist under the same Function Group.
How can i acheiveit. Any Custom Control can be place to acheive this.
I am sure S_DEVELOP will not solve my requirement (I Beleive)
Regards

Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?

Hello
I'm currently developping an image processing algorithm using Labview 7.1 and the associated IMAQ Vision tools. After several tests, I found a weird result. Indeed, I put the labview algorithm - including the IMAQ VI on the library to get sure that I use all the time the same VI - on my memory stick and used it on two different computers. I tested the same picture (still in my memory stick) and had two very different results.
After several hours trying to understand why, I found that there were a difference between the results given by both computers at the very begining of the algorithm. Indeed, I used a JPEG file.
To open it, I first create an Image with IMAQ Create (U8). Then, I open it.
Then in my first sub-VI, I use IMAQ Cast Image to be sure that the picture is a U8 grayscale picture.
Right after that, I use the IMAQ Linear Averages. The results of this VI are different on the two computers.
I tried several time on the same picture : one computer always give me the same result but the two computers give me a different result. So there is no random variable on the results.
So my question is : Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?
My bet is on IMAQ Cast Image but I'm not quite sure and I do not undestand why. The labview and IMAQ are the same on both computers.
The difference between the two computer are above :
Computer 1 :
Pentium(R) 4 CPU 3.20GHz with a RAM of 1Go. The processor is an Intel(R).
The OS is windows XP Pro 2002
Computer 2 :
Pentium(R) 4 CPU 2.80GHz with a RAM of 512Mo. The processor is an Intel(R).
The OS is windows XP Pro 2002.
If anybody can help me on this problem, it would be really helpful.
Regards
Florence P.

Hi,
Indeed it's a strange behaviour, could you send me your VI and your JPEG file, (or another file that reproduces) so that I could check this inthere ?
I'll then try to find out what's happening.
Regards
Richard Keromen
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Découvrez, en vidéo, les innovations technologiques réalisées en éco-conception

How do i give GoogleMaps permission to use my location

How do i give GoogleMaps permission to use my location - I re-set Privacy in Settings to turn it on and Google Maps still says it doesn't have permission

Look:
Settings>Privacy>Location Services and enable them for Safari.
Then try again.

Give me details about differrent views in generic extraction give details

give me details about differrent views in generic extraction give details such as database view, projection view, help view, etc please give detail

Dear Deba,
Projection view - Just retrieves some fields from a single table.
Help View - This is used for search help.
Database View - This is inner join view of one or more tables
Maintenance View - Helps in creating maintaining data of the application object. The data can be distributed among several tables
Data Base View:
A database view is defined in the ABAP Dictionary and automatically created on the database during
activation. Accesses to a database view are passed directly to the database from the database interface.
The database software performs the data selection.
If the definition of a database view is changed in the ABAP Dictionary, the view created on the database
must be adjusted to this change. Since a view does not contain any data, this adjustment is made by
deleting the old view definition and creating the view again in the ABAP Dictionary with its new definition.
The maintenance status defines whether you can only read with the view or whether you can also write
with it. If a database view was defined with more than one table, this view must be read only.
The data read with a database view can be buffered. View data is buffered analogously to tables. The
technical settings of a database view control whether the view data may be buffered and how this should
be done. The same settings (buffering types) can be used here as for table buffering. The buffered view
data is invalidated when the data in one of the base tables of the view changes.
Maintainance View:
Data that is distributed on more than one table often forms a logical unit, called an application object.
You should be able to display, change and create the data of such an application object together. Users
usually are not interested in the technical implementation of the application object, such as the distribution of the data on several tables.
You can maintain complex application objects in a simple way using a maintenance view. The data is
automatically distributed on the underlying database tables.
All the tables used in a maintenance view must be linked with a foreign key. This means that the join
conditions are always derived from the foreign key in the maintenance view. You cannot enter the join
conditions directly as in a database view.
A maintenance interface with which the data of the view can be displayed, changed and created must be
generated from the definition of a maintenance view in the ABAP Dictionary.
When the maintenance interface is created, function modules that distribute the data maintained with the
view on the underlying tables are automatically generated.
The maintenance interface is generated with the Transaction Generate Table View (Transaction SE54)
or from the view maintenance screen with Environment -> Tab.maint.generator.
Database views implement an inner join. You only get those records which have an entry in all the tables
included in the view.
Maintenance views implement an outer join.
Help View:
A help view is defined analogously to a maintenance view. Help views can only be used as selection
methods in search helps. Since the R/3 System cannot pass the selection directly to the database using
a help view, it must generate its own access routines. The database view should therefore be used as
selection method in preference to the help view.
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
Regards,
Ram.

How to extract master data attribute from r/3 to bw give steps details

how to extract master data attribute from r/3 to bw give steps details screenshots

Hi
Go through the below process to extract Master Data Attribute from R/3
Hi,
Maintaining Generic DataSources
Use
Regardless of the application, you can create and maintain generic DataSources for transaction data, master data attributes or texts from any transparent table, database view or SAP Query InfoSet, or using a function module. This allows you to extract data generically.
Procedure
Creating Generic DataSources
1. Select the DataSource type and specify a technical name.
2. Choose Create.
The screen for creating a generic DataSource appears.
3. Choose the application component to which you want to assign the DataSource.
4. Enter the descriptive texts. You can choose any text.
5. Select the datasets from which you want to fill the generic DataSource.
a. Choose Extraction from View if you want to extract data from a transparent table or a database view. Enter the name of the table or the database view.
After you generate the DataSource, you have a DataSource with an extraction structure that corresponds to the database view or transparent table.
For more information about creating and maintaining database views and tables, see the ABAP Dictionary Documentation.
b. Choose Extraction from Query if you want to use a SAP Query InfoSet as the data source. Select the required InfoSet from the InfoSet catalog.
Notes on Extraction Using SAP Query
After you generate the DataSource, you have a DataSource with an extraction structure that corresponds to the InfoSet.
For more information about maintaining the InfoSet, see the System Administration documentation.
c. Choose Extraction Using FM if you want to extract data using a function module. Enter the function module and extraction structure.
The data must be transferred by the function module in an interface table E_T_DATA.
Interface Description and Extraction Process
For information about the function library, see the ABAP Workbench: Tools documentation.
d. With texts you also have the option of extracting from fixed values for domains.
6. Maintain the settings for delta transfer, as required.
7. Choose Save.
When performing extraction, note SAP Query: Assigning to a User Group.
Note when extracting from a transparent table or view:
If the extraction structure contains a key figure field that references a unit of measure or a currency unit field, this unit field has to be included in the same extraction structure as the key figure field.
A screen appears on which you can edit the fields of the extraction structure.
8. Edit the DataSource:
○ Selection
When you schedule a data request in the BI scheduler, you can enter the selection criteria for the data transfer. For example, you can determine that data requests are only to apply to data from the previous month.
If you set the Selection indicator for a field within the extraction structure, the data for this field is transferred in correspondence with the selection criteria in the scheduler.
○ Hide field
You set this indicator to exclude an extraction structure field from the data transfer. The field is no longer available in BI when you set the transfer rules or generate the transfer structure.
○ Inversion
Reverse postings are possible for customer-defined key figures. Therefore inversion is only active for certain transaction data DataSources. These include DataSources that have a field that is marked as an inversion field, for example, the update mode field in DataSource 0FI_AP_3. If this field has a value, the data records are interpreted as reverse records in BI.
If you want to carry out a reverse posting for a customer-defined field (key figure), set the Inversion indicator. The value of the key figure is transferred to BI in inverted form (multiplied by 1).
○ Field only known in exit
You can enhance data by extending the extraction structure for a DataSource by adding fields in append structures.
The Field Only Known in Exit indicator is set for the fields of an append structure; by default these fields are not passed to the extractor from the field list and selection table.
Deselect the Field Only Known in Exit indicator to enable the Service API to pass on the append structure field to the extractor together with the fields of the delivered extract structures in the field list and in the selection table.
9. Choose DataSource ® Generate.
The DataSource is saved in the source system.
Maintaining Generic DataSources
● Change DataSource
To change a generic DataSource, in the initial screen of DataSource maintenance, enter the name of the DataSource and choose Change.
You can change the assignment of a DataSource to an application component or change the texts of a DataSource. Double-click on the name of the table, view, InfoSet or extraction structure to get to the appropriate maintenance screen. Here you make the changes to add new fields. You can also completely swap transparent tables and database views, though this is not possible with InfoSets. Return to DataSource maintenance and choose Create. The screen for editing a DataSource appears. To save the DataSource in the SAP source system, choose DataSource ® Generate.
If you want to test extraction in the source system independently of a BI system, choose DataSource ® Test Extraction.
● Delta DataSource
On the Change Generic DataSource screen, you can delete any DataSources that are no longer relevant. If you are extracting data from an InfoSet, delete the corresponding query. If you want to delete a DataSource, make sure it is not connected to a BI system.
NR

Give me details about conversion routine like alpha

give me details about conversion routine like alpha and how many conversion routines are ther and their uses give detail

Hi Deba,
There are many Conversion routines...
ALPHA Conversion Routine
BUCAT Conversion Routine
EAN11 Conversion Routine
GJAHR Conversion Routine
ISOLA Conversion Routine
MATN1 Conversion Routine
NUMCV Conversion Routine
PERI5 Conversion Routine
PERI6 Conversion Routine
PERI7 Conversion Routine
POSID Conversion Routine
PROJ Conversion Routine
REQID Conversion Routine
IDATE Conversion Routine
Conversion Routine RSDAT
SDATE Conversion Routine
WBSEL Conversion Routine
Check this link for conversion routines and its types...
http://help.sap.com/saphelp_nw04s/helpdata/en/2b/e9a20d3347b340946c32331c96a64e/frameset.htm
Hope this helps u...
Regards,
KK.

Can u give an detail examples or help on SQL- loader

Can u give an detail examples or help on SQL- loader
I need full details on this how to run and what are the pre requirements for this and what
Can u give an example with unix+sql loader

The Oracle Utilities manual has a chapter on SQL*Loader Case Studies
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch10.htm#1656
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Can anyone give the details of SAP note 325525 .

Hai
Can anyone give the details of SAP note 325525 .
Thanks
Kumar

What exactly do you want. Is that just the explanation in the note: If so, here it is.
Summary
Symptom
WARNING: THIS NOTE HAS BEEN REPLACED. FOR MORE CURRENT AND MORE COMPREHENSIVE INFORMATION SEE NEW NOTE 886102.
You want to copy and or rename one or more systems (database or client copy). One or more of the systems is a BW system or is connected to a BW system.
Caution: This note only deals with problems that occur in the BW source system connections. Other problems that occur in the BW environment (indexes) are NOT dealt with. See URL http://www.service.sap.com/bw --> Services & Implementation --> System copy & Migration.
Other terms
BW, source system, OLTP, database copy, client copy, system infrastructure, transport system, connections, RFC connection, trfc, transfer structure, IDoc, ALE customizing, logical system name, system changeability, renaming systems, system copy
Solution
Several scenarios are possible in this environment. Find the scenario relevant to your situation below and execute the steps listed or read the note(s) specified:
Scenario 1) You do not want to copy a system but only want to rename one (changing a logical system name).
           Solution scenario 1): Execute Transaction BDLS both in the client to be renamed and in the connected BWs or BW source systems. To do this, see Notes 121163 and 369758.
           Check the RFC destinations in all connected BWs/BW source systems as described in Note 524554.
           Reactivate all partner agreements that carry the new logical system name after renaming.
Scenario 2) You want to copy the entire system infrastructure connected by the BW source system connections (that means the entire system group) by a database copy. SAP recommends this procedure for copying systems.
           Solution scenario 2):
If you want to rename one or more of the copied systems, then execute Transaction BDLS both in the client you wish to rename and in all the connected BW and BW source systems. See Note 121163.
                    Make sure that an RFC destination exists with the new logical name in every connected BW or BW source system.
                    Reactivate all partner agreements that carry the new logical system name after renaming.
Change the hosts in the appropriate RFC destinations so that they refer to the correct computer. For this, see Note 524554.
Scenario 3) You want to copy a single BW system of the group by database copy.
Scenario 3)a) You only want to exchange the hardware of your system but do not want to rename the system.
                     Solution scenario 3)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
Scenario 3)b) You want to keep the original system of the copy so that you have two systems after copying.
                     Solution scenario 3)b): See Note 184754.
Scenario 4) You want to copy a single source system of the group by database copy.
Scenario 4)a) You only want to exchange the hardware of your system but do not want to rename the system.
                     Solution scenario 4)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
Scenario 4)b) You want to keep the original system of the copy so that you have two systems after copying.
           Solution scenario 4)b): See Note 184322.
Scenario 5) You want to import a client copy in a source system.
           Solution scenario 5): See Note 325470.

Give me detail functions use boolean function, use detail

Similar Messages

Maybe you are looking for