Give me full details of Dynamic Configuration for file

Hi all,
please provide details of Dynamic Configuraion for file.
Thanks and regards
sai

Hi,
Refer the below weblog
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
And check for the Communication channel settings how to do for Sender & Receiver File channels, Dynamic configuration Code is also available in the weblog.The same code you can use in your UDF and map the output of your udf to one of u r target field.
By following this you can able to set the receiver file name as same is of your file name of Source.
Hope it will helps to solve u r problem.
Cheers
Veera

Similar Messages

Dynamic configuration for the application

I'm a newbie and trying to evaluate JSF. I took part in a project with struts framework and i could say i don't like struts cause of some limitation and i suspect that JSF has the same limitation. First of all, there are JSP pages. I can't use JSP pages/templates stored somewhere else except web application. I'd like to store my templates in the database. This will give me ability to add/change/remove jsp page without redeploying war-archive. Yes, i can use exploded war-archive and add JSP pages straight into file system, but i don't like this way. Next problem is the configuration file like struts-config (faces-config, whatever). I have to write down all my navigation logic and beans mapping to this file and it's really annoying me. This kind of project requires dynamic configuration for the all web application and i'd like to add/change/remove pages, beans, actions without restarting/reconfiguring webapp. Today, I looked thru documentation and source code and found that FactoryFinder class could use my own classes but i'm not sure it will be enough for the dynamic configuration for the beans. In any case, it's a huge problem with the templates.
Right now i'm thinking about 1(one) JSP with XML/XSLT rendered HTML content and JSF for event/action handling. I mean, i'll use XSLT to render dynamic content and JSF for dispatching events. In that case i have to render form tag names in the HTML as JSF engine (i'm not sure if it possible). If it will take a lot of time to do this i'll have to switch a home-grown framework.
So, i really need advices how to implement this sort of dynamic behavior in the web application.
regars,
anton

A lot of what you're seeing are genuine limitations, but happily, JSF is so pluggable that you can overcome them.
JSPs are problematic in exactly the way you describe - unless your app server has support for pulling JSPs out of a database, etc., you're SOL. JSF, however, lets you use something other than JSPs by replacing the ViewHandler. That's a fair bit of work, but it is doable.
For navigation logic, you'd replace the NavigationHandler. As long as you're willing to write the code that can pull navigation rules from an external source, life is good.
For managed beans, all you need to replace is the VariableResolver - again, if you can pull the rules from an external source, you have full control.
This is all far from easy - and it's a huge amount of work for one person - but I'd imagine these pieces will become available from various sources. A core goal of JSF 1.0 was making the framework as a whole pluggable so that others can innovate on top of the framework.
-- Adam Winer (EG member)

Can you please give me the details of Archiving object for Reservations

Hi All,
Could you please give me the details of Archiving object for Reservation documents. If there is no standard object can you please give me the details, for which program we are using.
Regards,
Ram

Hi,
You do not need to configure the tables to be deleted for any archive object through AOBJ. SAP would have maintained the list of tables from which data will be deleted if you archive a particular object. In case of archiving MM_EKKO, data will be deleted from many other tables apart from EKKO and EKPO. Here is the list of tables from which data will be delete if you archive PO using MM_EKKO.
A068
A081
A082
A215
ADR10
ADR11
ADR12
ADR13
ADR2
ADR3
ADR4
ADR5
ADR6
ADR7
ADR8
ADR9
ADRCOMC
ADRCT
ADRG
ADRGP
ADRT
ADRU
ADRV
ADRVP
AUSP
CDCLS
CDHDR
CDPOS_STR
CDPOS_UID
CMFK
CMFP
DJEST
EIKP
EIPO
EKAB
EKBE
EKBEH
EKBZ
EKBZH
EKEH
EKEK
EKES
EKET
EKETH
EKKN
EKKO
EKPA
EKPO
EKPV
EKUB
EREV
ESKL
ESKN
ESLH
ESLL
ESSR
ESUC
ESUH
IBADDR
IBIB
IBIBOBS
IBIBT
IBIN
IBINDOMAINS
IBINOBS
IBINOWN
IBINT
IBINTX
IBINVALUES
IBSP
IBST
IBSTREF
IBSYMBOL
INOB
JCDO
JCDS
JEST
JSTO
KAPOL
KOCLU
KONH
KONM
KONP
KONW
KSSK
MLBE
MLBECR
MLWERE
NAST
RESB
STXB
STXH
STXL
WRF_PSCD_DLHD
WRF_PSCD_DLIT
WRF_PSCD_DLIT_SH
Hope this helps
Cheers!
Samanjay

Dynamic Configuration for determining filename

Hi ,
I am using dynamic configuration for determining the filename sent by the sender
I am using the following code::
int i = 0;
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
if (ourSourceFileName.equals("data.txt"))
for (i = 0 ; i < 1 ; i++)
result.addValue(ourSourceFileName);
i have also 'checked' filename in set Adapter specific message propertiesas in sender communication channel.
But Still it is not working.
Please provide some help on it.
Thanks & Regards
Nilima

Hi,
Michal
In SXMB-MONIthe response part contains DYNAMIC CONFIGURATION node
and it displays::
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">try1.txt</SAP:Record>
</SAP:DynamicConfiguration>
please sir provide some help on it.
Thanks once again.

Dynamic Configuration for two file adapters communication channels

Hello Experts!!!!!!
     In one of the interface in my landscape, I am using two file adapters for creating two files with different names and at two different destination on F.T.P.
However the receiver service for both the communication channel are same.
In message mapping I am using multi mapping to create two files out a single message.
Now i have a requirement of changing file path and file name using dynamic configuration for both the comm channel.
When i doing dynamic coniguration for both the comm. channel. My interface is creating two files but with same name and on same destination which is set for second communication channel through dynamic configuration.
Here, I guess the second dynamic configuration is over writing the first dynamic configuration and hence creating two files with same name and at same destination.
Please suggest, if separate dynamic configuration for separate communication channel of same receiver service can be done?
Thanks & Regards,
Amol

Thanks for your prompt responses!!!!!
    Is there any way, By which in dynamic configuration I can find out the communication channel name and then change its parameter.
I mean if iam using say comm. channel A and B.
Then in dynamic configuration for A, I will first take communication channel A by calling it and then change its path/file name.
and then do samething for comm. channel B in its dynamic conf.
Regards,
Amol

Problem:obtaing file name using Dynamic configuration of file adapter

hi all
I am using Dynamic configuration for getting file name.
I am getting Dynamic configuration in SXMB_MONI containg file name, but payload is empty unlike file i am sending.

Hi All,
Basically my requirement to get Filename in idoc segments in order to validate the posting at month end.
Its an File to idoc scenario- GL Posting.
Please check attached UDF and it gives error. Kindly help. Thanks

Dynamic Configuration for IDOC

Hi,
Whenever an IDOC is send from SAP R3 system to PI (SAP R3 -> SAP PI -> Target), we get an additional node of Dynamic Configuration under the SOAP Header in SXMB_MONI.
Why is this happening? Does this happen for all the versions of SAP XI (PI)?
This issue does not occur when the IDOC is send by SAP PI to SAP R3 system (Source --> SAP PI --> SAP R3)
I am using SAP PI 7.1.1
Thank you,
Pankaj.

Hi,
Why this is an issue for you?
I am trying to send IDOC from SAP System to PI system.
Ideally there should be no DynamicConfiguration step under SOAP Header folder in SXMB_MONI (I tested a SOAP -> PI -> FILE and the Dynamic Configuration does not come); unless and until we make use of the ASMA properties (UDF/ Module). Is this understanding correct?
For example, if I send an IDOC i get the below details in SXMB_MONI:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<SAP:DynamicConfiguration SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="RCVPOR">SAPPI</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="SNDPRT">LS</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="RCVPRN">SAPPISYSTEM</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="SNDPOR">SAPECC</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/Message/30" name="CALLER_CODEPAGE">4102</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="SNDPRN">SAPECCSYSTEM</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="CIMTYP"/>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="IDOCTYP">Z_VALIDATION_ACK01</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="MESTYP">Z1VALIDATIONACK</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="RCVPRT">LS</SAP:Record>
</SAP:DynamicConfiguration>
Is this behavior as expected?
Thank you,
Pankaj.

Dynamic configuration for PI 7.1 in mapping for file adapter

Hi Experts,
I have used the code below to use dynamic configuration in PI 7.1, but it isnt working..
http://help.sap.com/saphelp_nwpi71/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm.
it shows the file name in the dynamic configuration in the sxmb_moni...
but hen i chekc it in operations mapping..it shows dynamicconfiguration has to be in queue ..
has ne one used it before??
I used a simple UDF to create it without any input parameter and I mapped it to a field n the target side...
has ne one faced a similar situation????
Regrads,
Tauseef

Hi,
Yes u r correct it will show error in operation mapping.. bcoz u cannot check the DynamicConfiguration in Operation mapping...
It will throw Exception..
The parameter to UDF depends on ur requirement.... Let us know ur requirements exactly...
If u r doing for file to file means no UDF required,, just check ASMA on both sides....
Babu

XSLT Mapping with Dynamic Configuration for Mail Adapter

Hi Guys,
I am wondering if somebody can help me please.
I have a requirement in which I need to pick up the file from FTP and email it to the user as an attachment with the same file name and content.
I know it is possible via 3 method either by deploying adapter module or via XSLT or JAVA Mapping.
I preferred XSLT Mapping because it is easier to use and we don't need to compile the code like JAVA Mapping.
I have done the XSLT Mapping but the only problem I am facing is that how to copy the file name which we get it from Dynamic Configuration to the Mail ContentDisposition.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:map="java:java.util.Map"
xmlns:dyn="java:com.sap.aii.mapping.api.DynamicConfiguration"
xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
<xsl:output indent="no" />
<xsl:param name="inputparam"/>
<xsl:template match="/">

 <xsl:variable name="dynamic-conf"
 select="map:get($inputparam, 'DynamicConfiguration')" />
 <xsl:variable name="dynamic-key"
 select="key:create('http://sap.com/xi/XI/System/File', 'FileName')" />
 <xsl:variable name="dynamic-value"
 select="dyn:get($dynamic-conf, $dynamic-key)" />
 <xsl:variable name="dummy"
 select="dyn:put($dynamic-conf, $dynamic-key, $new-value)" />
 
I tried many option but unfortunately none of them worked.
<Content_Disposition>attachment;filename="$inputparam"</Content_Disposition>
<Content_Disposition>attachment;filename="$dynamic-conf"</Content_Disposition>
<Content_Disposition>attachment;filename="$dynamic-key"</Content_Disposition>
<Content_Disposition>attachment;filename="$dynamic-value"</Content_Disposition>
<Content_Disposition>attachment;filename="$dummy"</Content_Disposition>
 <Content_Disposition>
 attachment;filename=
 <xsl:value-of select="dynamic-key"/>
 </Content_Disposition>
I really appreciate if someone can please provide some guidance.
Thanks,

Hi,
Yes u r correct it will show error in operation mapping.. bcoz u cannot check the DynamicConfiguration in Operation mapping...
It will throw Exception..
The parameter to UDF depends on ur requirement.... Let us know ur requirements exactly...
If u r doing for file to file means no UDF required,, just check ASMA on both sides....
Babu

UDF Using Dynamic Configuration for Counter Reset

Hi All,
In an Idoc to file scenario we want to have counter option at the end of the file.we are using NFS so that we wil not face any problem of counter reset on a j2ee restart
But when the counter turns 999999 it has to be reset to 0000001
So we are trying to dynamically create a file name using the counter and check whether it has reached 999999 then resetting back . I had written a code for the same but it is throwing an error while mapping and activating.
UDF CODE is below
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION) ;
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName") ;
String FileName = conf.get(key) ;
int inc = 1 ;
String temp = FileName.substring(10,6);
String temp1 = FileName.substring(0,10);
Integer seqNo = Integer.parseInt(temp) ;
if(seqNo == 0 || seqNo == 999999) {
seqNo = new Integer(inc) ;
else {
int num = seqNo.intValue() + inc ;
seqNo = new Integer(num) ;
container.setParameter("seqNo", seqNo);
String File_Name = temp1 + Integer.toString(seqNo);
conf.put(key, File_Name);
return File_Name;
ERROR it is throwing
'class' or 'interface' expected public String Decimal$(String Sample,Container container){ ^ /usr/sap/PJD/DVEBMGS58/j2ee/cluster/server0/./temp/classpath_resolver/Map76d12330b43811df8c1500e000a6fabc/source/com/sap/xi/tf/_MM_Sample_to_TRGT_.java:127: 'class' or 'interface' expected }
So can anyone please advice.

Hi Stefan,
I removed the last }
But stil it is throwing the below error:
Activation of the change list canceled Check result for Message Mapping MM_Sample_to_Trgt | : Starting compilation Source code has syntax error: /usr/sap/PJD/DVEBMGS58/j2ee/cluster/server0/./temp/classpath_resolver/Map8e67b780b44111dfbc4100e000a6fabc/source/com/sap/xi/tf/_MM_Sample_to_Trgt .java:98: FileName is already defined in File$(java.lang.String,com.sap.aii.mappingtool.tf3.rt.Container) String FileName = conf.get(key) ; ^ /usr/sap/PJD/DVEBMGS58/j2ee/cluster/server0/./temp/classpathresolver/Map8e67b780b44111dfbc4100e000a6fabc/source/com/sap/xi/tf/_MM_Sample_to_Trgt .java:102: incompatible types found : int required: java.lang.Integer Integer seqNo = Integer.parseInt(temp) ; ^ /usr/sap/PJD/DVEBMGS58/j2ee/cluster/server0/./temp/classpathresolver/Map8e67b780b44111dfbc4100e000a6fabc/source/com/sap/xi/tf/_MM_Sample_to_Trgt .java:103: operator == cannot be applied to java.lang.Integer,int if(seqNo == 0 || seqNo == 999999) { ^ /usr/sap/PJD/DVEBMGS58/j2ee/cluster/server0/./temp/classpathresolver/Map8e67b780b44111dfbc4100e000a6fabc/source/com/sap/xi/tf/_MM_Sample_to_Trgt .java:103: operator == cannot be applied to java.lang.Integer,int if(seqNo == 0 || seqNo == 999999) { ^ /usr/sap/PJD/DVEBMGS58/j2ee/cluster/server0/./temp/classpathresolver/Map8e67b780b44111dfbc4100e000a6fabc/source/com/sap/xi/tf/_MM_Sample_to_Trgt .java:111: cannot resolve symbol symbol : method toString (java.lang.Integer) location: class java.lang.Integer String FileName = temp1 + Integer.toString(seqNo);
Edited by: mallavarapu soundarya on Aug 30, 2010 4:44 PM

Alert Configuration for File to IDoc scenario

I have followed Alerts : Step-by-Step /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
and configured Alerts for file to IDoc scenario.
But the problem is, I did not notice any alerts being generated. I could notice the IDocs being posted to destination system. So I was going through Alerts-Troubleshoute Guide. In intension to maintain monitoring level, I clicked Configuration tab. But I did not notice my sender and receiver system there to maintain.
Can any body help me to detail out the procedure to add sender and receiver systems to maintain the monitoring level?
Regards,
Suraj Kumar

hi Suraj,
WHich SP version are you on??
If you are on Sp14 or above, then unfortunately, Michal's Trouble Shooting for Alerts will not help.
From SP14 onwards, activation of end to end monitoring is not needed for Alerting. Refer to this note 870232 for this info.
Next, to test if your Alerts have been defined correctly, go to SE38. In the program , type RSALERTTEST and then click on EXECUTE button ( F8 ). In the next window, it will ask you for your ALERTCATEGORY. Just give the name of your ALERT CATEGORY and click EXECUTE.
If you have configured your alerts correctly, you will receive a message that tells ALERT IS GENERATED and will give the ALERT ID.
Now, go to your Run TIme workbench and then select ALERT INBOX and see if you have got the ALERT message in your ALERT INBOX.
If this is working fine, then the last step, implement the note 913858.
Regards,
Bhavesh

Dynamic configuration- Is file name stored in any abap table in PI

Hi.
Is there any ABAP table in XI containing the dynamic configuration's xml of a message.
For any file scenario Can I get the file name from any of the abap table in PI
Regards,
Deepak

Interesting ABAP tables in XI
Interesting ABAP tables in XI Part I
Regards,
Phani

Dynamic configuration not fil in reused OM in NW BPM

Hi,
I'm having problem in operation mapping that i re-used in nw bpm.
In my scenerio in the operation mapping, a UDF writes on "TServerLocation" and in the next step of BPM, i have receiver determination rule which read from "TServerLocation" variable.
Below step calls OM which in PI.
(UDF writes on TserverLocation)
This next step, reads TserverLocation in receiver tab of Integration Conguration.
Receiver rule
So the problem is dynamic configuration doesn't write on TserverLocation or integration confiuration object removes in soap header somehow.
This was a ccBPM integration and all esr objects, mapping,udfs working fine. No problem with that.
I checked below blog but not get this work.
Dynamic Configuration not working with Integrated Configuration
Has anyone faced similar problem ?
Thank you
-Tahir

HI,
In general Correlation , concept, whatever we configured in Correlation editor , i mean in runtime which xml element should filled with which element of which interface ..as you said you have configured the local correlation to block, in block it is the first receive step, while receiving the first message which is relevent to first recieve step , i mean if it receives the one message which is related to first receive step inteface .. the respective element data will be filled in correlation id and it will assign on giud for processing , so while assign the runtime data to correlation element ( imean filling stage) check you said two elements in correlation does the first message contains these two elements ??
if so ok , no then check , and try to use the IM before calling the IP to fill the payload.
Regards
Chilla
Oh closed!!
Message was edited by:
Chandra Sekhar Chilla
Message was edited by:
Chandra Sekhar Chilla

Dynamic name for File through FTP Adapter

I am working on FTP Put and I have a requirement where in I have to generate the file with dynamic content in its name.I should actually embed a Purchase Order number in that file name follwed by a sequence number.I dont need any time stamp.Should I create a variable for this?
Help in this regard would be highly appreciated.

Hi,
you have to enable the adapter specific parameter --> file name in both the sender and the receiver CC to get the input file name as output file name.
Refer this blog:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Also you need to use this udf
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Also refer this blog:
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Regards,
Nithiyanandam

Dynamic configuration - missing files

Hi,
during processing of message Dynamic Configuration is used.
Inside SOAP response is written file name and Directory where file should be generated.
But file is missing..
Message seems to be processed successfully.
Any idea what could happen?
M.

Hi,
>>>Inside SOAP response is written file name and Directory where file should be generated.
if this is a reponse you're doing request response beans ?
>>>Message seems to be processed successfully.
have you checked for any errors in the channel too or only message monitoring ?
do you see the message in the MessagingSystem monitor ? what is the audit saying - was the file generated ?
Regards,
Michal Krawczyk

Give me full details of Dynamic Configuration for file

Similar Messages

Maybe you are looking for