GL security works for one report and not for other report.

Hi everybody,
We have setup GL security and for our discoverer reports we are calling
APPS.GL_SECURITY_PKG.VALIDATE_ACCESS( sl.SET_OF_BOOKS_ID,gl.CODE_COMBINATION_ID ) = 'TRUE' in the query.
Now among 3 reports, 2 are working fine but one report is not showing any data if i use the above condition.
Hint: That particular report is based on a Materialized view.
Any ideas??
Thank you
--Kumar

Hi Rod,
Thanks for your reply but when i try to use the where
condition in the folder in Admin, its not recognizing the Apps.GL_SECURITY_PKG.VALIDATE_ACCESS....
Any Suggestion on this?
Thank you
--Kumar

Similar Messages

PO approval hierarchy working on one user and not on other

Hi all,
I am using an approval hierarchy with one preparer and one approver for Purchase order and requisition.
User A is preparer and User B approver.
Requisition hierarchy is doing fine but the Purchase Order Hierarchy gives this error on forewarding the PO..:: " PO Approval Top Process : Error, Wait for Concurrent Programme"
If i assign a different user to this Preparer, the process works fine.
What am i doing worng or what issue am i over looking.
Thanks in Advance.

Found the solution.
Apperently on this installation, my preset named RegularExport should be found with name [RegularExport].
Strange that this works on on installation.

How can I fix my iSight settings when it works on one account and not the other?

iSight continually crashes third party applications. I've checked another account on my MBP, and iSight works on different accounts. What settings can I troubleshoot on the account?
Thank you!

Although the documentation says you can copy Time Machine backups in the Finder, it's very slow and sometimes doesn't work at all.
Launch Disk Utility, open the built-in help, and search for the term "Duplicate." Follow the instructions. All existing data on the destination volume will be erased. That shouldn't be a problem, because you don't want to mix backup and non-backup data on the same drive anyway. Turn Time Machine OFF in its preference pane while copying the volume.

Why does wireless work for one laptop and not the other?

I have two laptops:
1) MacBook: 10.4.8, Airport Exteme (Firmware 1.0.46)
2) G4: 10.3.9, Airport Extreme (405.1 (3.90.0.p18)
I have the two machines sitting right next to each other in my apartment. Machine #1 has full wireless signal strength. Machine #2 barely has any wireless signal. Neither is running Interference Robustness. Any ideas why one would work and the other would not, or suggestions as to how to debug this problem?
I have tried stopping and restarting the Airport Extreme card on machine #2. I have also tried power cycling machine #2. This does not fix the problem.
A little more history: for a long time I was having problems with machine #2 dropping the wireless connection. As part of trying to work around these problems I turned on Interference Robustness on machine #2. This fixed the dropping signal problem, but left me with weak signal strength. I shut off Interference Robustnes but ever since then the signal has still been weak on machine #2.
Mac Mini Duo 1.66 GHz, 2 GB Mac OS X (10.4.6)

The base station uses a single channel which all clients must use to connect.
Have you checked the antenna connection into the card? Many people are surprised about how far the wire is actually supposed to be pushed into the card. Compare the connection with the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card.

Events working on one server and not the other

We have a development and a production server for LC. I have events working on the development server that accept parameters.
The services were deployed to the production server and the following error occured:
2010-05-04 09:14:04,203 ERROR [STDERR] May 4, 2010 9:14:04 AM com.adobe.idp.scheduler.callback.ServiceCallbackHandler execute
SEVERE: Exception thrown while calling back a DSC componentINVALID_CHARACTER_ERR: An invalid or illegal XML character is specified.
2010-05-04 09:14:04,203 INFO [org.quartz.core.JobRunShell] Job Asynchronous.SWR.RAAC.RequestSendEmail:12729788401870.18563775243350922 threw a JobExecutionException:
org.quartz.JobExecutionException: java.lang.Exception: org.w3c.dom.DOMException: INVALID_CHARACTER_ERR: An invalid or illegal XML character is specified.
[See nested exception: java.lang.Exception: org.w3c.dom.DOMException: INVALID_CHARACTER_ERR: An invalid or illegal XML character is specified. ]
    at com.adobe.idp.scheduler.callback.ServiceCallbackHandler.execute(ServiceCallbackHandler.ja va:102)
    at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
    at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
Caused by: java.lang.Exception: org.w3c.dom.DOMException: INVALID_CHARACTER_ERR: An invalid or illegal XML character is specified.
    at com.adobe.idp.scheduler.callback.ServiceCallbackHandler.execute(ServiceCallbackHandler.ja va:101)
    ... 2 more
Caused by: org.w3c.dom.DOMException: INVALID_CHARACTER_ERR: An invalid or illegal XML character is specified.
    at org.apache.xerces.dom.CoreDocumentImpl.createElement(Unknown Source)
    at com.adobe.idp.event.xml.XMLGenerator.createElement(XMLGenerator.java:500)
    at com.adobe.idp.event.xml.XMLGenerator.createEventDataDocument(XMLGenerator.java:293)
    at com.adobe.idp.event.content.EventContent.createEventDataXML(EventContent.java:173)
I took the xml from the production service and ran it through the development server, it worked fine.
Any idea as to where to start the troubleshooting?
Cheers,

It would seem that when the LCA we created to be pushed to production, the event template XSD did not get rolled up. So when the LCA was deployed, there was no definition for the event.
What would cause this? Do you have to select another option when creating the LCA? Do you have to re-define the template after the LCA is deployed?
Further information would be greatly appreciated.

Dunning form F150- Telefon/fax/mail printing for 1 user and not for other

Hello expert,
This is regarding the printing of the dunning form using F150.
At first, using company code and account clerk (BUSAB), we retrieve the user id. The program uses FM BAPI_USER_GET_DETAIL to get the address details of this user id. The user name, telephone and fax adn email are printed in the dunning form (1st reminder, 2nd reminder and so on). The problem here is , the address details are printed on the form for one user and not for the other user who is processing. Any idea regarding this. Do I need to give any user setting parameter in SU01 or is there any authoriztaion issue which is blocking this. Awaiting reply,
Cheers,
Bala

I'm having the same problem with Exchange 2003, I can get it to work with Entourage and on my iPhone, but it keeps rejecting my password on Mail.app. If I keep entering the password it starts to update with server, but it won't save the password. IMAP is on for my account which is how it works on iPhone.
I'm starting to think it has something to do with Keychain Access or Mail.app and not so much Exchange Server. If anyone has found a solution please let me know,
Thanks

Auto To working for one material and not working for other material

Hi,
Hope everybody is doing fine.
I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
I didn't setup the back ground processing job. Is that is affecting it?
thanks for any help.
regrads,
KHAN

Thnaks,
You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
Appreciate your time charlie

Airplay works for one user but not for another on the same machine

I have the problem where airplay works for one user but not for another and both users are on the same machine. For the user where it does not work, everything appears normal, it's just that there is no sound being transmitted. I have tried restarting the Airport express, restarting iTunes, repairing disk permissions. Any ideas about what can be done to resolve this?

my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004:

Classic - text ringtones work for one contact but not for others

Just got the new Blackberry classic. I'm having trouble with the ringtones for the text messages. The custom ringtone works for one contact but not for the others. I have taken the same custom ringtone that works for contact A and used it for contact B but it only works for A. B sounds the default ringtone from the default profile instead of the custom ringtone.
I have deleted all contacts and done a re-sync thinking something was corrupt. That didn't work.
None of the contacts have a link.
I have changed the notification profile and it still doesn't work.
I have deleted a contact and recreated it manually. It still doesn't work.
I finally deleted my dad's contact and from the phone app created a new contact. I set a custom ringtone for him and it worked. I of course had to recreate all his other information manually. Please tell me there is some other way to fix this than recreating manually all 147 contacts in my contact list.
I read that if the phone number has the hypen or space it won't work, but my dad's contact info that I created from the phone app has the hypen and it rings with the custom ringtone. Also contact A has no hypen in the phone number and it rings the custom ringtone. So that didn't seem to matter.
I have spent hours on Google and see that lots of people have had this problem (but not everyone) but have not yet found a solution.
Surely someone has found a fix for this issue.

Make sure that the contact has "Mobile" as the field for her number and not "iPhone".
Note that the iPad cannot send SMS messages.

Why wont apple accept the fact that 4.0 is for iphone 4 and not for 3gs?

Having all those problems said with 3g/s running on iOS 4.X why wont they let us just downgrade back to 3.1.3 officially until they find a way on how to solve issues with 3g/s?
About the downgrade method of life hacker, if you're really not good in those things you might actually ruin your pc like my friend who tried it, she lost her wifi on her notebook, i had to help her find the installer of the driver again. this happened after she tried to install that libusb that is needed to run the application for exit recovery mode and other stuff.
Yes iOS 4.1 is out but contacts disappearing? And who knows what more problems it brings. I was even peeking around the iphone 4 forums it seems that they are not doing well either.
Anyway mine is all fine except that im afraid to use wifi or any apps that needs internet connection because everytime i do, my 3gs gets very very hot. I have already done the basic solution suggested by apple (factory reset, start from new iphone) but its still the same.
And another thing, the multitasking is getting annoying, you have to manually close all apps in the 'multitasking background' everytime you decide to quit an app. I guess they should put a 'Disable multitasking' or something like that.

Firenzo wrote:
Why wont apple accept the fact that 4.0 is for iphone 4 and not for 3gs?
Because it works beautifully in the 3GS, with better battery life, faster operation and some great new features.
Having all those problems said with 3g/s running on iOS 4.X why wont they let us just downgrade back to 3.1.3 officially until they find a way on how to solve issues with 3g/s?
If you are having problems it is NOT from 4.0; there is something else wrong with your phone. There are plenty of troubleshooting tips in the forum if you look.
And another thing, the multitasking is getting annoying, you have to manually close all apps in the 'multitasking background' everytime you decide to quit an app. I guess they should put a 'Disable multitasking' or something like that.
NO YOU DO NOT. Those apps in the ribbon are not multitasking, they are suspended. You can ignore them and they won't hurt battery life or memory, unless they are streaming apps like Pandora.
It's amazing. For 3 years people screamed about the fact that the iPhone didn't support multitasking. Now they scream because the phone DOES multitasking. You can't win.

When printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000

when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
please can anbody help or advise?

You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System

Setup of Inspection Lots for some vendors and not for all

Hello,
We do have a situation where in the business wants Inspection Lots to be set up for some vendors and not for some vendors - for the same material.
What it means is, for Material XXXXX001, Vendor 00003 needs inspection during GR for Purchase Order and Vendor 00005 and 00006 should be set up for Non Inspection upon GR and stocks should be posted to Unrestricted.
Any suggestions / options are welcome.
Thanks
Kris

Hello,
You can use vendor q-info records to handle this... deactivate the goods receipt inspection on the vendor(s) that do not require incoming inspection.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/b9b3341a933f50e10000009b38f83b/frameset.htm
Regards,
John

HELP!! WRT54G2 works for one computer, but not for the other

I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!

As your one computer is working fine then there is no problem with the router so far...
The computer which is not working...check the IP Address on that...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

I was trying to use the Matlabscripting VI, but it says it is for instructional purpose and not for research and the system is getting stuck.When I used it two days back it worked.Could U plz tell me what the problem is??

I have Labview 7.0 and Matlab 6.5 installed on all the computers at my School. When I tried to use the Matllab Scripting Window for the first time, it worked, but after two days when I was trying to run the program, there was a meesage saying that the License is for instructional Purpose only and not for Research or commercial use and the Labview is getting totally stuck. I need the Matlab Scripting VI for my Project,could anyone suggest what I shd do or is there any other method by which I could do that.

Hello Medha,
Thank you for contacting National Instruments.
From the information you have provided, I am not sure what is causing your problem. Make sure that you do not have an evaluation license for LabVIEW.
What, if anything, was changed in your VI before it stopped working? Will it run without the Matlab script?
If you continue having trouble getting your VI to work, please respond with more information. If you like, you can post your VI (along with any necessary sub-VIs) and I will take a look at it.
Have a great day,
Sean C.
Applications Engineer
National Instruments

"No connectivity with the server" error for one document but not the other, in the same document library

We have a number of users all of a sudden getting "No connectivity with the server. The file 'xxx' can't be opened because the server couldn't be contacted." errors trying to open MS Office docs (Word, Excel, etc.) in SharePoint with IE,
just by clicking the link and selecting the "Read Only" option. If they select the "Check Out and Edit" option, they can open the document no problem. One of my customers gets the error on one document but not the other, in
the same document library! The older document (a weekly report) was copied and renamed as per standard procedure. She can read the older document, but not the new one.
It is definitely a profile issue, as other people have logged onto the machines of the users with problems and do not get the error. We have also renamed people's c:\user profile folders and the corresponding Profilelist registry entry and the newly
created profile does not experience the error for these people. Renaming the profile back restores all their personal settings but the error reappears. When we copied the old profile's folder structure into the new profile, many of the user settings
were restored (but not all, like Dreamweaver settings) but the error did not appear. We think that the system folders files (like AppData) weren't totally copied over so we're going to run another test using xcopy. We are rebooting between
logons to make sure all files are unlocked.
The laptops and computers are mainly 32bit, Win7 Enterprise running IE9 and Office 2010 Professional Plus, but there's a few 64bit machines as well. The SharePoint farm has 1 WFE, 1 App Server running search and CA, and a shared database server running SQL
2005 SP4. SharePoint is 64bit MOSS 2007 with the latest CU.
We've checked the logs on the client as well as on the server and there aren't any helpful entries. We've also run Process Monitor, also with no helpful entries. We're planning to run something like Fiddler next.
It's not everyone, because there are many people are accessing the SharePoint system and the same files. It is also not a permission thing, as we've tested by giving the users elevated permissions with no changes. One person experiencing
the errors is a Site Collection Admin. That same person ran a test where I coped a simple Excel file into a Document Library which contained a problem file. They were able to open it Read Only no problems that day, but the next day, the same
file gave them an error. In their case, they usually get a "xxx is not checked out" error and only occasionally get the "No connectivity with the server" error.
We've tried lots of things including:
Deleting IE cache
Deleting SharePoint Drafts and webcache folder contents
Running IE without add-ons
Upgrading and Downgrading IE
Uninstalling and re-installing IE
Reinstalling our SSL certs
Repairing Office
Removing and then adding back in the Microsoft Office "Microsoft SharePoint Foundation Support" Office Tool
Deleting all HKLM and HKLU Office registry settings
Toggling IE Compatibility Settings
Toggling the IE Automatic Logon option
Toggling the location of checked out files
Adding the site in the trusted sites list
Adding the site to the WebClient\Parameters registry locations
Making sure the WebClient service is started
Rebooting the machine (lol :)
This is becoming a serious issue, not just because of the inconvenience for the users having to check out every document they want to read, but we have some files with macros that open up other documents to run which are now failing. There aren't
"check out" workarounds for some of those macros.
We're planning to open a ticket with Microsoft, but I'm throwing it out here first in case someone has run into this before, or may have some suggestions on what to try next. Thanks!
-Richard.
PS I think this needs to be in the "General" forum instead?

It took three days of dedicated troubleshooting, but I have found the cause of the errors, and a couple of fixes. It helped tremendously that my own machine was throwing the error. I have scheduled a couple of users to work with me to test the
various fixes, to see which one works best, so the story isn't over yet.
I had backed up my c:\users profile folder and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry key so I could restore my profile after I was done. I made a copy of the profile folder and was using that for awhile,
but then made another copy where I had deleted a lot of content out of it so that the copies would go faster. Since a newly created profile did not have errors, I was trying to copy back as much of the profile as possible to make it easier for our users
to get back to work. Instead of blowing away their profile and starting from scratch (which we know worked) I wanted to narrow down what was causing the error and just skip that from the restore. The concept was to keep as much as the users profile
in tact (application settings, etc.) not just restoring their desktop and My Documents folders.
When we first tested a few weeks ago, simply copying the folder contents didn't reproduce the error. I then tried xcopy, but got the "can't read file" error. Then I tried robocopy, and ran into the "junction" problem.
I went back to xcopy, and found that placing the excludes.txt file in the windows/system32 folder eliminated the error.
So the process went as follows:
Reboot and log into the machine as another user
Delete the profile and associated registry key
Reboot and log into the machine as the affected user, creating a new profile, and there is no error
Reboot and log in as the other user
xcopy the contents of the skinned-down backed-up profile to the newly created profile
Reboot and log in as the affected user, and the error occurs
Repeat the above, but add items in the excludes.txt file to see what, when eliminated, causes the error not to appear in the last step
I eventually found that skipping the c:\users\<profile folder>\appdata\local\Microsoft\office\14.0 folder allowed the entire profile to be copied over without the error occurring. That was strange, because we've cleaned out the cache folders
before which didn't fix the issue.
So I went about it the opposite way, and tried to delete the 14.0 folder from the restored profile, and after reboot, the error still occurred.
What eventually worked was deleting the 14.0 folder and copying over a 14.0 folder from a newly created profile!
One way to do this was to:
Reboot and log in as another user
Rename the c:\users profile folder
Rename the appropriate [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList] registry key
Reboot and log in as the affected user, confirm that there is no error
Reboot and log in as the other user
Copy the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder to the other user's desktop
Delete new profile folder, and rename the backup to be the production folder
Delete the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder and then paste the 14.0 copy from the desktop
Reboot and log in as the affected user, confirm that there is no error
We've tried this on a couple machines and it works. I had to run Windows Explorer as Administrator to access the other profile's folders.
We've also successfully copied a 14.0 folder created by one profile on one affected computer over another profile's folder on another computer, eliminating the error, so we're trying that first, as that is fewer steps.
We may attempt to script this, but the self-help instructions are only 5 lines long:
Reboot and log into the affected computer with another account
Go to <link to location of 14.0 folder on network> and copy the 14.0 folder
Run Windows Explorer as Administrator
Go to c:\users\<profile folder>\appdata\local\microsoft\office and delete the 14.0 folder, and paste the copied 14.0 folder (trying to overwrite it makes Win7 want to merge the folders)
Reboot and log into your normal account, and confirm the error is gone
I'll come back and report after we go into the field with this fix, but after the few tests, I am cautiously optimistic that this is it.

IPhone 5 wifi works in one room but not the other.

I have an iPhone 5 and the wifi is unreliable. It works in the room with the router but when I walk down the hall it doesn't work. I'm talking 20 feet away. So frustrating because the phone is almost worthless. Why would it connect but only in such close range? No other devices have this problem. Yes, I've turned the wifi on and off. Yes, I've restarted the router. Yes, I've checked the WEP. It just makes no sense that it would work in one room but not the next room. Help!

Hello Gnpco,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Wi-Fi and Bluetooth: Potential sources of wireless interference
http://support.apple.com/kb/HT1365
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
Best of luck,
Mario

GL security works for one report and not for other report.

Similar Messages

Maybe you are looking for