Global customers need a few more options...
I would just like to go on record and say that if you are going to offer Global service you shouldn't assume that everyone is going on a two week vacation. I'll be in China for the next three years, sales reps told me, "oh China is a CDMA country you'll be fine with the Droid X" well I get here and the Droid X is great but China's CDMA service sucks so I stay Verizon loyal and order the Droid 2 Global well that's a great device too but the CDMA wont work because I'm not under a Verizon tower... Now don't you think that it would make sense to have an internet option so that your Global customers can plug their phone into their computers and program via direct communicate with your servers? It's not rocket science and you have the technology so in my opinion while your phones are first rate your global service is in the toilet!
I don't think Verizon's global service is intended to be a long-term solution for cellular service. It is designed for people who need temporary international usage due to personal or business travel. You're going to find much more cost effective solutions by getting your service from a local provider when you are talking about being in country for 3 years.
Similar Messages
-
Need to Create More Options in Cisco ACS 5.2 User section
Hi Team,
I Need to create more options on Cisco ACS 5.2 under internal identity store in users. please help how to do add, default not showing all.
i have seen on internet. attaching doc.
Regards
MRTo create additional attributes for internal users do the following:
- go to System Administration > Configuration > Dictionaries > Identity > Internal Users
- Press Create to define the additional attributes you require
For each attribute can
- define the type
- give a default value. This will be applied to all existing users and appear as default when new user is created
- indicate whether the attribute is required and must be defined for each user
- define a policy condition. If define such a condition will appear as an option when customize rules in a policy -
JustAnswer has asked me to answer your question -- "Apple TV: how to reset WiFi password. I do not recall the original PW am hitting a brickwall and I am ready to jump off! Please advise- many thanks
1)Your going to have to go to the manufacture's website for the orginal password. Once you have that you will have to setup you network again.
2)After your network is setup again you will go to general setting menu on the ATV. Select the Network option then Configure Wifi option. It will take a momment and load all the WIFI networks in you area. Once you selected your network, it will prompt you to enter the password. -
I upgraded to 9.01 of Firefox and now get an error 'MORZCRT19.dll" --
If you use ZoneAlarm Extreme Security then disable Virtualization and reinstall Firefox.
See these about a similar problem caused by ZoneAlarm.
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
*[[/questions/880050]] -
Is it possible to add more option like "default date format mask" for results that are output in the grid?
I am using this product since this AM and I already love it.
ps: Will this be the right forum to request nwe enhancements?
Rajwe have logged this as an enhancement request. This is a great place for enhancement requests; one person sugested using a single thread for enhancement requests, and created a thread called enhancement requests; but we will take good ideas any way we can.
Mike -
Exporting to ProRes...nothing happens when clicking "More Options" under Video Quality
When I tried creating a new export preset with any of the Apple ProRes codecs, under "Video Quality", when I click "more options" nothing happens.
Is this supposed to happen?
Also, I've created a few export presets for testing purposes. How do I delete the ones which I do not want in the drop-down menu?Yes, I'm afraid that the behaviour with the "More Options" button is normal.
If you want to remove output settings you created, browse to the output-folder and just delete the ones you need. In my case (MacOSX.7.5) it is located here:
/Users/<user name>/Documents/Adobe/SpeedGrade/6.0/settings/output/ -
I have a MacBook Pro from '07 with 1 GB of memory. The battery is shot and my AppleCare has run out. I just upgraded the OS to 10.6.8. But a few questions:
1 - How do I even check how much memory I have left on this computer?
2 - How do I check how many battery cycles are left?
3 - I want to upgrade to Microsoft Office '11 because I don't have Adobe Acrobat to creat pdf's and I need to be able to do this for school... Instead of buying acrobat, I figured I would just upgrade to Office '11 because I can generate pdf's from Word. Roughly how much RAM does Office '11 take up?
4 - Does Apple still make batteries for this computer (from '07)? How much do they cost?
5 - How much does 1 more GB of memory cost?
AND lastly -- is it even worth it to spend the $ on more RAM, a new battery and Office '11?
Or does it make more sense to just get a new computer entirely? (trying to avoid this).
ANY help would be sooo appreciated! Thanks.1 - How do I even check how much memory I have left on this computer?
If you're asking how to check to see if you need more RAM, open Activity Monitor and go to the System Memory tab, then compare page outs and page ins. If page outs is 10% or more of page ins, you probably need more RAM.
2 - How do I check how many battery cycles are left?
There's no limit on the number of battery cycles, it's just that the more cycles you've used the more "worn out" your battery gets. You've got a 4-year-old machine, and if it's still got the original battery, it's probably about time for a replacement battery. You can check battery health using System Profiler... look at the Power section under Hardware.
3 - I want to upgrade to Microsoft Office '11 because I don't have Adobe Acrobat to creat pdf's and I need to be able to do this for school... Instead of buying acrobat, I figured I would just upgrade to Office '11
You don't need Office 2011 to create PDFs. Any application capable of printing can create PDFs on a Mac. Just choose File -> Print, but instead of clicking the Print button in the print dialog, click the PDF button and choose Save As PDF in the menu that appears.
4 - Does Apple still make batteries for this computer (from '07)? How much do they cost?
5 - How much does 1 more GB of memory cost?
I'll "ditto" sig's answers to these.
AND lastly -- is it even worth it to spend the $ on more RAM, a new battery and Office '11?
Or does it make more sense to just get a new computer entirely? (trying to avoid this).
If Office 2004 is still working fine for you, stick with that and don't incur the costs of Office 2011. As to the RAM, only add more if the test I mentioned above indicates that you need it. If you buy more RAM when you don't really need it, you won't see much (if any) performance improvement. That just leaves the battery... and if the machine is still doing what you need it to do and you don't really need a new machine for anything, you could definitely buy a new battery and get a few more years out of it. -
Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.
ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3." -
Will I need to put more memory on my MacBook Pro for Mavericks?
I got my MacBook Pro in Februrary 2013 (so I think it's a mid 2012 model? Not sure). The memory for it is 4gb and 1600mhz. It came with OS 10.8, but I am now upgrading to Mavericks. My question... will I need to get more memory to fit Mavericks onto my computer? Or will what I have suffice? I don't have much stuff on my computer; I backed everything up before beginning the process (should be done in a few hours, and I can always pause it if necessary). The backup flashdrive holds 8gb and I'd say, in total, I have about 4.5gb worth of stuff (word documents, pictures, and videos) on my computer. How will that affect what Mavericks takes up (Mavericks says it needs 5.32gb of space)?
venom --
With all due respect, I find it hard to believe you ever worked at Apple.
You can't spell. And you believe that Mavericks only needs 1 GB to install. Totally incorrect.
I can easily upgrade my computer with more memory, too, after all is said and done.
Do that, you'll love it.
Babowa & KOT: Right on. -
I am currently using FormsCentral to distribute a form created in Acrobat. I need to add an option to one of the drop down fields but do not want to re-distribute the form due to reporting purposes. How can I do this?
You can open the form in Acrobat, select "File > Save a Copy", open the copy you just saved (it doesn't happen automatically), edit the dropdown to add the new item, save as a new file, and then Reader-enable the file by selecting: File > Save As Other > Reader Extended PDF > Enable More Tools. The resulting PDF should work with FormsCentral just like the original.
-
Made preference changes, but still getting the Ram preview needs 2 or more frames to play back.
I'm new to After Effects CS6 and am working on a very simple Kinetic Typography project. I don't have a lot of memory, but this is a really simple project, so I'm wondering if maybe I'm just not using the work area correctly. Every once in while I can get the project to RAM preview, but only for a few seconds. Most of the time I get the "Ram preview needs 2 or more frames to play back" error message. I have pasted my sytem info and setting info bleow. Thanks for any insight!
I have checked the Render Multiple Fames Simultaneously box and have set the seetings at:
Here is the info when you click on details:
Installed RAM: 4.00 GB
Current RAM Usage: 0.00 GB
Allowed RAM Usage: 2.50 GB
Process ID
Application Name
Min Needed Memory
Max Usable Memory
Max Allowed Memory
Current Memory
Current Priority
3081
After Effects
0.00
0.00
2.50
0.00
3 - Low
System info:
System Version: Mac OS X 10.6.8 (10K549)
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2.2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GBWhat exact version of After Effects?
Show a screenshot of your TImeline panel and Preview panel when the problem occurs.
Make sure that we can see the details in your screenshot. Your current screenshot is unreadable because it's so small. -
How to add few more columns in UWL screen
Hi all
Currently by default we are able to see the columns in UWL header as "Subject", "From", "Sent Date" , "Due Date" , "Status" .
now i want to add few more columns apart from standard columns.
can you please let me know how to add our own columns in UWL header ?? if it is XML changes then pls let me know which xml file exactly we need to change??
Thanks
SunilHi Harini
actually Standard XML file is not necessary for changing the column names in the UWL .
we can use otherway as follows.
go to system admin->UWL administration->click to configure item types and custom views using a wizard then it will take you to another screen -> select the radio button "Customize the look of the UWL main page" click on next then you can select what ever task item you want to change and click on the button respective button at the right end then it will take you to new screen there i added new columns what ever required and saved also but the same one is not reflecting in UWL....
can you please check the same in ur machine and let me know if any other things are required to be done and why this not been done our requirement??
Regards
Sunil -
How to add new item in more options dialog box
Hi all,
Can anyone tell me how to add new item in more options dialog box(site actions -> more options). I want to add new item there to the new page layout which I created but I didn't find any way to do it. can anyone assist me for this.Good point, in order to add a Page into that area, you will need to define a Custom Action. You can learn more about creating Custom Actions here:
http://msdn.microsoft.com/en-us/library/hh500259(v=office.14).aspx
As an example, Microsoft uses the following Custom Action to add the "Publishing Page" to that Create Silverlight control when enabling the Publishing features:
<CustomAction
Id="CreatePublishingPage"
GroupId="WebPages"
Location="Microsoft.SharePoint.Create"
Sequence="100"
Title="$Resources:cmscore,Create_WebPages_PublishedPage;"
Description="$Resources:cmscore,Create_WebPages_PublishedPage_Description;"
ImageUrl="/_layouts/images/ltpp.png">
<UrlAction Url="_Layouts/CreatePage.aspx" />
</CustomAction>
Dimitri Ayrapetov (MCSE: SharePoint) -
In the app I have used 4.25GB of 5GB Do I need to purchase more storage?
My photo stream has stopped working It is greyed out so I cannot check it I have used 4.25GB of 5GB Do I need to purchase more storag
Where is the Photo Stream greyed out? In iPhoto on your Mac? Online? ???
This is from Apple's document iCloud: Purchasing iCloud storage and billing
Summary
iCloud customers are provided with 5 GB of free cloud storage. Purchased music, movies, TV shows, apps, and books, as well as photos in your Photo Stream don't count against your 5 GB of free storage.
It's used for:
your mail, documents, account information, and the iOS settings and app data that are automatically backed up by iCloud. - from: iCloud: Check available email storage
You can change your iCloud email account preferences (under Mailbox behaviors and Advanced) to not store deleted messages online and other changes to reduce the space usage.
OT -
I have the title creation macro working.
This macro is run from a Microsoft Word document. I wrote it on Office 2003 but it should work on newer versions. It runs on 2003 because I have the compatibility pack.
Here is how it works:
You create a title in Premiere Pro using the font and positioning that you want to use. Get it just right. (One line of text only though.)
Change the text of the title to "xyz" without the quotes.
Export the title as a title. (*.prtl)
Open the MS Word document and either type in the text you want to use or paste it in from another document.
I limited it to 9999 titles but I doubt that will inconvenience anyone. (I actually only tested it to 9990). That many titles takes quite a while though. (55 minutes) Heck, it takes quite a while to import that many into Premiere Pro for that matter.
Once you have the text in place (make sure that there isn't a blank line at the end or you will get an empty title), you just double-click where it says to double-click.
It will ask you which is the master file you want to make copies of. Then it will ask you for the file name and location you want to use for the copies. It will append the numbers 0001 through 9999
Then it proceeds to make your copies using each line of text for a new title.
When it is finished, just import the titles into Premiere Pro and drag drop to the timeline. Or automate to sequence.
Deceptively simple. I didn't write much of the code. I understand it, but only after studying what was kindly given to me by a master VBA guy on a VBA forum. Kind of like if you were a newbie around here and Jim Simon or Ann Bens offered to edit your video for you after you asked a question. It was phenomenal. Although it might have been more like what I did for the people I created intros for. Not sure just how much effort he had to put into it. But it sure works great and the code is simple, and clean.
OK? So now I need a few beta testers before I just throw it out there to the world of Premiere Pro users. If you would like to take it for a test drive, let me know in this thread.
If you are concerned about letting a macro run on your system, prevent it from running and just read the text from the Visual Basic Editor yourself. You will see that it doesn't do anything sinister.Then allow it the next time.
Just do me one favor. If you change the code to make it better, please share it with everyone.
Thanks,
Steven Gotz
http://www.stevengotz.comReally? 272 views of this post at the time I write this and nobody wants to create multiple titles based on a single title using text from an external program?
Wow!
We see the question all the time, and yet nobody wants to try it out?
OK. I will just wait until somebody asks again and offer the untested solution. Seriously, this is not the response I expected. Not after years of seeing requests for this feature.
Maybe you are looking for
-
This computer in no longer authorized for purchased items
this computer in no longer authorized for purchased items,this is error on my computer,than my iphone dont connect tu computer thx for help
-
Placing a Pshop .eps into .ai and then placing in InDesign...?
Our Art Department is starting to use InDesign more and more after being mainly Illustrator for years. I'm doing some experiments to see how InDesign will fit into our existing processes. Basically I'm trying to figure out a way to get Illustrator ar
-
I need to change the hard drive, some help please ?
My sister's G3 iBook hard drive seems to have died. She want me to replace it for her. My question, where can I get a replacement ? I know drives come in different capacities, 10, 20, 250Gigs's etc. But are all notebook drives the same physical size
-
Accounting Period is null in R12 GL Budget
Hello all, I am doing budgeting setup in R12. I Defined the Budgeting and created Organization. While entering the Budget amount, I can select Budget and Budget organization but Accounting Periods from fields having no records. Its saying that, FRM-4
-
Warum geht das nicht wenn ich mich beim i tunes store anmelde
waarum geht es nicht mich beim i tunes store anzumelden