Global device issue in sun cluster3.2

In my 2 node cluster (sun cluster3.2) running on x86 VMs. One of my nodes VM1 does not have the global devices populated due to which i cannot failover my file system to node VM1 , what could be the reason for this and how can i rectify it ?
VM1:/>cd /dev/global
-bash: cd: /dev/global: No such file or directory
VM1:/>
VM2:/>cd /dev/global
VM2:/dev/global>ls
admin dsk    rdsk   rmt
VM2:/dev/global>
VM2:/>clnode status
=== Cluster Nodes ===
--- Node Status ---
Node Name                                       Status
VM2                                             Online
VM1                                             Online
VM2:/>clq status
=== Cluster Quorum ===
--- Quorum Votes Summary from latest node reconfiguration ---
            Needed   Present   Possible
            2        3         3
--- Quorum Votes by Node (current status) ---
Node Name       Present       Possible       Status
VM2             1             1              Online
VM1             1             1              Online
--- Quorum Votes by Device (current status) ---
Device Name       Present      Possible      Status
d3                1            1             Online
VM2:/>cldev status
=== Cluster DID Devices ===
Device Instance               Node              Status
/dev/did/rdsk/d2              VM1               Ok
                              VM2               Ok
/dev/did/rdsk/d3              VM1               Ok
                              VM2               OkEdited by: fugitive on Dec 8, 2009 5:58 PM

Can you check whether all the cluster SMF services are online on VM1?
# svcs -xv
-Venku

Similar Messages

Perfomance issue between Sun-Fire-V445 & SUNW,T5240

my application owners is complaining abt the perfomance issue with between V445 and T5240
5.10 Generic_118833-33 sun4u sparc SUNW,Sun-Fire-V445
bash-3.00$ psrinfo
0 on-line since 01/10/2009 01:55:45
1 on-line since 01/10/2009 01:55:45
2 on-line since 01/10/2009 01:55:45
3 on-line since 01/10/2009 01:55:42
bash-3.00$ top
load averages: 0.96, 1.11, 1.14; up 101+15:04:35 16:59:45
237 processes: 231 sleeping, 5 zombie, 1 on cpu
CPU states: % idle, % user, % kernel, % iowait, % swap
Memory: 32G phys mem, 21G free mem, 2052M swap, 2052M free swap
but t5240 is having 128 processor and
load averages: 0.56, 0.33, 0.27 tbw1.prod1.idc1.level3.com 17:01:53
58 processes: 57 sleeping, 1 on cpu
CPU states: % idle, % user, % kernel, % iowait, % swap
Memory: 128G real, 57.0G free, 697M swap in use, 51.7G swap free
both the application are on zones. But the processing time for the app is less in v445 when compared to t5240

System Configuration: Sun Microsystems sun4u Sun Fire V445
System clock frequency: 199 MHZ
Memory size: 32GB
==================================== CPUs ====================================
E$ CPU CPU
CPU Freq Size Implementation Mask Status Location
0 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C0/P0
1 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C1/P0
2 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C2/P0
3 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C3/P0
================================= IO Devices =================================
System Configuration: Sun Microsystems sun4v T5240
Memory size: 130848 Megabytes
================================ Virtual CPUs ================================
CPU ID Frequency Implementation Status
0 1165 MHz SUNW,UltraSPARC-T2+ on-line
1 1165 MHz SUNW,UltraSPARC-T2+ on-line
2 1165 MHz SUNW,UltraSPARC-T2+ on-line
3 1165 MHz SUNW,UltraSPARC-T2+ on-line
4 1165 MHz SUNW,UltraSPARC-T2+ on-line
5 1165 MHz SUNW,UltraSPARC-T2+ on-line
6 1165 MHz SUNW,UltraSPARC-T2+ on-line
7 1165 MHz SUNW,UltraSPARC-T2+ on-line
8 1165 MHz SUNW,UltraSPARC-T2+ on-line
9 1165 MHz SUNW,UltraSPARC-T2+ on-line
10 1165 MHz SUNW,UltraSPARC-T2+ on-line
11 1165 MHz SUNW,UltraSPARC-T2+ on-line
12 1165 MHz SUNW,UltraSPARC-T2+ on-line
13 1165 MHz SUNW,UltraSPARC-T2+ on-line
14 1165 MHz SUNW,UltraSPARC-T2+ on-line
15 1165 MHz SUNW,UltraSPARC-T2+ on-line
16 1165 MHz SUNW,UltraSPARC-T2+ on-line
17 1165 MHz SUNW,UltraSPARC-T2+ on-line
18 1165 MHz SUNW,UltraSPARC-T2+ on-line
19 1165 MHz SUNW,UltraSPARC-T2+ on-line
20 1165 MHz SUNW,UltraSPARC-T2+ on-line
21 1165 MHz SUNW,UltraSPARC-T2+ on-line
22 1165 MHz SUNW,UltraSPARC-T2+ on-line
:

Cluster /global/devices/node@X mount problem.

Hi,
I have just installed sun cluster 3.2. It is a simple installtion and cluster contains only two servers and one sun storage.
After installation, i realised that the name of the metadevice on tha servers were the same, so only one of them mounted under /global/devices/node@X, and the other were didn't.
Then i re-create metadevice on the second node with another name. After re-creation /global/devices/node@X
fs weren't mounted, when node were rebooted.
there was various error on the console, but i couldn't resolve that problem.
I can mount global/devices/node@X with mount command. But it's not mounted automaticaly in reboot time.
# mount global/devices/node@X is running perfectly.
The error shown in reboot time are as follows;
The /global/.devices/node@2 file system (/dev/rlofi/1) is being checked.
WARNING - Unable to repair the /global/.devices/node@2 filesystem. Run fsck
manually (fsck -F ufs /dev/rlofi/1).
Mar 18 13:35:12 svc.startd[8]: svc:/system/cluster/scmountdev:default: Method "/usr/cluster/lib/svc/method/scmountdev start" failed with exit status 32.
The /global/.devices/node@2 file system (/dev/rlofi/1) is being checked.
WARNING - Unable to repair the /global/.devices/node@2 filesystem. Run fsck
manually (fsck -F ufs /dev/rlofi/1).
Mar 18 13:35:12 svc.startd[8]: svc:/system/cluster/scmountdev:default: Method "/usr/cluster/lib/svc/method/scmountdev start" failed with exit status 32.
The /global/.devices/node@2 file system (/dev/rlofi/1) is being checked.
WARNING - Unable to repair the /global/.devices/node@2 filesystem. Run fsck
manually (fsck -F ufs /dev/rlofi/1).
Mar 18 13:35:12 svc.startd[8]: svc:/system/cluster/scmountdev:default: Method "/usr/cluster/lib/svc/method/scmountdev start" failed with exit status 32.
mount: I/O error
mount: Cannot mount /dev/lofi/126
lofiadm: could not unmap device /dev/lofi/126: No such device or address
mount: I/O error
mount: Cannot mount /dev/lofi/126
lofiadm: could not unmap device /dev/lofi/126: No such device or address
WARNING: Cluster startup could not remove the existing
lofi device associated with /.globaldevices. Try manually
removing the device association. Global devices will
be unavailable until this error is fixed.
Mar 18 13:36:10 tstclstr1 svc.startd[8]: system/cluster/globaldevices:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Mar 18 13:36:10 tstclstr1 Cluster.CCR: /usr/cluster/bin/scgdevs: Filesystem /global/.devices/node@2 is not available in /etc/mnttab.
Mar 18 13:36:10 tstclstr1 last message repeated 1 time
Mar 18 13:38:50 tstclstr1 svc.startd[8]: platform/sun4u/dscp:default failed: transitioned to maintenance (see 'svcs -xv' for details)
The output of the svcs -xv;
root@tstclstr1 # svcs -xv
svc:/system/cluster/globaldevices:default (Suncluster globaldevices service)
State: maintenance since 18 Mart 2010 Perşembe 13:36:10 EET
Reason: Start method exited with $SMF_EXIT_ERR_CONFIG.
See: http://sun.com/msg/SMF-8000-KS
See: /var/svc/log/system-cluster-globaldevices:default.log
Impact: 3 dependent services are not running:
svc:/system/cluster/mountgfs:default
svc:/system/cluster/clusterdata:default
svc:/system/cluster/ql_rgm:default
svc:/application/print/server:default (LP print server)
State: disabled since 18 Mart 2010 Perşembe 13:34:46 EET
Reason: Disabled by an administrator.
See: http://sun.com/msg/SMF-8000-05
See: man -M /usr/share/man -s 1M lpsched
Impact: 2 dependent services are not running:
svc:/application/print/rfc1179:default
svc:/application/print/ipp-listener:default
svc:/system/cluster/scmountdev:default (Sun Cluster scmountdev)
State: maintenance since 18 Mart 2010 Perşembe 13:35:12 EET
Reason: Start method failed repeatedly, last exited with status 32.
See: http://sun.com/msg/SMF-8000-KS
See: /etc/svc/volatile/system-cluster-scmountdev:default.log
Impact: This service is not running.
svc:/system/cluster/scsymon-srv:default (Sun Cluster SyMON Server Daemon)
State: offline since 18 Mart 2010 Perşembe 13:34:49 EET
Reason: Dependency svc:/application/management/sunmcagent:default is absent.
See: http://sun.com/msg/SMF-8000-E2
Impact: This service is not running.
svc:/platform/sun4u/dcs:default (domain configuration server)
State: maintenance since 18 Mart 2010 Perşembe 13:38:51 EET
Reason: Restarting too quickly.
See: http://sun.com/msg/SMF-8000-L5
See: man -M /usr/share/man -s 1M dcs
See: /var/svc/log/platform-sun4u-dcs:default.log
Impact: This service is not running.
svc:/platform/sun4u/dscp:default (DSCP Service)
State: maintenance since 18 Mart 2010 Perşembe 13:38:50 EET
Reason: Start method failed repeatedly, last died on Killed (9).
See: http://sun.com/msg/SMF-8000-KS
See: man -M /usr/share/man -s 1M prtdscp
See: /var/svc/log/platform-sun4u-dscp:default.log
Impact: This service is not running.
{noformat}root@tstclstr1 #
</pre>{noformat}

Thanks for the reply,
It used to be the same metaset name on the second server, which several folks have run into when installing SC on the 2nd node. So I renamed it when booted into no cluster mode using metarename. I then updated the /etc/vfstab with the new name, this is it in /etc/vfstab:
/dev/md/dsk/d26 /dev/md/rdsk/d26 /global/.devices@2 ufs 2 no global
And yes if I change "global" to "-" then it mounts. When the 2nd node boots up, it cannot mount /global/.devices@2 with it set to global so the boot halts, I do ctrl-D to continue. Then I try a regular mount from root and I get the "no such file or directory" message.
If I do a metastat d26 it shows it to be OK on both submirrors.
The name of the metadisk on the first node is d160. And the 2nd server is able to mount that from the global option on the first server.
Thanks,

Solaris Cluster and Global Devices for sapmnt

Hi,
IHAC that is considering using Global Devices for /usr/sapmnt in a SAP environment, since they need all SAP nodes looking for the same sapmnt area. Is this a recommended approach?
Generally, we are working with S11.1/Solaris Cluster 4.1 to implement Netweaver 7.2 and ERP 6.0.
I appreciate your comments.
Regards, Rafael.

Hi Rafael,
/usr/sapmnt is a file system, as such I assume when you ask about usage of global devices you really mean to ask about using a global file system (ie. an UFS file system with mount option global)?
If that is true, then the answer is yes.
The data service guide for SAP NetWeaver (http://docs.oracle.com/cd/E29086_01/html/E29440/installconfig-10.html#installconfig-34) does mention in the section "configuration considerations":
"The SAP enqueue server and SAP replica server run on different cluster nodes. Therefore, the SAP application files (binary files, configuration files, and parameter files) can be installed either on the global file system or on the local file system. However, the application files for each of these applications must be accessible at all times from the nodes on which these applications are running."
And the deployment example in the appendix (http://docs.oracle.com/cd/E29086_01/html/E29440/gmlbt.html#scrolltoc) makes use of a global mounted /sapstore file system.
Regards
Thorsten

Confused about the /global/.devices/node@1 filesystem

This is the first cluster I have tried to build on Vmware with two shared scsi virtual disks.
The above filesystem appears on both nodes, but there is none called /global/.devices/node@2 visible.
The shared storage ( scsi ) does not work , if I create a file on one node it is invisible on the other and vice versa.
But If I put a file in /global/.devices/node@1 on one node I can see it on the other. But I thought /global/.devices/node@1 was a LOCAL filesystem.
I have trawled through lots of documentation , but nothing seems to give me any answers.
Can anyone give me an explanation or refer me to any docs relevant to this. Thanks !
George

Simple question.
Should I see a mounted filsesystem of /global/.devices/node@2 on the other node ? Does the absense of this indicate a problem ??
Now getting the following error when trying to configure ha-nfs.
The shared disks are definately visible to the operating system on both nodes :
## Define File-System Mount Point ##
Default Mount Directory: /shared
Raw-Device Path: /dev/did/rdsk/d2s0
ERROR: The raw-device path that you specified is not accessible from all
nodes that can master the highly available storage resource. Specify a
different path, change the nodes that can master the highly available
storage resource, or add the missing nodes to the node list of the device.
George

Hi ... Suddenly I have this problem with my iPhone4 . Whenever I am dialling or receiving calls, I am not audible at the other end , but if I am putting phone on speaker then I am audible to other person .Not sure if any setting is changed or device issue

Hi ... Suddenly I have this problem with my iPhone4 . Whenever I am dialling or receiving calls, I am not audible at the other end , but if I am putting phone on speaker then I am audible to other person .Not sure if any setting is changed or device issue. Please suggest or help.

There's an Apple help page on the DNS problem - at http://support.apple.com/kb/TS3408
The first thing to try is changing your DNS settings - and for that you need to open System Preferences, then the
Network section.
In Network - click on Advanced - then the DNS tab
under DNS servers - use the + button to enter two extra lines
either these, from google dns
8.8.8.8
8.8.4.4
or from OpenDNS
208.67.222.222
208.67.220.220
then click OK & then 'Apply'
You would need to do that seperately for the Cable (Ethernet) settings and Wireless (Airport)

Issue with Sun Webserver 7

Hi
I am facing issue with sun webserver7.0. I installed 64 bit version of sun webserver 7 on solaris 64 bit machine.
I added my NSAPI extension to it. And it works fine.
The problem i m facing is things are not consistance.. Like i configure my connector(nsapi extension) and request pageof that extension some time it comes and sometimes not.
when i restart web server things starts working fine. until my connector restart when it adds extension to it.
Also seen cases where the same page can be opened in IE cannt working in firefox.
i tried all possible cases. I still not able to figure out issue is in my connector or their is issue with web server 7 for 64 bit.
Thanks in advance.

I don't know about this but I will try.
1. Web Server's Web Container supports jsps.
2. Can you use simple redirects in obj.conf for the rest to forward your requests?
http://blogs.sun.com/elving/entry/regular_expression_redirects_in_7
http://blogs.sun.com/elving/entry/301_permanent_redirects_in_7
3. Or Can't you use reverse proxy to forward your requests?
http://blogs.sun.com/meena/entry/configuring_reverse_proxy_in_sun
4. I don't understand what you extensions do, if you want to simply register a file extension, can't adding new entry in mime.types work?
http://docs.sun.com/app/docs/doc/819-2630/6n4thbiet?a=view
"The MIME types file in the config directory contains mappings between the MIME types and file extensions."

NAC - Global Device Filter in OOB deployment

Hi,
Some help would be appriciated. I'm trying to bypass authentication/posture assessment for a printer in an OOB NAC deployment (CAM/CAS Version 4.9.0
I added the device MAC address in the global device filter, with the ALLOW access type set.
"Change VLAN according to global device filter list" option is checked in the port profile set on the corresponding switch port.
However, the device ends up in the Auth VLAN every time...
What am I missing?

Hi Tarik,
Yes, the port is managed and a test profile named 'Printer_test' is currently assigned to the port.
Here is what I see in the nac manager.log file (level set to debug) after the port comes up:
2012-01-24 14:41:08.219 +0100   DefaultUDPTransportMapping_0.0.0.0/162 DEBUG com.perfigo.wlan.web.sms.SnmpTrapListener          - Received trap event SwitchTrapEvent [type=LINK_UP switch_ip=10.1.0.32 mac=null port=10035 dot1dBasePort=0 vlan=0]
2012-01-24 14:41:08.219 +0100   DefaultUDPTransportMapping_0.0.0.0/162 DEBUG com.perfigo.wlan.web.sms.SnmpRunnable              - SnmpRunnable com.perfigo.wlan.web.sms.task.SwitchNotificationTask id=5091348 is created: SwitchTrapEvent [type=LINK_UP switch_ip=10.1.0.32 mac=null port=10035 dot1dBasePort=0 vlan=0]
2012-01-24 14:41:08.219 +0100   DefaultUDPTransportMapping_0.0.0.0/162 DEBUG com.perfigo.wlan.web.sms.SnmpManager               - Task from device 10.1.0.32 submitted with task id 5091348
2012-01-24 14:41:08.219 +0100   pool-3-thread-16 DEBUG com.perfigo.wlan.web.sms.SnmpRunnable              - SnmpRunnable com.perfigo.wlan.web.sms.task.SwitchNotificationTask id=5091348 starts run() after 0ms.
2012-01-24 14:41:08.219 +0100   pool-3-thread-16 DEBUG com.perfigo.wlan.web.sms.SnmpRunnable              - Resolved PortProfile Switch Port Profile [ id=4 name='Printer_test' type='normal' auth_vlan=100 access_vlan=15 idle_vlan=-1 attributes=635 vlan_profile_id=0 description='' reserved='' ] from event SwitchTrapEvent [type=LINK_UP switch_ip=10.1.0.32 mac=null port=10035 dot1dBasePort=0 vlan=0]
2012-01-24 14:41:08.220 +0100   pool-3-thread-16 INFO com.perfigo.wlan.web.sms.SnmpRunnable              - Received SNMP LINK_UP trap, but switch 10.1.0.32 is not using LINK_UP for task 5091348
2012-01-24 14:41:08.220 +0100   pool-3-thread-16 DEBUG com.perfigo.wlan.web.sms.SnmpRunnable              - Trap does not need to processed: SwitchTrapEvent [type=LINK_UP switch_ip=10.1.0.32 mac=null port=10035 dot1dBasePort=0 vlan=0] for task 5091348
2012-01-24 14:41:08.220 +0100   pool-3-thread-16 DEBUG com.perfigo.wlan.web.sms.SnmpRunnable              - SnmpRunnable com.perfigo.wlan.web.sms.task.SwitchNotificationTask id=5091348 ends run() after 1ms.
2012-01-24 14:41:08.220 +0100   pool-3-thread-16 DEBUG com.perfigo.wlan.web.sms.SnmpRunnable              - SnmpRunnable com.perfigo.wlan.web.sms.task.SwitchNotificationTask id=5091348 finishes after 1ms.

LSF & Sun Global Desktop Issue

Trying to bsub from Sun Global Desktop (Linux RHE 3) server to LSF cluster, but getting X connection to sgd:26.0 broken (explicit kill or server shutdown) when submitting jobs into LSF cluster.
Any thoughts on how to make this work?

well you can certainly run the SGD Client (TCC) without having to go through the browser.
http://docs.sun.com/source/820-1088/sgd_client.html
http://docs.sun.com/source/820-1088/sgd_client.html#args
to display the application in Seamless mode you do need to use the browser.
http://docs.sun.com/source/820-1088/seamless_windows.html
unfortunately you can not have both Seamless mode and no browser.

Droid 2 Global Dialer Issues

I just recently recieved my Droid 2 Global... at first things were working fine. Then my dialer stopped working.
When you touch the button to open it, a blank screen will pop up, and then it will go back to the home screen.
How can I fix this?!

vvmb,
Sorry you are having problems with accessing the dialer on your phone! I would be happy to assist!
This happens, usually, when there are too many applications running in the background. This would cause the applications to use up the devices RAM memory, resulting in pre-installed apps like the phone dialer not to work at times. I would first try "stopping any running applications" in the Applications Settings menu. Then I would "reset applications" that may be conflicting with the dialer. I would reset the "Dialer" application as well. As a last resort, you can perform a "Hard Reset" of your device to clean the device's onboard memory. This will not erase any data that is stored on your SD Memory Card, however, you want to ensure your data is backed up prior to performing the reset. Make sure you know your Google/Gmail login credentials, and if you use Backup Assistant, your Backup Assistant PIN.
Please post your results here to ensure other users experiencing the same issue can find a resolution.

New iMovie '08 problems -- FireWire or new device issues?

Not sure if this is an iMovie '08 problem or an OS X problem. Here's the story --
Prior camcorder was a Panasonic, MiniDV format. Hooks up nicely with iMovie, via FireWire (400). I also have a WD My Book (500 GB) device to store the raw data (Event Library), which connects via FireWire (800). In the past, all three devices (Panasonic, My Book and MacBook Pro) all played nicely together.
Fast forward to now. Bought a new camcorder (problems with the Panasonic). It's a Canon ZR950 (MiniDV). With iMovie running, I first connect the WD device which is successfully mounted. I then hookup the new Canon and within a few seconds I get an error about a "device not cleanly shut down" (or words to that effect). Odd .... and when I try to connect to my new camcorder, I get a "no camera connected" error.
Rebooted, retried .... same issues. Another time I first connected the Canon and this time, iMovie successfully sees it. I go to connect the My Book and then the camcorder drops out.
So, it seems I can have only one FireWire device connected at a time, which is odd since I didn't have this issue with the old Panasonic.
Help!

Interesting that you based your purchase on CR magazine because I too use it like a bible. However, when it comes to video cameras, I think they are way off base when not considering the editing side of video making that goes along with any camcorder. Who shoots video simply to plug it into a TV for playback?? If they were doing responsible reporting on this particular subject, they would also include computer capture and editing details in the reviews. Lots of the new format cams don't even work with Macs and the ones that do generally give lesser quality after conversion than what you can still get with tape. At least you made the right decision there!

Mac OS 10.4.10 and Tape Devices issues

Subject: [BRUServer-Announce] Mac OS X 10.4.10 Announcement...
I am posting this message out to the group for additional knowledge on
this issue..
We have a older G5 XServe with XRaid connected via Fibre Channel and an Adic
Scalar 100 LTO-2 tape unit connected via SCSI.
We have been seeing some issue with our tape unit lately and looking for
suggestions on a fix or work-a-round.
BRU suggest this:
<snip>
To resolve this issue, we strongly suggest that you downgrade to
10.4.8, as 10.4.9 has been known to exhibit the same type of symptoms.
<snip>
My question would be if we select to downgrade to Mac OS 10.4.8,
What would be the Best method to do downgrade to Mac OS 10.4.8 ?
Regards,
Roger Sinning
 PrePress System Administrator
Schmidt
Byron, MN 55920
schmidt
print solutions that deliver.
------ Forwarded Message
From: <[email protected]>
Reply-To: <[email protected]>
Date: Tue, 23 Oct 2007 17:32:54 -0700
To: <[email protected]>
Subject: [BRUServer-Announce] Mac OS X 10.4.10 Announcement...
Please do not reply to this message.
This list is for announcements only.
An Important Note for Mac Users of BRU Technology Under Mac OS X
Since the release of 10.4.10, there are a number of issues that have
surfaced with writing to tape and disk devices. For this reason,
10.4.10 is not compatible with tape devices connected to Mac OS X
10.4.10 via SCSI, FireWire, USB, SAS, or Fibre-Channel.
This is not a BRU Server software problem, but rather an Apple Mac OS
X problem when using any type of software that communicates with tape
devices.
Other problems with XRAID, Xsan, and other disk devices communicating
over these channels may also be realized.
http://www.attotech.com/troublemac.html
http://knowledgebase.tolisgroup.com/?View=entry&EntryID=47
http://support.overlandstorage.com/jive/entry!default.jspa?cateforyID=7&exte
rnalID=6041&fromSearchPage=true
http://www.google.com/search?hl=en&rls=en&q=10.4.10backup+tapeissues&btnG=
Search
To resolve this issue, we strongly suggest that you downgrade to
10.4.8, as 10.4.9 has been known to exhibit the same type of symptoms.
We apologize that we did not make the announcement sooner, however, we
believed that 10.4.11, which fixes this problem, would be released
much sooner than now. As of this announcement, 10.4.11 has yet to be
released, nor has there been an announcement for its expected release
date.

an update on my client's situation:
os: server 10.4.11
scsi card: LSILogic Ultra320, 1.3.39.0 firmware
tape: exabyte 1x10 library, vxa172 tape drive
after a reboot, but still running 10.4.10, the tape drive appeared on the SCSI bus.
after installing the 10.4.11 update, the OS can't see the tape drive, but the library is. basically, that's no different than before the update.
does anyone have any ideas on how to scare the drive into reappearing? would unloading/reloading kexts help? the library is basically useless without the tape drive reliably recognized by the SCSI card.

ASA 5510 Remote Access iOS devices issue

I'm having a weird issue that just cropped up in the last week or so. Previously, ipads and iphones were working fine on our IPSec VPN, but now they don't work at all.
The iOS device throws one of two errors:
1. "Negotiation with the VPN server failed." (asks for user and pass first, then gives this error after about 30 seconds)
2. "The VPN server did not repond." (might just be intermittnet 3G network I'm testing over)
If the error is #1, the ASA says this:
tacacs+ and aaa debug:
user: testuser
Tacacs packet sent
Sending TACACS Start message. Session id: 11763, seq no:1
Received TACACS packet. Session id:1263956303 seq no:2
tacp_procpkt_authen: GETPASS
mk_pkt - type: 0x1, session_id: 11763
mkpkt_continue - response: ***
Tacacs packet sent
Sending TACACS Continue message. Session id: 11763, seq no:3
Received TACACS packet. Session id:1263956303 seq no:4
tacp_procpkt_authen: PASS
TACACS Session finished. Session id: 11763, seq no: 3
crypto isakmp debug (Negotiation with the VPN server failed.):
Jun 11 15:09:57 [IKEv1]: IP = 174.232.18.200, IKE_DECODE RECEIVED Message (msgid=ad46fa43) with payloads : HDR + HASH (8) + DELETE (12) + NONE (0) total length : 80
Jun 11 15:09:57 [IKEv1 DEBUG]: Group = MobileDevices, Username = testuser, IP = 174.232.18.200, processing hash payload
Jun 11 15:09:57 [IKEv1 DEBUG]: Group = MobileDevices, Username = testuser, IP = 174.232.18.200, processing delete
Jun 11 15:09:57 [IKEv1]: Group = MobileDevices, Username = testuser, IP = 174.232.18.200, Connection terminated for peer testuser. Reason: Peer
Terminate Remote Proxy N/A, Local Proxy N/A
Jun 11 15:09:57 [IKEv1 DEBUG]: Group = MobileDevices, Username = testuser, IP = 174.232.18.200, IKE SA AM:b19cbbe4 terminating: flags 0x0941c801,
refcnt 0, tuncnt 0
Same error with a different debugging level and another tunnel group:
Jun 12 10:16:50 [IKEv1]: Group = Test_Tunnel_Group, Username = testuser, IP = 174.252.107.180, User (testuser) authenticated.
Jun 12 10:16:50 [IKEv1]: Group = Test_Tunnel_Group, Username = testuser, IP = 174.252.107.180, Assigned private IP address 10.1.50.175 to remote user
Jun 12 10:16:50 [IKEv1]: Group = Test_Tunnel_Group, Username = testuser, IP = 174.252.107.180, Forcing iPhone to host mask. <--is this forcing the mask to 255.255.255.255 because the iphone requires that?
If the error is #2, the ASA says this:
Jun 11 15:13:18 [IKEv1]: IP = 174.232.18.200, Connection landed on tunnel_group MobileDevices
I've changed a lot of settings, but I haven't gotten anywhere. I've tried different tunnel groups and connection profiles. This setup works fine on a Windows computer with the Cisco VPN Client (5.0.07). ASA is running 8.2(5), split tunnel, no pfs, group name and psk, tried with and without peer ID validation, NAT-T (udp 500, 4500).
Any ideas? Thanks in advance.

Solved.
Static Nat is solution.
I have created rule as follows:
nat (inside,outside) source static 192.168.1.0_24 2.2.2.2 destination static 172.16.1.0_24 172.16.1.0_24 no-proxy-arp

Portal On Device Issue

Hi All
I am on portal 7.3 ehp1 sp 07.
We are getting ready to go live with a portal on device implementation and I am having a fairly big issue.
I have developed a number of apps using bsp and jquery mobile 1.3.1.
My problem is that the page height is not re-adjusting to the view area.
For example I have a search, list and detail page.
When I go from search, to list, the height re-adjusts i.e. from small page to large list page. The list page is the correct height and it has a scroll bar.
The problem is that when I go from a large list page to a small detail page, the view area remains large, the scroll area does not re-adjust.
If I scroll down and click the last item in the list, the detail page is loaded but the scroll bar on the side remains at the same position and I have to manually scroll to the top of the page. I would expect the scroll bar to dissapear.
In order for me to view the detail page, I have to scroll to the top of the page.
The problem is that the scroll area does not re-adjust to the smaller detail screen and I have to scroll back up to the top to see the details.
I have implemented note 1832376, with no luck. My apps are portal pages with a bsp iview and smartphone layout.
Please, can someone give me some advice on this
I am testing on Iphone and Ipad with ios 7.
Many thanks
Darren

Hi Samuli
Thanks for replying. An upgrade from 7.3 to 7.31 is not a viable solution for us, we are getting ready to go live with this.
I need a workaround.
Any workarounds or portal events that I can call that I will force a portal page to scroll to the top.
I have tried document.scrollto etc from javascript. They work fine when I preview the page in portal but not when incorporated into portal on device.
Thanks
Darren

WebLogic 12c Global JNDI issue

I'm using WebLogic to deploy our application and we have a standalone application to invoke remote EJB, so we use global jndi.
format:
java:global/[<application-name>]/<module-name>/<bean-name>!<fully-qualified-bean-interface-name>
Here is some description about the global JNDI
1.<aplication-name> defaults to the bundle name (.ear file name) without the bundle extension. This can be overridden in application.xml. Also, <application-name> is applicable only if the bean is packaged inside a .ear file.
2.<module-name> defaults to bundle name (.war or .jar) without the bundle extension. Again, this can be overridden in ejb-jar.xml.
3.<bean-name> defaults to the unqualified class name of the bean. However, if @Stateful or @Stateless or @Singleton uses the name attribute, then the value specified there will be used as the bean name.
But when I deploy our ear to webogic by autodeploy, weblogic just doesn't obey this rule, the application-name was generated by weblogic, not from application.xml in ear. This cause our standalone application need to configure the application-name if we want to keep compatible with JBoss 7.
Why doesn't weblogic use the application-name from application.xml? Is this an issue?

In the EAR file deployed what is the application-name in application.xml generated by Maven?
Is <generateApplicationXml>true</generateApplicationXml>?

Global device issue in sun cluster3.2

Similar Messages

Maybe you are looking for