Global - MathScript Node Failed To Compile Error

I have Labview 2009 SP1 with Mathscript Module.
While using 'global' command, I've encountered "MathScript Node Failed To Compile Error" from the first time I tried it. 
In Mathscript window:
'Error in line 0:  An internal error occurred while processing this MathScript. Contact National Instruments with the MathScript you used.'
is produced for any simple 'global a' (or any other variable name used).

Opps, one step you missed in the error code: Contact National Instruments with the Mathscript you used.
Go ahead and attach some example code that is throwing this error and I'll see if I can reproduce it on this end. There were a bunch of updates to the Mathscript Node in the F3 Patch so make sure that or LabVIEW 2009 SP1 is installed.
Also, are you seeing this on any other computers?
Look forward to hearing back!
Logan H
National Instruments
Applications Engineer

Similar Messages

  • ILM First Time Installation Fails with compilation errors

    I am using database version 10.1.0.4.2, and Apex version 3.0.0.00.20,
    These both are on the same machine.
    I login with sqlplus as sysdba and run
    @ilma_install apex sysaux none
    Following happens after running it:
    - It runs for a while creating different objects
    - then gives warning : view created with compilation error
    - then gives warning : view created with compilation error
    - then gives warning : view created with compilation error
    - then runs for a while
    - then gives error Package body created with compilation errors
    Errors for package body ILM_SYS_TOOLKIT
    Line/col Error
    1646/3 PLSQL: SQL Statement Ignored
    1647/22 PLS-009050 : Object ILM_Toolkit.ILM_Schedular_Steps is invalid
    Then the installation terminates.
    Please help.
    regards

    I am sorry to hear that you are still having difficulties with the installation. I set up a system that is as close to your configuration as I could replicate, with a 10gR1 database and Apex 3.0, and did not have any issue installing the ILM Assistant.
    It is possible that your install kit may have been corrupted during the modifications. I could build a new kit with the proper changes for your setup and send this directly to you if you would like.
    Alternatively, the problem may be with your Application Express installation. Try to verify that this was installed properly, and that the underlying schema account (FLOWS_030000) is unlocked and that you are using its proper password when installing ILM.
    Thanks,
    Adam

  • Application Deployment in Managed Node Failed with the error - ERROR   - Caught exception while looking up Connection Factory with JNDI Name: java:comp/env/eis/PRAdapterConnectionFactory, javax.naming.ServiceUnavailableException [Root exception is java.ne

    2013-06-24 21:16:28,551 [bxapp2.healthnet.com] [  STANDARD] [                    ] (l.access.RuleCandidateIterator) INFO    - Single candidate rule resolution optimization is enabled
    Error retrieving JNDI initial context:
    2013-06-24 21:16:28,952 [bxapp2.healthnet.com] [  STANDARD] [                    ] (    pegarules.resadap.RAClient) ERROR   - Caught exception while looking up Connection Factory with JNDI Name: java:comp/env/eis/PRAdapterConnectionFactory, javax.naming.ServiceUnavailableException [Root exception is java.net.UnknownHostException: Unknown protocol: 'TCP']
    javax.naming.ServiceUnavailableException [Root exception is java.net.UnknownHostException: Unknown protocol: 'TCP']
    at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:34)
    at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:787)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:368)
    at weblogic.jndi.Environment.getContext(Environment.java:315)
    at weblogic.jndi.Environment.getContext(Environment.java:285)
    at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
    at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
    at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
    at javax.naming.InitialContext.init(InitialContext.java:223)
    at javax.naming.InitialContext.<init>(InitialContext.java:175)
    at com.pega.pegarules.priv.util.JNDIUtil.getInitialContext(JNDIUtil.java:106)
    at com.pega.pegarules.priv.util.JNDIUtil.lookupUsingRealContextClassLoader(JNDIUtil.java:128)
    at com.pega.pegarules.resadap.RAClient.init(RAClient.java:102)
    at com.pega.pegarules.resadap.RAClient.<init>(RAClient.java:84)
    at com.pega.pegarules.resadap.RAClientContainer.get(RAClientContainer.java:47)
    at com.pega.pegarules.session.internal.async.BatchUtils.callRAClient(BatchUtils.java:146)
    at com.pega.pegarules.integration.engine.internal.services.listener.ListenerWrapper.callRAClient(ListenerWrapper.java:358)
    at com.pega.pegarules.integration.engine.internal.services.listener.ListenerWrapper.launchListener(ListenerWrapper.java:233)
    at com.pega.pegarules.integration.engine.internal.services.listener.ListenerStateManagerImpl.startOneListener(ListenerStateManagerImpl.java:713)
    at com.pega.pegarules.integration.engine.internal.services.listener.ListenerStateManagerImpl.startServiceTypeListeners(ListenerStateManagerImpl.java:464)
    at com.pega.pegarules.integration.engine.internal.services.listener.ListenerStateManagerImpl.startListenerType(ListenerStateManagerImpl.java:423)
    at com.pega.pegarules.integration.engine.internal.PRIntegrationEngineProviderImpl.initServices(PRIntegrationEngineProviderImpl.java:166)
    at com.pega.pegarules.session.internal.mgmt.PREnvironment.initServices(PREnvironment.java:620)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.pega.pegarules.session.internal.PRSessionProviderImpl.doWithRequestorLocked(PRSessionProviderImpl.java:1043)
    at com.pega.pegarules.session.internal.PRSessionProviderImpl.doWithRequestorLocked(PRSessionProviderImpl.java:765)
    at com.pega.pegarules.session.internal.mgmt.PREnvironment.finishInit(PREnvironment.java:522)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.pega.pegarules.session.internal.PRSessionProviderImpl.doWithRequestorLocked(PRSessionProviderImpl.java:1043)
    at com.pega.pegarules.session.internal.PRSessionProviderImpl.doWithRequestorLocked(PRSessionProviderImpl.java:765)
    at com.pega.pegarules.session.internal.mgmt.PREnvironment.getThreadAndInitialize(PREnvironment.java:379)
    at com.pega.pegarules.session.internal.PRSessionProviderImpl.getThreadAndInitialize(PRSessionProviderImpl.java:1516)
    at com.pega.pegarules.session.internal.engineinterface.etier.impl.EngineStartup.initEngine(EngineStartup.java:619)
    at com.pega.pegarules.session.internal.engineinterface.etier.impl.EngineImpl._initEngine_privact(EngineImpl.java:165)
    at com.pega.pegarules.session.internal.engineinterface.etier.impl.EngineImpl.doStartup(EngineImpl.java:138)
    at com.pega.pegarules.session.internal.engineinterface.etier.ejb.EngineBean.doStartup(EngineBean.java:120)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethod(PRBootstrap.java:349)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethodPropagatingThrowable(PRBootstrap.java:390)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethodPropagatingException(PRBootstrap.java:412)
    at com.pega.pegarules.internal.etier.ejb.EngineBeanBoot.doStartup(EngineBeanBoot.java:130)
    at com.pega.pegarules.internal.etier.ejb.EngineBMT_h449u3_ELOImpl.doStartup(EngineBMT_h449u3_ELOImpl.java:124)
    at com.pega.pegarules.web.servlet.WebAppLifeCycleListener._contextInitialized_privact(WebAppLifeCycleListener.java:259)
    at com.pega.pegarules.web.servlet.WebAppLifeCycleListener.contextInitialized(WebAppLifeCycleListener.java:167)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethod(PRBootstrap.java:349)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethodPropagatingThrowable(PRBootstrap.java:390)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethod(PRBootstrap.java:439)
    at com.pega.pegarules.internal.web.servlet.WebAppLifeCycleListenerBoot.contextInitialized(WebAppLifeCycleListenerBoot.java:83)
    at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1863)
    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126)
    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512)
    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
    at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
    at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
    at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.net.UnknownHostException: Unknown protocol: 'TCP'
    at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:216)
    at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:197)
    at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:238)
    at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:200)
    at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
    at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:353)
    ... 94 more
    2013-06-24 21:16:28,952 [bxapp2.healthnet.com] [  STANDARD] [                    ] (tener.ListenerStateManagerImpl) ERROR   - Unexpected exception.
    java.lang.NullPointerException
    at com.pega.pegarules.session.internal.async.BatchUtils.callRAClient(BatchUtils.java:150)
    at com.pega.pegarules.integration.engine.internal.services.listener.ListenerWrapper.callRAClient(ListenerWrapper.java:358)
    at com.pega.pegarules.integration.engine.internal.services.listener.ListenerWrapper.launchListener(ListenerWrapper.java:233)
    at com.pega.pegarules.integration.engine.internal.services.listener.ListenerStateManagerImpl.startOneListener(ListenerStateManagerImpl.java:713)
    at com.pega.pegarules.integration.engine.internal.services.listener.ListenerStateManagerImpl.startServiceTypeListeners(ListenerStateManagerImpl.java:464)
    at com.pega.pegarules.integration.engine.internal.services.listener.ListenerStateManagerImpl.startListenerType(ListenerStateManagerImpl.java:423)
    at com.pega.pegarules.integration.engine.internal.PRIntegrationEngineProviderImpl.initServices(PRIntegrationEngineProviderImpl.java:166)
    at com.pega.pegarules.session.internal.mgmt.PREnvironment.initServices(PREnvironment.java:620)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.pega.pegarules.session.internal.PRSessionProviderImpl.doWithRequestorLocked(PRSessionProviderImpl.java:1043)
    at com.pega.pegarules.session.internal.PRSessionProviderImpl.doWithRequestorLocked(PRSessionProviderImpl.java:765)
    at com.pega.pegarules.session.internal.mgmt.PREnvironment.finishInit(PREnvironment.java:522)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.pega.pegarules.session.internal.PRSessionProviderImpl.doWithRequestorLocked(PRSessionProviderImpl.java:1043)
    at com.pega.pegarules.session.internal.PRSessionProviderImpl.doWithRequestorLocked(PRSessionProviderImpl.java:765)
    at com.pega.pegarules.session.internal.mgmt.PREnvironment.getThreadAndInitialize(PREnvironment.java:379)
    at com.pega.pegarules.session.internal.PRSessionProviderImpl.getThreadAndInitialize(PRSessionProviderImpl.java:1516)
    at com.pega.pegarules.session.internal.engineinterface.etier.impl.EngineStartup.initEngine(EngineStartup.java:619)
    at com.pega.pegarules.session.internal.engineinterface.etier.impl.EngineImpl._initEngine_privact(EngineImpl.java:165)
    at com.pega.pegarules.session.internal.engineinterface.etier.impl.EngineImpl.doStartup(EngineImpl.java:138)
    at com.pega.pegarules.session.internal.engineinterface.etier.ejb.EngineBean.doStartup(EngineBean.java:120)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethod(PRBootstrap.java:349)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethodPropagatingThrowable(PRBootstrap.java:390)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethodPropagatingException(PRBootstrap.java:412)
    at com.pega.pegarules.internal.etier.ejb.EngineBeanBoot.doStartup(EngineBeanBoot.java:130)
    at com.pega.pegarules.internal.etier.ejb.EngineBMT_h449u3_ELOImpl.doStartup(EngineBMT_h449u3_ELOImpl.java:124)
    at com.pega.pegarules.web.servlet.WebAppLifeCycleListener._contextInitialized_privact(WebAppLifeCycleListener.java:259)
    at com.pega.pegarules.web.servlet.WebAppLifeCycleListener.contextInitialized(WebAppLifeCycleListener.java:167)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethod(PRBootstrap.java:349)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethodPropagatingThrowable(PRBootstrap.java:390)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethod(PRBootstrap.java:439)
    at com.pega.pegarules.internal.web.servlet.WebAppLifeCycleListenerBoot.contextInitialized(WebAppLifeCycleListenerBoot.java:83)
    at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1863)
    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126)
    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512)
    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
    at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
    at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
    at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    2013-06-24 21:16:28,956 [bxapp2.healthnet.com] [  STANDARD] [                    ] (          internal.async.Agent) INFO    - Agents will be executed via the enterprise tier.
    2013-06-24 21:16:28,956 [bxapp2.healthnet.com] [  STANDARD] [                    ] (          internal.async.Agent) INFO    - Passivation will be done on a per-page basis.
    2013-06-24 21:16:30,023 [bxapp2.healthnet.com] [  STANDARD] [                    ] (    pegarules.resadap.RAClient) ERROR   - Caught exception while looking up Connection Factory with JNDI Name: java:comp/env/eis/PRAdapterConnectionFactory, javax.naming.ServiceUnavailableException [Root exception is java.net.UnknownHostException: Unknown protocol: 'TCP']
    javax.naming.ServiceUnavailableException [Root exception is java.net.UnknownHostException: Unknown protocol: 'TCP']
    at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:34)
    at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:787)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:368)
    at weblogic.jndi.Environment.getContext(Environment.java:315)
    at weblogic.jndi.Environment.getContext(Environment.java:285)
    at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
    at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
    at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
    at javax.naming.InitialContext.init(InitialContext.java:223)
    at javax.naming.InitialContext.<init>(InitialContext.java:175)
    at com.pega.pegarules.priv.util.JNDIUtil.getInitialContext(JNDIUtil.java:106)
    at com.pega.pegarules.priv.util.JNDIUtil.lookupUsingRealContextClassLoader(JNDIUtil.java:128)
    at com.pega.pegarules.resadap.RAClient.init(RAClient.java:102)
    at com.pega.pegarules.resadap.RAClient.<init>(RAClient.java:84)
    at com.pega.pegarules.resadap.RAClientContainer.get(RAClientContainer.java:47)
    at com.pega.pegarules.session.internal.async.BatchUtils.callRAClient(BatchUtils.java:146)
    at com.pega.pegarules.monitor.internal.UsageDaemonImpl.initialize(UsageDaemonImpl.java:546)
    at com.pega.pegarules.session.internal.async.Agent.start(Agent.java:1400)
    at com.pega.pegarules.session.internal.mgmt.PRNodeImpl.startNode(PRNodeImpl.java:1520)
    at com.pega.pegarules.session.internal.mgmt.PREnvironment.finishInit(PREnvironment.java:533)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.pega.pegarules.session.internal.PRSessionProviderImpl.doWithRequestorLocked(PRSessionProviderImpl.java:1043)
    at com.pega.pegarules.session.internal.PRSessionProviderImpl.doWithRequestorLocked(PRSessionProviderImpl.java:765)
    at com.pega.pegarules.session.internal.mgmt.PREnvironment.getThreadAndInitialize(PREnvironment.java:379)
    at com.pega.pegarules.session.internal.PRSessionProviderImpl.getThreadAndInitialize(PRSessionProviderImpl.java:1516)
    at com.pega.pegarules.session.internal.engineinterface.etier.impl.EngineStartup.initEngine(EngineStartup.java:619)
    at com.pega.pegarules.session.internal.engineinterface.etier.impl.EngineImpl._initEngine_privact(EngineImpl.java:165)
    at com.pega.pegarules.session.internal.engineinterface.etier.impl.EngineImpl.doStartup(EngineImpl.java:138)
    at com.pega.pegarules.session.internal.engineinterface.etier.ejb.EngineBean.doStartup(EngineBean.java:120)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethod(PRBootstrap.java:349)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethodPropagatingThrowable(PRBootstrap.java:390)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethodPropagatingException(PRBootstrap.java:412)
    at com.pega.pegarules.internal.etier.ejb.EngineBeanBoot.doStartup(EngineBeanBoot.java:130)
    at com.pega.pegarules.internal.etier.ejb.EngineBMT_h449u3_ELOImpl.doStartup(EngineBMT_h449u3_ELOImpl.java:124)
    at com.pega.pegarules.web.servlet.WebAppLifeCycleListener._contextInitialized_privact(WebAppLifeCycleListener.java:259)
    at com.pega.pegarules.web.servlet.WebAppLifeCycleListener.contextInitialized(WebAppLifeCycleListener.java:167)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethod(PRBootstrap.java:349)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethodPropagatingThrowable(PRBootstrap.java:390)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethod(PRBootstrap.java:439)
    at com.pega.pegarules.internal.web.servlet.WebAppLifeCycleListenerBoot.contextInitialized(WebAppLifeCycleListenerBoot.java:83)
    at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1863)
    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126)
    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512)
    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
    at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
    at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
    at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.net.UnknownHostException: Unknown protocol: 'TCP'
    at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:216)
    at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:197)
    at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:238)
    at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:200)
    at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
    at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:353)
    ... 84 more
    2013-06-24 21:16:30,038 [bxapp2.healthnet.com] [  STANDARD] [                    ] (      etier.impl.EngineStartup) ERROR   - PegaRULES initialization failed. Server: pg-sbxapp2.healthnet.com
    com.pega.pegarules.pub.context.InitializationFailedError: PRNodeImpl init failed
    at com.pega.pegarules.session.internal.mgmt.PREnvironment.getThreadAndInitialize(PREnvironment.java:387)
    at com.pega.pegarules.session.internal.PRSessionProviderImpl.getThreadAndInitialize(PRSessionProviderImpl.java:1516)
    at com.pega.pegarules.session.internal.engineinterface.etier.impl.EngineStartup.initEngine(EngineStartup.java:619)
    at com.pega.pegarules.session.internal.engineinterface.etier.impl.EngineImpl._initEngine_privact(EngineImpl.java:165)
    at com.pega.pegarules.session.internal.engineinterface.etier.impl.EngineImpl.doStartup(EngineImpl.java:138)
    at com.pega.pegarules.session.internal.engineinterface.etier.ejb.EngineBean.doStartup(EngineBean.java:120)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethod(PRBootstrap.java:349)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethodPropagatingThrowable(PRBootstrap.java:390)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethodPropagatingException(PRBootstrap.java:412)
    at com.pega.pegarules.internal.etier.ejb.EngineBeanBoot.doStartup(EngineBeanBoot.java:130)
    at com.pega.pegarules.internal.etier.ejb.EngineBMT_h449u3_ELOImpl.doStartup(EngineBMT_h449u3_ELOImpl.java:124)
    at com.pega.pegarules.web.servlet.WebAppLifeCycleListener._contextInitialized_privact(WebAppLifeCycleListener.java:259)
    at com.pega.pegarules.web.servlet.WebAppLifeCycleListener.contextInitialized(WebAppLifeCycleListener.java:167)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethod(PRBootstrap.java:349)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethodPropagatingThrowable(PRBootstrap.java:390)
    at com.pega.pegarules.internal.bootstrap.PRBootstrap.invokeMethod(PRBootstrap.java:439)
    at com.pega.pegarules.internal.web.servlet.WebAppLifeCycleListenerBoot.contextInitialized(WebAppLifeCycleListenerBoot.java:83)
    at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1863)
    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126)
    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512)
    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
    at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
    at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
    at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: com.pega.pegarules.pub.PRRuntimeException: Method Invocation exception
    at com.pega.pegarules.session.internal.PRSessionProviderImpl.doWithRequestorLocked(PRSessionProviderImpl.java:1045)
    at com.pega.pegarules.session.internal.PRSessionProviderImpl.doWithRequestorLocked(PRSessionProviderImpl.java:765)
    at com.pega.pegarules.session.internal.mgmt.PREnvironment.getThreadAndInitialize(PREnvironment.java:379)
    ... 60 more
    Caused by: java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.pega.pegarules.session.internal.PRSessionProviderImpl.doWithRequestorLocked(PRSessionProviderImpl.java:1043)
    ... 62 more
    Caused by: java.lang.NullPointerException
    at com.pega.pegarules.session.internal.async.BatchUtils.callRAClient(BatchUtils.java:150)
    at com.pega.pegarules.monitor.internal.UsageDaemonImpl.initialize(UsageDaemonImpl.java:546)
    at com.pega.pegarules.session.internal.async.Agent.start(Agent.java:1400)
    at com.pega.pegarules.session.internal.mgmt.PRNodeImpl.startNode(PRNodeImpl.java:1520)
    at com.pega.pegarules.session.internal.mgmt.PREnvironment.finishInit(PREnvironment.java:533)
    ... 67 more
    2013-06-24 21:16:30,051 [bxapp2.healthnet.com] [  STANDARD] [                    ] (      etier.impl.EngineStartup) INFO    - PegaRULES initialization failed. Server: pg-sbxapp2.healthnet.com
    2013-06-24 21:16:30,164 [bxapp2.healthnet.com] [  STANDARD] [                    ] (ervlet.WebAppLifeCycleListener) ERROR   - Enterprise tier failed to initialize properly, PegaRULES not available
    2013-06-24 21:16:30,190 [bxapp2.healthnet.com] [  STANDARD] [                    ] (ervlet.WebAppLifeCycleListener) INFO    - Web Tier initialization is complete.
    <Jun 24, 2013 9:16:30 PM PDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    <Jun 24, 2013 9:16:30 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <Jun 24, 2013 9:16:30 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <Jun 24, 2013 9:16:30 PM PDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 167.238.162.41:8008 for protocols iiop, t3, ldap, snmp, http.>
    <Jun 24, 2013 9:16:30 PM PDT> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "pegamanaged2" for domain "sbxdomain8" running in Production Mode>
    <Jun 24, 2013 9:16:31 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <Jun 24, 2013 9:16:31 PM PDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>

    Greetings,
    javax.naming.NameNotFoundException. Root exception is
    org.omg.CosNaming.NamingContextPackage.NotFound
    =================
    Below is the line of my LoginServlet class which is
    referred to in the stack trace - Object object =
    context.lookup
                        ( "java:comp/env/ejb/WarehouseClerk" );The root of the naming context is 'java:comp/env' and this is where lookup automatically begins for EJBs and resources. IOW, by specifying "java:comp/env/ejb/WarehouseClerk" as the EJB lookup name the server is actually treating this as "java:comp/env/java:comp/env/ejb/WarehouseClerk". Specify only the ejb context ("ejb/WarehouseClerk") in your lookup and you should be fine.
    Any help would be most appreciated.
    SeanRegards,
    Tony "Vee Schade" Cook

  • Vi Failed to compile

    Hello, I have a vi called "Execute Program Test.vi" which was working OK.
    I tried to add an extra case to a case extructure but later I left everything as it was.
    When I saved the VI I got the Failed to compile error on img Error1.jpg
    Tried to Re-compile (CTRl +Click Arrow) but nothing changed and after a few tries this actios closes Labview.
    Also tried Heap Peek (Heap Pek FP and Heap PeekBD images )and on the list I looked for the red tag, I found it but it sems that it is only  remannet of a Select List or something similar. When I press F i get nothing. LV can't find the object as if the entry in Heap Peek was leftover.
    Any Ideas?
    Attachments:
    ERROR1.JPG ‏32 KB
    Heap PeekBD.JPG ‏84 KB
    Heap PeekFP.JPG ‏89 KB

    Vi 
    Attachments:
    Execute Program Step.vi ‏434 KB

  • Low Memory Warnings / Video Failed To Compile

    Hey all,
    I recently upgraded the RAM in my system from 8gb to 16gb. Around the same time, I moved my OS and certain files over to an SSD (probably not relevant, but better to provide the whole picture).
    After performing the upgrades, my performance sped up in Premiere- hurray! Exactly what I wanted. That is, until I preview clips or render them. When I render, I tend to get a Low Memory Warning from Windows part way through the process, and then subsequently, a "Video Failed To Compiled" error. Sometimes the program crashes outright, my screen turns to black, or I have to restart my computer. This has only started recently since the RAM upgrades and moving my OS over to the SSD... and I'm feeling really disheartened about it.
    The project I'm attempting to compile is about 1:30 long, isn't TOO effects heavy (four AE comps., Premiere Lumetri on every clip/sequence (in the main sequences), and running RedGiant Denoiser II on every clip).
    Now, I've picked up on ONE thing that I may be doing that is unfavourable, though I don't believe it's the cause of the memory errors... My footage is currently stored on the SSD, as well as Premiere itself (along with all the CC programs), while my disk cache is assigned to a folder on my Seagate HDD.
    Specs for the PC are:
    Adobe Premiere Pro CC 2014 (latest updates)
    Windows 7
    Intel Core i5 3570 3.40GHz 6M
    Kingston 16GB (2x8GB) DDR3-1333 CL9 RAM
    MSI HD7850 TwinFrozr 2GB GPU
    Asus P8Z77-V-LX MB
    OS is running on a 250GB Samsung 840 EVO SSD
    Everything else is on a Seagate 1TB Barracude 7200RPM HDD

    Hello,
    Thank you very much for the responses.
    I am very sorry for my delay - the system had gotten to the point where it was restarting itself as soon as I logged in, so I could not try your suggestions.
    This morning, I turned it on and tried Mattcoz's suggestion of closing and disabling RunSwUSB and so far, so good.  The system is running as it should and I have not had a single low memory warning.  If I start to get warnings again, I will come back and post a screenshot of my memory usage, but for now, the problem is solved.
    Again, thank you both very much for your responses!

  • Getting -90031 (can't find function) error from Mathscript node when running executable, but works when I run the pre-compiled VI

    I have set the Mathscript preferences 'Path' and 'Working Directory' parameters to the folder containing my scripts, and it works when
    I run the VI, but I get a -90031 error when I run the executable.
    What am I doing wrong?

    Hi Umars,
    I had the same problem. In my case it turned out that it was caused the surrounding code. Plus the error
    message was missleading. I got the error message -90031 (unknown symbol CalcWelchCorr2) for the
    following piece of code:
    ecorr= 1;
    if setup & src== 1
       for lag= 1:50
       rho=  CalcWelchCorr2( lag, win );
       if rho > 0.001, ecorr= [ecorr; rho]; else, break; end
    end
    CalcWelchCorr2 is a user defined function located in the MS search path. The problem was caused by the
    "break" in line 5. Actually this line was marked by some little warning symbol. Eventualle I modified the code
    to get rid of the break
    ecorr= 1;
    if setup & src== 1
       lag= 1; rho=  CalcWelchCorr2( lag, win );
       while rho > 0.001 && lag <= 50
          ecorr= [ecorr; rho];
          lag= lag+ 1; rho= CalcWelchCorr2( lag, win );
       end
    end
    and voila, the executable worked fine.
    However, I had to check all my VIs ( > 200 !) for similar errors which gave me headaches.
    Why does the application builder doesn't produce some appropriate error message ?
    E.g. "Line xxx in MathScript node in VI xxx cannot be executed"? Currently you get the
    impression that the application was build successfully but eventually you get strange errors
    or even erroneous results. Keep in mind that tracking down bugs in the final application is
    much more difficult that in LV. Also the error message produced by the executable was not
    helpfull at all.

  • Mathscript failed to compile

    Hi!
    I am trying to use a Mathscript node in LV 8.5.1, but with no success. I get the 
    error "VI Failed to compile" and the Mathscript is "marked as the main error".  I have
    used Mathscripts before but never had these problems. I use Windows XP SP3.
    Everything works fine when I try the Labview Mathscript Example.
    Do you have any solution for this problem?
    Thanks in advance!
    /Mattias
    Solved!
    Go to Solution.
    Attachments:
    MathScriptTest.vi ‏48 KB

    It looks like I might be having the same sort of problem in 8.6.
    I have a large project (deadline in several hours, of course) and suddenly one of my VIs will not compile.
    Can anyone tell me if there is something in this VI that is causing the Mathscript node to fail?
    I don't really have time to reinstall!
    Attachments:
    reMap.vi ‏29 KB

  • Upgrading to ISE 1.3 error ISE Global data upgrade failed!

    HI,
    Has anyone come across this issue? when upgrading, it seems to start all well but then this happens:
    - Data upgrade step 40/67, CertMgmtUpgradeService(1.3.0.616)... % Error: ISE Global data upgrade failed!
    Rolling back the configuration database...
    Starting application after rollback...
    % Error: The node has been reverted back to its pre-upgrade state.
    % Application install or upgrade cancelled.
    I've also upgraded it to the latest patch and tried again but to no avail. This is an appliance (3415) that came shipped with 1.2. It's not been configured other than the initial cli wizard. I've upgraded a fair few appliances but I haven't seen this issue come up before. Any thoughts? 
    Thanks in advance for any info...

    If this is a test setup then you can do fresh ISE install.back up existing config and restore it to 1.3. If its production then contact TAC

  • Compilation error:  Failed to read wsdl

    Dear Experts,
    I am getting issue during deployment of BPEL process. I have created a BPEL process with schema named TD_Init.xsd and I get deployed. Later I have changed my xsd content in the sense I have added some more elements on the same xsd and update my process. getting compilation error as
    Error: [Error ORABPEL-10903]: failed to read wsdl
    [Description]: in "bpel.xml", Global element declaration/definition of name '{http://www.example.org}ProcessRequestElement' are duplicated at the following locations:
    file:/F:/JDeveloper/jdev/mywork/TDRequest/TDIntegration/bpel/TD_Init.xsd [line#: 14]
    http://eway:8889/orabpel/default/RecommendProcess/TD_Init.xsd [line#: 14]
    http://eway:8889/orabpel/default/AdvanceIssue/TD_Init.xsd [line#: 14]
    There are at least two of them looking different:
    file:/F:/JDeveloper/jdev/mywork/TDRequest/TDIntegration/bpel/TD_Init.xsd [difference starting at line#:23]
    http://eway:8889/orabpel/default/RecommendProcess/TD_Init.xsd [difference starting at line#:23]
    [Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).

    Hi Rajesh,
    Thanks. You are having this issue because you are referencing the same xsd at a time with more than one process. Ensure that you reference the schema with its logical reference and use it within you local project directly. Even, if that does not work, then make it global and so all processes can use it .
    Example :
    You need to copy all your schemas into <ORACLE_SOA_HOME>/bpel/system/xmllib folder and access them using the following URL:
    http://<HOST NAME>:<PORT>/orabpel/xmllib/<XSD_PATH>
    For Example:
    http://localhost:7777/orabpel/xmllib/myxsd.xsd
    Regards
    A

  • SSIS Job is getting failed with an error "0x00000005 : Failed to compiled scripts contained in the package.

    Hi All. Could anyone resolve my issue.
    I was created a package with an Script task written in VB.Net.
    The Package was executing Successfully in BIDS.
    But when i tried to exceute the same using Sql server Agent Job, Its getting Failed with the below error message
    "Executed as user: Admin. Microsoft (R) SQL Server Execute Package Utility  Version 11.0.2100.60 for 32-bit  Copyright (C) Microsoft Corporation. All rights reserved.    Started:  5:12:27 PM  Error: 2013-03-13 17:12:32.33    
    Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors. 
    End Error  Error: 2013-03-13 17:12:32.33     Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict
    in class 'ScriptMain'., ScriptMain.vb, 156, 22  End Error  Error: 2013-03-13 17:12:32.36     Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: The binary
    code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully.  End Error  Error: 2013-03-13 17:12:34.28     Code: 0x00000005    
    Source: Formating Excel Sheet Formating Excel Sheet     Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.  End Error  Error: 2013-03-13 17:12:34.28    
    Code: 0x00000005     Source: Formating Excel Sheet Formating Excel Sheet     Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict in class 'ScriptMain'., ScriptMain.vb, 191, 22  End Error 
    Error: 2013-03-13 17:12:34.29     Code: 0x00000005     Source: Formating Excel Sheet Formating Excel Sheet     Description: The binary code for the script is not found. Please open the script in the
    designer by clicking Edit Script button and make sure it builds successfully.  End Error  Error: 2013-03-13 17:12:51.56     Code: 0x00000004     Source: Checking Alcon Files      Description:
    The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully.  End Error  Error: 2013-03-13 17:12:51.56     Code: 0xC0024107    
    Source: Checking Alcon Files      Description: There were errors during task validation.  End Error  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  5:12:27 PM  Finished: 5:12:51 PM 
    Elapsed:  24.336 seconds.  The package execution failed.  The step failed."
    Please give some solution to this.
    Thanks in advance

    Are you editing this job in SQL 2012? Is it wrapping your paths in \"? Like for example does the command line tab on the step look like this:
    /FILE "\"D:\yourPathGoesHere.dtsx\""  /CONFIGFILE "\"D:\yourPathGoesHere.dtsConfig\"" /CHECKPOINTING OFF /REPORTING E
    That's the problem I had, and I resolved it by recreating the whole thing via SQL Script and getting rid of all those \" things. I think that is preventing SSIS from looking up the precompiled binaries for your Script Task. So you should edit the command
    line manually:
    /FILE "D:\yourPathGoesHere.dtsx"  /CONFIGFILE "D:\yourPathGoesHere.dtsConfig" /CHECKPOINTING OFF /REPORTING E
    Please write back whether that helps you. David Dye's answer didn't help me at all.

  • Export release build failed with an error message: complilation failed while excuting : compile-abc

    I updated air sdk from 4.0 to 16.0 beta to fix apple app store submitting bug. I can build the project and run it on simulator without any problem.  But when I tried to export the ios release build, I got this error message: complilation failed while excuting : compile-abc. 
    I use commmand line to excute compile-abc.exe with the parameters that adt gives it, but it failed without any error message.
    Here is the command line:
    compile-abc.exe -mtriple=armv7-apple-ios -filetype=obj -sdk "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/avmglue.abc" -fields "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/air-fields.arm-air.txt" -O3 -abc-file-list=E:\MyApp\bin-debug\AOTBuildOutput8184169967790207636.tmp\ABCFilesList.txt
    There's a empty file AOTBuildOutput-0000001821_1821.o left in the command line workaroud path. I opened file AOTBuildOutput-0000001821.abc, but didn't get any clue. How can I trace this problem?

    Still having similar issues - seems to be when I embed an image - but works for every release except for release build
    Tried your work around but doesnt seem to make a different
    [Embed(source = "/../assets/[email protected]")]
    protected static const ATLAS_IMAGE:Class;
    [Embed(source = "/../assets/[email protected]", mimeType = "application/octet-stream")]
    protected static const ATLAS_XML:Class;
    [Embed(source = "/../assets/iconMap.png")]
    protected static const ATLAS_IMAGE_LOW_RES:Class;
    [Embed(source = "/../assets/iconMap.xml", mimeType = "application/octet-stream")]
    protected static const ATLAS_XML_LOW_RES:Class;
    if(Starling.current.viewPort.width > 320)
    atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE(), false), XML(new ATLAS_XML()));   
    }else{
    atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE_LOW_RES(), false), XML(new ATLAS_XML_LOW_RES()));

  • Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state

    we have developed packages to do the followings
    Extract data from DB2 Source and put it in MS Sql Server 2008 database (Lets Say DatabaseA).From MS Sql Server 2008 (DatabaseA)
    we will process the data and place it in another database MS Sql Server 2008 (DatabaseB)
    We have created packages in BIDS..We created datasource connection in Datasource folder in BIDS..Which has DB2 Connection and both Ms Sql Server connection (Windows authentication-Let
    say its pointing to the server -ServerA which has DatabaseA and DatabaseB).The datasource connections will be used in packages during development.
    For deployment we have created Package Configuration which will have both DB2 Connection and MS SqlServer connection in the config
    We deployed the packages in different MS SqlServer by changing the connectionstring in the config for DB2 and MS SqlServer...
    While runing the package we are getting the following error message
    Code: 0xC0016016     Source:       Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for
    use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
    ilikemicrosoft

    Hi Surendiran,
    This is because the package has been created by somebody else and the package is being deployed under sombody else's account. e.g. If you are the creator then the package is encryption set according to your account and the package setup in SQL server is
    under a different user account.
    This happens because the package protection level is set to EncryptSensitiveWithUserKey which encrypts
    sensitive information using creator's account name.
    As a solution:
    Either you have to set up the package in SQL server under your account (which some infrastructures do not allow).
    OR
    Set the package property Protection Level to "DontSaveSensitive" and add a configuration file
    to the package and set the initial values for all the variables and all the connection manager in that configuration file (which might be tedious of-course).
    OR
    The third options (which I like do) is to open the package file and delete the password encryption entries from the package. Do note that this is not supported by designer and every time you make changes to the connection managers these encryption entries come
    back.
    Hope this helps. 
    Please mark the post as answered if it answers your question

  • Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B

    Hi,
    I have developed several SSIS packages with the last Beta of VS2005 / SQL Server CTP. After the public release I tried to uninstall the CTP-Versions to install the msdn finals but this time I got lost and was not able to satisfy the requirements of the final setup of VS2005. So I decided to install the whole pc again and after some hours I had a clean machine (XP with latest SQL Server 2005 Standard and VS2005 Professional).   Now I have tried to open my SSIS-Project but getting the following error:   Error loading ImpNetqNewsRss.dtsx: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Schlüssel ist im angegebenen Status nicht gültig.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
    After some “googleing” I found this thread: http://forums.microsoft.com/msdn/showpost.aspx?postid=22739&siteid=1   If I’m right the solution should be to use a Package Password, but I can’t figure out where I have to go enter/change a password. I even can’t remember I that ever used a password on my old installation for a dtsx-package??   Any help is welcome…   Regards, Dirk

      Let's Say your package name is MyPackage
      In Visual Studio  Go to Control Flow Tab.
      Righ Click on an empty area inside the window not clicking  "Data Flow Component" .  pop up menu click the the properties to get to the properties window of MyPackage package.
    Under the Security Area -> You will see 
            ProtectionLevel              -- Change that to EncryptSensitiveWithPassword
            PackagePassword          -- enter password->  temp
    This should do the trick however to be sure:
    Below you will connection managers:
    Database Connections (if more than one preform on all) 
      Double Click your connection to get the property pages. Click "ALL" under the Connection Link on Left Side. Scroll Down to Security Area.
      Provide the followings:
       Password  (for the sql userid being used)
       Persist Security Info  = True
    Save the Package and connect to SQL Integration Srvices in SQL Manager  (To Server e.g; DBServer (Integration Services) 
      Stored Packages -> MSDB -->  Right Click --> choose Import Package
      in the property dialog box 
                  Package Location :   File System 
                  Package Path  -- Choose the location of your dtsx file.  (MyPackage.dtsx)
      Leave everything default.
      Click OK.
      Dialog box will appear asking for the Package Password 
      Provide the password-> temp
      You have successfully imported the package called MyPackage.
      In order to create a job.   
      In the job Step->
           Type:  SQL Server Integration Services Package
           In the General Tab:
                     Package Source :  SSIS Package Store
                     Server : DBServer  (Where we stored our package above)
        Click the button for the package:  Choose your package  (MyPackage)
       Click OK :
        It will ask the package password again :  temp
                    Package has successfully been loaded to Job Step.  Now you can schedule and do a test run on the job.
      Thanks for the patience of reading for those who are expert.
      - Azhar

  • TSQL code that causes table data to be deleted rather than fail with a compilation error

    Afternoon,
    I recently did this by accident and it felt as though it should have failed with a compilation error rather than run
    A query of the form
    delete from jobs
    where id in
    select id from calibrations
    will delete all rows in the jobs table when the id column exists in the jobs table, but not the calibrations table. This should fail with a compilation error.
    the following sql can be used to generate a test database to show the problem
    USE [test]
    GO
    /****** Object:  Table [dbo].[calibrations]    Script Date: 28/11/2014 13:32:59 ******/
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    CREATE TABLE [dbo].[calibrations](
        [JobId] [int] NULL,
        [textfield] [nvarchar](50) NULL
    ) ON [PRIMARY]
    GO
    /****** Object:  Table [dbo].[jobs]    Script Date: 28/11/2014 13:32:59 ******/
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    CREATE TABLE [dbo].[jobs](
        [Id] [int] NOT NULL,
        [Name] [nchar](10) NULL
    ) ON [PRIMARY]
    GO
    INSERT [dbo].[calibrations] ([JobId], [textfield]) VALUES (1, N'something')
    GO
    INSERT [dbo].[jobs] ([Id], [Name]) VALUES (1, N'a         ')
    GO
    INSERT [dbo].[jobs] ([Id], [Name]) VALUES (2, N'b         ')
    GO
    INSERT [dbo].[jobs] ([Id], [Name]) VALUES (3, N'c         ')
    GO
    INSERT [dbo].[jobs] ([Id], [Name]) VALUES (4, N'd         ')
    GO
    INSERT [dbo].[jobs] ([Id], [Name]) VALUES (5, N'e         ')
    GO
    INSERT [dbo].[jobs] ([Id], [Name]) VALUES (6, N'f         ')
    GO
    Simon
    simon

    will delete all rows in the jobs table when the id column exists in the jobs table,
    but not the calibrations table. This should fail with a compilation error.
    Hello Simon,
    That's a bug in your T-SQL Statement, not in SQL Server. The Statement as it is valid and column "id" exists, so why should it fail on compilation?
    And that is the reason why we always should use full qualified object name, e.g. like
    delete from jobs AS J
    where J.id in
    select SUB.id from calibrations AS SUB
    and this Statement should fail on compilation.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Compiler error with forte 6.2 - assertion failed in sp_interface.cc

    I have a compilation error when compiling on my Ultra 10
    using Forte 6.2 C compiler (5.3). Here's the line:
    teds@enigma[195]% cc -xtarget=ultra3 -xarch=v8plusb -dalign -fns -fsimple=2 -ftrap=%none -xlibmil !!
    cc -xtarget=ultra3 -xarch=v8plusb -dalign -fns -fsimple=2 -ftrap=%none -xlibmil -xO4 -DCMO_DEBUG_DETAIL -DUSE_DATACONN -c cmoisubs.c -o cmoisubs.o
    cg: assertion failed in file ../src/ms_pipe/sp_interface.cc at line 689
    cg: Internal error: constval annotation set on reg with multiple defs
    cg: 1 errors
    cc: cg failed for cmoisubs.c
    teds@enigma[196]%
    Does anyone have any ideas?
    Thanks,
    Ted

    Hi There,
    Form the error message it seems like a bug in cg.
    Try the follwoing option and see if the bug goes away.
    -Qoption cg -O0 or use -Qms_pipe-off.
    Please refer C user's guide for usage.
    ....jagruti
    Developers Technical Support
    Sun Microsystems, http://www.sun.com/developers/support

Maybe you are looking for

  • Re: BPS real time reporting scenarios

    Hi Experts, Could you guys please help me regarding the financial planning reporting scenarios in BPS. If you could please give me some examples it would be more appreciated. Many Thanks Shrinu

  • MegaSky 580 - Presto! Error message "The device is not ready"

    Error message "The device is not ready. Please check whether your device is connected correctly." I can see the device in the drop down menu of the settings window, when I select It, I get again the same error message. If I plug off the usb stick, pr

  • Error creating new Customer Equipment Cards

    Dear experts, I am getting the following error when creating a new Customer Equipment Card: This entry already exists in the following tables  'Customer Equipment Card' (OINS) (ODBC -2035)  [Message 131-183] I cannot find out what is causing this! SA

  • Aggregate-collection-mapping combined with optimistic-locking

    I've tried to set up an aggregate-collection-mapping and everything seems to be okay. But one thing still lacks: use this aggregate-collection in combination with optimistic-locking. Defining to use optimistic-locking (exactly: timestamp locking) doe

  • I want my old version(iOS 6.1.3) iOS 7 just a ****

    i want a revert back to my old ios....please help mee......i dont need ios7