GoDaddy site won't display properly

I have been working with a client's Dreamweaver site; however, when I went to upload it to GoDaddy, the pages and images don't display properly.  How can I fix this?
Will I need to change the links for every missing graphic, so that they come directly from the root?  Is there an easier way?
This particular site has multiple level and sub-folders, etc.
Please HELP!!!!

Thank you so much!  I hadn't thought about that.  Since it's a one-time fix, I'll go through and change any absolutes to relative.
Thanks again.
Sincerely,
Lynn

Similar Messages

  • Photo page won't display properly in safari

    Hi everyone!
    I'm completely new to building websites and need some of your expert advice?
    For some reason my photo pages won't display properly in Safari but ok in Firefox?
    It worked fine a week ago and I can't think what I've done wrong since I republished last night?
    http://www.abeledo.talktalk.net/losavellanos/House.html
    Can anyone help?
    I'll buy you a pint!
    Cheers

    No luck unfortunately.
    I changed the background to a solid and made the changes that you suggested roddy, but neither seemed to work. I know I must be doing something wrong? Do the photos appear ok with you roddy? All I see, is half the page i.e nav bar, top image, 'the house & garden etc text and top half of the darker box where the thumbnails should appear. And this happens with all 3 photo pages currently on the site.
    http://www.abeledo.talktalk.net/losavellanos/House.html
    http://www.abeledo.talktalk.net/losavellanos/Teror.html
    http://www.abeledo.talktalk.net/losavellanos/The_Island.html
    I've been clearing my cache in both browsers every time I republish.
    I've also tried upgrading to the new 3.0.3 beta Safari? You'd think - out of all the browsers- iWeb would work seamlessly with Safari wouldn't you? - Firefox is fine.
    Do you think I should start from scratch?

  • Site doesn't display properly when viewed in Windows 8.1 and IE11

    Web site doesn't display properly when viewed in Windows 8.1 and IE11. Site html and css validates no errors at W3C. Any ideas?

    The following is what I see in IE11 on a Windows 8.1 system, no difference using Firefox, Chrome or Safari on the same system.

  • Muse site doesn't display properly

    Here's the deal.  I created a site in muse, then exported to html.  Muse created index.html inside of the folder where the muse doc is located.  That's exactly what I expect.  Now, when I ftp to my webserver, all I get is plain text.  I don't think the server is the culprit, because it hosts other muse sites properly.  if I navigate to the UNC path and launch index.html, it displays properly.  it's only when I hit the url from a browser.  What could I possibly be doing wrong here? 

    Hello Matt,
    On running the pages locally from the location where they were exported to, if they look fine and load up as they are supposed to, then it confirms that Muse exported the pages fine. This then leaves only two possibilities where things might have gone wrong, as mentioned below:
    1. Either the upload didn't go fine. In this case, try re-uploading using both the "File -> Upload to FTP host" and "File -> Export As HTML" and then using an FTP client to upload to the host.
    2. Or the host isn't rendering the site as it should. In this case, have the host "Reset your FTP permissions" and then reupload the site to see if that resolves the issue.
    Hope this helps.
    Cheers
    Parikshit

  • Flash site fails to display properly in internet explorer.

    I am having trouble finding out why
    http://websitemedia.net/playground/ferrioni/sandbox/
    fails to display properly in internet explorer ! The same site,
    http://websitemedia.net/playground/ferrioni/sandbox/,
    displays properly in firefox.
    I have checked & rechecked everything.
    What am i missing?
    BL

    It played fine at my side too.
    What version of flash you are using to create that swf?
    Make sure you have compatible version of flash player for
    your internet explorer.
    Try update your flash player to the latest version.

  • Flash site fails to display properly in firefox & ie.

    Greetings all,
    site below fails to display properly. When i visit the link
    below using firefox or ie6, i see it fine. but when anyone else
    visits it they see it with defects.
    defects include product text overlapping the fg&m logo,
    ferrioni home designs, inc header is cut off and only part of it
    displays, featured products headers is also cut off and only part
    of it displays.
    http://www.websitemedia.net/playground/ferrioni/sandbox/index.html.
    have tried the following.
    **made sure latest flash player is installed where customer
    fails to see the site display properly.
    **made sure latest ie and firefox browsers are installed
    where customer fails to see the site display properly.
    One important note, we are export flash movie using flash
    vesion 6.
    Need some insight on how to make sure everyone sees the site
    displayed properly.
    Thanks in advance
    BL

    This is just a wild guess but... Be sure that you have
    properly embedded any needed fonts for dynamic or input
    text.

  • TOP OF SITE WON'T DISPLAY IN MOZILLA FIREFOX.

    When using Mozilla Firefox my website won't display the top of the page on many pages. Works fine in Safari. Problem just started! Using Squarespace CMS.

    Could you give a link to the page that has the problem?
    If you use a negative margin-top anywhere in the page, you might compare this discussion: [https://support.mozilla.org/questions/1004696 Top of website not showing].

  • Noise reduction won't display properly in LR 3.4.1 Develop Module

    I encountered this issue first time last night - noise reduction will not show in "Fit" view of the Develop module for pictures that have a graduated filter applied as well. Having said this,
    - The pictures display correctly in Library Loupe view (Fit and 100%)
    - The pictures display correctly in Develop module when zooming in to 100%
    - The pictures display correctly in Develop module when clicking in history on Luminance smoothing (first picture). Selecting the next step in the history, Add Graduated Filter, displays the picture without noise reduction (second picture - I tried on a virtual copy the other way round - first have a graduated filter and then apply noise reduction, but doesn't work either. Noise reduction just won't display in Develop module / Fit View once a graduated filter is applied as well.
    Has anyone else seen this behaviour or, even better, found a solution? I already tried purging the raw cache, no success. Working on Windows 7 / 64bit.
    Thanks,
    Andreas

    Jeff, I had difficulty understanding this same issue as presented at the link I posted above. With my low-noise Canon DSLR RAW images I simply couldn't see the onscreen rendering issues they were talking about. It even appeared this might be unique to Mac platforms and Windows 32 bit OS, since my Windows 7 64bit system didn't appear to have this issue.
    Following suggestions to shoot a picture at -4 F stops and then increase exposure by +4 F stops in LR helped me get a better understanding:
    http://forums.adobe.com/message/3857767#3857767
    Granted this is an extreme shooting situation, but it helps demonstrate what happens when using exposure, fill and HSL sliders to increase exposure significantly (+2 to +4 EV) in specific areas of the image. Now you have noise that will be visible in smaller exported scaled images, perhaps even those sized for posting to the web.
    The issue is at lower ISO settings (camera specific), view sizes less than 1:1 have no noise reduction applied (Mac & Windows) or sharpening applied (Mac & Windows 32). There appear to be platform differences in the way sharpening is applied, because on my Windows 7 64bit system sharpening is applied at all ISO and all view sizes including "fit" view, but noise reduction is only applied at higher ISO settings – the same as all others have described. I wanted to point this out since it is one of the reason I had difficulty duplicating what the OP was seeing.
    We know sharpness and noise reduction settings interact with each other, so it is important to have both applied in the onscreen image to determine their affect. Using images with additive Exposure, Fill and HSL slider settings approaching +2 to +4 EV, there is simply no way to see accurate rendering without both noise reduction and sharpness applied at all view sizes, including “fit” view. This can occur with low ISO images, not just at some predetermined camera specific high ISO where noise becomes predominant.

  • When I try to add motion to a photo, the image just becomes white and won't display properly--what am I doing wrong?

    Although the photo settings display properly and seem to indicate what I want will happen (the sliders work and I can set start and end times, etc.) as soon as I click the check box for "ken burns effect" the image becomes white and stays that way unless I undo my actions.  Very frustrating.  If accepted, it stays white and does not show the original image when the movie is played.  What is going on here?

    On the right hand side of the Photoshop window I used the Levels under "Add and adjustment". The tag for the photo in the upper left corner says IMG_3639 copy.psd@25% (Levels 1, Layer Mask/8)

  • Site won't load properly in IE

    I've created a site that works perfectly in Firefox and
    Safari, but not in IE. I'm not sure why, but some of the pages
    aren't downloading properly (some won't load at all). I used
    Dreamweaver to create a drop down menu, but don't know if that
    would cause the problem.
    I'd be grateful if anybody could help. The site is at
    http://www.lucyohara.talktalk.net/test/
    Thanks

    Looks fine here in IE6. You may want to compress your images
    better as the
    page is quite heavy:
    http://www.websiteoptimization.com/services/analyze/wso.php?url=http://www.lucyohara.talkt alk.net/test/test.html
    Walt
    "Lucy4" <[email protected]> wrote in message
    news:frdu86$c2$[email protected]..
    >I did that for this page:
    http://www.lucyohara.talktalk.net/test/test.html
    >but it's still not working in IE6

  • Favicon on MobileMe web site won't display with Safari - OK with Firefox

    I have a web site published to MobileME using iWeb - I have added a favicon and updated HTML accordingly. Now after trying every combination of code and searching the Safari, iWeb and MobileMe forums I cannot figure out why my favicon will not display using Safari but will with just about every other browser (Firefox, IE, Netscape are the ones I've tried on a Windows PC - also won't dispaly using Safari for Windows). Any ideas???
    I've put the favicon file in the web.me.com/pat.schafer/web/sites folder as well as the web.me.com/pat.schafer/web/sites/sitename folder and added the HTML ref code to every html file - I'm going crazy.

    Hi Certified - tried your tips to no avail. I'm beginning to think it's some interaction (bug??) when using a site published to MobileMe (and iWeb?) and Safari. Note I also tried using Windows Safari on a PC which had never viewed the site and it still showed the Apple favico but as previously stated Firefox, and IE on this PC did show my favicon. (I have not tried to load Firefox on my iMac but may try this as well.) I'd try the Apple Support Center but I don't hold up much hope of their being able to assist - I was at the Genius Bar yesterday in the Sydney shop on another matter (broken mouse) and asked about this favicon issue and was told it was beyond the scope of what they can assist with.
    Hello Old Toad - thanks anyway for the tip on the OVI slideshow - also thanks to your earlier tips on using OVI I did know about the trick of using a transparent shape but had got around to doing this - I'm still in the early stages of learning using iWeb ... the site in question is just a bit of a "sandbox". In fact I'm pretty much on my way to a bookshop to get a book an HTML and other web design technologies - clearly one must really understand the underlying technology to make these things work.

  • Ad page for one site won't display, but works fine with Internet Explorer

    Main page of one site displays fine, but ad page won't. Works fine under Internet explorer. Didn't have problem before.

    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    (You also can clear Firefox's cache completely using:
    orange Firefox button ''or'' Tools menu > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now")
    (2) Remove your live.com cookies (save any pending work first) using either of these. While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?

  • Animated GIFs won't display properly in Mail.app

    I have a weird problem with animated GIFs received as attachments in Mail.app. On my Mac mini, they're only displayed as the first frame within the Mail message window and the animations don't play. But on my iMac G4, the same messages display the animations properly within Mail.app. Both Macs are currently running Mac OS X 10.4.4, but I've observed this problem since 10.4.3. I have the same software installed on both machines. Does anyone have any ideas why this is happening?

      * Test.java
      * Created on January 13, 2007, 6:52 PM
      * To change this template, choose Tools | Template Manager
      * and open the template in the editor.
    package Test;
    import javax.swing.*;
    import java.awt.*;
    import java.util.*;
      * @author Calbrenar
    public class Test extends JFrame
        private JList testList;
        private DefaultListModel listModel;
        private JScrollPane serverLogScroller;
        private Container container;
        /** Set up GUI */
        public Test()
           super ("List Test");
           //Get content pane
           container = getContentPane();
           container.setLayout(new FlowLayout());
           listModel = new DefaultListModel();
           listModel.addElement("");
           testList = new JList(listModel);
           testList.setVisibleRowCount(1);
           //testList.setFixedCellHeight(35);
           //testList.setFixedCellWidth(400);
           serverLogScroller = new JScrollPane(testList);
           serverLogScroller.setHorizontalScrollBarPolicy(ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
           serverLogScroller.setVerticalScrollBarPolicy(ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS);
           container.add( new JScrollPane( testList));
           setSize(700, 75);
           setVisible(true);
        public void addStatus(String str)
           listModel.add(0, str);
           //testList.setPreferredSize(new Dimension(400, 15));
           //serverLogScroller.revalidate();
           container.validate();
        public static void main ( String args[])
           Test application = new Test();
           application.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
           application.addStatus("-ERR");
           application.addStatus("+OK Enter Password");
           application.addStatus("-ERR Bad Pass");
    } // end class Test

  • Site doesn't display properly

    Hi,
    Before (maybe a week ago) when I created a site in Muse and published to Business Catalyst, all pages would then be in the designated order, all links working, but now, when I publish, I get the Coming Soon! sign on ....site.com and wrong address on ...site.com/index.html.
    Do I really have to go and select a correct page/template for each page in BC now? Or is it something that just doesn't work atm?
    For instance, now I need to set a Home page template (a page created in Muse) for ...site.com AND ...site.com/index.html just to have a homepage showing up properly. Am I overlooking something?
    Cheers.

    Thank you for your post.
    Can you provide us with more details on this, such as the site name (published in BC), and also the .muse file. These details are required to replicate the issue on our end and reach a definitive resolution.
    Thanks,
    Parikshit.

  • Imac 2006 monitor won't display properly

    The left half of my monitor is fuzzy and black on my 2006 imac.   I have a cable to connect an external monitor.  How do I get the external monitor to work properly.   Right now when I plug in the external monitor, all I can see is when I move the mouse left to right (and off the imac monitor, it continues onto the external monitor.    I am a beginner with all this.

    Open System Preferences, click on Display, click Detect Displays, select your external display, and check the box for Mirror the Internal Display.  That should make the external display what the internal display is supposed to show.
    You might have to fiddle with Resolutions to get the external display to appear properly (if at all, because it is probably a bad logic board or graphic processor, which will make external display not work properly, and is a very expensive repair).
    Good luck.

Maybe you are looking for