Going from WD to ITS and back from ITS to WD.

Hi Experts,
My requirement is:
1: Call a standard transaction from WD in a Web Browser. How to do it ?
        As per my understanding, i have made an Internet Service with calls the standard transaction which is WEB HTML enabled. I have published this Internet Service on the ITS and when i execute this service, it works. But problem again is, is there a standard function module to call the internet service.
2: How to come from ITS server back to WD + the data transfer should occur between them ?
Kindly let me know this ASAP.
Hoping for  some good response.
Cheers!
Ashish.

Hi,
the integration of WDA and ITS is not officially supported.
For an inofficial workaround, take a look at Andrey Alimovs two weblogs.
Regards, Heidi

Similar Messages

  • My MacBook Pro is now asking for a login. When I enter my passcode, it goes to a blue screen and back to the login screen. I saw several older posts, but nothing recently. I am running Snow Leopard.

    My MacBook is now asking for a password. When I login, it loops to a blue screen, and back to the login. Incorrect logins create a shaking of the login screen. I tried restarting with the shift key depressed, with no luck.

    I performed a hard shutdown, and upon start I could access my system without logging on. I'm not sure what caused the issue, but I have not booted up in almost a week.

  • My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?

    My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?
    Please help me out as this is very irritating. This has been happening for the last 20-30 minutes. It had roughly half battery left.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Blue screen of death, and continous reboot.  Phone never actually boots up, just keeps going from reboot to blue screen and back again.  Any suggestion?

    Blue screen of death, and continous reboot.  Phone never actually boots up, just keeps going from reboot to blue screen and back again.  Any suggestion?

    Hello jared1915
    If you are stuck in that loop, the next step would be to restore your iPhone. Check out the article below to get your iPhone into recovery-mode and restore it in iTunes.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

  • I had to get a new iphone and want to know how to tell if my pictures from my previous phone were backed up on itunes.  when i connect my c even if i'm going from a 4 to a 5s?

    i had to get a new iphone and want to know how to tell if my pictures from my previous phone were backed up on itunes.  when i connect to itunes, does it automatically sync / backup even if i'm going from a 4 w/IOS 6 to a 5S w/IOS 7?

    Welcome to the Apple Community.
    Yes you can probably delete the 2 incomplete back ups they are unlikely to work.
    However, I'd be inclined to back up to a computer as well and restore from there, if you are changing your phone.

  • I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel.  My Basic panel should be below the Histogram.  Any ideas how to get it back.  I have even

    I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel.  My Basic panel should be below the Histogram.  Any ideas how to get it back.  I have even uninstalled my lightroom and reinstalled it with same issue.  Help!!!

    Right click on or near one of the other headers and a pop-up will appear and you will be able to select the Basic Panel for viewing.

  • I have Lion on my laptop and I want to back up my calendar TO my iphone. Not the reverse. iCloud only goes from iphone to iCloud to mac not the other way. Also, why doesn't "sync" mean update most recent changes across all devices?

    I have Lion on my laptop and I want to back up my calendar TO my iphone. Not the reverse. iCloud only goes from iphone to iCloud to mac not the other way. Also, why doesn't "sync" mean update most recent changes across all devices? I thought that was the point of iCloud. Any suggestions since iCloud doesn't seem to work?

    It's a work computer so I wanted to save them to my iTunes so I can access from another computer.  Should I go to a home computer and just Import for best results?  If so how do I do this?  Also, why would I be synched with another library and how do I find out what this is?  Very new/green user here

  • My screen goes from large to small in safari. also disappears than comes back. goes to desktop and then comes back.

    I am having an issue when using safari. My screen goes from really large to normal. The screen also disappears and I get to the desktop with the small screens on top. Then I get the dock (I believe) with the calendar, time, weather, ect. Mouse goes crazy whether using the track thing or a regular mouse. Doesn't happen all the time but most of the time. Also the computer feels really hot to the touch.

    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

  • I'm going from an IPAD1 to an IPAD4. If I back up my IPAD to the cloud and then download to the new IPAD, will it retain game data so I won't have to start my games over?

    I'm going from an IPAD1 to an IPAD4. If I back up my IPAD to the cloud and then download to the new IPAD, will it retain game data so I won't have to start my games over?

    Welcome to the Apple Community.
    Babs5819 wrote:
    .....will it retain game data so I won't have to start my games over?
    Yes, however you would be much better backing it up to iTunes to do this rather than iCloud.

  • HD ANIMATION FROM AVID TO FCP AND BACK

    Hey,
    I have a client who needs me to edit Avid HD sequences into a short promo in FCP. I want to do an offline edit and then reconnect the sequence to full HD quality and export the promos back to Avid. Has anyone had to do this? Would I loose HD quality going from Quicktime to Avid Media? Would my G5 Dual 1.8 with FCP 5 HD be able to handle import, edit and export of full quality HD media?
    I hope this is enough info. Thanks

    you will be much happier and much better off if you stay in Avid world and make those corrections there. Avid uses its own propritery media format that can't be easily transfered to FCP. You could use something like Automatic Duck to generate a list and then recapture in FCP but other than that, stay in Avid. In other words, it is not absolutely simple to move the MXF files.

  • Installed the update tonight and now my phone (Lumia 928) won't power up.  I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen.  What's wrong and how do I fix it?  Help!

    Installed the update tonight and now my phone (Lumia 928) won't power up.  I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen.  Tried it 10 times with the same result.  What's wrong and how do I fix it?  Help!

        Oh no Mr.Ected!
    I can see if we can get your phone back on! I understand how important it is to have a phone. Have you tried this to see if we can get it back on? http://vz.to/1DZhteH . If it is still goes to a red Verizon screen and then to black we might need to do a master reset. While the phone is off try this:http://vz.to/1DZhXkU Be mindful this is the last resort because it will erase everything on the phone. If you have done back up assistant in the past you will be able to get you contacts back. Please let me know if you need any more help.
    AmberF_VZW
    Follow us on Twitter @VZWSupport

  • I have subscribed to I Tunes Match on my computer where I've been syncing and backing up my I Phone.  Can I access my music before all the artwork is uploaded from my computer?

    I have subscribed to I Tunes Match on my computer where I've been syncing and backing up my I Phone.  Can I access my music before all the artwork is uploaded from my computer?

    Hi,
    You will no longer be able to sync manually with match. I would suggest that you wait until match has competed its process on your computer and that you are told how many tracks are in the cloud.
    If you activate match on your iOS device too soon, you may find that all your tracks are not there. Ps it is not just artwork that is being uploaded, it's music as well.
    Jim

  • How can I get all the stuff from my old iPad 2 to my new iPad 2? I have an apple id and have synced and backed up my old iPad 2 regularly.

    How can I get all the stuff from my old iPad 2 to my new iPad 2? I have an apple id and have synced and backed up my old iPad 2 regularly.

    Sky is right you can restore the old backup and it will not affect the old iPad
    To make sure do this:
    1. If you have the old one then just turn off wi-fi and the iPad (that's just for your peace of mind)
    2. Put new iPad on airplane mode (just for no interruptions )
    3. Connect it (while it's on, don't shut it down)
    4. Follow prompts and when it asks if you want to setup as new or restore CHOOSE: RESTORE
    5. It will make its magic (just wait for it to sync, restarts, and finishes) it might ask you to update software if it does just accept
    6. You can rename your new iPad like that you can have a fresh back up
    7. ENJOY your new iPad
    ----------OR-----------
    1. Do the above steps 1, 2, 3.
    2. On step 4 you can choose to set up as new
    3. Then you can choose what to sync on it (click on iPad on the left panel then the tabs on top you choose what you want on it (you can also do that if you restore)
    4. Follow steps 5, 6, 7.
    ****If you don't have your old iPad you can remove it from your account ****
    ****Also when they sync it to a new computer it will setup as new unless they had an old one then they will restore it their old one****
    ****if you have it connected with your MobileMe or iCloud and you have the find my _____ you can also wipe it as soon as it comes online****
    LET ME KNOW IF YOU HAVE ANY QUESTIONS OR CONCERNS
    AGAIN ENJOY YOUR NEW IPAD!!!

  • I have an iPhone 3gs and will be getting a new iPhone 4s. Once I have updated my existing 3gs with iCloud and backed up to my computer, will I be able to transfer my existing data to my new 4s using iCloud or will I need to do this from my iMac.

    I have an iPhone 3gs and will be getting a new iPhone 4s. Once I have updated my existing 3gs with iCloud and backed up to my computer, will I be able to transfer my existing data to my new 4s using iCloud or will I need to do this from my iMac.
    Thanks

    The Apple genius at the Apple store told me this would work. It failed. Basically, updating your iPhone 3GS to iOS5 wipes your 3GS of its data so you can't really do this. Some data worked. Music, photos etc didn't work at all.
    I suggest avoiding iCloud completely for a few weeks until Apple gets it working.

  • Move a file to another computer and back and keep links from breaking?

    I have a high school kid neighbor who is going to work on some pages that are on my site, but she does not have the site or access to the server.  I want to give her the page on a thumb drive to work on in Dreamweaver on her computer. The pages have links and graphics already in them that work.  After she updates the words on the page, I want to then get it back from her and put it back into my local disk version. 
    When I tried this, all the existing  links to the images were broken when I copied her page back into my local Dreamweaver site folder .  How should I move the page to her computer and back so that when I get it back the image and other links that were valid when I gave it to her are still valid?  Using the Mac's Operating system file manager isn't the answer it seems.
    Thanks
    Hank

    Hi Hank,
    one possibility would be your school kid neighbor generates by using a file manager a directory tree that is a mirror image of your tree. For example:
    So the respective links should be identical.
    Hans-G.

  • I bought a new MacBook Pro several months ago.  I keep losing my wireless connection (my wife, sitting several feet from me has no problem with her iPad2).  I find the quickest fix ix to turn Airport off and back on.  Very annoying.   Suggestions please?

    I bought a new MacBook Pro several months ago.  I keep losing my wireless connection (my wife, sitting several feet from me has no problem with her iPad2).  I find the quickest fix ix to turn Airport off and back on.  Very annoying.   Suggestions please?

    What kind of wireless router are you using? more importantly which protocol are you connecting with? Are you and wife connecting using the 2.4Ghz band? or do you have a dual band router that offers the 5GHZ band?  Are you both connecting vie 802.11 a/b/g or n?
    The best thing to do is to go into SYSTEM PREFERENCES and select NETWORK, then select AIRPORT and click on the ADVANCED button.
    Under the AirPort tab you should delete all the preferred networks and only add back in your network with the proper security settings and passwords.
    If you hold down the option key on your keyboard while clicking on the airport icon at the top on your macbook pro. you'll seesome data that will tell you what band and mode you're connecting at, as well as in an indication of signal strength (RSSI) if you write down and post back that information it'll tell us what's going on.

Maybe you are looking for

  • Special characters in the employee names is adding ASCII  to the file

    Hi Team, Iam working on a outbound interface which has a length of 3000. For the last name it is having some special charecters Vázquez . When downloading into application server, the special characters in the employee names is adding ASCII character

  • More bars in more places?

    For the past year i was part of Verizon and I never had a problem with coverage and signal strength. But now, I swing from 4 to 1 to occasional drop out in my apartment with AT&T. This morning I went to Target and had "no service" while inside. Is th

  • Adobe Dreamweaver CS6 constantly freezes temporarily while editing code

    When using Adobe Dreamweaver CS6 or older versions, while writing code in PHP, when I end some syntax like closing parenthesis, adobe get frozen for 20 to 30 seconds, the more lines I have the slower it gets. I guess it's because its detecting mistak

  • Recording on Zen Visio

    Hi People I'm thinking about upgrading to a VisionM from ZenMicro... my first question is this: I heard that you can only record for 0 minutes on the VisionM. Is that the case. because i'll mostly use this player for recording the class. I can use th

  • WebDynpro Application View

    Hi Guys, We create WebDynpro application  that contains three views. We want to publish each view to a portal iview.But when we create WebDynpro iview , it only shows the application default view.How can we show the other two views as iview in the po