Going HD 24fps to standard DVD NTSC

Hey everyone,
I've been working with HD projects for a couple years, but I now have to bring them to DVD NTSC format to ship out to potential employers. I mainly work in the following format:
1280x720 HD (Square Pixels)
24 fps
Progressive (No Fields)
So, what's the best way to get this down to proper format (720x480, 0.9 pixel aspect, 29.97 fps) without hiccups and quality loss? I have the Adobe suite, so access to Premiere, AE, and Encore are no problem. HD/Blu-Ray formats are also out of the question. Thanks for the help in advance! :D

Hi Nick,
Read this forum topic:
http://www.adobeforums.com/webx/.59b5b2fb/62
Using PrP and some readily-available free tools, you should get a very nice result.
-Jeff

Similar Messages

  • Standard definition NTSC DVD spec

    As I remember the DVD spec for NTSC, the players recognize 24p, but not 30p. Can someone confirm this? What I suspect this means is that a standard DVD player will just interpret the 30p as 60i and send it to the display as interlaced fields. While for 24p, the player will record it as such and then play it out to the display as progressive frames.
    Thanks,
    John

    Thanks James. I wonder if it's because I have QuickTime Pro v 7.0.2 on the G5. I have QT Pro 7.0.3 on the iMac that lost the ability to export to MPEG2 via QuickTime conversion when I updated FCP to 5.0.4 (from 5.0.3).
    Regardless, I was having great success exporting this way, from HDV right to NTSC standard definition MPEG2. Looked great, no problems.
    I'm still running FCP 5.0.3 and QT 7.0.2 on the G5, and am afraid I'll lose the QT conversion MPEG2 option if I upgrade!...
    PowerMac G5 Dual 2.5 GHz   Mac OS X (10.4.3)   2.5 GB Ram
    PowerMac G5 Dual 2.5 GHz   Mac OS X (10.4.3)   2.5 GB Ram

  • Audio goes in and out of sync when burned dvd played on standard DVD player

    I made a short film recently (7:00 mins) and once completed and burned to DVD using iDVD and DVD Studio Pro about 20% of the clips have out of sync audio. Just slightly out of sync. Some more noticeable than others.
    Playing off the timeline syncs perfect, the exported prores 422 mov file syncs perfectly, and if the finished DVD is played on my mac or my pc the sync is perfect, but when played on a standard dvd player to my TV I get the syncing problem, but only at certain points through the film. As I said, about 20% of it. The rest of the film is fine.
    Shot on Canon 5d mkII - footage converted to prores 422 1920x1080. Audio recorded on Zoom H4N with some ADR recorded on logic pro. Audio synced manually using clapper board reference. Using a 27'iMac with current OSX update as of 14 March 2011. Edited in FCP 7, exported to proress 422, burned to DVD with current iDVD and DVD Studio Pro, all current versions and updates.
    I have tried exporting to mpg4 and mpg2 - no joy. I checked audio bit rates and discovered the logic recorded stuff was 44.1khz as opposed to 48, so I converted to 48 but still no fix.
    I am STUMPPED
    Any suggestions?
    Cheers
    Dallas

    Should I convert just the clips which are out of sync in the DVD, or all of theclips in the FCP timeline?
    If that is the issue, wouldn't I have the problem in the final prores mov as opposed to just when its played dvd to tv?
    Ill try it though. Its an odd problem so its likely to have an odd solution. Willing to try anything at this point.
    Thank you.

  • Are there glitches in iMovie or iDVD that would create problems with viewing a finished project on a standard dvd player?

    Everytime I render a new project in iMovie and share it with iDVD to produce a video, there always seems to be glitches in the finished project.  I have gone back and tried to recreate the slideshow, but have not had a whole lot of luck.  I am wondering if I need to delete the iMovie and iDVD applications from the computer???  If I do that will it fix my problem or will I even be able to redownload the programs without having to pay for them again?  I have spent more time and $$$ trying to get a viewable disc to burn and am ready to get rid of the computer altogether.  Hopefully that will not have to happen, but this is a constant issue that I go through everytime I work on a project.  Any suggestions???

    Hi
    Yes and No.
    There are Bugs and ways to make better or Worse DVDs - see if this can help.
    There are two "Bugs" (or at least one)
    • In iDVD - do not go back to video editing program - if You got Chapters set in Your movie - if You try - then now back in iDVD it will ask You to up-date ==> all Chapters will point to Chapter one. Medicine - create a brand new iDVD Project.
    • There MUST NOT BE any Chapter mark set in very beginning of the Movie - or in any transition or within 2 seconds from them.
    DVD quality  
    1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
    • Professional Quality
    (movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
    • Best Performances
    (movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
    • High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
    (movies + menus up to 120 min.) - slightly lower quality than above
    Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
    About double on DL DVDs.
    2. Video from
    • FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
    • iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
    when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
    • iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser ( AND AS MEDIUM - not HD etc as DVD then will suffer in quality ) or rather use iMovie HD 6 from start.
    3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09  this can also be set)
    This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
    4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
    use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
    5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
    6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
    7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
    (I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
    8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
    iDVD quality also depends on.
    • DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
    deliver anything better that this.
    HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
    These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
    Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
    _ Roxio Toast™ 10 Pro incl. BD-component
    _ BD disks and burner if full length movies are to be stored
    _ BD-Player or PlayStation3 - to be able to playback
    The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
    Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
    • HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
    less than 5Gb and Your result will most probably not play.
    • How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
    • Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
    • Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
    iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
    • What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
    other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
    Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
    strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
    Convert to .aiff first and use this in movie project
    • What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
    (If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
    (Dropping a PAL movie into a NTSC iDVD project
    (US) NTSC DVDs most often are playable in EU
    (EU) PAL DVDs most often needs to be converted to play in US
    UNLESS. They are play-backed by a Mac - then You need not to care
    • What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
    • How You encode and burn it. Two settings prior iDVD’08 or 09
    Pro Quality (only in iDVD 08 & 09)
    Best / High Quality (not always - most often not)
    Best / High Performances (most often my choice before Pro Quality)
    1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
    (x4 by some and may be even better)
    2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
    Region codes.
    iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
    DVD Studio pro can set Region codes.
    1 = US
    2 = EU
    unclemano wrote
    What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
    I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
    I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
    For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
    to get this to work I
    • Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
    • Use Verbatim DVD-R (absolutely no +/-RW)
    • Set down burn speed to x4 - less burn errors = plays on more devices
    • No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
    • and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
    • and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start  a brand new iDVD project
    • Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
    • Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
    Try to break the process up into two stages
    • Save as a DiskImage (calculating part)
    • Burn from this .img file (burning stage)
    To isolate where the problem starts.
    Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
    • Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
    • Use Verbatim DVD-R (absolutely no +/-RW)
    • Set down burn speed to x4 - less burn errors = plays on more devices
    • No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
    • and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
    • and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start  a brand new iDVD project
    • Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
    • Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
    TO GET IT TO WORK SLIGHTLY FASTER
    • Minimum of 25Gb free space on Start-Up hard disk
    • No other programs running in BackGround e.g. Energy-Saver
    • Don’t let HD spin down or be turned off (in Energy-Save)
    • Move hard disks that are not to be used to Trash - To be disconnected/turned off
    • Goto Spotlight and set the rest of them under Integrity (not to be scanned)
    • Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
    pointer to this - turns on screen saver - to show that it has nothing to show
    • No File Vault on - Important
    • NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
    • Lot's of icons on DeaskTop/Finder also slows down the Mac noticeably
    • Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
    • And let Mac run on Mains - not just on battery
    Yours Bengt W

  • Can I Import AVCHD to produce Standard DVDs in PE7?

    I am in the process of evaluating new digital cameras, probably the Panasonic Lumix DMC-FX700 which records 1920x 1080 Full HD movies in AVCHD format. I am using PE7 and after reading several of the Adobe forums, I still have some compatibility questions, as follows:
    (FYI: I'm using Vista Home Premium with an Intel Core2 Quad CPU Q6600 @ 2.4GHz. and 6GB RAM)
    - Please answer each of my questions, if possible. - Thanks!
    1. Can I bring the 1920x 1080 Full HD AVCHD format into PE7 AND PS7 as easily as with my MPEG and MJPEG formats?
    2. I have read that the AVCHD videos experienced "jitter" when used in PE7.
    a. Is this to be expected with PE7 and AVCHD?
    b. If a problem can be avoided, which NTSC presets do I use?
    3. I want to create a project containing still photos and movies mixed together; then burn to a standard DVD; play the DVD with jitter free, movie quality comparable to that obtained with my MPEG and MJPEG movies on a non-BlueRay player and view the project on a 50" plasma TV. I am NOT interested in burning a BlueRay or an AVCHD formatted DVD.
    a. Which "Sharing" format do I use for burning a DVD to meet my requirements?
    Thanks for the help.

    Actually, AVCHDs load into Premiere Elements EASIER THAN mjpegs because the program is designed to use them (as long as you set up your project with a project preset that matches your AVCHD source specs).
    Version 9 will even edit AVCHDs natively. That means that you don't have to render them before you edit them, as you did in earlier versions (including version 9). If you're going to edit AVCHDs, you really should get version 9. It handles them much more effciently.
    But regardless, you won't see jitter related to the source files. Not with AVCHDs, if your project is set up properly.
    You WILL however, need a powerful computer. At least a quad core or i7 computer. Otherwise the program will work very slowly.
    The best advice for creating a DVD is to output your finished AVCHD video first using Share/To Computer/AVI using the DV settings. Then open a new project set up for DV, load the AVI to your timeline and output your DVD from there (using Share/To Disc). This will give you a sharper final video and will save you hours of rendering time.

  • Premiere Elements 12 -Only buring HD but really want standard DVD

    My video project is made up of HD video footage; however, I need to burn to Standard DVD for distribution to a number of volunteers who are featured.
    I have chosen DVD - Disc (both wide and standard) -- each time the video comes out in HD and will not play on standard DVD players or in the non-Blu Ray burner on my computers. I see no options in Premiere Elements 12 to override burning in HD.
    I've never had the problem with previous videos using same software and computer. Although those were a different selection of blank DVDs.
    Is there a solution or is it possible that I purchased blank Blu Ray DVDs instead of standard. There is no labeling left on my DVD stack of 100  (also nothing on individual discs) although the center ring is surrounded by a blue ring.
    Is there any other way to tell if they are Blu Ray and not standard DVDs?
    Thanks,
    Bill

    BillMMBill
    There appears to be a basic misunderstanding here of the burn to options in Premiere Elements 12 in particular.
    Please allow me to explain, and please excuse anything that I will write that you already know....
    The regular DVD player will playback DVD-VIDEO Standard (4:3) or (16:9). Assuming a NTSC setup, that is characterized by
    720 x 480 4:3 @ 29.97 interlaced frames per second and 720 x 480 16:9 @ 29.97 interlaced frames per second. When these are
    the choices that you want, you use
    Publish+Share
    Disc
    DVD
    disc with Presets = NTSC_Dolby Digital (for the 4:3) and NTSC_Widescreen_Dolby DVD (16:9)
    You do not use
    Publish+Share
    Disc
    AVCHD disc (which is a HD AVCHD format on a DVD disc....this will not playback on the regular DVD player....here you can expect
    resolution of 1920 x 1080)
    The only possibility for you obtaining what you say relate to you selecting AVCHD instead of DVD. Is that a possibility?
    There is no Blu-ray DVD disc or ACVHD DVD disc; there is Blu-ray disc format on a Blu-ray disc, AvCHD format on a DVD disc, each differing from DVD-VIDEO format on a DVD disc.
    As for DVD discs, 4.7 GB/120 minutes; 8.5 GB/240 minutes.
    As for Blu-ray discs, 25 GB or 50 GB.
    If you have a HD 16:9 project and you want to take it to a DVD disc that will playback on the regular DVD player, then you use
    Publish+Share
    Disc
    DVD
    disc with a preset specifically for NTSC_Widescreen_Dolby DVD which is 16:9.
    Please review and consider.
    Thank you.
    ATR

  • How do I best compress a multi file project in Encore CS5 to fit a standard DVD?

    Hello,
    I have created a series of small films in Final Cut Pro X, they have been exported as seperate audio and video tracks, ac3 audio and mpeg video from the presets in FCPX.
    I want to use Encore CS5 to create DVDs out of them and I have used it before but only know the basics. The problem is that after I import all the media files, that I want on the first DVD, as assets and put them on the timeline it adds up to 7.23 GB, even though the time is just under 2 hours. I know that that might be pushing it a little bit in regards to the amount of time that I can fit on a regular 4.7 GB DVD, but it should't take up that much space. I removed a bunch of files from the timeline to see what I could fit and only got just under 1 hour. I can see that it is possible to decrease the file sizes, for instance by going to 'file'-'edit quality presets' and doing stuff there, but 'm not sure of the best way to do that.
    In other posts I have seen mentions of encore compressing files to fit automatically, but what i want is a way to fit all the video files, not the audio i guess, to a dvd with minimum quality loss. does anyone know the best way to do this?
    the only thing i can think off is either to use more DVDs than I feel that I should have to, or to burn a 7.23 GB image and then shrink that using soomething like DVD shrink, but that seems unecessary.
    So I have a feeling that there is a smart way to do this and would appreciate any help.
    Thanks. Nik

    hello,
    Firstly: John, if I export as a .mov and then import to Encore and transcode there will that mean that the file will be shrunk with minimum quality loss? because the .mov file i get using a simple movie export is massive.
    below follows my findings and more questions. I suppose I should maybe be moving over to a FCPX & Compressor 4 forum. I think I need to do some studies on Bitrate here.
    I tried the option of automatic transcoding in Encore to fit all files on a DVD and the results weren't terrible, in fact they are almost good enough, but not quite. it's sequences with fast movement that really are affected. So Stan, not much difference.
    the problem is that the footage i am working with is pretty poor quality to start with. I am working with a bunch of Super 8 family films that have been scanned on to DVDs.
    In FCPX a film that is 32 Min Pal SD 25p surround sound keeps coming out way to big. Below are some examples:
    -When I export directly from FCPX as a movie (.mov) with the simple export settings and 'keep current settings' the file ends up being a massive 11.16 GB! With all other setting options the file is also expected to be very big ranging from something like 2.3 GB to 23GB.
    -When I send it to Compressor 4 and choose the 'SD video sharing' option for uploading online it ends up at 1 GB. These are the settings and summary:
    Name: SD Video Sharing
    Description: SD for upload to web sharing sites such as YouTube and Vimeo
    File Extension: mov
    Estimated size: 783.36 MB/hour of source
    Audio Encoder
        AAC, Stereo (L R), 48.000 kHz
    Video Encoder
        Width and Height: Up to 640 x 360
        Pixel aspect ratio: Default
        Crop: None
        Padding: None
        Frame rate: (100% of source)
        Frame Controls: Automatically selected: Off
        Codec Type: H.264
        Multi-pass: On, frame reorder: On
        Pixel depth: 24
        Spatial quality: 75
        Min. Spatial quality: 25
        Temporal quality: 50
        Min. temporal quality: 25
        Average data rate: 1.741 (Mbps)
    -When I export the film under the standard DVD export settings I get two files and sizes, one for audio (.ac3) 108.4 mb and one for video .m2v 1.89 GB. The general video setting summary follows:
    Name: MPEG-2 for DVD
    Description: MPEG-2 elementary stream for DVD Authoring
    File Extension: m2v
    Estimated size: 1.89 GB
    Type: MPEG-2 video elementary stream
        Usage:SD DVD
    Video Encoder
        Width and Height: Automatic
            Selected: 720 x 576
        Pixel aspect ratio: PAL CCIR 601
        Crop: None
        Padding: None
        Frame rate: (100% of source)
            Selected: 25
        Frame Controls: Automatically selected: Off
        Start timecode from source
        Aspect ratio: Automatic
            Selected 4:3
        Field dominance: Automatic:
             Selected Progressive
        Average bit rate automatic,
            selected: 7.826087 (Mbps)
        1 Pass VBR enabled
            Maximum bit rate: 9 (Mbps)
        High quality
        Best motion estimation
        Closed GOP Size: 12, Structure: IBBP
        DVD Studio Pro meta-data enabled
    well thanks for the help both of you. it seems that outputting way too big files might be one of the many annoying bugs of FCPX.

  • How to create a standard DVD from HD video footage

    Hi everyone, apologies in advance if my question has no doubt been asked before. This is my first post and I am desperate for some guidance. I’ve scanned previous questions on similar topics and haven’t quite found the same query (or had the confidence to spot if it was the same problem!). Here goes.
    My son recently videoed a family wedding using a:
    1. SONY FX7 Camcorder.
    2. In HD108i
    3. Using mini DV tapes
    4. The video included video footage, it incorporated single pictures from another camera and has a musical score in the background.
    5. My son used Final Cut Pro to edit the film
    6. The finished film is stored on the main memory of his MAC Book Pro and also on a separate external hard drive. At preent it can only be viewed using his MAC linked to the TV directly.
    7. The memory used is…wait for it….20GB!
    While the quality is first class we are clearly struggling to copy it on to a standard DVD that our relative can pop into their ordinary DVD player. I appreciate that the quality may well suffer if we can do this, but I cannot see any other way of getting copies of the video to those who attended in a friendly format. We will keep the master copy in its original format though.
    Assuming that it can be done, would someone please advise me on the procedure? I would be most grateful. I’ve tried Apple technical support, but I might as well be asking for the whereabouts of the lost ark!
    Many thanks in anticipation
    Huppy

    Simple answer: Open iDVD and import the finished movie into it. Let iDVD take care of the DVD encoding for you, choose one of the wedding templates for your menu and burn it.
    More complicated answer: Open the manuals for Compressor and DVD Studio Pro and learn how to use those tools to author DVDs.
    The 20GB of disk space is completely normal for HDV.
    It tells me that your movie is about 100 minutes long. Video takes a lot of space. Hard drives are cheaper than they have ever been.
    Good luck with your project.

  • Can someone just spell it out for me?  Going from FCP HD to DVD SD :-(

    Hey folks. I hate to come here and ask a gargantuan number of questions, but this has been driving me out of my mind. I've tried asking specific question in hopes of simply finding one little problem that will fix my woes, but now it has come to this:
    Can someone just spell it out for me?
    How do I get my DVD going? I'll fill you in with all the knowlege I think you need.
    I shot with Sony's HDR-FX1 and edited in Final Cut. That means I'm working with High defintion. The movie is set and solid, and runs One hour and twenty mintues. I'm trying to get it, the commentary track, the subtitle track, and a slew of video files (also shot in high def) onto one dvd. This goes beyond the 4.8 gig limit. Hence, i have a Dual layer burner, and have been burning onto DVD-R DL disks.
    I've tried downgrading to SD format through steps from this website:
    http://www3.telus.net/bonsai/Step-by-Step.html
    I do all the steps to all of my files, and then start putting them into my DVD STUDIO PRO project. I have a recorded commentary which I add in, and I have written all the subtitles. The disk is in SD mode, and everything fits onto the dual layer disk. I've tried literally a dozen different ways, and something keeps going wrong. Either the menus won't come up, and just the film will play upon inserting, or the subtitle stream doesn't pick up- problem after problem. So, now I ask: Can someone simply spell out to me what steps I need to take to get my HD film onto a Dual Layer SD disk?
    I apologize for how general this question is and how many directions it can go, but I'm at a breaking point after four months of failures. Thank you very much.

    Hi man.
    I don't really know which ways you've taken to put
    the video into dvd studio, but since you're asking
    for a step by step process, then here's what i do:
    - export the entire hour out of FCP to a qt file
    - take that QT file to compressor. the only audio you
    really need is dolby 2.0. this would also reduce the
    file size of video to make things fit in a single
    layer dvd
    I have always found that the 'Dolby 2.0' and '5.1' AC3 settings in Compressor badly affect your audio mix...it collapses the soundstage, takes away a lot of depth and imaging, and smudges the frequency range, so I usually output a 16-bit 48kHz, which holds things together much more nicely when working with a stereo mix. Problem is, for a feature-length films, the resulting output from compressor makes it too big to fit on standard DVD-R's with the M2V picture file. My workaround was to actually take take the original exported FCP QT movie (which has a 48kHz aiff soundtrack to begin with), and only lay the audio part of it in the track timeline in DVD studio pro, then lay the compressed M2V video on top of it. They're both still in sync, unless you picked different in/out points in Compressor. When you 'build' your Video/Audio TS in 'advanced burn' it somehow makes it small enough to all fit onto a DVD, while still maintaining the audio quality of the AIFF, instead of the crappy-sounding 2.0 AC3. Then you just use Toast to burn your disc. The difference in sound quality is night and day. So basically I do the picture in Compressor, but let DVD Studio Pro prepare the audio in the Advanced Burn stage.
    It will be very difficult to get a good-sounding AC3 (what they call 'dolby' 2.0 or the wierd 5.1 encoding they use) unless you mix/master/encode your soundtrack professionally like regular studio films do. Just encoding it in compressor straight out of FCP or ProTools isn't enough. You lose too much.

  • I have 8mm films transferred to .avi files at 18fps.  Can I use Final Cut Express to convert to standard DVDs to play on a US TV?

    I have 8mm films transferred to .avi files at 18fps.  Can I use Final Cut Express to convert to standard DVDs to play on a US TV?

    Hi
    I was hoping that FCE would be able to handle the coversion from 18 to 30fps but that appears not to be the case.
    It does - If I'm not totally wrong. Can be to much using FinalCut Pro (6)
    Start FCE
    Select type of project You want to do
    I guess - NTSC 29.97fps - Select that from FCE menu / Easy Set-up
    Start a new Sequence
    DROP A PHOTO in TimeLine - at beginning.
    Now project is locked to 29.97 fps
    Now import and drop the 18fps clip in TimeLine.
    Select to convert it to match the setting of TimeLine.
    IF THIS IS A GOOD WAY - I hesitate to say - It works - but if quality is OK or not - I don't know
    I DO : use JES_Deinterlacer (free from Internet) to convert the frame rate in my clips (usually 25fps) to 29.97 fps - Then and first then I import the converted clip into FinalCut to be used in my NTSC projects.
    The quality done in this way - is very good and the program is free - so I can not want any better.
    Yours Bengt W

  • CS4 and pillarboxing 1920x1080 AVCHD to 16:9 DVD NTSC

    I'm new to Premiere CS4.  I'm using Canon HF11 30p MTS files, so I'm  using the 1080i30 (60i) settings.
    I Import my AVCHD files.  When I try to  use Adobe Media Encoder CS4 to downsample the 1920x1080 AVCHD to 16:9  DVD NTSC or DV I get  pillarboxing on the sides of the DVD file.  I don't in  any of my other video editing programs.  Why do I ONLY see this in Premiere, and  how can I fix it?  I've never seen a video editor not 'stretch' the video to fill the entire 720x480 'screen' with the correct aspect ratio played on the TV.
    I read about and already understood apect ratios:
    http://help.adobe.com/en_US/PremierePro/4.0/WS03BF7479-8C7B-4522-8C75-210AD102524Ea.html#W S9058AE69-455C-49c2-AD1B-35DA227B376Aa
    And this sounds like it's about my problem but doesn't help since the MPEG2-DVD setting in AME doesn't allow me to choose square pixels:
    http://kb2.adobe.com/cps/325/325883.html
    Here's the output showing the pillarboxing:
    Here's the source tab:

    For CS4, Adobe "fixed" the non-square pixel aspect ratios to conform to BBC and Orange Book standards.  For years Adobe apps have had the wrong PARs.  It's now been fixed across the entire suite of Adobe applications.  The technical solution involves Production Aperture, Clean Aperture and more math than I care to review.
    If you'd like to try to get your head around it, this link may be helpful:
    http://www.bbc.co.uk/commissioning/tvbranding/picturesize.shtml
    The bottom line is that what you are seeing now is correct.
    -Jeff

  • DVD for European standards DVD players

    I have to burn DVD in FCPX and send it in Europe.  Can I use the same setting  (720x480 30fps)and if not  how to burn DVD in FCPX that can play on European standard DVD players?

    All modern European DVD players will handle 25, 29.97, 23.98, and 24fps.

  • AVCHD files can be output to make standard DVD?

    Basic question.  My HD camera uses AVCHD files.  I presume CS5 can take these to output them as a standard DVD, rather than Blu-Ray?

    You might also want to see Jeff Bellune's TUTORIAL on going from HD to SD with highest quality.
    Good luck,
    Hunt

  • Recording standard dvd from completed FCP project thru DVD STUDIO PRO...

    OH, kind geniuses...
    it boils down to this...I'm very FCP friendly...production is done...I'm aware of "compressor" issue...one question tho
    ...is it easier to compress thru Quicktime movie or the
    standard compressor functions when project is completed...
    BOTTOM LINE...is it possible to crank out a standard DVD copy of a completed FCP project QUICKLY/ EASILY...thru
    DVD STUDIO PRO? i've went thru the manuals for ALL, and am
    affraid I'm reading T.M.I. into it... THE question..."is there a simple Wham-Bam-Thank You-Maam way to get a simple
    DVD copy from a completed FCP project THRU, (the dreaded)
    DVD STUDIO PRO??? I don't need to re-learn digital electronic theory...just crank out a gawl-dern DVD I can
    present to a perspective employer that needs a FCP editor...
    "much gnashing of teeth & lament",
    thanks folks!
    G. Tirebiter
    mac G-5   Mac OS X (10.4.7)   final cut studio

    whoaohohohohohohoh nnnnnnneleeeee(a keith jacksonism)
    silal..............
    way too much info, amigo....I have one track (2min total...
    including "live-type" graphics)....we don' have no marks....
    we don' need no marks....we don' got to cho you any steenking marks!!!!! (Alfonso Bedoya from "treasure of Sierra Madre"..adaptation)...I love that guy/scene...back to the problem at hand...waaaay too involved it seems, my
    friend....tho, I high 5 you for the extensive work & effort.
    I'm lookin' for quick & dirty...did get a response that basically gives me that...still left out some "see spot run"
    info that my "little grey cells" aren't absorbing...I'm
    sure it's MY ignorance & comprehension skills that are in question here...I guess I wanna' get outa' th' gate & grab th' hole shot before I dial in my ride...like I said..."see spot run"....another try would be appreciated but not necessary...thanks for you're valuable time...
    they're in.......everybody's eggs...
    DOH!....
    G. Tirebiter
    mac G-5   Mac OS X (10.4.7)   final cut studio

  • My dvds that are made from iDVD will not play in a standard dvd player. Can anyone help me?*

    I am running iDVD v 7.1.2(1158).  I used to be able to make dvds that would play in a standard dvd player.  As of today I cannot.  I do not know what has changed and I do not know what needs to be updated.  Can someone assist me?
    The dvds that I can make will play from a disk image and they can play perfectly fine in a computer but not in a standard dvd player.  I am using an external dvd burner, (The same one  have always used) to create the dvds.  I am using iDVD to author them. 
    Here is a list of my hardware.
    HL-DT-ST DVDRAM GSA-5120D:
      Firmware Revision:          A102
      Interconnect:          USB
      Burn Support:          Yes (Generic Drive Support)
      Profile Path:          None
      Cache:          2048 KB
      Reads DVD:          Yes
      CD-Write:          -R, -RW
      DVD-Write:          -R, -RAM, -RW, +R, +R DL, +RW
      Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
      Media:          To show the available burn speeds, insert a disc and choose View > Refresh
    iDVD:
      Version:          7.1.2
      Last Modified:          7/19/11 8:19 PM
      Kind:          Intel
      64-Bit (Intel):          No
      Get Info String:          iDVD 7.1.2, Copyright © 2001-2011 Apple Inc. All rights reserved.
      Location:          /Applications/iDVD.app
    Can anyone help me?  The dvds are not even detected

    • Material used: Video-Codec and Photo file format and Audio file format - matters too. I use
    - Video - StreamingDV .dv or AIC
    - Photos as .jpg (only)
    - Audio as .aiff 16bit 44.1kHz or 48kHz (ONLY - never .mp3 or directly from iTunes - all converted to .aiff first)
    With this I do not mean any setting in iDVD - BUT the raw material used in iMovie / FinalCut / Avid 100 / Adobe Premiere
    As this usually matters - later in iDVD
    How did You Export from Video-editing program used ? I prefer
    • iMovie HD6 - just drop the movie project icon (NOT iMovie Icon - the PROJECT one) over into iDVD big menu window (avoiding - drop-zones as they are for other tasks)
    • iMovie'08 to '11 - Share to MEDIA BROWSER - AND AS MEDIUM - not HD or other resolution as iDVD does a bad downscaling job.
    • iMovie'13 (version 10.0.x) - Share as 480p - Import this into iDVD
    • FinalCut (Pro or Express) - Export as QuickTime .mov - NO QUICKTIME CONVERSION - IMPORTANT
    • Adobe Premiere - I don't know - not tested Yet
    • Avid 100 - I don't know - not tested Yet
    Cleaning the DVD-burner - If it Burns DVDs OK then that's may be not the problem - But if it only burns CDs OK then either the DVD-burning-laser is dirty or broken.
    It is very easy to kill this DVD-laser as it over-heats if one burns several DVDs in a row. I only burn three at a time - then let it cool down for 30 minutes till next batch of three DVDs.
    Yours Bengt W

Maybe you are looking for