Good night recently my iphone 4s was exchanged for a new one because was defective and was in warranty. the problem is that now I try to use the same apple id on itunes and applications while had bought the old iphone does not appear and I think should ap
good night recently my iphone 4s was exchanged for a new one because was defective and was in warranty. the problem is that now I try to use the same apple id on itunes and applications while had bought the old iphone does not appear and I think should appear. Can someone help?
?
Similar Messages
-
I have been using itunes all day and then it wanted me to install a newer version. When I did it said I can't because it's missing mdsvr80 or something so i downloaded that now it has another error. How do I get itunes back the way it was or to work?
See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562 -
I updated to ios5 on another computer because i was stuck on the recovery mode loop but now the problem is that when i try sync to my current one iphone does not show up or sync at all.. any ideas? gonna try uninstall right now..
There is no way to consolidate iTunes accounts.
Setting up an iPhone has never required creation of a new Apple ID.
You've apparently purchased content with both Apple ID's. Sign into the device with the correct Apple ID and sync the content. -
Dear experts,
I am having an issue when I try to create a WEBI document using Bex query through OLAP connection (Bics).
Due to variables exit, it is not possible to open query pannel in webi to choose wich dimensions to add to the webi document.
The window to select dimensions simply does not appear and I can't move forward!
In RSRT ou Bex Analyzer, the query is running fine without errors.
CMOD code is like this (I believe there is not any error as it is working flawless on other reports for other variable names):
WHEN 'ZREDT1'.
IF i_step = 2.
CLEAR wa2.
READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
* wa2-low = |{ v_year_h }12|.
IF sy-subrc EQ 0.
v_year_h = wa2-low(4) - 1.
CONCATENATE v_year_h '12' INTO wa1-low.
* wa1-low = wa2-low.
wa1-opt = 'EQ'.
wa1-sign = 'I'.
APPEND wa1 TO e_t_range.
ENDIF.
ENDIF.
WHEN 'ZREDT2'.
IF i_step = 2.
CLEAR wa2.
READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
IF sy-subrc EQ 0.
* wa2-low = |{ v_year_h }12|.
v_year_h = wa2-low(4) - 1.
CONCATENATE v_year_h '12' INTO wa1-low.
wa1-opt = 'EQ'.
wa1-sign = 'I'.
APPEND wa1 TO e_t_range.
ENDIF.
ENDIF.
Please provide assistance,
Thanks in advance,
Kind regards,
André OliveiraI solved it.
The problem was due to date coming to exit - as you know some time intervals start at 01-01-1000, and as I was calculating 1000-1 = 999
I was getting and interval from 99901 to 201405. Do not know if it was not working because CHAR NUMC6 was failing trying to recognize interval 99901 - 201405, but probably, this was the issue.
Thanks for your inputs,
Best regards,
André Oliveira -
When I plug in my iphone my charging symbol does not appear and my phone is not charging.
When I plug in my iphone 4 my charging symbol does not appear and my phone is not charging. Do I need a new battery? It is only a year old.
Can you try a different charger/USB lead? Also check the connector on the bottom of the iPhone for pocket fluff
-
Every time I would download games for free, always appear message "Verification Required". How that message does not appear and the free download smoothly.
Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card -
Hi
Please don't make multiple posts, your question has been answered in your other thread.
I have imported my music from my iPhone to my Mac book pro. The problem is that now I can't listen to it. It's stating that my computer is not authorized. How can I authorize?? -
Downloaded Acrobat Assistant but the window with language option does not appear and Acrobat Pro II free trial does not download. I have signed in successfully. Why?
Hi irenedix,
After Adobe Download Assistant is installed, you can start it at any time and select a product to download at the bottom of the window. The list updates as new products become available to download with the Adobe Download Assistant.
Please refer : http://helpx.adobe.com/x-productkb/policy-pricing/download-assistant-faq.html#main_How_do_ I_download_a_trial_version_of_Creative_Suite_or_Elements_software_
Alternatively you can try downloading it from the direct download links available at: http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
Regards,
Rave -
HT201401 While calling a contact his image does not appear it appears only when he calls me
While calling a contact his image does not appear on the screen but when the same contact calls me his image appear on the screen
Hello,
I never drag the group list to mail.
I just type it's name and Mail brings it automatically.
I really don't see the point of starting do what you suggested as it complicate the work flow (using 2 applications to achieve a missing feature...)
I think the point is to simplify things and not complication them.
I need Mail to be flexible, so I can add as many groups or one by one contacts without having the need to use another application and drag from there.
How come no one has thought about that?
very strange and frustrating to know it's not existed in mail.
but thanks anyhow
by the way,
when such a feature missing, does it goes to apple features requests?
shlomit -
Check number confirmation window does not appear and checks become confirmed automatically
We have updated to SAP 9.10.105 PL 00,
and we have two issues with check printing, first when we print check we do not receive a confirmation window and all of the checks show as being confirmed. as soon as be print checks in the payment wizard after the checks have printed we than get an error message.
"no matching records found 'checks for payment' (OCHO) (ODBC 2028) [message 131-183]
the second problem is if I set over flow to blank paper, it will only print one check at a time, and i still do not receive a confirmation window.
I am not sure if the original patch for 8.8 was left out of the 9.1 release.Thanks for this, I found this after posting a message with SAP Support. Just a heads up, they consider it as 'Consulting' function not an 'Application Error' so they will not be a fix. We'll just need to know to make sure users know to un-check this Box.
SAP Note: 0001422688 - Print on Blank Paper checkbox on Checks for Payment
Symptom
Scenario 1:
Check Number Confirmation window does not pop up after Checks have been printed.
You might receive the following error message:
'No matching record found 'Checks for Payment' (OCHO) (ODBC-2028) [Message 131-183]'.
Scenario 2:
User is not able to print batches of Checks either via Payment Wizard or via Document Printing and
the Cheque Number Confirmation window does not pop up.
Cause
Consulting
Solution
The issue could be resolved by uncheck Print on Blank Paper on Banking -> Outgoing Payments ->
Cheques for Payments
'Print on Blank Paper' setting on Checks for Payment is saved per user
SAP Note: 0001059752 - Printing Checks for Payment Skipping the Confirmation Screen
Symptom
Check Number Confirmation window does not appear and the check automatically get confirmed.
Reproducing the issue
Scenario:
Print a Check for Payment Via Document Printing or Directly for the Check for Paymet screen (under
Banking > Outgoing Payments)
Expected Results:
The Check Number Confirmation screen pops-up.
Actual Results:
Check Number Confirmation screen is skipped
Cause
Consulting
Solution
If the option 'Print on Blank Paper' is ticked, the Checks Number
Confirmation window will not pop-up.
Go through the following steps and check the settings:
1. Go to Administration -> System Initialization -> Print Preferences -> Per Document tab,
Document: Check for Payment. Check if the option 'Print on: Blank Paper' is ticked.
2. In Check for Payment document check whether the tick box 'Print on Blank Paper' is ticked.
3. Go to Administration-> Setup-> Banking-> House Bank Accounts. Check in the 'Paper Type' column
if the option Blank Paper is chosen. -
MSI 970A-G46 | Needs to be Exchanged for a new one |
Yup, some stuff happened to it and now I need to exchange it for a new one.
Can someone please show me where I can do that? ThanksQuote from: Gregrs on 18-September-14, 07:59:01
I just had it looked at by an IT professional, he said that it's the motherboard, so it's not an easy fix.
Anyways, here is my whole computer >>> http://pcpartpicker.com/p/J3YPf7
Definition of "IT professional" varies widely and could mean almost anything... He may be right; he may be wrong. You're a bit elusive on the "stuff happened to it" topic so I'm thinking he may well be right in this case... Nichrome has the correct place to start: where you bought it from. Plead ignorance...and it may be they'll take pity on you. Then again, their pity might extend only as far as you paying the going rate for a new board. Won't hurt to ask, though: often we do not receive simply because we don't ask... -
The problem is that when I try to update my NI-DAQ drivers from 6.5.1 to version 6.7
I have a Win95 based system running Labview5.1 which utilizes the PCI-6025E board with the BNC-2090. The existing version of NI-DAQ drivers is 6.5.1. The problem is that when I try to update my NI-DAQ drivers to version 6.7 I receive the following errors:
1.The new software goes thru all the installation steps upto the point where it displays the message that it needs to restart to complete the installation.
2. The system then reboots and displays the message," Completed Updating Window Files"
3. Then I receive an error:
'Rgdaqhce' performed an illegal operation and will shut down.
4. The window closes and brings me back my normal Desktop display. The NI setup window appears and displays" Installing: Please Wait".
5. Then it goes thru the NI-DAQ setup normally, choosing the PCI-6025E and the BNC 2090 doc options.
6. WHen it gets to the point of selecting Documenatation PAth, Error: NI-DAQ SETup
Cannot find installation information for :322153.
At this point I just choose OK.
Then it proceeds where it request the Development path, LAbview 5.1 and then it proceeds to copy all the files and then states "Installation Complete" and are ready to configure MEasurement & Automation Sys.
7. The Measurement & Automation window appears:
DATA NEIGHBORHOOD
DEVICES & INTERFACES
SCALES.. WHen I click on any one of the above I get the following message:
" The configuration file has been updated from a previous system. If you save changes to this file it will be permanently upgraded to the current version." At this point I choose "OK"
8. Then it states.."you must reboot for the changes to take effect. Would you like to reboot? YEs or No!". where the Data Neighborhood folder never opened..
9. If you choose YES, the system reboots. If I open Measurement & Automation and click on Data Neighborhood again, I get the same above message as in #8 above. If I choose No at anytime to reboot, I get the following Error:
" Explorer- Illegal operation and it will shut down"
Then Measurement & Automation shuts down and brings me back to my windows desktop.
SO no matter what happens I can never get into Data Neighborhood, it keeps going into this cycle.
So I removed NI-Daq version 6.7 and re-installed version 6.5.1.
What recommendations may you suggest in upgrading from NI-Daq 6.5.1 to 6.7 on this system? I would like to take advantage of NI-DAQ 6.7 new feature where LAbview for Windows Data Acquisition Library LLBs now contain function calls to a dynamic link library called LVDAQ.DLL, where the benefit of changing the VIs to call DLL functions instead of code interface nodes, CINs, where thet VI load time is dramatically improved.
Any help with this matter would be greatly appreciated.
In the meanwhile I am searching your support page here to see if there are any similiar situation..I have not come across any as of yet.
Thanks for your help and sorry for such a long email.Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks -
HT2801 USB SuperDrive disc icon does not appear and therefore SuperDrive cannot be used
USB SuperDrive disc icon does not appear and therefore SuperDrive cannot be used.
There is NO advice regarding this issue on Apple Support.
Any recommendations?Also if you don't have this option checked in the Finder Preferences you won't get an icon on the desktop when a disc is inserted.
-
PowerBook G4 boots to unfamiliar login. List of known user accounts does not appear and original admin user name and password is rejected. What is going on here?
There are no children, nor other suspicious characters that have "played" with my computer. One moment I'm in, the next time I turn on/restart the powerbook I'm at a screen with the name of the hard drive and two fields: username and password. Not a list with pictures and names ie 'Katie Jo' with an orange icon and 'Guest' with a silhouette of a head.
In an attempt to remedy this problem, I backed up files using target disk mode and firewire cable. I then, rebooted in single user mode, typed in the correct script and essentially made the computer appear virgin again. Original start up welcome screen display with multiple languages, and then set up prompts such as language, network, and registration. After completing the cues and the "just a few more questions" page, I press continue and am left at a grey standstill, with the continue button greyed out, and no other actions. I'm only able to "go back" by clicking the go back button, all the way to the beginning of the set up, and as I proceed through the steps a second time, I'm greeted with the same halt. What is this? -
I upgrate my iphone from 4S to 6, but my old apps does not appear on at, how can I get them back?
I upgrate my iphone from 4S to 6, but my old apps does not appear on at, how can I get them back?
Did you restore your 6 from a backup of the 4S?
~Lyssa
Maybe you are looking for
-
TS5216 My camera is not working with Skype
I just bought MBA a couple months ago now my camera is not working with skype. all im seeing here you guys said u gonna work on it. I was wondering for how long we have to wait for this to be fixed. I think its unfair if we buy mac product and cant u
-
my ipod is disabled and says connect to itunes but when i connect it dosent let me connect cuz it says it has a passcode so i can get it out of disabled mode what can i do
-
Why is the "Sign Document" option not available in Reader 9.1?
When I open a PDF in Reader 9.1 the "Sign Document" option is grayed out (unavailable) Is this option dependent on which version of Adobe Acrobat was used to create the PDF? As a test, I created a PDF in Acrobat Standard 8.1. I can sign the that PDF
-
For the first time, Bridge won't start-up either from CS3 or the XP Programs areas in Startup. I downloaded and inrtalled the CS3 Bridge 2.1.1 update and it did not help. I get the Message: The app failed to initilize properly (Oxc0000022). Click OK
-
Page Title showing up as 'home' in google
Hello, In the metadatafield: 'Page title' I called the page 'beeldbewerking', but in Google Search the Page Title is showing up as 'home'. What's going wrong? Anyone??? Han