GoodReader USB Transfer Program

GoodReader (an iOS app) has a 32 bit windows program (GoodReader USB) that allows easy drag and drop transferring of folders and files between my windows computer and my iPad.
Upgrading to the newest 64 bit version of iTunes disabled the GoodReader USB transfer program. The program doesn't think iTunes is installed (because it only works with the 32 bit version). GoodReader hasn't upgraded the transfer program yet and I've been told they might not. I use this program several times per week and it's a hardship to loose its functionality.
I uninstalled iTunes, downloaded a 32 bit version of iTunes and tried to install it. Unfortunately, the install doesn't work. The install program essentially insisted that I needed the 64 bit version. I've reinstalled the 64 bit iTunes 12 for the time being. Is there any way to revert to the last version of iTunes that was running on my computer.
Alternately, is there another iOS app (similar to GoodReader) with as good a USB transfer program that lefts me drag and drop folders and files onto my iPad?

-- "iExplorer's disk mounting features allow you to use your iPhone, iPod or iPad like a USB flash drive."
http://www.macroplant.com/iexplorer/

Similar Messages

MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is

MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is not an external device connected.

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

Usb transfer rate decay drastically

hi to everybody,
i have a problem:
when i transfer to an usb, transfer rate decay drastically
tested with USB flash and microSD card with its adaptor; with Mac OS i reach the maximum, for example 10MB/s, and the transfer rate remains constant; if i use arch, it reach the maximum but after some time decay to 2 MB/s.....
is normal ??? anybody have this issue ???

Much has been posted in many distros concerning the USB flash problem.
A tutorial regarding the design of Flash devices reveals the basic problem with Flash in general.
It is designed to perform in u know what..windows. The design sets up Flash in FAT32 and lo and behold it runs best in windows!
Trying to get the industry to design specially for Linux is like trying to get a donkey to move.
There seems to be workarounds for various applied "imbedded" flash for elements of the Linux system such as usr and etc wherein reads and writes are minimal.
Cheaper Flash devices vary widely in performance due to algorithms provided or not.
Flashbench and bonnie++ are programs which provide analysis of Flash devices to determine performance of the devices under various modes. Many of the devices thusly analyzed are listed on the internet for users to examine...Linaro seems to be the main activity for such reports.
One recommend for Linux is to use ext4 and have at least 8GB of memory available..therefore 64bit. There probably are reasons for not going that route for some (including the cost).
Raid is also recommended.
The picture is indeed clouded and has been for years.
Perhaps a way to use FAT in Linux will come along but don't hold your breath!
Last edited by lilsirecho (2011-09-25 15:46:23)

Payment transfer program with PSCD

Hi,
The payment transfer program works if we use FIAP
But when pay vendor invoices through the process of PSCD we have the status paid but we don't see which vendor invoices have been paid.
Does the program works normally with PSCD
Best regards
Salvator

The process payment in PSCD, to make for cash desk and/or payment lot, then
You need configure for payment, the seletion category R- REFERENCE FOR PAYMENT FORM, when to apply the payment.
and aditional in Account balance display, for when to see the balance of contract account or business partner.
When to do the aplication of payment, it need write the invoicing number
I hope that my coment help you

The standard SAP data transfer program for vendors

Hi Experts,
Could u please tell me that wt is the program which is <b>"the standard SAP data transfer program for vendors"</b>?
could you plz tell me what exactly is it?
and itz tcode..
is it the "XK01" only or anything other?
thnx
Message was edited by: sey ni

Hi,
Pl use RFBIKR00 for Vendor Matser upload. Th eProgram documentation is very useful too.
Regards,
Suresh Datti

Invoking 'Intercompany Transfer' program fails with IXFR0004

Hi all,
I'm facing a problem. I tried to invoke the above program from GIS but the request completed with a warning and the log file showed the error 'IXFR0004 - No transactions found to process'. But if i query the invoices for the period, in those screens it clearly states 'Transfer to Sender as No'
What may be the reason?
Miranga

Please review (FRM-99999: Invoking the Intercompany Account Transfer Program [ID 1071882.6]) and see if it helps. If you still have the same issue, please log a SR.
Thanks,
Hussein

Failed to execute custom transfer program

I have already looked at the custom transfer transport thread
I checked all the parameter but still failing
If anybody has done this before
Please let me know what kind of transfer program uses
and the configurations
specially the custom transfer arguments
This is the trace file
880 1996 FIL-052031 3/2/2010 3:33:21 PM |Data flow DF_Info_SAP
880 1996 FIL-052031 3/2/2010 3:33:21 PM Failed to execute the custom transfer program <C:\temp\psftp.exe harmp001 ****** tlsrv003.com
880 1996 FIL-052031 3/2/2010 3:33:21 PM $AW_SAP_WORKING_DIR prm_Info.dat
tls\LANDING\>. Its return code and error message are <rc =
880 1996 FIL-052031 3/2/2010 3:33:21 PM 1. Error message: PuTTY Secure File Transfer (SFTP) client Release 0.60 Usage: psftp [options] [user@]host Options:    -V
880 1996 FIL-052031 3/2/2010 3:33:21 PM print version information and exit    -pgpfp    print PGP key fingerprints and exit    -b file   use specified batchfile    -bc
880 1996 FIL-052031 3/2/2010 3:33:21 PM output batchfile commands    -be       don't stop batchfile processing if errors    -v        show verbose messages    -load
880 1996 FIL-052031 3/2/2010 3:33:21 PM sessname Load settings from saved session    -l user   connect with specified username    -P port   connect to specified port
880 1996 FIL-052031 3/2/2010 3:33:21 PM -pw passw login with specified password    -1 -2     force use of particular SSH protocol version    -4 -6     force use of
880 1996 FIL-052031 3/2/2010 3:33:21 PM IPv4 or IPv6    -C        enable compression    -i key    private key file for authentication    -noagent disable use of
880 1996 FIL-052031 3/2/2010 3:33:21 PM Pageant    -agent    enable use of Pageant    -batch    disable all interactive prompts>.
5404 2444 FIL-052031 3/2/2010 3:33:21 PM |Data flow DF_Info_SAP

Did you try using psftp manually from a dos prompt?

Error 7 occurred when generating the data transfer program

Hello All ,
In Master Data Load Process Chain , we get error like
1. System Response
Caller 09 contains an error message.
Diagnosis
Error 7 occurred when generating the data transfer program for the requested InfoSource.
System Response
The data transfer is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
Note : We faced this issue for two days now . Just repeating the load make it success .
If any one faced and fixed this issue . Please let me know .
Thanks in advance .

Hi,
. Initially goto transaction SE38, Run the program RSDS_DATASOURCE_ACTIVATE_ALL. Give your Datasource name, and source system and check the check box for "Only Inactive objects".
This will actiavate the given datasource.
2. Replicate the datasource in RSA1.
3. Try to schedule the infopackage for the datasource which you have activated now.
4. IF infopackage runs through, Repeat the process for all datasources ie uncheck the check box, which means it will activate all datasources for the source system.
Also make sure that there will be enough Back Ground Processor available....
Reduce the parallel process
Thanks
BVR

CATS - Transfer program

In CATS( Cross application time sheet) can we have same sender and receiver cost center ..If so will an transfer program that is RCATSTAL will error out this or will it get posted.
Thanks

Hello,
In fact, on CAT6 there will be no problems, because the following fields:
-> CATSD-SKOSTL - Sender CC
-> CATSD-RKOSTL - Receiver CC
Will only be transferred to CO, which means by using the T-code CAT7.
Regards,
Bentow.

Had Acrobat 7.0 Pro on prior laptop. Got new laptop and unable to load my purchased copy on new machine. Getting message 0cx00000fd. Why can't I transfer program to new computer?

Had Acrobat 7.0 Pro on prior laptop. Got new laptop and unable to load my purchased copy on new machine. Getting message 0cx00000fd. Why can't I transfer program to new computer?

The Error is windows specific error. However try Downloading it from Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

What is the best way to make a 30 minute video lecture taken with my iPad available to my university class? Email and USB transfer do not seem to have the capacity. Thanks!

What is the best way to make a 30 minute video lecture taken with my iPad available to my university class? Email and USB transfer to the PC in the classroom do not seem to work because of the file size. Thanks! Quincy

How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
 Cheers, Tom

Purchasing new iMac (27 i5), what is best method to transfer programs/files/documents from 24" iMAC? What is the best method to remove personal data from OS?

Purchasing a new iMac (27 i5), what is the best method to transfer programs/files,documents from a 24" iMac?
What is the best method to remove personal data from the 24" iMac?

Use setup assistant which is offered when you setup your new Mac. It will transfer information from a Time Machine backup, Clone or another Mac.
It's best to do this during setup to avoid issues with duplicate IDs.
Regards

USB transfer modes

Could any one tell me about the USB transfer modes in X5-01. When I am in PC suite mode, is it safe to copy and paste files to my memory card?. I asked this because one of the songs I copied to my SD card stopped playing at a particular point and then I restarted the phone and now that song is playing completely fine. For some troubleshooting purpose I formatted my mem card and *#7370* my phone for a total reset and started copying all the music files again to SD card in PC suite mode. I disconnected phone from PC and opened the gallery. The gallery is now starting for the first time and displayed a message "Repairing corrupt media Library" and it added all the files. Why the media files are corrupted. Is that because I pasted the songs directly to the mem card in PC suite mode other than the Mass Storage mode?. What is the significance of Mass Storage mode.

If I was putting music on a memory card , I'd incert card in PC load up all the music an simply replace in phone ! May hep reading these also !
/t5/Nseries-and-S60-Smartphones/Can-t-refresh-N97-music-library/ta-p/948327
/t5/Nseries-and-S60-Smartphones/Album-art-in-Music-Player/ta-p/948321
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

USB transfer hangs, Finder freezes - cannot relaunch Finder

Is there a way to FORCE a relaunch of the Finder when it hangs during a USB transfer (to a mobile phone) ?
I use Relaunch Finder, Actitivity Monitor, etc, to no avail. The Finder will not re-launch.
Everything else works (such as this Safari use of Apple Forums).
Restarting the Mac is a drag.

Eric,
I really thank you for your quick response. Before I try that, I need to explain something I just did- My time machine backup external hard drive is actually a guardian maximus 2 slot raid 1 setup to mirror so I have 2 disks. Before I do anything to reset time machine, I took that Guardian Maximus and tried to connect direct to my computer to read it. It would not recognize it. then I took out BOTH hard drives and tried to read them individually. Disk Utility said BOTH needed repair. The odd thing is that the Guardian lights did not turn red on either one- both lights green. Which is what its supposed to do. Any suggestions based on this information?
I really do appreciate all you in the forum provide.
Skip

Slow USB transfer

I can't figure out how to replicate this yet, but it's happened twice today. I'm stuck and don't know what to look at next, but it's a problem.
My USB transfer speeds slowed to a crawl on a 2GB directory copied via Ranger just now, and earlier on a larger transfer. Several GB took ~2 hours over USB 2.0 from ext4 HDD to fat32 USB. The USB stick is RadioShack's GigaWare brand and shows up as Sandisk in lsusb, and never been formatted since i opened it.
Looks like ehci_hcd is loading properly for the disk. usb 8-2 is my mouse. Got a USB fan plugged in (one 5V one), too.
I haven't modified the udev rules and usually let udiskie mount things.
dmesg | grep usb
[304447.009631] usb 1-3: reset high speed USB device number 2 using ehci_hcd
[304447.239650] usb 8-2: reset full speed USB device number 2 using uhci_hcd
[306484.456105] usb 2-1: new high speed USB device number 7 using ehci_hcd
[306484.581252] scsi10 : usb-storage 2-1:1.0
[309421.079092] usb 2-1: USB disconnect, device number 7
[324573.564350] usb 8-2: USB disconnect, device number 2
[372694.409521] usb 8-2: new full speed USB device number 3 using uhci_hcd
[372694.576607] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input17
[372694.576714] generic-usb 0003:045E:0745.0004: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:1d.2-2/input0
[snip]
[496984.930431] usb 2-1: new high speed USB device number 8 using ehci_hcd
[496985.056227] scsi11 : usb-storage 2-1:1.0
[498636.454057] usb 2-1: USB disconnect, device number 8
[499099.880160] usb 2-1: new high speed USB device number 9 using ehci_hcd
[499100.005128] scsi12 : usb-storage 2-1:1.0
[499953.395984] usb 2-1: USB disconnect, device number 9
[659242.307482] usb 2-2: new high speed USB device number 10 using ehci_hcd
[659242.786728] usbcore: registered new interface driver usblp
[661547.446152] usb 2-2: USB disconnect, device number 10
[681909.354822] usb usb3: root hub lost power or was reset
[681909.354862] usb usb4: root hub lost power or was reset
[681909.354902] usb usb5: root hub lost power or was reset
[681909.355014] usb usb6: root hub lost power or was reset
[681909.355053] usb usb7: root hub lost power or was reset
[681909.355091] usb usb8: root hub lost power or was reset
[681909.595249] usb 1-3: reset high speed USB device number 2 using ehci_hcd
[681909.825233] usb 8-2: reset full speed USB device number 4 using uhci_hcd
[788645.857480] usb usb3: root hub lost power or was reset
[788645.857521] usb usb4: root hub lost power or was reset
[788645.857560] usb usb5: root hub lost power or was reset
[788645.857806] usb usb6: root hub lost power or was reset
[788645.857861] usb usb7: root hub lost power or was reset
[788645.857901] usb usb8: root hub lost power or was reset
[788646.097878] usb 1-3: reset high speed USB device number 2 using ehci_hcd
[788646.327888] usb 8-2: reset full speed USB device number 4 using uhci_hcd
[1043552.825767] usb 2-3: new high speed USB device number 11 using ehci_hcd
[1043552.951568] scsi13 : usb-storage 2-3:1.0
[1069442.865548] usb 2-3: USB disconnect, device number 11 # Disk unmounted with udiskie via pcmanfm and physically removed
[1069585.269848] usb 2-3: new high speed USB device number 12 using ehci_hcd # Disk reinserted and mounted
[1069585.394806] scsi14 : usb-storage 2-3:1.0 # Transfer speeds are normal again
I'm not sure where to look next to try to diagnose. There's a bug report that may describe this but i'm out of my depth here.
On edit I'm assuming those power lost/reset events are suspends but not sure.
Last edited by nathan28 (2011-08-24 03:19:46)

First of all, what I'm about to say may be close to worthless... but that never stopped me before
But this caught my eye:
Looks like ehci_hcd is loading properly for the disk. usb 8-2 is my mouse. Got a USB fan plugged in (one 5V one), too.
combined with this:
[788645.857480] usb usb3: root hub lost power or was reset
[788645.857521] usb usb4: root hub lost power or was reset
[788645.857560] usb usb5: root hub lost power or was reset
[788645.857806] usb usb6: root hub lost power or was reset
[788645.857861] usb usb7: root hub lost power or was reset
[788645.857901] usb usb8: root hub lost power or was reset
I have a nettop powered by one of those little 90W "brick" power supplies and if I plug my Hauppage USB TV adapter into the sucker it draws so much power that all hell breaks loose on the system. I can't tell how badly though because the USB keyboard goes dead.
A powered USB hub fixed that issue.
But again, I have no idea if this is even remotely related to your errors.
Another thing (since I'm on a roll with bad advice)... I've got some USB flash drives that are simply dog slow... they just are. Put a different brand into the same slot and do the same operations and the difference is amazing. Plus, you don't mention the size of the USB flash drive, but they are known to get slower on writes the closer they are to being full... that's just how they roll.

GoodReader USB Transfer Program

Similar Messages

Maybe you are looking for