Goods issue in MIGO the requirement qty is different from withdrawal qty
I have Raw material as 50 pcs & semifinished material as 300 Hl & my production order is 50 pcs. But in migo during goods issue it is showing Rawmaterial as 2500 pcs & semi finished material as 15000Hl.
So it is getting multiply with the order qty.
Please provide the solution.
Edited by: ChintanH on Jun 27, 2011 12:04 AM
Chintan,
Check your BOM for finished and semifinished product. What is the BASE qty and what are compeonent qty mantained..
In Std SAP,
IF you maintian for base qty of 1, compoenent qty req is 50 then for production order of finished material of 50, you will need 50*50 = 2500 compoenents qty.
Check and revert,
Santosh Sarda
Similar Messages
-
Unable to delete PO line item if GR qty is different from IV qty
Dear all,
Please help me to check this issue. The PO line item purchased with 10pcs (quantity), and the goods receipt (GR) is 10pcs as well as the invoice verification for 10pcs. However, weeks later, they performed a movement type of 102 to cancel 2pcs back to vendor, but no subsequent movements follow up.
Now, the user wanted to delete this line item in PO, but the system throw out an error message:
"Quantity delivered differs from qty. invoiced (Function not possible)"
Diagnosis: You have attempted to delete an item whose GR and IR quantities differ.
Is there any work-around or solution of how to delete this PO line item?
Thank you and appreciate for helps.
Warm Regards,
EdwinDear both,
Thanks for the prompt reply. This particular material is not applying the "GR-based IV" feature. This is why the user is able to cancel the goods receipt without the cancellation of invoice first.
The reason why the user needs to delete the PO line item for this material is because they need to change the valuation class of the material which they suspect this is the cause. They have clear all the stocks quantity, clear all the relevant open quantity but left this PO line item. They wanted to delete the line item so that they can change the valuation class.
Does it mean that it has to use credit memo to clear the quantity? This transaction was posted in 2007, what would be the impact to FI if I post credit memo in 2008?
Thank you very much for your helps.
Warm Regards,
Edwin -
Goods issue quantity exceeds the ordered quantity
Hi Gurus,
I created a sales order with single line item for 100 MT. Subsequently i created outbound delivery against the order. Now the 100 MT quantity gets copied in the delivery. now i created an additional line item in the same delivery for 10 MT against the same material . After this i did the PGI. To my surprise system allowed to do the PGI for this additional item that i had added. Now in this case the goods issue quantity exceeds the Sales order quantity. How can i restrict such functionality.
My requirement is that the goods issue quantity should never exceed the ordered quantity in any case. Moreover the line items should be copied directly from sales order and there should not be any scope of adding any additional line item during delivery. The outbound delivery document should be copied from sales order and no manual alterations should take place during delivery or PGI . How can i achieve the same . Please help.
Thanks in advance.Also for your delivery document tpye,under order reference,keep item requirement as '201' so that system will not allow any new entries in the delivery.
Phani Prasad.
P:S: Please check the forum before you post your questions as this query was answered a number of times earlier.
Edited by: phani.prasad on Mar 6, 2012 11:29 AM -
How Goods Issu happens in the Stock transfer process with outbound delivery
Hi,
Can you please explain me how the goods issue happens in the Stock transfer scenario with outbound delivery?
can we use VL02n for goods issue for single delivery doc(Delivery type-RL).
Can we use the transaction VL23 for collective processing of goods issue for stock transfers.
ThanksHi Anil,
->You can use VL02N transaction to do PGI for the outbound delivery in the Stock transfer scenario.
-->But you have mentioned that delivery type is RL -is this returns delivery
Normally NL delivery will be used in STO(Rplenishment
delivery)
-->You can use VL06G transaction for collective PGI
The transaction VL23 for delivery schdule in the back ground
I hope it will help you,
Regards,
Murali. -
Good Issue date in the Sales order should 1 day difference from the MBDAT
For the particular customer, i want to have difference of 1 day in between the material availability date & good issue date in the schedule line. As per standard i can't made any changes in route and shipping point. Suppose material availability date in sales order is 22.09.2010 than my good issue date should be 23.09.2010 in the sales order. Any body having any idea how can we handle this case and what are things we need consider impact of this change.
Regards,
Srinivas.Hi,
I think you can easily enable this in Route scheduling /Delivery scheduling. You have to maintain the load time and pick/pack time as the total of 8hours. If this is done, then after material availability date, one more day will be added and the final day will be considered as GI date.
If you dont want to do this, you only have to enable this by Z by using a user exit where you can add one day to the MBDAT and update that in GI date. -
While executing the query the output is completey different from the query
Dear friends,
We built a query and loaded the data for that infoprovider.
While executing the query the output is completey different from the query what we have built.
Output has no relevance to the query.
Kindly help the same.
Regards,
SathyaHI Satya,
In my opinion the issue is with your front end.
Results should be identical in RSRT, BEx Analyzer (Workbooks) and the ABAP-Web since all three frontend tools use the "ABAP Runtime layer".
It may differ In the Portal where the new "Java Runtime layer". (Java-Web.) is used.
This is given in OSS Note 1296576 - Different Query Behaviour: ABAP - Java.
So i think the problem lies in your analyser. If you are using Analyzer: BI Add on 7.X (Based on 7.10) try and get support package 8.
Hope this helps.
Thanks,
Rahul -
In the info bar at the bottom of the iphoto screen, why is the number of items different from the total?
What version of iPhoto and system are you running? What mode are you in, i.e. Events, Photos?
If it's the Photos mode the number at the bottom will represent the number of photos displayed in that mode or the number of photos selected in that mode. The number will match the number next to the photos mode only when there are no photos in that mode that are selected.
If you click on the Events icon and then back on the photos icon the numbers should match.
OT -
How is the largest cde point differs from UTF-8 to UTF-16
how is the largest cde point differs from UTF-8 to UTF-16
the largest code point is 10FFFF for both of them then how is differ from the fromat
thank you,
Regards,
Jagrut BharatKumar ShuklaIn this specific case there are no differences for code points storing character data because used character set is the same.
But what is your Oracle 4 digits version ?
Are you sure that database character set and national character set are the same ?
In recent Oracle versions, database character set and national character set are different. For example:
SQL> select * from nls_database_parameters where parameter like '%SET%';
PARAMETER VALUE
NLS_CHARACTERSET AL32UTF8
NLS_NCHAR_CHARACTERSET AL16UTF16Edited by: P. Forstmann on 28 sept. 2011 18:51 -
I got my Apple TV from US but I live in India where the electric voltage is different from US we have 220 voltes here in India so can I use it in India without any Votage converter thing?
According to the technical specifications of the apple tv it "has a universal power supply". I live in korea, but am a US citizen and my place has all US standard power so I can't really comment. However below is a link for your reference.
http://support.apple.com/kb/SP598 -
I brought a new ipad mini with retina. The color saturation is too low to me, especially the purple. My wife started to complain because the color is really different from inphone and ipad. Can user adjust that?
Other than a couple of minor adjustments, such as the one that Diavonex suggested above, there is nothing that a user can do in settings to adjust color. There is no way to calibrate the color like you can do with a computer monitor.
-
How to change the g/l a/c being used while doing goods issue using migo
when I pass a migo entry whilie purchasing material
, the entry goes through stock
stock (230000 a/c no) 150 dr
GR/IR (150000 a/c) 150 cr
when I issue material after reservation for which again migo is done
entry is
repairs to plant and mach (4800569 a/c) 175
stock (230000 a/c no) 175
The stock a/c is debited and credited due to t.code obyc where for inventory posting I have assigned a/c 2300000 for valuation class assigned to material.
now I want to have a/c no 4800689 in place of 4800569. how can i change that.
that is when I issue material from stock this should be debited to 4800689 instead of 4800569. please provide t.code to change the gl from 4800689 from 4800569
full points will be awardedcontinuing my issue is it possible to that we donot have to change the gbb and vbr and still we can have the desired results.
that is we are able to use different gl for debit while doing goods issue from a single stocked material
or we want to have this result
1. repairs to p&m 1000 dr
stock of cement a/c 1000 cr
2. repairs to building 2000 dr
stock of cement a/c 2000 cr.
3. construction 3500 dr
stock of cement 3500 cr
we donot want to change the GBB and VBR every time or change the GL a/c while doing reservation.
is there any third option where we get the desired result without changing or entering the g/l manually
if there is please let me know the t.codes -
Batch determination not working during goods issue in MIGO screen
Hi,
We have configured search strategy according to shelf life expiration while doing the goods issue with movement type 201, 351 etc. Now when I do goods issue in MB1A for movement type 201 or in MB1B for movement type 351, by entering the * and clicking enter, system proposes the batch nos of the material according to the shelf life expiration. But when I do same procedure in MIGO screen, while entering * in batch field system does not propose the batch nos., instead it gives error as "use of special characters are not allowed"
How the above problem can be resolved?
Thanks in advance,
SatishThanks Aroop & Jurgen
I have done the settings as per your suggestions by maintaining the Stock Determination Group. However It picks the batches as per FIFO and not as per shelf life expiration. Also same is the case with MB1A or MB1B.
The reason I wish to use MIGO instead of MB1A or MB1B is as follows
Suppose STO is made of say 10 line items (all Batch managed items). Now while issuing the goods, say for the seventh item there is no stock available then I can not bypass this item (it asks for enter the batch no. even though I change the quantity to zero) and I have to abort the complete transaction. But in case of MIGO I can bypass this item by unchecking the item OK check box.
Any inputs on the above will be helpful.
Thanks,
Satish -
Goods Issue to increase the stock levels in a plant
Folks,
I am not a MM guy and I am trying to increase the stock levels in a plant using a Goods issue.
1. Can I do the Goods Issues without reference to a Purchase Order? If so, how can I do this
2. What are the relevant movement types when GI is made w/o reference to a Purchase Order?
3. Can GI be made with reference to any other entity/object other than PO?
Thanks1. Can I do the Goods Issues without reference to a Purchase Order? If so, how can I do this
No u can't ..u have to do Goods receipt for a PO
Raise a PO for the same material and do GR
2. What are the relevant movement types when GI is made w/o reference to a Purchase Order?
u cant do GI for PO
3. Can GI be made with reference to any other entity/object other than PO?
GI aganist cost centre, production order, reservations ....
the easier way to bring in stock of a material is to do intial entry thru MB1C with mvt type 561. -
Good issues to cost center with extra charges 10% from cost
Hiii Guy,
My user would like to charge the cost center 10% from cost when good issues to cost center is perform,
can we do it in sap ?The scenario is like this,
Only Merchandise Department have the authority to ordering merchandise item from vendor, when other depart required that merchandise item, Merchandise depart will perform GI to that requested cost center.
So Merchandise Depart would like to have extra charge on there extra work. -
What are the requirements to deploy Portlets from Jdeveloper 10.1.3.2
Hi all,
I'm new in version Jdeveloper 10.1.3.2
plz which version of Application Server (infrastructure and middle-tier)
or web-center are required to deploy portlet from jdeveloper 10.1.3.2
can you send me links about these requirments
thanksI had already applied all of this before trying to deploy.
The error seems to be a versioning error in the jsf-impl.jar file as the ApplicationAssociate class is found there. I have changed the JDK and J2EE to 1.4.2 and 1.3 respectively, rebuilt everything, updated all the settings to the right versions for 10.1.2 but it still keeps failing on the deploy.
Maybe you are looking for
-
I thought I was getting more GBs for my ipad so I could download from the APP store and I ended up getting for $20.00 annually more storage for my ICLOUD; this is not what I wanted, how do I get a refund?
-
Block For billing when sales order is created
Hi experts, I have a requirement in which i want to block the sales documrnt for billing when the sales order is created with particular discount value. for this i have checked the condition of discount first it works fine no i want to
-
How to create database in oracle8.0.5 for linux
I install an Oracle 8.0.5 standard edtion for Linux .But when I login sqlplus as 'system'and use 'create database...',it reply that I don't have priviledge!Why? How can I create database anyway?(with which tools or methord?) null
-
Adding a custom stamp to a large number of files.
I need to build a batch process to add a custom stamp to a large number of PDF files. I want to do this without displaying tne files. I'm not sure where to go to learn about how to do this. I've found some sample Jscript code for the for stamps but d
-
How do I restore from a previous backup point in iCloud on an iPhone 4s?
Just got my wife a 4s iPhone. During setting it up, I backed up to iCloud her calendar which wiped out her previous calendar that had been backed up from her iPad. Now the new, blank calendar is on both devices. How do I restore it and get out of the